553769
68
Verklein
Vergroot
Pagina terug
1/97
Pagina verder
68
Enjoying Music in the Remote Zone—Continued
Using the buttons on the TX-NR801/TX-NR801E
Notes:
If a sleep time is set with the SLEEP button, the output to the
remote zone will also turn off when the sleep time elapses.
If the REC OUT button is pressed in the main room
while someone is using the system in the remote zone,
the Zone 2 function will be deactivated and the source
will turn off in the remote zone.
If you select FM (or AM) with the TUNER input
source buttons when the source for the remote zone
(Zone 2) is set to AM (or FM), the output for the
remote zone also changes to AM (or FM).
7.1 channel playback in the main room is disabled if the
Surr Back/Zone 2 setting in the Surr Back/Zone 2 sub-
menu of the Hardware Setup Menu is set to “Zone 2.
When you are using the remote zone (Zone 2), the
system operation will not work.
When you are using the remote zone (Zone 2), the
Pure Audio setting will not work.
When you are not using the remote zone (Zone 2),
press the ZONE 2 button and then press the OFF
button to turn off the ZONE 2 indicator. (Using the
remote controller, press the ZONE 2 button and
then the STANDBY button.)
Using the remote controller
Before performing the procedures, press the RCVR but-
ton to enter the receiver mode.
To turn on the TX-NR801/TX-NR801E from the remote zone:
Select an input source:
Adjusting the volume for the remote zone:
Note:
After you press the ZONE 2 button on the remote controller, the
STANDBY indicator on the TX-NR801/TX-NR801E flashes
for five seconds. During this time, you will not be able to per-
form operations in the main zone using the remote controller.
Enjoying Music in the Remote Zone
1
Press the ZONE 2 button on the
TX-NR801/TX-NR801E.
2
Select an input source.
After pressing the ZONE 2 button, you
must press an input source button within
8 seconds. The indicator above the input
source button lights green. In this condi-
tion, even if you change the input source
for the main zone, the input source for the
remote zone (Zone 2) will not change.
Ex.: When the CD button is pressed.
To select the same source for the remote zone
that is selected for the main zone, press the
ZONE 2 button again until
“Z2 Sel:SOURCE” appears in the display. In
this condition, if you change the input source
for the main zone, the input source for the
remote zone (Zone 2) will change as well.
When “Z2 Sel:Off” is displayed, the
output to the remote zone is turned off.
3
Adjusting the volume, press the
or
cursor button.
DSP
A
-
FO
RM LISTENING MODE MEMORY
THX
SURROUNDDIRECT
/
PURE AUDIO STEREO
FM
MODE
MEMORY
ENTER
RE
TURN
SETUP
TUNING
PRESET
ZONE 2
LEVEL
RCVR
ON
ZONE 2
/
Input source
buttons
INPUT
SELECTOR
buttons
DVD
TUNER
PHONO
NET AUDIOC
D
TAPE
VIDEO
3
VIDEO 5VIDEO 4
VIDEO 2
VIDEO 1
TUNI NG
PRESET
After pressing the ZONE 2 button,
press the ON button within 5 sec-
onds.
Be sure to press the ON button while the
RCVR button lights.
After pressing the ZONE 2 button,
press an INPUT SELECTOR button
within 5 seconds.
If tuner is selected with the TUN button,
you can use the CH button to select
a preset radio station.
After pressing the ZONE 2 button,
press the LEVEL / button.
68

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo TX-NR801 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo TX-NR801 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info