517568
97
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
Appendix
En-97
Only the front speakers produce sound
Only the center speaker produces sound
The surround speakers produce no sound
The center speaker produces no sound
The front high, front wide and surround back
speakers produce no sound
The subwoofer produces no sound
There’s no sound with a certain signal format
Can’t select the Pure Audio listening mode
Can’t get 6.1/7.1 playback
The speaker volume cannot be set as required
Noise can be heard
The Late Night function doesn’t work
About DTS signals
If the input signal format is set to “PCM” or “DTS”. Set it to
Off”. ( page 76)
When the Stereo or Mono listening mode is selected, only
the front speakers and subwoofer produce sound.
( page 47)
In the Mono listening mode, only the front speakers output
sound if the “Output Speaker” setting is set toLeft /
Right”. ( page 69)
Make sure the speakers are configured correctly.
( page 65)
If you use the Dolby Pro Logic IIx Movie, Dolby Pro Logic
IIx Music, or Dolby Pro Logic IIx Game listening mode with
a mono source, such as an AM radio station or mono TV
program, the sound is concentrated in the center speaker.
In the Mono listening mode, only the center speaker output
sound if the “Output Speaker” setting is set toCenter”.
( page 69)
Make sure the speakers are configured correctly.
( page 65)
When the T-D (Theater-Dimensional), Stereo or Mono
listening mode is selected, the surround speakers produce
no sound.
Depending on the source and current listening mode, not
much sound may be produced by the surround speakers.
Try selecting another listening mode. ( page 45)
Make sure the speakers are configured correctly.
( page 65)
When the Stereo or Mono listening mode is selected, the
center speaker produces no sound.
In the Mono listening mode, only the front speakers output
sound if the “Output Speaker” setting is set toLeft /
Right”. ( page 69)
Make sure the speakers are configured correctly.
( page 65)
Depending on the current listening mode, no sound may be
produced by the front high, front wide and surround back
speakers. Select another listening mode. ( page 45)
Depending on the sources, the sound produced by the
front high, front wide and surround back speakers may be
weak.
Make sure the speakers are configured correctly.
( page 65)
When Powered Zone 2 is used, playback in the main room
is reduced to 7.1 channels and the front wide speakers
produce no sound.
When Powered Zone 3 is used, playback in the main room
is reduced to 5.1 channels and the front high, front wide
and surround back speakers produce no sound.
When you play source material that contains no information
in the LFE channel, the subwoofer produces no sound.
Make sure the speakers are configured correctly.
( page 65)
Check the digital audio output setting on the connected
device. On some game consoles, such as those that
support DVD, the default setting is off.
With some DVD-Video discs, you need to select an audio
output format from a menu.
Depending on the input signal, some listening modes
cannot be selected. ( pages 45 to 52)
The Pure Audio listening mode cannot be selected while
Zone 2/3 is on.
If no surround back speakers, front wide speakers and
front high speakers are connected, or the Zone 3 speakers
are being used, 6.1/7.1 playback is not possible.
Depending on the number of connected speakers, it is not
always possible to select all of the listening modes.
( pages 45 to 52)
Check to see if a maximum volume has been set.
( page 77)
If the volume level of each individual speaker has been
adjusted to high positive values, then the maximum master
volume possible may be reduced. Note that the individual
speaker volume levels are set automatically after the
Audyssey MultEQ
®
XT32 Room Correction and Speaker
Setup has been performed. ( pages 28, 66, 67)
Using cable ties to bundle audio cables with power cords,
speaker cables, and the like may degrade the audio
performance, so refrain from doing it.
An audio cable may be picking up interference. Try
repositioning your cables.
Make sure the source material is Dolby Digital, Dolby
Digital Plus, and Dolby TrueHD. ( page 59)
Make sure that the “TrueHD Loudness Management
setting is not set to “Off”. The Late Night function doesn’t
work when this setting is disabled. ( page 70)
When DTS program material ends and the DTS bitstream
stops, the AV receiver remains in DTS listening mode and
the dts indicator remains on. This is to prevent noise when
you use the pause, fast forward, or fast reverse function on
your player. If you switch your player from DTS to PCM,
you may not hear any sound because the AV receiver does
not switch formats immediately. In such case, you should
stop your player for about three seconds and then resume
playback.
With some CD and LD players, you won’t be able to
playback DTS material properly even though your player is
connected to a digital input on the AV receiver. This is
usually because the DTS bitstream has been processed
(e.g., output level, sampling rate, or frequency response
changed) and the AV receiver doesn’t recognize it as a
genuine DTS signal. In such cases, you may hear noise.
Playing DTS program material, using the pause, fast
forward, or fast reverse function on your player may
produce a short audible noise. This is not a malfunction.
97

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo TX-NR929 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo TX-NR929 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Onkyo TX-NR929

Onkyo TX-NR929 Snelstart handleiding - Nederlands - 4 pagina's

Onkyo TX-NR929 Gebruiksaanwijzing - Nederlands - 160 pagina's

Onkyo TX-NR929 Snelstart handleiding - Deutsch - 4 pagina's

Onkyo TX-NR929 Gebruiksaanwijzing - Deutsch - 160 pagina's

Onkyo TX-NR929 Snelstart handleiding - English - 4 pagina's

Onkyo TX-NR929 Gebruiksaanwijzing - Français - 160 pagina's

Onkyo TX-NR929 Gebruiksaanwijzing - Français - 4 pagina's

Onkyo TX-NR929 Gebruiksaanwijzing - Italiano - 156 pagina's

Onkyo TX-NR929 Snelstart handleiding - Italiano - 4 pagina's

Onkyo TX-NR929 Gebruiksaanwijzing - Espanõl - 160 pagina's

Onkyo TX-NR929 Snelstart handleiding - Espanõl - 4 pagina's

Onkyo TX-NR929 Gebruiksaanwijzing - Svenska - 160 pagina's

Onkyo TX-NR929 Snelstart handleiding - Svenska - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info