492661
75
Verklein
Vergroot
Pagina terug
1/168
Pagina verder
Advanced Operations
En-75
LFE Level
Dolby Digital
*1
, DTS
*2
, Multich PCM, Dolby
TrueHD, DTS-HD Master Audio, DSD
*3
` QdB, –20dB, –10dB, or 0dB
With these settings, you can set the level of the LFE (Low
Frequency Effects) channel individually for each input
sources.
If you find that low-frequency effects are too loud when
using one of these sources, change the setting to –20 dB or
Q dB.
*1
Dolby Digital and Dolby Digital Plus sources
*2
DTS and DTS-HD High Resolution sources
*3
DSD (Super Audio CD) sources
Direct
Analog
Subwoofer
` Off
` On:
Analog audio signals (bass signals) are output.
This setting determines whether or not analog audio signals
(bass signals) are output from front speakers when the Pure
Audio or Direct listening mode is selected.
Note
If the “Subwoofer” setting is set to “No” ( page 67), this
setting cannot be selected.
When Digital Processing Crossover Network is being used, this
setting is not available.
DSD
DAC Direct
` Off
` On:
DSD signals are not processed by the DSP.
This setting determines whether or not DSD (Super Audio
CD) audio signals are passed through the DSP for A/V
Sync, delay, etc., processing when the Pure Audio or
Direct listening mode is selected.
Note
When Digital Processing Crossover Network is being used, this
setting is not available.
Sound Program Edit
Sound Program
` Stereo Source 1, Stereo Source 2, Stereo Source 3,
Multich Source 1, Multich Source 2, Multich
Source 3
When playing back different content types on the same
source, or when listening to a single content type on
different sources, you can pre-register the settings that best
suit each content in “Sound Program”. The registered
settings can then be called up and modified in one set. Use
Sound Program Edit” to register and modify a
combination of settings.
Tip
To select the registered settings, see “Sound Program
( page 58).
Listening Mode
You can assign a default listening mode that will be
selected automatically when you select the sound program.
The “Last Valid” option means that the listening mode
selected last will be used.
The “Straight Decode” option means that straight
decoding listening mode (Dolby Digital, DTS, etc.) is
selected.
Subwoofer
` No, Yes
You can choose whether or not to use the subwoofer with
the sound program.
Music Optimizer
*1
` Off, On
See “Music Optimizer” ( page 60).
Equalizer
*1
` Off
` Manual:
The manual setting in “Equalizer Settings”
( page 70) is applied.
Audyssey
*1
` Off, Movie, Music
See “Audyssey” ( page 59).
Dynamic EQ
*1*2
` Off, On
See “Dynamic EQ” ( page 59).
Dynamic Volume
*1*2
` Off, Light, Medium, Heavy
See “Dynamic Volume” ( page 59).
Dolby Volume
*1
` Off, On
See “Dolby Volume” ( page 59).
Note
•“Listening Mode” is only available when the input signal
matches the setting of “Sound Program”.
You cannot select the “Subwoofer” setting if you set it to “No
in “Speaker Configuration”.
•“Music Optimizer” is only available when “Stereo Source 1”,
Stereo Source 2” or “Stereo Source 3” is selected.
When “Audyssey Quick Start” has been used for measurement,
the “Audyssey”setting cannot be selected.
*1
This setting cannot be used when the “Listening Mode
setting is set to “Pure Audio” or Direct”.
*2
To enable this setting, you must first perform the Room
Correction and Speaker Setup.
75

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo TX-NR3010 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo TX-NR3010 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Onkyo TX-NR3010

Onkyo TX-NR3010 Gebruiksaanwijzing - Nederlands - 168 pagina's

Onkyo TX-NR3010 Gebruiksaanwijzing - Deutsch - 168 pagina's

Onkyo TX-NR3010 Gebruiksaanwijzing - Français - 168 pagina's

Onkyo TX-NR3010 Gebruiksaanwijzing - Italiano - 168 pagina's

Onkyo TX-NR3010 Gebruiksaanwijzing - Espanõl - 168 pagina's

Onkyo TX-NR3010 Gebruiksaanwijzing - Svenska - 168 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info