553769
82
Verklein
Vergroot
Pagina terug
1/97
Pagina verder
82
Operating Other Manufacturers Devices Using
the Remote Controller
The remote controller has three learning functions. One
is entering the pre-programmed code for a remote con-
troller of another manufacturer. Another is the normal
learning function that enables the remote controller to
learn the codes directly from other remote controllers
(See page 86). And the last is a macro learning function
that enables you to program a series of operations into
the remote controller so that the operations can all be
performed at once by pressing one button (See page 88).
By entering a pre-programming code, you can have the
RC-511M remote controller operate a component made
by another manufacturer. The buttons that are used for
operation are given on pages 84-85.
Caution
With some brand’s components, some buttons may not
work correctly. In this case, program the command
directly from the other remote controller normally (See
page 86).
When entering the code of Onkyo DVD players:
There are three SETTING numbers. Choose the SET-
TING number according to how you will be using the
DVD player.
No. 601/613: These codes are for operating the Onkyo
DVD player by pointing the remote controller directly
at it, either because it does not have an terminal, or
it does but you are not connecting it with an cable.
First enter 601 and if it does not operate properly, enter
613.
No. 600: This code is for Onkyo DVD players that have
an terminal that you are connecting to the
TX-NR801/TX-NR801E with an cable. You will
then operate the DVD player by pointing the remote
controller at the remote control sensor on the
TX-NR801/TX-NR801E. You do not need to enter this
code because it is factory preset. However, if the code
has been changed to 601 or 613, then you will need to
change it back to 600.
Learning a Pre-programming Code
VOL
DISPLAY
Buttons that can
be pre-programmed
Numeric keys
SEND/LEARN
indicator
1
In the table on the next page nd the 3-
digit number for the manufacturer of the
component that you want to operate.
2
Turn on the component that you want to
operate (i.e., DVD, satellite tuner, or televi-
sion).
3
While holding down the MODE button on
the RC-511M that you want to program,
press the DISPLAY button, and then
release both buttons.
The SEND/LEARN indicator lights when the
MODE button is pressed and turns off when the
DISPLAY button is pressed. When the indicator
turns off, release both buttons. The SEND/
LEARN indicator lights again.
4
Within 30 seconds, enter the 3-digit code.
The SEND/LEARN indicator slowly flashes
twice. If the SEND/LEARN indicator quickly
flashes three times, then either a mistaken 3-digit
code was entered or an incorrect operation was
performed. If this occurs, return to step 3.
5
Press the button that you programmed
and check if the system operates cor-
rectly.
If the component does not operate properly,
return to step 3 and repeat the steps above.
If it still does not operate properly, program the
command directly from the other remote con-
troller normally (See page 86).
82

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo TX-NR801 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo TX-NR801 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info