492677
35
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
35
Custom Setup
The common setting for each input selector is explained
below. Go through the following steps for setup.
Tip:
You can also use the [MENU/ENTER] jog dial on the
CD receiver.
Preferences
ASb (Auto Standby)
When “Auto Standby” is set to “On”, the CD receiver
will automatically enter standby mode if there is no
operation for 30 minutes with no audio signal input.
The ASb indicator lights up when the Auto Standby
function is enabled.
Default setting: On (European models), Off (Other
models)
Update
These settings allow you to update the CD receiver’s
firmware. Do not shutdown the power of the CD receiver
while updating.
Note:
Refer to “Firmware Update” for update procedure (see
page 37).
SleepCharge
You can specify how the power is fed to your USB
device (mobile device) when the CD receiver is in
standby mode.
Note:
When the “SleepCharge” setting is set to “On”, the
power consumption slightly increases in standby
mode.
If the iPod/iPhone completely runs out of battery,
charging might not work. In that case you need to turn
the power on again.
If you disconnect the USB device while
“ReadyCharging” appears, the CD receiver does not
enter the standby mode. Press the On/Standby [8]
button to enter the standby mode again.
Only the USB port (front) can be used for charging.
Sel Change
When you connect an Onkyo u-capable component,
it’s important that you select the input source name that
matches the type of component for u to work properly.
Before operating this setting, you need to select the input
source that you want to set.
LINE1, LINE2, OPTICAL, COAXIAL
DOCK
Note:
“DOCK” can be selected for the “LINE1”, “LINE2”,
“OPTICAL”, “COAXIAL” input selector, but not at
the same time.
M.OPT (Music Optimizer)
The Music Optimizer function enhances the sound
quality of compressed music files. When set to “On”, the
M.OPT indicator lights on the CD receiver’s display.
Note:
This setting can be used only for the NET and USB
input selectors.
The Music Optimizer function only works with digital
audio input signals with a sampling rate below
48 kHz.
Setting Common Preferences
1
Press the [MENU] button, and then use the
Arrow [!]/["] buttons to select the
preference you want to change.
2
Press [ENTER].
3
Use the Arrow [#]/[$] buttons to select the
preference’s options.
4
Press [ENTER].
On
Off
Version
Displays the current version of the firmware.
Update Notice
Enable (default)
Disable
When this setting is enabled, you will be notified if a
firmware update via network is available.
CR via NET: Performs the firmware update via
Internet. Check the network
connection before updating.
CR via USB: Performs the firmware update from a
USB flash drive.
On:
(default)
If you connect USB device (mobile
device), charging will start.
“Charging” appears on the display.
Off: Your USB device (mobile device)
is not charged.
On
Off (default)
35

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo CR-N755 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo CR-N755 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Onkyo CR-N755

Onkyo CR-N755 Gebruiksaanwijzing - Nederlands - 96 pagina's

Onkyo CR-N755 Gebruiksaanwijzing - Deutsch - 96 pagina's

Onkyo CR-N755 Gebruiksaanwijzing - Français - 96 pagina's

Onkyo CR-N755 Gebruiksaanwijzing - Italiano - 96 pagina's

Onkyo CR-N755 Gebruiksaanwijzing - Espanõl - 96 pagina's

Onkyo CR-N755 Gebruiksaanwijzing - Svenska - 96 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info