504926

Omron M6 - HEM-7001-E Handleiding

20
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
Digital Automatic Blood Pressure Monitor
Model M6
• Instruction Manual
• Mode d’emploi
• Gebrauchsanweisung
• Manuale de instructone
• Manual de instrucciones
• Gebruiksaanwijzing
• РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
EN
FR
DE
IT
ES
NL
RU
IM-HEM-7001-E-02-08/08
1638166-1C
HEM-7001-E_main.book Page 1 Thursday, October 9, 2008 8:31 AM
2
Contents
Introduction ..............................................................................3
Important Safety Information..................................................4
1. Overview ..............................................................................5
2. How to Obtain Meaningful Readings.................................7
3. Preparation..........................................................................8
3.1 Installing/Replacing the Batteries.....................................8
3.2 Setting the Date and Time ...............................................9
4. Using the Monitor..............................................................11
4.1 Applying the Arm Cuff....................................................11
4.2 Taking a Reading...........................................................14
4.3 Using the Memory Function ...........................................18
5. Handling Errors and Problems ........................................20
6. Optional Parts....................................................................21
7. Storage and Maintenance.................................................22
8. Technical Data...................................................................23
9. Some Useful Information about Blood Pressure ...........25
HEM-7001-E_main.book Page 2 Thursday, October 9, 2008 8:31 AM
3
EN
Introduction
The OMRON M6 is a compact, fully automatic blood pressure
monitor, operating on the oscillometric principle. It measures
your blood pressure and pulse rate simply and quickly. For
comfortable controlled inflation without the need of pressure
pre-setting or re-inflation the devices uses its advanced “Intelli-
Sense” technology.
The device also stores up to 90 measurements in memory and
calculates an average value based on the last three measure-
ments. Each measurement is stored along with the date and
time of measurement.
HEM-7001-E_main.book Page 3 Thursday, October 9, 2008 8:31 AM
4
Important Safety Information
• Blood pressure measurement is not suitable in cases of seri-
ous arteriosclerosis (hardening of the arteries).
• The pulse display is not suitable for monitoring the frequency
of cardiac pacemakers.
• Pregnant women should only measure their own blood pres-
sure in consultation with their doctor, since the readings can
be changed by pregnancy.
• Do not use the monitor on babies, young children or persons
who cannot express their consent.
• Do not use the monitor for any purpose other than measuring
blood pressure.
• Do not use a cellular phone near the monitor. This may result
in the monitor operating incorrectly.
• The battery liquid may leak and damage the monitor. Please
observe the following points.
- When you are not going to use the unit for a long period of time
(approximately three months or more), take out the batteries.
- Replace old batteries with new ones immediately.
- Do not use old and new batteries together.
- Do not insert the batteries with their polarities incorrectly aligned.
• Please remember: Self-measurement is not the same as
medical treatment.
• You should never change the dose of medicines prescribed by
your doctor but you can help your doctor to optimize the treat-
ment by documenting the measured values. If there are unu-
sual values, please inform your doctor immediately.
• Never unplug the power cord with wet hands.
• Use only the original AC adapter designed for this unit. Use of
unsupported adapters may damage the device.
HEM-7001-E_main.book Page 4 Thursday, October 9, 2008 8:31 AM
5
1.Overview
EN
1. Overview
Monitor
A. Display
B. O/I START button
C. Memory ( ) buttons
D. Date/Time ( ) setting
button
E. Battery compartment
F. Air jack
G. AC adapter jack (for optional
AC adapter)
B
D
A
C
E
G
F
HEM-7001-E_main.book Page 5 Thursday, October 9, 2008 8:31 AM
6
1.Overview
Display
Package contents
H. Systolic blood pressure
I. Diastolic blood pressure
J. Memory display
K. Average value display
L. Movement error display
M. Irregular heartbeat display
N. Battery low display
O. Heartbeat display
P. Pulse display
Q. Deflation display
R. Date/Time display
S. Arm cuff (Medium cuff: arm
circumference 22-32 cm)
T. Air plug
U. Air tube
V. Storage case
W. Four “AA” alkaline (LR6)
batteries
H
O
Q
I
K
M
L
J
P
R
N
S
W
UT
V
HEM-7001-E_main.book Page 6 Thursday, October 9, 2008 8:31 AM
7
2.How to Obtain Meaningful Readings
EN
2. How to Obtain Meaningful Readings
To help ensure a reliable reading, avoid eating, smoking, or
exercising for at least 30 minutes before taking a measure-
ment.
Note: Remove any tight-fitting clothing from your upper arm.
1. Sit on a chair with your feet flat on the floor and place your arm
on a table so that the arm cuff will be at the same level as your
heart.
2. Apply the arm cuff to your upper arm. The coloured marker
should be centred on the inside of your arm and point down the
inside of the arm, so that the air tube runs down the inside of
your forearm and is in line with your middle finger.
3. Secure the cuff around your arm using the fabric fastener strip.
4. Press the O/I START button.
When measurement is complete,
the monitor displays your blood
pressure and pulse rate, and auto-
matically deflates the cuff.
Notes:
• Always wait at least 2-3 minutes before taking another blood
pressure measurement.
• Please note that all measurement are stored in the memory. If
different people measure with the same device make sure
that you are aware of this fact.
HEM-7001-E_main.book Page 7 Thursday, October 9, 2008 8:31 AM
8
3.Preparation
3. Preparation
3.1 Installing/Replacing the Batteries
1. Remove the battery cover.
2. Insert four “AA” batteries as indi-
cated in the battery compartment
and then replace the battery cover.
Notes:
• If the battery low display ( ) appears on the display, replace
all four batteries at the same time. Long-life alkaline batteries
are recommended.
• Remove the batteries if the monitor will not be used for three
months or more.
• If the batteries are removed for a long period of time, the
Date/Time setting will need to be reset. See “Setting the Data
and Time” for details.
• Dispose of batteries according to applicable local regulations.
HEM-7001-E_main.book Page 8 Thursday, October 9, 2008 8:31 AM
9
3.Preparation
EN
3.2 Setting the Date and Time
Your blood pressure monitor automatically stores up to 90
measurements values in its memory and calculates an average
reading based on the measurements from the last three read-
ings.
• Set the monitor to the correct date and time before taking a
measurement for the first time.
• If the batteries have been removed for a long period of time,
the date and time setting will need to be reset.
1. When the batteries are installed, the
year digits will flash in the display
when you turn on the monitor.
Note: If you need to reset the date
and time for some reason,
hold down the button while the power is off.
2. Press the button to advance
the digits one at a time.
To change the digits to a lower
number, press the button to
lower the digits one at a time.
If you hold down the or
button, the digits will advance (or
lower) rapidly.
3. Press the button to confirm the
setting when the desired number
appears on the display.
HEM-7001-E_main.book Page 9 Thursday, October 9, 2008 8:31 AM
10
3.Preparation
4. Repeat steps 2 and 3 to set the month and date (day).
5. Repeat steps 2 and 3 to set the hour and minutes for the time.
6. Press the O/I START button when
you have finished setting the date
and time.
or
or
or
or
HEM-7001-E_main.book Page 10 Thursday, October 9, 2008 8:31 AM
11
4.Using the Monitor
EN
4. Using the Monitor
4.1 Applying the Arm Cuff
You can wrap the cuff either on your right or left arm.
• Remove tight-fitting clothing from
your upper arm.
• Do not place the cuff over thick
clothes and do not roll up your
sleeve if it is too tight.
1. If the cuff is assembled correctly, the
hook material will be on the outside of
the cuff loop and the metal D-ring will
not touch your skin.
Note: If the cuff is not assembled,
pass the end of the cuff fur-
thest from the tubing through
the metal D-ring to form a loop. The smooth cloth should
be on the inside of the cuff loop.
2. Insert the air plug into the air jack (on the left side of the
device).
The cuff must be fully deflated when it is inserted into the air
jack.
Pile side material
Sewn hook material
D-ring
Air plug
Air jack
HEM-7001-E_main.book Page 11 Thursday, October 9, 2008 8:31 AM
12
4.Using the Monitor
3. Sit in a chair with your feet flat on the floor and place your arm
on a table so that the cuff will be at the same level as your
heart.
4. Put your arm through the cuff loop.
The bottom of the cuff should be approximately 1 to 2 cm
above the elbow.
Apply the cuff to your upper arm so that the coloured marker is
centred on the middle of your inner arm and points down the
inside of the arm. The air tube should run down the inside of
your forearm and be in line with your middle finger.
Bottom Edge 1 to 2 cm
Air tube
Marker
HEM-7001-E_main.book Page 12 Thursday, October 9, 2008 8:31 AM
13
4.Using the Monitor
EN
5. Pull the cuff so that the top and bot-
tom edges are tightened evenly
around your arm.
6. When the cuff is positioned correctly,
close the fabric fastener FIRMLY.
Notes:
• Make certain the cuff fits snugly around your arm.
• The cuff should make good contact with your skin. You should
be able to fit your index finger between the cuff and your arm
easily, so you can pull the cuff off and on.
• Make sure that there are no kinks in the air tubing.
Taking measurements on the right arm
Please note the following points
when applying the cuff to your right
arm. Apply the cuff so that the air
tube is at the side of your elbow.
Notes:
• Be careful not to rest your arm on the air tube, or otherwise
restrict the flow of air to the cuff.
• Apply the arm cuff so that no part of the cuff is positioned over
the elbow joint. The cuff should be 1 to 2 cm above the elbow.
HEM-7001-E_main.book Page 13 Thursday, October 9, 2008 8:31 AM
14
4.Using the Monitor
4.2 Taking a Reading
1. Press the O/I START button and remain still, the cuff will start
to inflate automatically.
As the cuff begins to inflate, the monitor automatically deter-
mines your ideal inflation level. Remain still and do not talk until
measurement is completed.
Note: Do not inflate the cuff if it is not wrapped around your
arm.
2. Inflation stops automatically
and measurement is started.
As the cuff slowly deflates,
decreasing numbers appear
on the display and the Heart-
beat display flashes at every heartbeat.
In rare circumstances, the monitor might re-inflate the cuff to
continue with the measurement.
3. When the measurement is complete, the arm
cuff completely deflates and your blood pres-
sure and pulse rate are displayed.
Note: The monitor automatically stores the
blood pressure readings and pulse rate
along with date and time of measurement in its memory.
HEM-7001-E_main.book Page 14 Thursday, October 9, 2008 8:31 AM
15
4.Using the Monitor
EN
4. Press the O/I START button to turn
the monitor off.
Note: If you forget to turn the moni-
tor off, it will automatically
shut itself off after five minutes.
Important:
• Wait 2-3 minutes before taking another blood pressure meas-
urement. Waiting between readings allows the arteries to
return to the condition prior to taking the blood pressure
measurement.
• If you move during measurement, the movement display
( ) may appear. Repeat the measurement and remain still
until the measurement is complete.
• Your blood pressure monitor includes an irregular heartbeat
feature. Irregular heartbeats can influence the results of the
measurement. The irregular heartbeat algorithm automati-
cally determines if the measurement is usable or needs to be
repeated. If the irregular heartbeat display ( ) is shown
after your have taken a measurement, repeat the measure-
ment. If the irregular heartbeat display ( ) is shown fre-
quently, please make your doctor aware of it.
Instructions for special conditions
If your systolic pressure is known to
be more than 220 mmHg, after the
cuff starts to inflate, press and hold
the O/I START button until the moni-
tor inflates 30 to 40 mmHg higher
than your suspected systolic pressure.
Important:
• The monitor will not inflate above 300 mmHg.
• Do not apply more pressure than necessary.
HEM-7001-E_main.book Page 15 Thursday, October 9, 2008 8:31 AM
16
4.Using the Monitor
What is Irregular Heartbeat?
An irregular heartbeat is a
heartbeat rhythm that varies
by more than 25% from the
average heartbeat rhythm
detected while the unit is
measuring the systolic and
diastolic blood pressure.
If such an irregular rhythm is
detected more than twice dur-
ing measurement, the irregular heartbeat display ( )
appears on the display when the measurement results are dis-
played. If too many irregular rhythms are detected during
measurement, the irregular heartbeat display appears ( )
but no measurement is displayed.
What is Arrhythmia?
A heartbeat is stimulated by electrical signals that cause the
heart to contract.
Arrhythmia is a condition where the heartbeat rhythm is abnor-
mal due to flaws in the bio-electrical system that drives the
heartbeat. Typical symptoms are skipped heartbeats, prema-
ture contraction, an abnormally rapid (tachycardia) or slow
(bradycardia) pulse. This can be caused by heart disease,
aging, physical predisposition, stress, lack of sleep, fatigue etc.
Arrhythmia can only be diagnosed by a doctor through a spe-
cial examination.
Whether the appearance of irregular heartbeat display ( ) in
the results indicates arrhythmia or not can only be determined
by an examination and diagnosis by your doctor.
If the irregular heartbeat display ( ) is shown frequently,
please make your doctor aware of it. Conducting self-diagnosis
and treatment based on measurement results is dangerous. Be
sure to follow the instructions of your doctor.
N
orma
l
H
eart
b
eat
Irregular Heartbeat
Pulse
Blood pressure
Blood pressure
Short
Long
Pulse
HEM-7001-E_main.book Page 16 Thursday, October 9, 2008 8:31 AM
17
4.Using the Monitor
EN
4.3 Using the Memory Function
This monitor has a memory capable of storing 90 sets of read-
ings. Every time you complete the measurement, the monitor
automatically stores blood pressure and pulse rate. The moni-
tor also calculates an average reading based on the measure-
ments from the last three readings.
Note: To ensure that the measurement results are recorded
correctly, make sure that the date and time are set cor-
rectly before taking a measurement.
When 90 sets of readings are stored in memory, the old-
est set will be deleted to store a new set.
The date and time of stored readings will be alternately
displayed.
To View the Average Value
Press the memory button.
The average values, based on the last three measurements, is
displayed.
HEM-7001-E_main.book Page 17 Thursday, October 9, 2008 8:31 AM
18
4.Using the Monitor
To View Previous Readings Stored in Memory
1. Press the button, while the average reading is displayed,
to view reading stored in memory from the most recent to the
oldest.
2. Press the or button repeatedly to cycle through the
previous measurement values
( button: from the most recent to the oldest,
button: from the oldest to the most recent)
Keep the button pressed down to cycle rapidly through the pre-
vious values.
To Delete All the Values Stored in Memory
Caution!
You cannot delete the stored readings partially, all the reading
in the monitor will be deleted.
To delete stored readings, press the memory button and
the O/I START button simultaneously, then all the readings will
be deleted.
Alternatin
g
displa
y
HEM-7001-E_main.book Page 18 Thursday, October 9, 2008 8:31 AM
19
5.Handling Errors and Problems
EN
5. Handling Errors and Problems
Error Display Cause Remedy
Cuff is under inflated.
Carefully read and repeat the
steps listed under “Taking a Read-
ing” on p. 14.
Movement during meas-
urement
Cuff over inflated.
This icon indicates irreg-
ular or weak pulses are
detected, but result can
be considered reliable.
Remove the arm cuff. Wait 2-3
minutes and then take another
measurement.
Repeat the steps in “Taking a
Reading” on p. 14. If this error
continues to appear, contact your
physician.
Batteries have run down.
Replace all four “AA” batteries
with new ones.
HEM-7001-E_main.book Page 19 Thursday, October 9, 2008 8:31 AM
20
6.Optional Parts
6. Optional Parts
Problem Cause Remedy
No display appears
when the O/I START
button is pressed.
The batteries are empty. Replace the batteries.
Cannot measure or
readings are too high.
Is the cuff wrapped
firmly around the arm?
Attach the arm cuff cor-
rectly.
The cuff pressure does
not rise although the
pump motor can be
heard.
Check that the air plug
is properly connected to
the monitor. Push the air
plug firmly into the air
jack.
The blood pressure is
different each time. The
reading is extremely low
(or high).
Blood pressure readings constantly vary with time
of measurement and nervous condition. Take deep
breaths to relax before taking a measurement.
AC Adapter (Q-adapter
or F-adapter)
Small cuff
Arm circumference 17 -
22 cm
Large cuff
Arm circumference 32 -
42 cm
HEM-7001-E_main.book Page 20 Thursday, October 9, 2008 8:31 AM
21
7.Storage and Maintenance
EN
7. Storage and Maintenance
To protect your monitor from damage, please observe the
following:
• Do not subject your monitor and cuff to extreme temperatures,
humidity, moisture or direct sunlight.
• Do not fold the cuff or tubing tightly.
• Do not disassemble the monitor.
• Do not carry out repairs of any kind yourself. If a defect occurs,
consult the OMRON distributor or Customer Services as men-
tioned on the packaging, or seek the advice of your surgical
appliance stockist or pharmacist.
• The OMRON M6 is a precision measuring device. It is important
that the accuracy remains within the specifications. It is recom-
mended that you have the monitor inspected every two years to
ensure it is accurate and functioning correctly. Consult the
OMRON distributor or Customer Services as mentioned on the
packaging for further details.
• Do not subject the monitor to strong shocks or vibrations (for
example, dropping the monitor on the floor.)
• Do not use volatile liquids to clean the monitor. THE MONITOR
SHOULD BE CLEANED WITH A SOFT, DRY CLOTH.
• Do not wash the arm cuff or immerse it in water.
Storage
Keep the monitor in its storage case when
not in use.
Note: If you are using the optional AC
adapter, make sure that the adapter
is placed under the cuff and monitor
so that it does not damage the display.
HEM-7001-E_main.book Page 21 Thursday, October 9, 2008 8:31 AM
22
8.Technical Data
8. Technical Data
Note: Subject to technical modification without prior notice
• This OMRON product is produced under the strict quality system of OMRON Health-
care Co. Ltd., Japan. The Core component for OMRON blood pressure monitors,
which is the Pressure Sensor, is produced in Japan for assembly.
• Disposal of this product and used batteries should be carried out in accord-
ance with the national regulations for the disposal of electronic products.
This device fulfils the previsions of EC directive 93/42/EEC (Medical Device
Directive). This blood pressure monitor is designed according to the European Stand-
ard EN1060, Non-invasive sphygmomanometers Part 1: General Requirements and
Part 3: Supplementary requirements for electromechanical blood pressure measuring
systems.
Caution: Please read the instruction manual carefully
before using the device.
Model OMRON M6 (HEM-7001-E)
Display LCD Digital Display
Measurement Method Oscillometric method
Measurement Range
Pressure: 0 mmHg to 299 mmHg
Pulse: 40 to 180/min.
Accuracy
Pressure: ±3 mmHg
Pulse: ± 5% of display reading
Inflation Fuzzy-logic controlled by electric pump
Deflation Automatic pressure release valve
Memory 90 Measurements with date and time
Power Source
4 “AA” batteries 1.5V or AC/ DC adapter
(optional, 6V = 4W)
Battery life Capacity of new alkaline batteries is approx. 1500 measurements
Operating temperature/
Humidity
+10°C to +40°C
Maximum: 30 to 90% RH
Storage temperature
Humidity
-20°C to +60°C
Maximum: 10 to 95% RH
Console Weight Approximately 355g without batteries
Cuff Weight Approximately 135g
Outer Dimensions Approximately 131 (l) mm × 155 (w) mm × 84(h) mm
Cuff Dimensions
Approximately 140 mm × 480 mm
(Medium cuff: arm circumference 22 to 32 cm)
Package Content
Medium cuff, instruction manual, storage case, battery set, guar-
antee card, blood pressure pass
= Type B
HEM-7001-E_main.book Page 22 Thursday, October 9, 2008 8:31 AM
23
8.Technical Data
EN
Important information regarding Electro Magnetic Compatibility (EMC)
With the increased number of electronic devices such as PC’s and mobile (cellular)
telephones, medical devices in use may be susceptible to electromagnetic
interference from other devices. Electromagnetic interference may result in
incorrect operation of the medical device and create a potentially unsafe situation.
Medical devices should also not interfere with other devices.
In order to regulate the requirements for EMC (Electro Magnetic Compatibility) with
the aim to prevent unsafe product situations, the EN60601-1-2 standard has been
implemented. This standard defines the levels of immunity to electromagnetic
interferences as well as maximum levels of electromagnetic emissions for medical
devices.
This medical device manufactured by OMRON Healthcare conforms to this
EN60601-1-2:2001 standard for both immunity and emissions.
Nevertheless, special precautions need to be observed:
• Do not use mobile (cellular) telephones and other devices, which generate strong
electrical or electromagnetic fields, near the medical device. This may result in
incorrect operation of the unit and create a potentially unsafe situation. Recom-
mendation is to keep a minimum distance of 7 m. Verify correct operation of the
device in case the distance is shorter.
Further documentation in accordance with EN60601-1-2:2001 is available at
OMRON Healthcare Europe at the address mentioned in this instruction manual.
Documentation is also available at www.omron-healthcare.com.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that it should not be
disposed of, with other household wastes at the end of its working life. To prevent
possible harm to the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle it responsibly
to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they can take
this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of
the purchase contract. This product should not be mixed with other commercial
wastes for disposal.
This product does not contain any hazardous substances.
HEM-7001-E_main.book Page 23 Thursday, October 9, 2008 8:31 AM
24
9.Some Useful Information about Blood Pressure
9. Some Useful Information about Blood Pressure
What is Blood Pressure?
Blood pressure is a measure of the force of blood flowing
against the walls of the arteries. Arterial blood pressure is con-
stantly changing during the course of the heart's cycle.
The highest pressure in the cycle is called the Systolic Blood
Pressure; the lowest is the Diastolic Blood Pressure.
Both pressure readings, the Systolic and Diastolic, are neces-
sary to enable a doctor to evaluate the status of a patient's
blood pressure.
Why is it a Good Thing to measure Blood Pressure at
Home?
Having your blood pressure measured by a doctor can cause
anxiety which is itself a cause of high blood pressure. As a vari-
ety of conditions affect blood pressure, a single measurement
may not be sufficient for an accurate diagnosis.
Many factors such as physical activity, anxiety, or the time of
day, can influence your blood pressure. Thus it is best to try
and measure your blood pressure at the same time each day,
to get an accurate indication of any changes in blood pressure.
Blood pressure is typically low in the morning and increases
from afternoon to evening. It is lower in the summer and higher
in the winter.
Blood pressure is measured in millimetres of mercury (mmHg)
and measurements are written with the systolic pressure
before the diastolic e.g. A blood pressure written as 140/90, is
referred to as 140 over 90 mmHg.
HEM-7001-E_main.book Page 24 Thursday, October 9, 2008 8:31 AM
25
9.Some Useful Information about Blood Pressure
EN
Classification of Blood Pressure by the World Heath
Organization
The World Health Organization (WHO) and the International
Society of Hypertension (ISH) developed the Blood Pressure
Classification shown in this figure.
This classification is based on the blood pressure values meas-
ured on people in a sitting position in outpatient departments of
hospitals.
*There is no universally accepted definition of hypotension.
However, those having the systolic pressure below 100 mmHg
are assumed as hypotensive.
Example: fluctuation within a day (male, 35 years old)
mmHg
200
150
100
50
61218 24
Upper curve: systolic blood pressure
Lower curve: diastolic blood pressure
Time of day
Optimal blood
pressure
(target value)
Normal blood
pressure
Normal systolic value
Mild hypertension
Moderate hypertension
Severe hypertension
Systolic blood pressure
(mmHg)
Diastolic
blood
pressure
(mmHg)
80
180
160
140
130
120
85 90 100 110
HEM-7001-E_main.book Page 25 Thursday, October 9, 2008 8:31 AM
26
9.Some Useful Information about Blood Pressure
Made in China
Manufacturer
OMRON HEALTHCARE CO., LTD.
24, Yamanouchi Yamanoshita-cho, Ukyo-ku, Kyoto,
615-0084, Japan
EU-representative
OMRON HEALTHCARE EUROPE B.V.
Kruisweg 577, 2132 NA Hoofddorp,
The Netherlands
www.omron-healthcare.com
Production
facility
OMRON DALIAN CO., LTD.
Economic & Technical Development Zone
Dalian 116600, China
Subsidiary
OMRON HEALTHCARE UK LTD.
Opal Drive
Fox Milne, Milton Keynes MK15 0DG, United Kingdom
OMRON Medizintechnik Handelsgesellschaft mbH
John-Deere-Str. 81a, 68163 Mannheim, Germany
www.omron-medizintechnik.de
OMRON SANTÉ FRANCE SAS
14, rue de Lisbonne, 93561 Rosny-sous-Bois Cedex, France
EC REP
HEM-7001-E_main.book Page 26 Thursday, October 9, 2008 8:31 AM
… 20 …

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Omron-M6---HEM-7001-E

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Omron M6 - HEM-7001-E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Omron M6 - HEM-7001-E in de taal/talen: Engels als bijlage per email.

De handleiding is 1,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Omron M6 - HEM-7001-E

Omron M6 - HEM-7001-E Gebruiksaanwijzing - Nederlands - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info