Handleiding Onkyo TX-RZ900 (pagina 14 van 142) (Engels)

601862

Verklein

Vergroot

Pagina terug

1/142

Pagina verder

Step 2:

Initial Setup

En-14

The following CEC-compatible devices are found;

Do you wish to turn on the CEC link?

xxxxxxxxxxx

Yes

Source Connection

Exit

SETUP

If you select "Yes", the connection with ARC compatible

TV and HDMI Standby Through function will be set to

"On" and enabled.

Remote Mode Setup

Preprograming remote will give you control

of other devices from AV receiver remote.

Would you like to setup your remote to

control your devices? This may take a while

depending on what and how many you have

connected. You can always come back to remote

setup from setup “7-2 Remote Mode Setup”.

Yes, Continue

No, Skip

Initial Setup

Exit

SETUP

You can enable operation of the other components using

the remote controller of the unit. When the Remote Mode

Setup start screen is displayed, select "Yes, Continue" with

the cursors and press ENTER on the remote controller.

Follow the guidance to select the desired REMOTE MODE

button and in the keyboard screen, enter the first three

characters of the brand name of the device you are going

to program and search for the remote control code. The

guidance will also explain how to set the remote controller.

Network Connection

Do you want to connect network connection ?

It gives you network services that our AV

receiver support. If you wish to skip this step .

select “No. Skip” .

Ye s

No, Skip

Initial Setup

Exit

SETUP

You can check the network connection and make the Wi-

Fi setting. When the Network Connection start screen is

displayed, select "Yes" with the cursors and press ENTER

on the remote controller. If you select "Wired" in the next

screen, you can view the LAN cable connection status. To

make the Wi-Fi setting, select "Wireless", press ENTER on

the remote controller and follow the sections below.

Make the following preparations.

Wi-Fi connection requires an access point such

as wireless LAN router (



). Write down the SSID

and password (key) of the access point if they are

shown in the label of the main body. If the access

point has an automatic setting button (may be

called differently according to the manufacturer),

you can set up without inputting the password.

For how to use the automatic setting button of the

access point, refer to its instruction manual.

＊ The unit supports Wi-Fi connection with 2.4 GHz

access point.

1. Select the method of Wi-Fi connection with the

cursors and press ENTER.

Scan Networks: Search for an access point such as a

wireless LAN router from this unit.

Use iOS Device (iOS7 or later): If you are using an iOS

device, you can connect easily with Wi-Fi just by sharing

the iOS device's Wi-Fi settings with this unit.

If you selected "Scan Networks"

2. Select the SSID of the access point to be connected

with the cursor buttons and press ENTER.

When the SSID of the access point appears on the TV

screen, select the desired access point.

･ If you changed the initial setting of the access point to

skip password entry, step 3 is unnecessary.

･ If you changed the initial setting of the access point

to hide the SSID, see "When the access point is not

displayed".

3. Select and set the authentication method.

The "Enter Password" screen may be displayed

automatically if the wireless LAN router does not have

an automatic setting button.

Select the authentication method.

Enter Password

Push Button

PIN code

Wi-Fi Setup

When this screen is displayed, select and set one of the

three authentication methods: "Enter Password", "Push

Button" and "PIN code". See below for details of and

how to set each method.

Enter Password: Enter the password of the access point

to establish connection.

Select "Enter Password" with the cursor buttons and

press ENTER.

Enter the password (



) on the keyboard screen, select

"OK" with the cursor buttons and press ENTER.

＊ Select "A/a" and press ENTER to toggle between upper and lower

case. Select "



" or "



" and press ENTER to move the cursor to

the selected direction. Select

and press ENTER to delete the

character at the left of the cursor position. To select whether to

mask the password with "



" or display it in plain text, press D on

the remote control. Press +10 on the remote controller to switch

between upper and lower case. Press CLR to delete all the input

characters.

If the security method of the access point to be

connected is WEP, select "Default Key ID", and press

ENTER.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Onkyo TX-RZ900 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Onkyo TX-RZ900

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info