553762
47
Verklein
Vergroot
Pagina terug
1/104
Pagina verder
47
En
Main menu Speaker Setup
Here you can check the settings made by
Audyssey MultEQ Room Correction and Speaker Setup
function, or set them manually, which is useful if you
change one of the connected speakers after using
Audyssey MultEQ Room Correction and Speaker Setup
function.
Note
These settings are disabled when:
a pair of headphones is connected, or
–theAudio TV Out” setting is set to “On” ( 58) and an
input selector other than HDMI is selected.
Speaker Settings
If the impedance of any speaker is 4 ohms or more but less
than 6, set the minimum speaker impedance to 4 ohms.
If you bi-amp the front speakers, you must change the
Speakers Type(Front)” setting ( 47).
For hookup information, see “Bi-amping the Front Speak-
ers” ( 15).
Note
When bi-amping is used, the AV receiver is able to drive up to
7.1 speakers in the main room.
Before you change these settings, turn down the volume.
Speaker Impedance
` 4ohms:
Select if the impedance of any speaker is 4 ohms or
more but less than 6.
` 6ohms
:
Select if the impedances of all speakers are between
6 and 16 ohms.
Speakers Type(Front)
` Normal
:
Select this if you’ve connected your front speakers
normally.
` Bi-Amp:
Select this if you’ve bi-amped your front speakers.
Note
Powered Zone 2 cannot be used if “Speakers Type(Front)” is
set to “Bi-Amp” ( 75).
Powered Zone 2, Powered Zone 3
See “Setting the Powered Zone 2/3” ( 75).
Speaker Configuration
With these settings, you can specify which speakers are
connected and a crossover frequency for each speaker.
Specify “Full Band” for speakers that can output low fre-
quency bass sounds adequately, for example, speakers
with a good sized woofer. For smaller speakers, specify a
crossover frequency. Sounds below the crossover fre-
quency will be output by the subwoofer instead of the
speaker. Refer to your speaker’s manuals to determine the
optimum crossover frequencies. If you set up your speak-
ers using Audyssey MultEQ Room Correction and
Speaker Setup, please make sure manually that any THX
speakers are set to “80Hz(THX)” crossover.
Subwoofer
` Ye s
:
Select if a subwoofer is connected.
` No:
Select if no subwoofer is connected.
Front
` Full Band
` 40Hz to 80Hz(THX)
to 100Hz, 120Hz, 150Hz,
200Hz
Note
If the “Subwoofer” setting is set to “No”, the “Front” setting is
fixed at Full Band”.
Center
*1
, Surround
*1
, Surr Back
*2*3*4*5
` Full Band
` 40Hz to 80Hz(THX)
to 100Hz, 120Hz, 150Hz,
200Hz
` None:
Select if no speaker is connected.
Front Wide
*1*2*6*7
, Front High
*1*2*8
` Full Band
` 40Hz to 80Hz(THX) to 100Hz, 120Hz, 150Hz,
200Hz
` None
:
Select if no speaker is connected.
Note
*1
Full Band” can be selected only when “Full Band” is
selected in the “Front” setting.
*2
If the “Surround” setting is set to “None”, this setting cannot
be selected.
*3
If the “Surround” setting is set to anything other than “Full
Band”, “Full Band” cannot be selected here.
*4
If the “Speakers Type(Front)” setting is set to “Bi-Amp
( 47), this setting cannot be selected.
*5
If the Powered Zone 2 is being used ( 75), this setting can-
not be selected.
*6
If the “Powered Zone 2” setting is set to “Act” ( 75), this
setting cannot be selected.
*7
If the Powered Zone 3 is being used and
Speakers Type(Front)” setting to “Bi-Amp” ( 47), this
setting cannot be selected.
*8
If the “Powered Zone 3” setting is set to “Act” ( 75), this
setting cannot be selected.
Speaker Setup
Some of the settings in this section are set automatically
by Audyssey MultEQ
®
Room Correction and Speaker
Setup function ( 29).
If you change these settings, you must run
Audyssey MultEQ Room Correction and Speaker
Setup again ( 29).
This setting is set automatically by Audyssey MultEQ
Room Correction and Speaker Setup function ( 29).
47

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo TX-NR1008 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo TX-NR1008 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Onkyo TX-NR1008

Onkyo TX-NR1008 Gebruiksaanwijzing - Nederlands - 204 pagina's

Onkyo TX-NR1008 Gebruiksaanwijzing - Deutsch - 204 pagina's

Onkyo TX-NR1008 Gebruiksaanwijzing - Français - 208 pagina's

Onkyo TX-NR1008 Gebruiksaanwijzing - Italiano - 204 pagina's

Onkyo TX-NR1008 Gebruiksaanwijzing - Espanõl - 208 pagina's

Onkyo TX-NR1008 Gebruiksaanwijzing - Svenska - 204 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info