553769
38
Verklein
Vergroot
Pagina terug
1/97
Pagina verder
38
Conguring Input Settings Suitable for Your Connections—Continued
Video Setup Sub-menu
When the default input settings does not suit your con-
nection, perform the following procedures to configure
your input settings.
a. Video
This setting allows you to match the audio from one
component with the video from another. Therefore, you
can set a video source to be displayed while the audio
from another input source is heard. For example, this
allows you to play the music from a compact disc, while
displaying the picture from a video cassette player or
other video source.
The default settings are given below.
The settings in this sub-menu apply to the video and S
video signals. Available options for the video source to
be displayed are “DVD,” “VIDEO 1” to “VIDEO 5,
“Last Valid” and “----.
DVD, VIDEO 1-5: Select either the video signal from
the VIDEO or S VIDEO terminal for each video input.
Last Valid: Select to have the video of the previous
input source continued. For example, if the selected
input source is VIDEO 1, and you then change to CD
(set to “Last Valid”), then the audio from the CD input
is played while the video from VIDEO 1 continues.
----: Set this option when you do not want any video
inputs to be displayed.
b. Component Video
Use this setting if you connect monitors like TV to the
COMPONENT VIDEO OUTPUT jacks on the
TX-NR801/TX-NR801E.
The default settings are given below.
For example, when you connect the DVD player to the
COMPONENT VIDEO INPUT 2 jacks, select “DVD”
as input source and set “b. Component Video” to
“INPUT 2.
Available component video inputs are “INPUT 1,
“INPUT 2,” “VIDEO*,” “Last Valid,” and “None*.
INPUT 1: The video signals from devices connected to
the INPUT 1 of the COMPONENT VIDEO input banks
are used.
INPUT 2: The video signals from devices connected to
the INPUT 2 of the COMPONENT VIDEO input banks
are used.
VIDEO*: The video signals assigned in the “a. Video”
sub-menu setting are used. This option is useful when
no devices are connected to the INPUT 1 and INPUT 2
of the COMPONENT VIDEO input banks.
Last Valid (enables the source last selected): Select to
have the video of the previous input source continued.
None*: No video signals are assigned. When you select
“None,” the OSD screen disappears. If you want to
change this setting later on, use the front panel display
on the TX-NR801/TX-NR801E.
*Valid only when the PAL format is used in an area other than
USA, Canada and Australia.
Note (When the model is for USA, Canada or Austra-
lia and its TV format is PAL):
When the component video signal is output, the infor-
mation on the NET AUDIO and Immediate Display (see
page 63) will not be displayed.
Input source selected Multichannel
CD No
PHONO No
TUNER No
TAPE No
DVD Yes
VIDEO 1 No
VIDEO 2 No
VIDEO 3 No
VIDEO 4 No
VIDEO 5 No
Input source selected Video
CD Last Valid
PHONO Last Valid
TUNER Last Valid
TAPE Last Valid
DVD DVD
VIDEO 1 VIDEO 1
VIDEO 2 VIDEO 2
VIDEO 3 VIDEO 3
VIDEO 4 VIDEO 4
VIDEO 5 VIDEO 5
NET AUDIO Last Valid
2-3.Video Setup
a.Video
:DVD
b.Component Video
:INPUT1
Quit:[SETUP]
Input:DVD
Input source selected Component video input
CD Last Valid
PHONO Last Valid
TUNER Last Valid
TAPE Last Valid
DVD INPUT 1
VIDEO 1 INPUT 2
VIDEO 2 INPUT 2
VIDEO 3 INPUT 2
VIDEO 4 INPUT 2
VIDEO 5 INPUT 2
NET AUDIO Last Valid
38

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo TX-NR801 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo TX-NR801 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info