68699
76
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
76
Troubleshooting—Continued
Noise or skip occurs during playback / Disc is not recognized and “NO DISC” is displayed / First track
is not played / Music scan takes longer time than usual / Playback starts from halfway / Some parts
cannot be played / Playback stops halfway / Display error occurs
The audio CD has a copy protection function (copy control function). Some audio CDs use copy protection that
doesn't conform to the official CD standard. Since these are nonstandard discs, they may not play properly in the CD/
HDD receiver.
Reception is noisy, stereo FM reception suffers from hiss, the Auto Preset function doesn’t preset all
stations, or the FM STEREO indicator doesn’t light up when tuned to a stereo FM station.
Check the antenna connections (see page 17).
Change the position of the antenna (see page 32).
Move the CD/HDD receiver away from a nearby TV or computer.
Move power cords and speaker cables as far away as possible from the tuner’s antenna.
Cars or airplanes can cause noisy interference.
The radio signal will be weakened if it has to pass through a concrete wall before reaching the antenna.
Try setting FM mode to mono (see page 36).
When listening to an AM station, noise may be heard when you operate the remote controller.
If none of the above improves the reception, install an outdoor antenna (see page 18).
If a power outage occurs or the power cable is disconnected:
If the preset stations are lost, preset them again (see page 34).
The clock and timer settings will be lost. Set the clock and timers again (see page 62).
Can’t adjust the frequency of the radio.
Use the Fast Reverse and Fast Forward [5]/[4] buttons to change the frequency of the radio (see page 32).
RDS doesn’t work.
The FM station you are tuned to doesn’t support RDS.
Install an outdoor FM antenna (see page 18).
Change the position or direction of your outdoor FM antenna (see page 18).
Move the FM antenna as far away as possible from fluorescent lights (see page 32).
Can’t record to components connected to LINE 2 or LINE3.
The CD/HDD receiver does not output signals from LINE 2 IN from LINE 2 OUT. In the same way, signals from
LINE 3 IN are not output from LINE 3 OUT. This protects the CD/HDD receiver from malfunction or failure due to
the loop between input and output.
If Audyssey EQ™ is active, you cannot perform recording to an external component. Deactivate Audyssey EQ™
(see page 26).
Interactive control with other Onkyo u-capable components is not working.
Make sure the u cables and analog audio cables are connected correctly (see page 19). Connecting only an u
cable won’t work.
Make sure the Input Display matches the type of device that you’ve connected to the CD/HDD receiver (see page 45).
No sound is heard from your turntable.
Make sure the turntable has a built-in phono equalizer.
If the turntable doesn’t have a phono equalizer built-in, you must provide one.
Record player cannot play.
When a record player of MC cartridge type is used, a boosting transformer or head amplifier is required.
Playback of audio CD with copy protection function (copy control function)
Tuner
External Components
76

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo CS-925 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo CS-925 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Onkyo CS-925

Onkyo CS-925 Gebruiksaanwijzing - Nederlands, Deutsch, Italiano, Svenska - 322 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info