519111
13
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
USER PROGRAMS
After using the Mode key to enter your personal data, and
conrming your entries, you are automatically taken to the
Program menu.
The top computer line will ash originally, starting with a P
and various programs.
1. You can press the Up and Down keys to choose
between the individual programs. Manual
Program - 12 Program proles
USER
HRC
WATT
2. Press the Mode key to conrm your selection.
Quick start and manual program
Before you can start exercising, you must enter the follow-
ing data on the computer:
Time, Distance, Calories (approx. calorie consumption),
Pulse.
Use the Up and Down keys to set the values. Pressing the
Mode/Conrm key takes you to the next value that you
need to enter.
When you have nished the entries, press the Start button
to start exercising.
You can manually adjust the resistance during training by
pressing the + Up and - Down keys.
PROGRAM
1. You must set the desired exercise time rst. To do so,
press the Up and Down keys and conrm your entries
by pressing the Mode key.
2. Then use the Up and Down keys to select the desired
exercise prole. Press the Mode key to conrm the
prole. You can adjust the training resistance during
training by pressing the Up and Down keys.
H.R.C.
1. Start by entering your age using the Up and
Down keys and conrm your entries by pressing
the Mode key.
2. You can also set your target pulse between 30
and 230 manually using the Up and Down keys.
3. Press the Start key to start training.
4. Note: The computer will now set a pedal resist-
ance at which you can train constantly at your
target pulse frequency; i.e. while you are exercis-
ing as long as your pulse frequency is below the
target pulse frequency, the pedal resistance level
will automatically be raised by one level every
30 seconds and automatically reduced by one
load level every 15 seconds once you reach the
set value. If you reach the lowest load level, "1",
and if your pulse frequency is still above the set
value, an audible signal is issued 6 times every
30 seconds and the computer program stops
automatically.
USER PROGRAM
You can select the load levels yourself in this mode; you
have a choice of 16 load levels and 16 program segments.
1. The display for load segment 1 ashes. You can press
the Up and Down keys to vary the load intensity
between 1 and 32. After setting your preferred load in-
tensity, press the Mode key in each program segment
to store your entry.
2. You can press the START/STOP key to start your exer-
cise program directly.
If you would like to additionally preset individual exercise
values, press the START/STOP key and use the Up and
Down keys to adjust the settings.
A TIME message ashes on the lower display. Enter your
training values. You can press the Mode key to conrm
your entries for each function. Preset options for TIME,
DISTANCE, CALORIES and PULSE.
Note:
You can return to the main menu from any other mode at
any time by selecting Pause mode (a letter P ashes top
left in the display) and pressing the RESET key. You can
then select one of the programming options described
above.
OMB2010 Tagma_Instructions manual 2011_GB.indd 13 23.01.2012 17:21:17
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Omni OMB2010 - Tagma bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Omni OMB2010 - Tagma in de taal/talen: Engels als bijlage per email.

De handleiding is 3,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info