553765
157
Verklein
Vergroot
Pagina terug
1/164
Pagina verder
157
Troubleshooting—Continued
The remote controller doesn’t work
Make sure that the batteries are installed with the cor-
rect polarity (page 14).
Install new batteries. Don’t mix different types of bat-
teries, or old and new batteries (page 14).
Make sure that the remote controller is not too far
away from the AV receiver, and that theres no
obstruction between the remote controller and the AV
receiver’s remote control sensor (page 14).
Make sure that the AV receiver is not subjected to
direct sunshine or inverter-type fluorescent lights.
Relocate if necessary.
If the AV receiver is installed in a rack or cabinet with
colored-glass doors, the remote controller may not
work reliably when the doors are closed.
Make sure you’ve selected the correct remote control-
ler mode (pages 15 and 143 to 149).
When using the remote controller to control other
manufacturers’ AV components, some buttons may
not work as expected.
Make sure you’ve entered the correct remote control
code (page 141).
Make sure to set the same ID on both the AV receiver
and remote controller (page 112).
Can’t control other components
If it’s an Onkyo component, make sure that the u
cable and analog audio cable are connected properly.
Connecting only an u cable won’t work (page 47).
Make sure you’ve selected the correct remote control-
ler mode (pages 15 and 143 to 149).
If you’ve connected an u-capable Onkyo MD
recorder, CD recorder, RI Dock to the TV/TAPE IN/
OUT jacks, or an RI Dock to the GAME IN or VCR/
DVR IN jacks, for the remote controller to work prop-
erly, you must set the display to MD, CDR, or DOCK
(page 60).
If you cannot operate it, you will need to enter the
appropriate remote control code (page 141).
To control another manufacturer’s component, point
the remote controller at that component.
If none of the codes work, use the Learning function
to learn the commands of the other component’s
remote controller (page 152).
With some AV components, certain buttons may not
work as expected, and some may not work at all.
To control an Onkyo component that’s connected via
u, point the remote controller at the AV receiver. Be
sure to enter the appropriate remote control code first
(page 142).
To control an Onkyo component that’s not connected
via u, or another manufacturer’s component, point
the remote controller at the component. Be sure to
enter the appropriate remote control code first
(page 141).
The entered remote control code may not be correct. If
more than one code is listed, try each one.
Can’t learn commands from another remote
controller
When learning commands, make sure that the trans-
mitting ends of both remote controllers are pointing at
each other.
Are you trying to learn from a remote controller that
cannot be used for learning? Some commands cannot
be learned, especially those that contain several
instructions.
There’s no sound
Make sure your iPod is actually playing.
Make sure your iPod is inserted properly in the Dock.
Make sure the UP-A1 Dock is connected to the UNI-
VERSAL PORT jack on the AV receiver.
Make sure the AV receiver is turned on, the correct
input source is selected, and the volume is turned up.
Make sure the plugs are pushed in all the way.
Try resetting your iPod.
There’s no video
Make sure that your iPod’s TV OUT setting is set to
On.
Make sure the correct input is selected on your TV or
the AV receiver.
Some versions of the iPod do not output video.
The AV receiver’s remote controller doesn’t
control your iPod
Make sure your iPod is properly inserted in the Dock.
If your iPod is in a case, it may not connect properly
to the Dock. Always remove your iPod from the case
before inserting it into the Dock.
The iPod cannot be operated while it’s displaying the
Apple logo.
Make sure you’ve selected the right remote mode.
When you use the AV receiver’s remote controller,
point it toward your amp.
If you still can’t control your iPod, start playback by
pressing your iPod’s Play button. Remote operation
should then be possible.
Try resetting your iPod.
Depending on your iPod, some buttons may not work
as expected.
You can’t control your iPod if the battery is extremely
low. Use the iPod after recharging for a while.
The AV receiver unexpectedly selects your iPod
as the input source
Always pause iPod playback before selecting a differ-
ent input source. If playback is not paused, the Direct
Change function may select your iPod as the input
source by mistake during the transition between
tracks.
Remote Controller
Dock for iPod
157

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo TX-NR5007 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo TX-NR5007 in de taal/talen: Engels als bijlage per email.

De handleiding is 17,14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Onkyo TX-NR5007

Onkyo TX-NR5007 Gebruiksaanwijzing - Nederlands - 328 pagina's

Onkyo TX-NR5007 Gebruiksaanwijzing - Deutsch - 328 pagina's

Onkyo TX-NR5007 Gebruiksaanwijzing - Français - 328 pagina's

Onkyo TX-NR5007 Gebruiksaanwijzing - Italiano - 328 pagina's

Onkyo TX-NR5007 Gebruiksaanwijzing - Espanõl - 328 pagina's

Onkyo TX-NR5007 Gebruiksaanwijzing - Svenska - 328 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info