Handleiding Onkyo TX-NR5008 (pagina 100 van 116) (Engels)

553766

100

Verklein

Vergroot

Pagina terug

1/116

Pagina verder

100

■ Only the center speaker produces sound

■ The surround speakers produce no sound

■ The center speaker produces no sound

■ The front high, front wide and surround back

speakers produce no sound

■ The subwoofer produces no sound

■ The Zone 2/3 speakers produce no sound

■ There’s no sound with a certain signal format

■ Can’t select the Pure Audio listening mode

■ Can’t get 6.2/7.2 playback

■ The speaker volume cannot be set as required

(The volume cannot be set to Max(100.0))

■ Noise can be heard

■ The Late Night function doesn’t work

■ The analog multichannel input doesn’t work

■ About DTS signals

If you use the Dolby Pro Logic IIx Movie, Dolby Pro

Logic IIx Music, or Dolby Pro Logic IIx Game lis-

tening mode with a mono source, such as an AM

radio station or mono TV program, the sound is con-

centrated in the center speaker.

—

In the Mono listening mode, only the front speakers

output sound if the “Output Speaker” setting is set

to “Center”.

Make sure the speakers are configured correctly. 51

When the T-D (Theater-Dimensional), Stereo or

Mono listening mode is selected, the surround

speakers produce no sound.

—

Depending on the source and current listening mode,

not much sound may be produced by the surround

speakers. Try selecting another listening mode.

—

Make sure the speakers are configured correctly. 51

When the Stereo or Mono listening mode is selected,

the center speaker produces no sound.

—

In the Mono listening mode, only the front speakers

output sound if the “Output Speaker” setting is set

to “Left / Right”.

Make sure the speakers are configured correctly. 51

Depending on the current listening mode, no sound

may be produced by the front high, front wide and

surround back speakers. Select another listening

mode.

Not much sound may be produced by the front high,

front wide and surround back speakers with some

sources.

—

Make sure the speakers are configured correctly. 51

While Powered Zone 2 is being used, playback in the

main room is reduced to 7.2-channels and the front

wide and front high speakers produce no sound.

While Powered Zone 3 is being used, playback in the

main room is reduced to 7.2-channels and the sur-

round back speakers produce no sound.

When you play source material that contains no

information in the LFE channel, the subwoofer pro-

duces no sound.

—

Make sure the speakers are configured correctly. 51

The Zone 2/3 speakers only output sources that are

connected to an analog input. Check to see if the

source component is connected to an analog input.

—

Powered Zone 2 cannot be used if “Speakers

Type(Front B)” is set to “Normal”, “Bi-Amp”, or

“BTL”.

—

Powered Zone 3 cannot be used if “Speakers

Type(Front A)” or “Speakers Type(Front B)” is

set to “Bi-Amp” or “BTL”.

—

Check the digital audio output setting on the con-

nected device. On some game consoles, such as

those that support DVD, the default setting is off.

—

With some DVD-Video discs, you need to select an

audio output format from a menu.

—

Depending on the input signal, some listening modes

cannot be selected.

40–45

The Pure Audio listening mode cannot be selected

while Zone 2/3 is on.

—

If no surround back speakers, front wide and front

high speakers are connected, or the Zone 2/3 speak-

ers are being used, 6.2/7.2 playback is not possible.

—

You can not always select all of the listening modes,

depending on the number of the speakers connected.

40–45

Check to see if a maximum volume has been set. 63

If the volume level of each individual speaker has

been adjusted to high positive values, then the maxi-

mum master volume possible may be reduced. Note

that the individual speaker volume levels are set

automatically after Audyssey MultEQ

XT32 Room

Correction and Speaker Setup function has been

completed.

32, 52

Using cable ties to bundle audio cables with power

cords, speaker cables, and so on may degrade the

audio performance, so don’t do it.

—

An audio cable may be picking up interference. Try

repositioning your cables.

—

Make sure the source material is Dolby Digital,

Dolby Digital Plus, and Dolby TrueHD.

Check the multichannel input connections. —

Make sure that the multichannel input is assigned to

the input selector.

Make sure that the multichannel input is selected. 68

Check the audio output settings on your source com-

ponent.

—

When DTS program material ends and the DTS bit-

stream stops, the AV receiver remains in DTS listen-

ing mode and the DTS indicator remains on. This is

to prevent noise when you use the pause, fast for-

ward, or fast reverse function on your player. If you

switch your player from DTS to PCM, because the

AV receiver does not switch formats immediately,

you may not hear any sound, in which case you

should stop your player for about three seconds, and

then resume playback.

—

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Onkyo TX-NR5008 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Onkyo TX-NR5008

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info