549548
17
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
17
Note:
Note: It is recommended that the cuff be applied as tightly as acceptable for the
patient. A too loose cuff will cause much longer blood pressure measurement
times and possibly aborted measurements. With an overly loose cuff, the
monitor must pump to tighten the cuff on the arm and then it must reach the
pressure necessary for measurement. This causes considerable inconvenience
for the patient and results in less data for evaluation. If the patient removes
the cuff for a period during the monitoring session, it should be re-applied
with appropriate tightness, with help from another person, if necessary. Should
blood pressure measurements cause blood shots, torpidity or pain in the hand
after an individual measurement, the cuff should be removed from the arm and
disconnected from the monitor. Such occurrence should be reported to the
physician at once after the monitoring session.
OMRON M24/7 recognizes and functions with three different cuff sizes. Please
set the appropriate cuff size to be used during the programming of the device.
Attention: inappropriate setting of the cuff size may lead to device malfunctioning,
which is inconvenient for the patient and may lead to an unsuccessful measurement.
Name Bladder
dimensions
Sleeve
dimensions
Arm circumference
range*
Small cuff (child) 9 x 18 cm 11 x 32 cm under 24 cm
Normal cuff 12 x 25 cm 15 x 56 cm 24-32 cm
Large cuff 15 x 33 cm 17 x 77 cm 32-42 cm
* When properly applied, the end of the sleeve (the one closer to the tube) should
fall in the indicated range.
The cuff is the component which, by de¿ nition of the relevant standard, is
protected against a de¿ brillator discharge.
Caution!
Substitution of a cuff different from that supplied might result in measurement
error and/or in certain cases cause damage to the main monitor unit.
3. Care and Maintenance
3.1. Handling Errors and Problems
Below you can ¿ nd a list of potential error code displays, their meaning and a
description of the error code.
Unsuccessful measurements
E 1 aborted measurement the measurement timeout is over, the
measurement had to be aborted (the
patient was moving)
E 2 (Off) manually interrupted the measurement was stopped by pressing
a button (the display differs from others:
“OFF” on the LCD)
IM_EN.indd 17 19/07/2012 14:30:03
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Omron M24-7 ABPM bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Omron M24-7 ABPM in de taal/talen: Engels als bijlage per email.

De handleiding is 0,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info