549548
10
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
10
Switching the device off
Press and hold the START button for more than 10 seconds then release it when
two horizontal segments appear on the LCD, this way the OMRON M24/7 will be
switched off. If you do not release the button in 2 seconds after the two horizontal
segments appeared, the monitor will return to normal operation. This feature helps
to avoid unintended power-off. The device can only be switched on manually.
While the monitor is switched off normal functions are not available, even
prescheduled measurements will not be triggered. Therefore, only in case
of a valid reason should the device be switched off.
Switching the device on
The OMRON M24/7 is switched on to normal operation if the START button is
pressed and held for more than 3 seconds. If the device is switched off, no other
functions are available.
LCD check
Press and hold the START button 3 to 5 seconds to light up all segments of the
LCD to check if they all work correctly.
Battery voltage check
Press and hold the START button for more than 5 seconds to display battery
voltage on the LCD (e.g. 2_37, equal to 2.37 V, see example). After checking
the voltage, please release the button, because after additional 5 seconds, the
device may turn off. The unit will then return to displaying time. The voltage for
fresh alkaline batteries should be over 3 V and for fully charged accumulators
over 2.5 V.
Set a patient event marker
The patient can mark any event without starting a manual blood pressure
measurement by pressing the EVENT button brieÀ y. A typical causes for this
use is taking medicine. The patient should be instructed to record the reason for
setting an event marker in a diary (see Patient’s Quick Guide and template for
patient diary at the end of this user manual).
Mark time of going to bed and rising from bed
If the DAY/NIGHT shift function is disabled during programming, the patient can
press the DAY/NIGHT button to mark the time of going to bed (in the evening)
and rising from bed (in the morning).
Manual DAY/NIGHT shift
If this function is enabled during the programming, then the patient can manually
shift the measurement frequency period (day or night) by pressing the DAY/NIGHT
button. The shift is available in the two hour period before the prescheduled shift.
IM_EN.indd 10 19/07/2012 14:30:02
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Omron M24-7 ABPM bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Omron M24-7 ABPM in de taal/talen: Engels als bijlage per email.

De handleiding is 0,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info