REASSIGNING THE DEVICE KEYS
The Topline 8 can operate any combination of eight devices you want (for
example: 2-TVs, 2-VCRs, 1-Satellite, 1-Amplifier, 1-Tuner and 1-CD Player). To
do this, you must reassign the necessary keys.
For example, to place a second TV on the AUX2 key:
Press and hold the MAGIC key until display screen
changes from [DEVICE and the TIME] to [TIMED SEQ].
Press MENU- twice, the display will change to
[CONFIGURE]. Press ENTER and the display will change to
[THEATR SEL].
Press MENU- three times and the display will read [DEV
CHANGE]. Press ENTER.
The display will read [FROM DEV]. Press the DEVICE KEY
you would like to move. In this example, you would press
TV. The display will read [COPY TO]. Then press the
unused DEVICE KEY you would like to replace. In this
example, you would press AUX2. The display will change
to [TV2 and TIME]. Now your second TV can be
programmed under the AUX2 key.
Continue with setting up this device with the appropriate
3-Digit Code as was described in steps 1-7 on page 11.
To reset a device key back to its orginal function repeat the steps above only
press the same device key twice during step 4.
15
Basic Functions
Notes:
- To reassign any device key, follow the instructions above only substitute
the correct device keys during step 4.
- If you have moved a device key which contains more than one type of
device (ie: SAT key contains Satellite and Cable), you will need to refer to
the chart on page 11 during step 4.
1
2
4
5
3
