Handleiding Onkyo PR-SC5530 (pagina 11 van 24) (Engels)

553774

Verklein

Vergroot

Pagina terug

1/24

Pagina verder

Step 2:

Setting Up

"Yes" with the cursors and press ENTER on the remote

controller. Follow the guidance to select the desired

REMOTE MODE button and in the keyboard screen, enter

the first three characters of the brand name of the device

you are going to program (e.g., "ONK" for ONKYO) and

search for the remote control code. The guidance will also

explain how to set the remote controller.



4th Step : Network Connection

Do you want to connect network connection?

It gives you network services that our AV

receiver support. If you wish to skip this step.

select “No. Skip”.

Yes

No. Skip

HOME Ex it

Initial Setup

Network Connection

You can check the network connection and make the Wi-

Fi setting. When the Network Connection start screen is

displayed, select "Yes" with the cursors and press ENTER

on the remote controller. If you select "Wired" in the next

screen, you can view the LAN cable connection status. To

make the Wi-Fi setting, select "Wireless", press ENTER on

the remote controller and follow the sections below.

Make the following preparations.

Wi-Fi connection requires an access point such as

wireless LAN router (

). Write down the SSID and

password (key) of the access point if they are shown

in the label of the main body. If the access point has

an automatic setting button (may be called differently

according to the manufacturer), you can set up without

inputting the password. For how to use the automatic

setting button of the access point, refer to its instruction

manual.

¼

The unit supports Wi-Fi connection with 2.4 GHz

access point.

Select the SSID of the access point to be connected

with the cursor buttons and press ENTER.

When the SSID of the access point appears on the TV

screen, select the desired access point.

r If you changed the initial setting of the access point to

skip password entry, step 3 starts automatically.

r If you changed the initial setting of the access point to hide

the SSID, see "When the access point is not displayed".

Select and set the authentication method.

The "Enter Password" screen, instead of the following

screen, may be displayed automatically if the wireless

LAN router does not have an automatic setting button.

Wi-Fi Setup

Select the authentication method.

Enter Password

Push Button

PIN code

When the screen above is displayed, select and set one

of the three authentication methods: "Enter Password",

"Push Button" and "PIN code". See below for details of

and how to set each method.

Enter Password: Enter the password of the access point to

establish connection.

Select "Enter Password" with the cursor buttons and

press ENTER.

Enter the password (

) on the keyboard screen, select

"OK" with the cursor buttons and press ENTER.

¼

Select "Shift" and press ENTER to toggle between upper and lower

case. Select "



" or "



" and press ENTER to move the cursor to the

selected direction. Select "Back Space" and press ENTER to delete

the character at the left of the cursor position. To select whether to

mask the password with "*" or display it in plain text, press D on the

remote control. Press + 10 on the remote controller to enable the

"Shift" function and CLR to delete all the input characters.

If the security method of the access point to be

connected is WEP, select "Default Key ID", select "OK"

and press ENTER.

Push Button: Use the automatic setting button of the

access point to establish connection.

Select "Push Button" with the cursor buttons and press

ENTER.

Hold down the automatic setting button of the access

point for the necessary seconds, select "OK" with the

cursor buttons and press ENTER.

PIN code: Select this method when the automatic setting

button of the access point is beyond the reach.

Select "PIN

code" with the cursor buttons and press ENTER to display

the 8-digit PIN code. Register the displayed PIN code to the

access point, select "OK" with the cursor buttons and press

ENTER. For how to register the PIN code to the access

point, refer to its instruction manual.

Establish connection.

The connection process starts and the Wi-Fi indicator

on the left of the unit's display starts flashing. When

connection has been established, the Wi-Fi indicator

changes from flashing to staying lit. If the Wi-Fi indicator

does not stay lit, connection has not been established.

Make the setting again. If "Push Button" does not work,

try "Enter Password".

When the access point is not displayed

Select "Other..." with the

cursor on the remote

controller and press ENTER to display the keyboard

screen. Input the SSID and password. Make the

following settings according to the router setting.



WPA/WPA2 method

Select "WPA" or "WPA2" in "Security method", select

"OK" and press ENTER.



WEP method

Select "WEP" in "Security method" and select

"Default Key ID". Then select "OK" and press ENTER.

r If encryption setting has not been made on the

wireless LAN router, select "None" in "Security

method", select "OK" and press ENTER.



Exiting the setup wizard

After finishing the initial setup, keep "Finished" selected

and press ENTER on the remote controller. Connection and

setting of the unit is now completed. See Step 3 and enjoy

your home theater.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Onkyo PR-SC5530 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Onkyo PR-SC5530

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info