553769
58
Verklein
Vergroot
Pagina terug
1/97
Pagina verder
58
Audio Adjust (Advanced)—Continued
a. A/V Sync
If a digital signal processor is connected, there may be
times when the audio and video from a DVD or LD
player is not output in perfect sync. The result is where
the sound and picture do not match and the sound is
heard too early. In such a case, use this setting to prop-
erly synchronize the audio and video. This setting can be
set between 0 and 74.0 ms in 0.5 ms increments. Under
normal circumstances, this can left at 0 ms. If the delay
time is set between 24.5 and 74.0 ms, and upsampling is
used, the delay will be fixed at 24.0 ms. Note that a
change in the setting will not be displayed.
Relative Delay
b. Center, c. Surr L/R, d. Surr Back
Besides level and delay adjustments, this setting provides
the ability to change or adjust the relative speaker position
to fine tune the soundfield for the listener. This is accom-
plished using Onkyo’s unique Enhanced Spatial Position-
ing Algorithm. This adjustment provides 10 milliseconds
of delay for the speakers, which is equivalent to moving
the speaker 10 feet (3 meters) away. This adjustment is set
up to provide –4.0 or +6.0 milliseconds (–4 or +6 feet/–1.2
or +1.8 meters) of adjustment to the listener’s position.
Once the coarse adjustments (i.e., speaker level and distance
adjustments) are made, the system is set up to provide a typ-
ical or broad surround environment. By adjusting the relative
position of the speakers, we are able to alter the soundfield to
be more spread out (deeper) or focused (shallower).
Note:
Surr Back cannot be selected if the Surr Back/Zone 2
setting in the Surr Back/Zone 2 Sub-menu of the Hard-
ware Setup Menu is set to “Zone 2.
This sub-menu is for setting the LFE (Low Frequency
Effect) levels included in Dolby Digital and DTS software.
a. Dolby Digital
The level can be adjusted to either – or between –10 and
0 decibels in 1 decibel increments. For Dolby Digital input
source signals, the LFE level set here is used. A setting of
0 decibels is recommended for optimum performance;
however, if the source is recorded with the low frequency
range too strong, lower this setting as necessary.
b. DTS
The level can be adjusted to either – or between –10
and 0 decibels in 1-decibel increments. For DTS input
source signals, the LFE level set here is used. A setting
of 0 decibels is recommended for optimum performance;
however, if the source is recorded with the low frequency
range too strong, lower this setting as necessary.
Mono Sub-menu
The settings of this sub-menu shown below are enabled
when the listening mode is set to “Mono.
a. Academy Filter
Older monaural film mixes relied on high-frequency
rolloff in presentation to sound properly balanced, so
that excessive hiss from the grain structure of the film
would not be heard. The high-frequency loss was typi-
cally due to a combination of optical slit loss, electrical
filters, loudspeaker response, and screen loss. Some
films have been transferred to video without such a high-
frequency rolloff, and thus sound overly bright and hissy.
The TX-NR801/TX-NR801E includes this “Academy
Filter,” which is based on contemporary playback prac-
tices for such films over wide-range systems.
This can be set to either “On” or “Off.
b. Input Channel
This allows you to set which input channel to use for
monaural sound.
Auto L+R: Select this under normal circumstances. When
the input source is center channel, this center channel is
used as the monaural sound input channel. Otherwise, the
left and right channels are mixed and the mixed signal is
used as the monaural sound input channel.
Left/Right: You will need to select either left or right
when playing a video source that contains bilingual data.
In such a case, the left and right channels will contain the
audio for different languages. Select the channel with the
language you desire.
Setting the Low Frequency Effect
Levels (LFE Level)
3-4.Delay
a.A/V Sync : 0.0ms
Relative Delay
b.Center : 0.0ms
c.Surr L/R : 0.0ms
d.Surr Back : 0.0ms
Quit:[SETUP]
3-5.LFE Level Setup
a.Dolby Digital: 0dB
b.DTS : 0dB
Quit:[SETUP]
Detailed Settings for Each Listening
Mode
3-6.Mono Setup
a.Academy Filter:Off
b.Input Channel
:AutoL+R
Quit:[SETUP]
58

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo TX-NR801 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo TX-NR801 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info