645345
61
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
61
En
Only the front speakers produce sound
Only the center speaker produces sound
The surround speakers produce no sound
The center speaker produces no sound
The front high and surround back speakers
produce no sound
The subwoofer produces no sound
There’s no sound with a certain signal format
Can’t select the Pure Audio listening mode
Can’t get 6.1/7.1 playback
The speaker volume cannot be set as required
(The volume cannot be set to +18.0 dB)
Noise can be heard
The Late Night function doesn’t work
About DTS signals
The beginning of audio received by an HDMI IN
can’t be heard
When the Stereo or Mono listening mode is selected,
only the front speakers and subwoofer produce
sound.
Check the Speaker Configuration. 37
If you use the Dolby Pro Logic IIx Movie, Dolby Pro
Logic IIx Music, or Dolby Pro Logic IIx Game lis-
tening mode with a mono source, such as an AM
radio station or mono TV program, the sound is con-
centrated in the center speaker.
Make sure the speakers are configured correctly. 37
When the T-D (Theater-Dimensional), Stereo or
Mono listening mode is selected, the surround
speakers produce no sound.
Depending on the source and current listening mode,
not much sound may be produced by the surround
speakers. Try selecting another listening mode.
Make sure the speakers are configured correctly. 37
When the Stereo or Mono listening mode is selected,
the center speaker produces no sound.
Make sure the speakers are configured correctly. 37
Depending on the current listening mode, no sound
may be produced by the front high and surround
back speakers. Select another listening mode.
30
Not much sound may be produced by the front high
and surround back speakers with some sources.
Make sure the speakers are configured correctly. 37
While Powered Zone 2 is being used, playback in the
main room is reduced to 5.1-channels and the front
high, and surround back speakers produce no sound.
49
When you play source material that contains no
information in the LFE channel, the subwoofer pro-
duces no sound.
Make sure the speakers are configured correctly. 37
Check the digital audio output setting on the con-
nected device. On some game consoles, such as
those that support DVD, the default setting is off.
With some DVD-Video discs, you need to select an
audio output format from a menu.
Depending on the input signal, some listening modes
cannot be selected.
3033
(European, Australian and Asian models) The
Pure Audio listening mode cannot be selected while
Zone 2 is on.
If no surround back speakers, and front high speak-
ers are connected, or the Zone 2 speakers are being
used, 6.1/7.1 playback is not possible.
You can not always select all of the listening modes,
depending on the number of the speakers connected.
3033
Check to see if a maximum volume has been set. 44
If the volume level of each individual speaker has
been adjusted to high positive values, then the maxi-
mum master volume possible may be reduced. Note
that the individual speaker volume levels are set
automatically after the Audyssey 2EQ
®
Room Cor-
rection and Speaker Setup function has been com-
pleted.
22, 38
Using cable ties to bundle audio cables with power
cords, speaker cables, and so on may degrade the
audio performance, so don’t do it.
An audio cable may be picking up interference. Try
repositioning your cables.
Make sure the source material is Dolby Digital,
Dolby Digital Plus, and Dolby TrueHD.
47
When DTS program material ends and the DTS bit-
stream stops, the AV receiver remains in DTS listen-
ing mode and the DTS indicator remains on. This is
to prevent noise when you use the pause, fast for-
ward, or fast reverse function on your player. If you
switch your player from DTS to PCM, because the
AV receiver does not switch formats immediately,
you may not hear any sound, in which case you
should stop your player for about three seconds, and
then resume playback.
With some CD and LD players, you won’t be able to
playback DTS material properly even though your
player is connected to a digital input on the AV
receiver. This is usually because the DTS bitstream
has been processed (e.g., output level, sampling rate,
or frequency response changed) and the AV receiver
doesn’t recognize it as a genuine DTS signal. In such
cases, you may hear noise.
When playing DTS program material, using the
pause, fast forward, or fast reverse function on your
player may produce a short audible noise. This is not
a malfunction.
Since it takes longer to identify the format of an
HDMI signal than it does for other digital audio sig-
nals, audio output may not start immediately.
61

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Onkyo-TX-SR578

Zoeken resetten

  • Het is bij mij zo dat ik de laptop en televisie via de versterker kan zien. Als ik mijn laptop aangezet heb wordt er dikwijls, systematisch een seconde of twee, op zwart en stil gegaan. Ik kan dus eigenlijk geen concert bekijken , beluisteren zonder die eigenaardige onderbrekingen. Kan ik daar vanaf? Gesteld op 17-6-2023 om 17:29

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo TX-SR578 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo TX-SR578 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Onkyo TX-SR578

Onkyo TX-SR578 Gebruiksaanwijzing - Nederlands - 140 pagina's

Onkyo TX-SR578 Gebruiksaanwijzing - Deutsch - 140 pagina's

Onkyo TX-SR578 Gebruiksaanwijzing - Français - 140 pagina's

Onkyo TX-SR578 Gebruiksaanwijzing - Italiano - 140 pagina's

Onkyo TX-SR578 Gebruiksaanwijzing - Espanõl - 140 pagina's

Onkyo TX-SR578 Gebruiksaanwijzing - Svenska - 140 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info