5
To Set Up Your DSS or Satellite Receiver
:
NOTE: If the four-digit code for your device begins with a “0”, only
the last three numbers of your code will be displayed.
1 Turn on your DSS or Satellite Receiver.
2 Press and release the CBL/SAT key.
3 Press and hold SETUP until the display screen changes
from [CABLE and the TIME] to [TIMED SEQ].
4 Press the MENU – key. The display screen will change
to [CODE SET UP]. Press SEL. The display will
change to [DEV SET UP].
5 Press SEL and the display screen will change to
[CABLE].
6 Press the MENU – key. The display screen will change
to [SAT].
7 Enter the first Satellite code listed for your brand in the
“Set Up Codes for Satellites” , then press SEL. Point
the remote control at the Satellite and press POWER.
Your Satellite should turn OFF. If your Satellite turns
OFF, press the ESC key to return the display to [SAT
and the TIME]. If your Satellite does not turn OFF,
enter the next code in the code list then press SEL
followed by POWER again. Once the correct code is
entered, press the ESC key to return the display to
[SAT and the TIME].
For a detailed explanation of what function each key will perform in
the Satellite mode, please refer to “Key Index”.
Set Up Codes for DSS and Satellite Receivers
AlphaStar 0772
Astro Industries0095
BSR 0095
Capetronic 0095
Channel Master 0018, 0212
Chaparral 0053, 0209, 0216
DX Antenn 0041
Drake 0018, 0064, 0149, 0245
Echosta 0775, 0148, 0159, 0269, 0280
Expressvu 0775
General Instrument 0627, 0361, 0869
HTS 0775
Hitachi 0819
Homecable 0238
Hughes Network Sys. 0749
Hytek 0095
IQ 0210
IQ Prism 0210
JVC 0775
Janeil 0152
Jerrold 0627, 0361
Legend 0269
Macom 0018
Magnavox 0724, 0722
Memorex 0724, 0269
Next Level 0869
Panasonic 0701, 0152
Philips 0724, 0722, 0200
President 0074
Primestar 0627, 0361
Proscan 0566
RCA 0566, 0143, 0392, 0855
Radio Shack 0566, 0869
Realistic 0052
STS 0041, 0210
Sony 0639
Star Choice 0869
Star Trak 0180
Toshiba 0790, 0082
Uniden 0724, 0722, 0052, 0074, 0076, 0238, 0370
Zenith 0064, 0245, 0856
To Set Up Your DVD or LD Player:
NOTE: If the four-digit code for your device begins with a “0”, only
the last three numbers of your code will be displayed.
1 Turn on your DVD or LD Player and insert a disc.
2 Press and release the DVD/LD key.
3 Press and hold SETUP until the display screen changes
from [DVD and the TIME] to [TIMED SEQ].
4 Press the MENU – key one time. The display screen
will change to [CODE SET UP]. Press SEL. The
display will change to [DEV SET UP].
5 Press SEL and the display screen will change to
[DVD].
NOTE: If you are setting up a LD Player, press either MENU + or
MENU –. The display will change to [LDP].
6 Enter the first DVD or LD code listed for your brand in the
“Set Up Codes for DVD Players” or “Set Up Codes for LD
Players”, then press SEL. Aim the remote control at the
DVD or LD player and press POWER or PLAY.Your
player should turn OFF or start to play your disc. Press
the ESC key to return the display to [DVD and the TIME].
If your player does not turn OFF or start to play your disc,
enter the next code in the code list then press SEL
followed by POWER or PLAY again. Once the correct
code is entered, press the ESC key to return the display
to [DVD and the TIME].
For a detailed explanation of what function each key will perform in
the DVD mode, please refer to the “Key Index”.
Set Up Codes for DVD Players
Harman/Kardon 0582
JVC 0558
Kenwood 0534
Magnavox 0503
Magnavox CD-R 0626
Mitsubishi 0521
Onkyo 503
Optimus 0525
Panasonic 0490
Philips 0503, 0539
Pioneer 0525, 0571
Proscan 0522
RCA 0522
Samsung 0573
Sony 0533
Technics 0490
Theta Digital 0571
Toshiba 0503
Yamaha 0490, 0545
Zenith 0503, 0591
Set Up Codes for LD Players
Aiwa 0203
Carver 0064, 0194, 0323
Denon 0059, 0172
Disco Vision 0023
Funai 0203
Harman/Kardon 0194
Hitachi 0023
Magnavox 0194, 0217
Marantz 0064, 0194
Mitsubishi 0059
NAD 0059
Panasonic 0204
Philips 0064, 0194
Pioneer 0059, 0023
Quasar 0204
Realistic 0203
Samsung 0323
Sega 0023
Sony 0193, 0201
Technics 0204
Theta Digital 0194
Yamaha 0217
To Set Up Your CD or MD Player:
NOTE: If the four-digit code for your device begins with a “0”, only
the last three numbers of your code will be displayed.
1 Turn on your CD or MD Player and insert a disc.
2 Press and release the CD key.
3 Press and hold SETUP until the display screen changes
from [CD and the TIME] to [TIMED SEQ].
4 Press the MENU – key one time. The display screen
will change to [CODE SETUP]. Press SEL. The dis
play will change to [DEV SET UP].
5 Press SEL and the display screen will change to [CD].
6 Enter the first CD code listed for your brand in the “Set
Up Codes for CD or MD Players”, then press SEL.
7 Aim the remote control at the CD or MD player and press
POWER or PLAY.Your player should turn OFF
or start to play your disc. Press the ESC key to return the
display to [CD and the TIME]. If your player does not turn
OFF or start to play your disc, enter the next code in the
code list then press SEL followed by POWER or PLAY
again. Once the correct code is entered, press the ESC
key to return the display to [CD and the TIME].
or
or
