462127
36
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
36
En
Others
Troubleshooting
If you have any trouble using the preamplifier, look for a
solution in this section.
Make sure that the power cord is properly plugged into
the wall outlet ( 16).
Unplug the power cord from the wall outlet, wait 5
seconds or more, then plug it in again.
When the set ASb starts running, the preamplifier will
automatically go Standby ( 35).
Make sure the preamplifier’s volume control is not set to
minimum ( 26).
Make sure the correct input source is selected ( 26).
Make sure the preamplifier is not muted ( 27).
Make sure the speakers are connected correctly ( 15).
Check all connections and correct as necessary ( 15).
While headphones are connected, the PRE OUT output
no sound ( 29).
The preamplifier does not support digital formats other
than PCM. Inputting a digital format other than PCM
will cause loud noise.
If the USB connector of your PC does not support the
high-speed 2.0 standard, then audio is not output.
Make sure the POWER switch is set to ON.
Make sure all audio connecting plugs are pushed in all
the way ( 15).
The sound quality can be affected by strong magnetic
fields, such as that from a TV. Try moving any such
devices away from the preamplifier.
If you have any devices that emit high-intensity radio
waves near the preamplifier, such as a cellular phone
that’s being used to make a call, the preamplifier may
output noise.
This may be due to dirty contacts. Clean the headphones
plug. See your headphones’ instruction manual for
cleaning information. Also, make sure that the
headphones cable is not broken or damaged.
Audio performance will be at its best about 10 to 30
minutes after the preamplifier has been turned on and
had time to warm up.
• Using cable ties to bundle audio cables with speaker or
power cables may degrade the sound quality. So don’t
do it.
Lower the volume of the connected AV receiver, and
release “THROUGH” of “L2 OUT” of the preamplifier
( 35).
How to reset to factory default?
1. After setting the volume higher than the minimum
level, press ON/STANDBY while holding down
MODE on the preamplifier.
2. CLEAR” appears on the display, then the
preamplifier will automatically go Standby.
Do not operate the preamplifier while “CLEAR” is
displayed.
Note that resetting the preamplifier will delete your
custom settings.
Power
Can’t turn on the Preamplifier.
The Preamplifier turns off unexpectedly.
Audio
There’s no sound.
The sound quality is not good.
Headphone output is intermittent or
there’s no sound.
Audio performance
The volume adjustment of LINE 2 does
not work
36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo P-3000R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo P-3000R in de taal/talen: Engels als bijlage per email.

De handleiding is 1,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Onkyo P-3000R

Onkyo P-3000R Gebruiksaanwijzing - Nederlands - 76 pagina's

Onkyo P-3000R Gebruiksaanwijzing - Deutsch - 76 pagina's

Onkyo P-3000R Gebruiksaanwijzing - Français - 76 pagina's

Onkyo P-3000R Gebruiksaanwijzing - Italiano - 76 pagina's

Onkyo P-3000R Gebruiksaanwijzing - Espanõl - 76 pagina's

Onkyo P-3000R Gebruiksaanwijzing - Svenska - 76 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info