553756
35
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
35
Input Setup
a. Digital Input
This setting tells the TX-DS787 which input source button on the
front panel is connected with which digital input jack on the rear
panel. To perform this setting, you must first select a digital input
source at the front panel and then set the name of the digital input
jack it is connected to here.
For example, if the input source selected at the front panel is CD
and the compact disc player is connected to DIGITAL INPUT
(OPTICAL) 1, then select OPT1 here. If the input source
selected is not connected to a digital input, then select ----.
OPT1: Select if connected to DIGITAL INPUT (OPTICAL) 1.
OPT2: Select if connected to DIGITAL INPUT (OPTICAL) 2.
COAX1: Select if connected to DIGITAL INPUT (COAXIAL) 1.
COAX2: Select if connected to DIGITAL INPUT (COAXIAL) 2.
––––: Select if the input source is not from a digital input jack.
Note:
Do not assign a digital input to more than one input source. If you
are making a digital connection that requires you to change the
default settings, be sure to always first cancel the current digital
input setting and then assign the new setting.
b. Digital Format
The default setting is All. If ---- is selected for this input
source at the Digital Input setting, then this setting will not appear.
Although you can use this default setting as is, you may change it
as desired depending on the input signal format (e.g., if you know
that you will always be listening to a certain input signal format
from a particular input source).
All: Select for automatic detection of the input signal format. The
input signal format (Dolby Digital, DTS, PCM or Analog)
used by the selected input source is detected automatically to
execute the required decoding process.
DTS: Select for DTS signal processing. The decoding process is
executed only when DTS signals are input.
PCM: Select for PCM signal processing. The decoding process is
executed only when PCM signals are input.
Note:
If All is selected and a compact disc or LD is fast-forwarded
during playback, decoded PCM signals may produce a skipping
sound. In such cases, change the setting to PCM.
Notes on DTS:
If you play a CD or LD that supports DTS when the PCM
setting is selected on the TX-DS787, the DTS encoded signal
will not be decoded and noise will be output. This noise could
damage the amplifier and speakers. Therefore, be sure to
selected All or DTS and use the digital input jacks
(OPTICAL or COAXIAL) to connect the DTS source.
If you play a CD or LD that supports DTS when All is
selected, you may hear a noise for a short while until the DTS
decoder recognizes the DTS-encoded signal and starts
operating. This is not a malfunction.
If you press the PAUSE or SKIP button on the player while
playing a DTS source, a short noise may be heard. This is not a
malfunction. In such cases, try playing the source in the DTS
selected.
The DTS indicator on the TX-DS787 lights while a DTS
source is played. When playback finishes and the DTS signal
transmission stops, the TX-DS787 remains in DTS mode and
the DTS indicator remains lit. This prevents noise when you
operate the PAUSE or SKIP button on the player. Therefore, if
the source is immediately switched from DTS to PCM, the
PCM signal may not be played. In this case, stop the playback
of the source on the player for about three seconds and then
resume playback.
You may not be able to play some DTS source signals from
certain CD players and LD players even if you connect the
player to the TX-DS787 digitally. This is because the digital
signal has been processed (such as the output level, sampling
frequency, or frequency response) and the TX-DS787 cannot
recognize the signal as DTS data. Therefore you may hear
noise when you play a DTS source while processing the signal.
The outputs for the VIDEO 1 OUT, VIDEO 2 OUT, TAPE
OUT, output analog audio signals. Do not record from CDs or
LDs that support DTS using these outputs. If you do, the DTS-
encoded signal will be recorded as noise.
If a compact disc or LD encoded in the DTS format is played
back with PCM selected, only noise will be produced.
Always select All or DTS when playing back DTS-
encoded sources.
c. Multichannel
This sub-menu will not appear if AM or FM is selected at the front
panel for the input source. This setting is normally set to No, and
only needs to be changed to Yes if a DVD player, MPEG
decoder, or other component that has a multi channel port is
connected to the MULTI CHANNEL INPUT port for 5.1-channel,
6.1-channel, or 7.1-channel audio. For example, if a DVD player is
connected to the MULTI CHANNEL INPUT port, then select
DVD at the front panel as the input source, bring up this sub-menu,
and select Yes for the Multichannel setting. You can only select
Multichannel with the AUDIO SELECTOR button when Yes is
selected here.
Note:
When playing a device that is actually connected to the MULTI
CHANNEL INPUT terminal, select Multichannel with the
AUDIO SELECTOR button.
35

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo TX-DS787 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo TX-DS787 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Onkyo TX-DS787

Onkyo TX-DS787 Gebruiksaanwijzing - Français - 74 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info