ADDING NEW CODES (continued)
4. Tap on the first code in the list (e.g.,TV 1),aim Mosaic at the desired device (e.g., televi-
sion), and tap on the
PWR key. The device should turn on. If it does not respond, tap on
the next code in the list (e.g.,
TV 2), then tap on the PWR key again.If the device still
does not respond,repeat this process by testing each code until you find one that works.
NOTE: Depending on your download, the code list may include more than one device type.
5. To save a code that works, tap on the OK key.You will see the UPGRADE
ADD/REPLACE menu
that lists two choices.
• Use the
ADD key when setting up a new device (e.g., a DVD player) that is not
currently on the
Device Selection Strip (if needed, refer to Using the Touch
Screen – Selecting a Device
on page 18). The remaining instructions assume
you will be adding a new device.
• Use the
REPLACE key is used when replacing a device (e.g., a new TV set) that
is currently on the
Device Selection Strip.
6. Tap on the
ADD key to add the device to Mosaic’s memory.You will see the default
device label being added to the
Device Selection Strip.
NOTE: If you tap on the REPLACE key instead, Mosaic will ask you to select the device to be
replaced and, after your selection, if you want to relabel it. However, if the device to be
replaced has programmed keys, Mosaic will first ask if you want to keep or clear the settings.
36 Chapter 3: Setting Up Mosaic
MOSAIC
