457627
103
Verklein
Vergroot
Pagina terug
1/108
Pagina verder
103
Troubleshooting—Continued
If you still can’t control your iPod, start playback by
pressing your iPod’s Play button. Remote operation
should then be possible.
Try resetting your iPod.
Depending on your iPod, some buttons may not work
as expected.
The AV receiver unexpectedly selects your iPod
as the input source
Always pause iPod playback before selecting a different
input source. If playback is not paused, the Direct
Change function may select your iPod as the input
source by mistake during the transition between tracks.
Can’t record
On your recorder, make sure the correct input is
selected.
When the Pure Audio listening mode is selected,
recording is not possible because no video signals are
output. Select another listening mode.
There’s no sound
Only components connected to analog inputs can be
played in Zone 2.
The sound changes when I connect my
headphones
When a pair of headphones is connected, the listening
mode is set to Stereo, unless it’s already set to Stereo,
Mono, Direct, or Pure Audio. (Pure Audio listening mode
is not available for North American/Taiwan models.)
The display doesn’t work
The display is turned off when the Pure Audio listen-
ing mode is selected.
How do I change the language of a multiplex
source
Use the “Multiplex” setting on the “Audio Adjust”
menu to select “Main” or “Sub” (page 73).
The u functions don’t work
To use u, you must make an u connection and an
analog audio connection (RCA) between the compo-
nent and AV receiver, even if they are connected digi-
tally (page 37).
The functions Auto Power On/Standby and
Direct Change don’t work for components
connected via u
These functions don’t work when Zone 2 is turned on.
When performing “Audyssey 2EQ™ Room
Correction and Speaker Setup”, the
measurement fails showing the message
“Ambient noise is too high”.
This can be caused by any malfunction in your speaker
unit. Check if the unit produces normal sounds.
The following settings can be made for the
composite video inputs
You must use the buttons on the unit to make these settings.
1. While holding down the input selector button for the input
source that you want to set, press the [SETUP] button.
2. Use the Left and Right [e]/[r] buttons to change
the setting.
3. Press the [SETUP] button when you’ve finished.
Video Attenuation
This setting can be made for the DVD/BD, VCR/
DVR, CBL/SAT, GAME, or AUX input.
If you have a games console connected to the com-
posite video input, and the picture isn’t very clear,
you can attenuate the gain.
Video ATT:OFF: (default).
Video ATT:ON: Gain is reduced by 2 dB.
The AV receiver can upconvert component video and composite
video sources for display on a TV connected to the HDMI OUT.
However, if the picture quality of the source is poor, upconver-
sion may make the picture worse or disappear altogether.
In this case, try the following:
1 If the video source is connected to a component
video input, connect your TV to the
COMPONENT VIDEO OUT.
If the video source is connected to a composite video
input, connect your TV to the MONITOR OUT V
2 On the main menu, select “1. Input Assign”, and
then select “1. HDMI Input”.
Select the relevant input selector, and assign it to
“- - - - -” (page 40).
3 On the main menu, select “1. Input Assign”, and
then select “2. Component Video Input”
(page 41):
If the video source is connected to COMPONENT
VIDEO IN1, select the relevant input selector, and
assign it to “IN1”.
If the video source is connected to COMPONENT
VIDEO IN2, select the relevant input selector, and
assign it to “IN2”.
If the video source is connected to composite video input,
select the relevant input selector, and assign it to “- - - - -”.
Recording
Zone 2
Others
The AV receiver contains a microcomputer for signal pro-
cessing and control functions. In very rare situations, severe
interference, noise from an external source, or static elec-
tricity may cause it to lockup. In the unlikely event that this
happens, unplug the power cord from the wall outlet, wait at
least five seconds, and then plug it back in again.
Onkyo is not responsible for damages (such as CD rental
fees) due to unsuccessful recordings caused by the unit’s
malfunction. Before you record important data, make sure
that the material will be recorded correctly.
Before disconnecting the power cord from the wall out-
let, set the AV receiver to Standby.
Important Note Regarding Video Playback
103

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Onkyo-Tx-sr607

Zoeken resetten

  • medio 18 dec as komt mij zelfpakket nieuwe kpn tv+ (ontvanger)
    Probleem is .Heb een oude analoge dolby seround Onkyo tunerversterker. Hoe moet deze aangesloten worden
    aan mij kpn tv ontvanger. En welke kabels . Heb nu nog humax met scart aansluiting werkt prima het geluid
    van de boxen van de versterker. En beeld op tv via blu ray speler. Wie kan mij helpen?? Gesteld op 10-12-2023 om 03:05

    Reageer op deze vraag Misbruik melden
  • Ik zie het display niet op het TV-scherm verschijnen. Apparat staat in verbinding via HDMI met de TV (Sony) uit 2021. Wat doe ik om wel het display op Tv te krijgen zodat ik instellingen kan wijzigen. Gesteld op 7-5-2022 om 09:57

    Reageer op deze vraag Misbruik melden
  • Bij het instellen van mijn center satelliet en gewone boxen (gebruik ik als basboxen) is optie een verdwenen hoe kan ik deze resetten? Nu krijg ik alleen geluid en beeld alleen via de game poort heeft iemand dit ook ervaren bij de onkyo 607 Gesteld op 6-2-2021 om 14:40

    Reageer op deze vraag Misbruik melden
  • Hoe moet ik mijn Onkyo instellen om dolby surround te krijgen ? Gesteld op 5-6-2020 om 13:27

    Reageer op deze vraag Misbruik melden
  • hoe sluit ik de tv geluid aan de versterker Gesteld op 18-12-2013 om 17:26

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo Tx-sr607 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo Tx-sr607 in de taal/talen: Engels als bijlage per email.

De handleiding is 9,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Onkyo Tx-sr607

Onkyo Tx-sr607 Gebruiksaanwijzing - Nederlands - 212 pagina's

Onkyo Tx-sr607 Gebruiksaanwijzing - Deutsch - 212 pagina's

Onkyo Tx-sr607 Gebruiksaanwijzing - Français - 212 pagina's

Onkyo Tx-sr607 Gebruiksaanwijzing - Italiano - 212 pagina's

Onkyo Tx-sr607 Gebruiksaanwijzing - Espanõl - 212 pagina's

Onkyo Tx-sr607 Gebruiksaanwijzing - Svenska - 212 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info