517568
104
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
Appendix
En-104
Operating
procedure
( page 61)
Firmware Update
To update the firmware of the AV receiver, you can
choose from the following two methods: update via
network, or update via USB storage. Choose the one
that best suits your environment. Before proceeding
with the update, please read the corresponding
explanations carefully.
Update via network
You need a Internet connection to update the
firmware.
Update via USB storage ( page 105)
Please prepare a USB storage device such as a USB
flash memory stick. You need at least 50 MB of
available space to update the firmware.
Note
Check the network connection before updating.
Do not touch any cable or device connected to the AV
receiver during the update process.
Do not attempt to access the AV receiver from your PC
while it is being updated.
Do not shutdown the power of the AV receiver while it is
being updated.
The storage media in the USB card reader may not work.
If the USB device is partitioned, each section will be treated
as an independent device.
If the USB device contains a lot of data, the AV receiver
may take a while to read it.
Operation is not guaranteed for all USB devices, which
includes the ability to power them.
Onkyo takes no responsibility whatsoever for the loss or
damage of data resulting from the use of a USB device with
the AV receiver. Onkyo recommends that you back up your
important music files beforehand.
If you connect a USB hard disk drive to the USB port,
Onkyo recommends that you use its AC adapter to power it.
USB hubs and USB devices with hub functions are not
supported. Do not connect your USB device via a USB hub.
USB devices with security functions are not supported.
See the Onkyo web site for latest information.
The AV receiver allows you to update the firmware using
network connection.
Note
Make sure your AV receiver and TV are turned on and the
AV receiver is connected to the Internet.
Never unplug or turn off the AV receiver while it is being
updated.
Never plug or unplug an HDMI or Ethernet cable during the
update process.
Do not attempt to access the AV receiver from your PC
while it is being updated.
Never unplug the power cord during the update process.
It takes up to 20 minutes to complete the firmware update.
The AV receiver will retain all your settings after the update
is finished.
Before Starting
• Set the “HDMI CEC (RIHD)” setting to “Off
( page 78).
• Turn off the controller device connected via RS232
and network.
• Turn off Multi Zone if this function is present.
• Stop playback of contents from Internet Radio, USB
or servers, etc.
Update Procedure
Limitation of liability
The program and accompanying online
documentation are furnished to you for use at your
own risk. Onkyo will not be liable and you will have
no remedy for damages for any claim of any kind
whatsoever concerning your use of the program or
the accompanying online documentation,
regardless of legal theory, and whether arising in
tort or contract. In no event will Onkyo be liable to
you or any third party for any special, indirect,
incidental, or consequential damages of any kind,
including, but not limited to, compensation,
reimbursement or damages on account of the loss
of present or prospective profits, loss of data, or for
any other reason whatsoever.
Updating the Firmware via Network
1
Press RECEIVER followed by HOME on the
remote controller.
The Home menu appears on the TV screen.
2
Select “Firmware Update” and press ENTER.
Note that the “Firmware Update” option will be
grayed out for a short while after the AV receiver
is turned on. Please wait until it becomes
operable.
3
Select “Update via NET” and press ENTER.
Note that this option will not be available if there
is no firmware file newer than the currently
installed version. If the AV receiver is not
connected to the internet, “Update via NET” is
not displayed.
4
Select “Update” and press ENTER.
The update process will begin.
During the update process, the on-screen display
may disappear depending on the updated
program. When this occurs, you can still view the
update progress on the AV receiver’s display.
The on-screen display will reappear after the
update is complete, and upon turning the AV
receiver off and on again.
5
The message “Completed!” appears on the AV
receiver’s display, indicating that the update
has been completed.
104

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo TX-NR929 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo TX-NR929 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Onkyo TX-NR929

Onkyo TX-NR929 Snelstart handleiding - Nederlands - 4 pagina's

Onkyo TX-NR929 Gebruiksaanwijzing - Nederlands - 160 pagina's

Onkyo TX-NR929 Snelstart handleiding - Deutsch - 4 pagina's

Onkyo TX-NR929 Gebruiksaanwijzing - Deutsch - 160 pagina's

Onkyo TX-NR929 Snelstart handleiding - English - 4 pagina's

Onkyo TX-NR929 Gebruiksaanwijzing - Français - 160 pagina's

Onkyo TX-NR929 Gebruiksaanwijzing - Français - 4 pagina's

Onkyo TX-NR929 Gebruiksaanwijzing - Italiano - 156 pagina's

Onkyo TX-NR929 Snelstart handleiding - Italiano - 4 pagina's

Onkyo TX-NR929 Gebruiksaanwijzing - Espanõl - 160 pagina's

Onkyo TX-NR929 Snelstart handleiding - Espanõl - 4 pagina's

Onkyo TX-NR929 Gebruiksaanwijzing - Svenska - 160 pagina's

Onkyo TX-NR929 Snelstart handleiding - Svenska - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info