553756
43
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
43
Listening Mode Setup
Description listening mode parameters
Subwoofer
Set this to Off if you are not using a subwoofer (even if one is
connected). If No is selected for the Subwoofer setting in the
Speaker Config sub-menu, then this setting will not appear.
Re-EQ
Depending on the listening mode, you can either turn Re-EQ on or
off.
Re-EQ: Re-EQ (re-equalization) takes the edginess or
brightness out of your home cinema sound to compensate for
the fact that sound mixed for theaters may sound too bright
when played back through speakers in the home environment.
On: Select to turn on the re-equalization filter.
Off: Select to turn off the re-equalization filter.
Surround Speakers
This setting allows you to decide which speakers to output to when
surround back speakers are connected and you are playing back a
5.1-channel source.
Surround L/R: This outputs the sound to the surround left and
right speakers as normal and outputs nothing to the surround
back speaker.
Surround Back: This outputs the sound to the surround back
speakers and outputs nothing to the surround left and right
speakers. This setting can only be selected when two surround
back speakers are connected to the TX-DS787.
Sur L/R+Back: This outputs the sound to both the surround left
and right speakers and the surround back speaker.
Dolby D/6.1
This setting allows you to set whether or not Dolby Digital sources
will be played back using the matrix 6.1-channel output when a
surround back speaker is connected.
Auto: Automatically outputs signals with EX-identifying
signals using 6.1-channel Dolby Digital.
On: Outputs using 6.1-channel Dolby Digital regardless of
whether or not the signal contains EX identifiers.
Off: Does not output using 6.1-channel Dolby Digital
regardless of whether or not the signal contains EX identifiers
(Dolby D is used).
However, if the surround channel is monaural or nonexistent, the
playback is made using normal Dolby Digital regardless of the
above setting. For Dolby Digital 6.1-channel playback, Dolby D/6.1
is displayed for the listening mode.
DTS-ES
This setting allows you to set whether or not DTS sources will be
played back using the matrix 6.1-channel (DTS-ES) output when a
surround back speaker is connected.
Auto: Automatically outputs signals with ES-identifying
signals using DTS-ES playback.
On: Outputs using DTS-ES playback regardless of whether or
not the signal contains ES identifiers.
Off: Does not output using DTS-ES playback regardless of
whether or not the signal contains ES identifiers (DTS is used).
However, if the surround channel is monaural or nonexistent, the
playback is made using normal DTS regardless of the above setting.
For DTS-ES playback, DTS-ES is displayed for the listening mode.
Dolby D THX Surround EX
This setting allows you to set whether or not Dolby Digital sources
will be played back using THX Surround EX when a surround
back speaker is connected.
Auto: Automatically outputs signals with EX-identifying
signals using THX Surround EX.
On: Outputs using THX Surround EX regardless of whether or
not the signal contains EX identifiers.
Off: Does not output using THX Surround EX regardless of
whether or not the signal contains EX identifiers (Dolby D is
used).
However, if the surround channel is monaural or nonexistent, the
playback is made using normal THX regardless of the above
setting. For THX Surround EX playback, Dolby D THX Surround
EX is displayed for the listening mode.
DTS THX Surround EX
This setting allows you to set whether or not DTS sources will be
played back using the THX Surround EX when a surround back
speaker is connected.
On: Outputs using THX Surround EX regardless of whether or
not the signal contains ES identifiers.
Off: Does not output using THX Surround EX regardless of
whether or not the signal contains ES identifiers (DTS is used).
However, if the surround channel is monaural or nonexistent, the
playback is made using normal DTS regardless of the above
setting. For THX Surround EX playback, DTS THX Surround EX
is displayed for the listening mode.
Front Effect
Some live recordings contain acoustic reverberation. When you
play these sources, more reverberation will be applied by the DSP,
creating too much reverb effects and the sound loses frame or
presence. In this case, set this setting to Off. No reverberation
from the DSP will be applied to the sound output from the three
front channels, so the sound source is be played as it is without any
further reverberation.
Effect Level
This parameter allows you to adjust the strength of sound effects to
match the playback source material, the acoustics of your room,
and such other factors. This can be set to Low, Mid-low,
Middle, Mid-high, or High.
Room Size
This parameter allows you set virtual hall size to simulate for each
surround mode. You can choose from Large, Mid-Large,
Middle, Mid-Small, or Small.
43

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo TX-DS787 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo TX-DS787 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Onkyo TX-DS787

Onkyo TX-DS787 Gebruiksaanwijzing - Français - 74 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info