471049
51
Verklein
Vergroot
Pagina terug
1/61
Pagina verder
DIGITAL CAMERA
FE-46/X-42/X-41
Thank you for purchasing an Olympus digital camera. Before you start to
use your new camera, please read these instructions carefully to enjoy
optimum performance and a longer service life. Keep this manual in a
safe place for future reference.
We recommend that you take test shots to get accustomed to your
camera before taking important photographs.
In the interest of continually improving our products, Olympus reserves
the right to update or modify information contained in this manual.
The screen and camera illustrations shown in this manual were produced
during the development stages and may differ from the actual product.
Instruction Manual
Preparing the Camera
“Preparing the Camera” (p. 10)
Names of Parts .................................6
Preparing the Camera ....................10
Shooting, Playback, and Erasing
...14
Using Shooting Modes ...................17
Using Shooting Functions .............19
Using Playback Features ...............23
Menus for Shooting Functions ......24
¾
¾
¾
¾
¾
¾
¾
Menus for Playback, Editing, and
Printing Functions ..........................28
Menus for Other Camera Settings
.. 30
Printing ............................................ 34
Using OLYMPUS Master 2..............39
Usage Tips ......................................41
Appendix ......................................... 45
Index ................................................ 59
¾
¾
¾
¾
¾
¾
¾
Contents
Contents
Step
2
Shooting and Playing Back Images
“Shooting, Playback, and Erasing” (p. 14)
Step
3
How to Use the Camera
“Three Types of Setting Operations” (p. 3)
Step
4
Printing
“Direct printing (PictBridge)” (p. 34)
“Print Reservations (DPOF)” (p. 37)
Step
5
2
EN
Checking the contents of the box
Step
1
Other accessories not shown: Instruction Manual (this manual), OLYMPUS Master 2, warranty card.
Contents may vary depending on purchase location.
Digital camera
Strap Two AA batteries USB cable
microSD AttachmentAV cable
1
Press the m button.
This example describes how to use the
menus to set the [POWER SAVE].
CAMERA MENU
MENU
EXIT SET
OK
Shooting mode top menu
2
Use klmn to select the desired
menu, and press the B button.
Pressing and
holding the E
button displays
an explanation
(menu guide)
of the selected
option.
BACKUP
NO
1
2
3
SETUP
SET
OK
ENGLISH
PIXEL MAPPING
MEMORY FORMAT
MENU
EXIT
Submenu 1
Please read “Menu Settings” (p. 24 to 33) while referring to this page.
3
Use kl to select the desired
Submenu 1, and press the
B button.
1
2
3
SETUP
MENU
EXIT SET
OK
POWER SAVE OFF
NTSCVIDEO OUT
ALKALINEBATTERY TYPE
1
2
3
SETUP
MENU
SET
OK
BACK
POWER SAVE OFF
NTSCVIDEO OUT
ALKALINEBATTERY TYPE
POWER SAVE
OFF
ON
Page tab Submenu 2
To quickly move to the desired submenu,
press m to highlight the page tab, and then
use kl to move the page. Press n to
return to the submenu.
Some menus include submenus that
appear by pressing the B button.
4
Use kl to select Submenu 2,
and press the B button.
Once a setting is selected, the display
returns to the previous screen.
There may
be additional
operations.
“Menu Settings”
(p. 24 to 33)
1
2
3
SETUP
MENU
EXIT SET
OK
POWER SAVE ON
NTSCVIDEO OUT
ALKALINEBATTERY TYPE
5
Press the m button to complete
the setting.
Three Types of Setting Operations
Using the Menu
Using the Menu
Various camera settings can be accessed through
the menus, including functions used during shooting
and playback and the date/time and screen display.
There may be menus that are unavailable
depending on other related settings or the
s
mode (p. 17).
m button
Arrow pad
B button
Buttons in use
E button
3
EN
4
EN
Using the FUNC Menu (p. 22)
Using the FUNC Menu (p. 22)
Frequently used shooting menu functions can be set with less
steps using the FUNC menu.
Using the Direct Buttons
Using the Direct Buttons
Frequently used shooting functions can be accessed using the
direct buttons.
Shutter button (p. 14)
K
button (shooting/switching shooting modes)
(p. 17, 18)
q button (playback) (p. 15)
Zoom buttons (p. 19)
F button (exposure compensation) (p. 20)
& button (macro) (p. 20)
# button ( ash) (p. 19)
Y button (self-timer) (p. 21)
g/E button (changing information display/
menu guide) (p. 22, 23/p. 17)
/D button (backlight boost/erase)
(p. 21/p. 16, 29)
B button (p. 22)
Arrow pad
Buttons in use
B button
5
EN
1 G SLIDESHOW .............. p. 28
2 H PERFECT FIX ............ p. 28
3 I EDIT
Q (Resize) ............... p. 28
P (Crop) ................... p. 28
Menus for Playback, Editing, and Printing Functions
In playback mode, settings can be adjusted.
MENU
EXIT SET
OK
PLAYBACK MENU
2
3
4
5
6
7
8
1
Playback mode top menu
4 J PLAYBACK MENU
0 (Protect) .............. p. 28
y (Rotate).................. p. 29
R (Add sound to still
images) ................... p. 29
5 K ERASE ....................... p. 29
6 L PRINT ORDER ........... p. 29
7 E SETUP
*
*
Same as “Menus for
Shooting Functions”
8 F SILENT MODE ........... p. 33
1 A IMAGE QUALITY ........ p. 24
2 B CAMERA MENU
WB .............................. p. 25
ISO ............................. p. 25
R (Still images/movies)
................................ p. 25
PANORAMA ............... p. 26
AF MODE ................... p. 26
3 C SWITCH SHOOTING
MODES
P ................................ p. 14
G ............................ p. 17
DIS MODE .................. p. 18
s ........................... p. 17
MOVIE ........................ p. 18
4 Q MAGIC FILTER ...........p. 27
5 D RESET ........................ p. 27
6 E SETUP
MEMORY FORMAT/
FORMAT ................. p. 30
BACKUP ..................... p. 30
W (Language) .......p. 30
PIXEL MAPPING ........ p. 30
K/q ........................ p. 31
SAVE SETTINGS ....... p. 31
MENU COLOR ........... p. 31
BEEP .......................... p. 31
s (Monitor) .............. p. 31
X (Date/time) ........... p. 31
VIDEO OUT ................ p. 32
POWER SAVE ............ p. 33
BATTERY TYPE ......... p. 33
7 F SILENT MODE ........... p. 33
Menu Index
Menus for Shooting Functions
In shooting mode, settings can be adjusted.
MENU
EXIT SET
OK
CAMERA MENU
5
1
2
3
6
7
4
Shooting mode top menu
6
EN
Names of Parts
1 Strap eyelet .................................p. 10
2 Battery/card
compartment cover .....................p. 10
3 Microphone ...........................p. 25, 29
4 Flash ...........................................p. 19
Camera unit
8
7
1
3
4
5
6
2
5 Self-timer lamp ............................p. 21
6 Lens ......................................p. 45, 58
7 Tripod socket
8 Multi-connector ...............p. 32, 34, 39
7
EN
3
1
4
5
7
8
12
10
11
9
2
6
1 n button ............................p. 12
2 g/E button (changing information
display/menu guide) .....p. 22, 23/p. 17
3 Monitor ..................................p. 14, 41
4 m button .................................p. 3
5 /D button (backlight boost/erase)
................................p. 21/p. 16, 29
6 Shutter button .............................p. 14
7 Zoom buttons ..............................p. 19
8 Card access lamp .......................p. 46
9
K
button (shooting/
switching shooting modes) ...p. 17, 18
10 q button (playback) ..................p. 15
11 B button (OK/FUNC) ..............p. 3, 22
12 Arrow pad ...............................p. 3, 12
F button (exposure compensation)
..........................................p. 20
& button (macro) ...................p. 20
Y button (self-timer) ..............p. 21
# button ( ash) ......................p. 19
8
EN
Monitor
Shooting mode display
+2.0 1/30 F3.5
P
4
IN
ISO
400
N
ORM
1
6
8
7
10121314 911
18
17
16
15
2 4 53
+2.0
IN
00:34
QVGA
15
1
8
7
10 91114
18
16
15
2 4 53
12M12M
Still image Movie
1 Shooting mode ............................p. 14
2 Flash mode .................................p. 19
3 Silent mode .................................p. 33
4 Macro/super macro .....................p. 20
5 Battery check ..............................p. 10
6 Flash standby/camera shake
warning/ ash charge .............p. 19, 41
7 AF target mark ............................p. 14
8 Recording with sound .................p. 25
9 Number of storable still pictures/
remaining recording time ...p. 14/p. 18
10 Current memory ..........................p. 46
11 Self-timer ....................................p. 21
12 Aperture value ............................p. 14
13 Shutter speed .............................p. 14
14 Exposure compensation .............p. 20
15 Compression/frame rate .............p. 24
16 Image size ..................................p. 24
17 ISO ..............................................p. 25
18 White balance .............................p. 25
9
EN
Playback mode display
12
M
2009.10.262009.10.26 12:30 4
+2.0
F3.5
10
IN
x
100-0004
N
ORM
1/1000
ISO 4
00
2
9
10
8
6
7
11
3
4 51
15
16
121314
2009.10.262009.10.26 12:30
100-0004
00:14
/
00:34
IN
QVGA
15
10
15
8
9
11
3
4 51
1213
Still image Movie
1 Silent mode .................................p. 33
2 Print reservations/
number of prints .................p. 37/p. 36
3 Adding sound ..............................p. 29
4 Protect ........................................p. 28
5 Battery check ..............................p. 10
6 Aperture value ............................p. 14
7 Exposure compensation .............p. 20
8 White balance .............................p. 25
9 Image size ..................................p. 24
10 File number ....................................... -
11 Frame number/
Elapsed time/total recording time
...........................................p. 15/p. 16
12 Current memory ..........................p. 46
13 Compression/frame rate .............p. 24
14 ISO ..............................................p. 25
15 Date and time .............................p. 12
16 Shutter speed .............................p. 14
10
EN
Preparing the Camera
2
For the types of batteries that can be used,
see “Battery handling precautions” (p. 45).
When using NiMH batteries, be sure they
are fully charged, and select [NiMH] for
[BATTERY TYPE]. [BATTERY TYPE] (p.33)
Turn off the camera before opening the
battery/card compartment cover.
When using the camera, be sure to close
the battery/card compartment cover.
When to replace the batteries
Replace the batteries when the error
message shown below appears.
BATTERY EMPTY
Monitor top right Error message
Flashes in red
Attaching the camera strap
Pull the strap tight so that it does not come
loose.
Loading the batteries and
the xD-Picture Card™ (sold
separately) into the camera
Do not insert anything other than an
xD-Picture Card or the microSD Attachment
into the camera.
1
3
2
1
Battery/card
compartment
cover
11
EN
Using the microSD card/
microSDHC card (sold
separately)
A microSD card or microSDHC card (hereafter
both will be referred to as microSD card) is also
compatible with this camera using the microSD
Attachment.
“Using the microSD Attachment” (p. 48)
1
Insert the microSD card into the
microSD Attachment.
Insert the card
entirely into the
attachment.
2
Insert the microSD Attachment into
the camera.
Notch
To remove the microSD card
Pull the microSD card straight out.
Do not touch the contact area of the
microSD Attachment and/or microSD card.
3
Index area
Notch
Insert the card straight until it clicks into
place.
Do not touch the contact area directly.
1
2
4
This camera allows the user to take pictures
using the internal memory even when
no xD-Picture Card (sold separately) is
inserted. “Using an xD-Picture Card” (p. 46)
“Number of storable pictures (still pictures)/
Continuous recording length (movies) in
the internal memory and xD-Picture Card”
(p. 47)
To remove the xD-Picture Card
12
Press the card in until it clicks and comes
out slightly, then grab the card and pull it out.
12
EN
Arrow pad and operation guide
The symbols 1243, displayed
on various setting and movie playback screens
indicate that the arrow pad be used.
2009.10.26 12:30
100-0004
00:14
/
00:34
IN
/
2009 10 26 12 30
OK
X
YMD
TIME
MENU
CANCEL SET
Y M D
0.0 +0.3
+0.7 +1.0
EXPOSURE COMP.
Arrow pad
4
2
1
3
Operation guides displayed at the bottom of the
screen indicate that the m button, B button,
zoom buttons, or D button be used.
1
4
2
5
3
6
IN
OK
MENU
BACK GO
SEL. IMAGE
T
W
SET
OK
D
MENU
EXIT SET
OK
CAMERA MENU
Operation guide
Setting the date and time
The date and time set here are saved to image
le names, date prints, and other data.
1
Press the n button to turn on
the camera.
The date and time setting screen is displayed
when the date and time are not set.
X
YM
YMD
DTIME
---- -- -- -- --
MENU
CANCEL
Date and time setting screen
2
Use kl to select the year for
[Y].
2009
-- -- -- --
X
YM
YMD
D TIME
MENU
CANCEL
3
Press n to save the setting for [Y].
2009
---- -- --
X
YM
YMD
DTIME
MENU
CANCEL
4
As in Steps 2 and 3, use klmn
and the B button to set [M] (month),
[D] (day), [TIME] (hours and
minutes), and [Y/M/D] (date order).
For a more accurate setting, press the
B button when the time signal hits
00 seconds.
To change the date and time, adjust the
setting from the menu. [X] (Date/time)
(p. 31)
13
EN
Changing the display language
The language for the menu and error messages
displayed on the monitor is adjustable.
1
Press the m button, and press
klmn to select [E] (SETUP).
MENU
EXIT SET
OK
SETUP
2
Press the B button.
1
2
3
BACKUP
NO
SETUP
ENGLISH
PIXEL MAPPING
MEMORY FORMAT
MENU
EXIT SET
OK
3
Use kl to select [W] and
press the B button.
4
Use klmn to select your
language and press the B button.
5
Press the m button.
14
EN
Shooting, Playback, and Erasing
2
Hold the camera and compose the
shot.
AUTO
Horizontal grip
Vertical grip
Monitor
When holding the camera, take care not to
cover the ash with your ngers, etc.
3
Press the shutter button halfway
down to focus on the subject.
When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
The camera was unable to focus if the AF target
mark ashes red. Try focusing again.
1/400 F3.5
P
AF target mark
Press halfway
Shutter speed
Aperture value
“Focusing” (p. 43)
Shooting with the optimum
aperture value and shutter
speed ( P mode)
In this mode, automatic shooting settings are
activated while also allowing changes to a
wide range of shooting menu functions such as
exposure compensation, white balance, etc. as
needed.
1
Press the n button to turn on
the camera.
12
M
4
IN
N
ORM
P
Monitor
(standby mode screen)
Number of storable still pictures (p. 47)
P mode indicator
If P mode is not displayed, press the K
button several times to select it.
Current shooting mode display
Press the n button again to turn off
the camera.
15
EN
4
To take the picture, gently press
the shutter button all the way down
while being careful not to shake the
camera.
1/400 F3.5
P
Image review screen
Press fully
To view images during shooting
Pressing the q button enables playback of
images. To return to shooting, either press
the
K
button or press the shutter button
halfway down.
To shoot movies
“Shooting movies (A mode)” (p. 18)
Viewing images
1
Press the q button.
1
IN
12
M
2009.10.26 12:30
100-0001
N
ORM
Playback image
Number of frames
2
Use klmn to select an image.
Displays
10 frames before
the current image
Displays next
image
Displays previous
image
Displays
10 frames after
the current
image
The display size of the images can be
changed. “Index view and close-up view”
(p. 23)
To play back movies
Select a movie, and press the B button.
2009.10.26 12:30
100-0004
4
IN
MOVIE PLAY
OK
Movie
The sound recorded in movie mode cannot
be played back with this camera. To listen to
the sound, connect to a TV or PC.
16
EN
Operations during movie playback
Fast-forward: Press and hold down n.
Rewind: Press and hold down m.
Pause: Press the B button.
2009.10.26 12:30
100-0004
00:12
/
00:34
IN
During playback
Elapsed time/
Total recording time
First (last) frame/frame advance:
During pause, press k to display the rst
frame, and press l to display the last
frame.
Press and hold down n to play a movie, and
press and hold down m to play a movie in
reverse.
Press the B button to resume playback.
2009.10.26 12:30
100-0004
00:14
/
00:34
IN
/
During pause
To stop movie playback
Press the m button.
Erasing images during
playback ( Single image erase)
1
Press the D button when the image
to be erased is displayed.
ERASE
OK
IN
YES
NO
SETCANCEL
MENU
2
Press k to select [YES], and
press the B button.
[K ERASE] (p. 29)
17
EN
*1
When the subject is dark, noise reduction is
automatically activated. This approximately doubles
the shooting time during which no other pictures can
be taken.
To take pictures of a moving subject
like a pet ([ PET])
1 Use kl to select [ PET], and
press the B button to set.
2 Hold the camera to align the AF target
mark on the subject and press l.
When the camera recognizes the subject,
the AF target mark automatically tracks the
subject movement to focus on it continuously.
“To focus on a moving subject continuously
(AF Tracking)” (p. 26).
Shooting with automatic
settings (
G
mode)
According to the scene, the camera
automatically selects the ideal shooting
mode from [PORTRAIT]/[LANDSCAPE]/
[NIGHT+PORTRAIT]/[SPORT]/[MACRO]. This
is a fully automatic mode that allows the user
to take pictures using the best mode for the
shooting scene simply by pressing the shutter
button. Settings in the shooting function menu
are not available in
G
mode.
1
Press the
K
button a few times to
set
G
.
The icon changes depending
on the scene that the camera
automatically selects.
12
M
4
IN
N
ORM
i
AUTO
AF ON
Press the shutter button halfway down or press the
g button to check which shooting mode the
camera has automatically selected.
The shooting mode changes in the order
of P,
G
,
h
,
s
,
A
each time the
K
button is pressed. By switching to other
shooting mode, most settings set in other
than P mode will be changed to the default
settings of the respective shooting mode.
Using the best mode for the
shooting scene (
s
mode)
1
Press the
K
button a few times to
set
s
.
PORTRAIT
SET
OK
MENU
EXIT
An explanation of the selected mode is displayed
while the E button is pressed and held.
2
Use kl to select the best
shooting mode for the scene, and
press the B button.
12
M
4
IN
N
ORM
Icon indicating
the scene mode
that is set
In
s
modes, the optimum shooting
settings are pre-programmed for speci c
shooting scenes. For this reason, settings
may not be changed in some modes.
Submenu 1 Application
B PORTRAIT/F LANDSCAPE/
G NIGHT SCENE
*1
/
M NIGHT+PORTRAIT/C SPORT/
N INDOOR/W CANDLE
*1
/
R SELF PORTRAIT/S SUNSET
*1
/
X FIREWORKS
*1
/V CUISINE/
d DOCUMENTS/ PET
The camera
takes a
picture using
the optimum
settings for
the scene
conditions.
Using Shooting Modes
18
EN
In some cases, the camera may not select
the desired shooting mode.
When the camera cannot identify which is
the optimal mode, P mode will be selected.
To focus on a moving subject
continuously (AF Tracking)
Press m to enter the AF tracking standby
condition. For details on procedure to start
tracking, see “To focus on a moving subject
continuously (AF Tracking)” (p. 26).
Using the digital image
stabilization mode (h mode)
This mode enables the user to reduce blur
that is caused by camera shake and subject
movement.
1
Press the
K
button a few times to
set h.
h mode indicator
4
IN
N
ORM
12
M
By switching to any of other shooting
modes, most function settings in h mode
will change to the default settings of the
newly selected mode.
Shooting movies (n mode)
1
Press the
K
button a few times to
set n.
A mode indicator
00:34
00:34
IN
QVGA
QVGA
15
15
2
Press the shutter button halfway
down to focus on the subject, and
gently press the button all the way
down to start recording.
Press halfway
Press fully
00:34
00:34
REC
REC
Lights up red when recording
Remaining recording time (p. 47)
3
Gently press the shutter button all
the way down to stop recording.
Sound will also be recorded.
During sound recording, only the digital
zoom can be used. To record a movie with
optical zoom, set [R] (movies) (p. 25) to
[OFF].
19
EN
Using the ash
The ash functions can be selected to best
match the shooting conditions.
1
Press the # button.
P
OK
OK
AUTO
SET
SET
FLASH AUTO
FLASH AUTO
AUTO
! # $
2
Use mn to select the setting option,
and press the B button to set.
Option Description
FLASH AUTO
The ash res automatically in
low-light or backlight conditions.
REDEYE
Pre- ashes are emitted to reduce
the occurrence of red eye in your
photos.
FILL IN
The ash res regardless of the
available light.
FLASH OFF The ash does not re.
Using the zoom
Pressing the zoom buttons adjusts the shooting
range.
Pressing the wide
(W) button
Pressing the telephoto
(T) button
12
M
P
4
IN
N
ORM
12
M
P
4
IN
N
ORM
Zoom bar
Optical zoom: 5x, digital zoom: 4x
Use of h mode (p. 18) is recommended
when shooting with the telephoto zoom.
The zoom bar appearance identi es the
status of the digital zoom.
Digital zoom
range
When using
optical zoom and
digital zoom
Optical zoom
range
Using Shooting Functions
20
EN
Adjusting the brightness
( Exposure compensation)
The standard brightness (appropriate exposure)
set by the camera based on the shooting mode
(except for
G
) can be adjusted brighter or
darker to obtain a desired shot.
1
Press the F button.
0.0
0.0
+0.3
+0.3
+0.7
+0.7
+1.0
+1.0
EXPOSURE COMP.
Exposure compensation value
2
Use klmn to select the desired
brightness, and press the B button.
Shooting closeups
( Macro shooting)
This function enables the camera to focus and
shoot subjects at close distances.
1
Press the & button.
P
OK
OK
SET
SET
OFF
OFF
OFF
% &
OFF
2
Use mn to select the setting option,
and press the B button to set.
Option Description
OFF Macro mode is deactivated.
MACRO
This enables shooting as close as
20 cm/7.9 in.
*1
(60 cm/23.6 in.
*2
) to
the subject.
SUPER MACRO
*3
This enables shooting as close as
3 cm/1.2 in. to the subject.
*1
When the zoom is at the widest (W) position.
*2
When the zoom is at the most telephoto (T) position.
*3
The zoom is automatically xed.
The ash (p. 19) and zoom (p. 19) cannot
be set during super macro shooting.
21
EN
Using the self-timer
After the shutter button is pressed all the way
down, the picture is taken after a short delay.
1
Press the Y button.
OFF
P
OKOK
N
ORM
SET
SELFTIMER
OFF
ON
Y
12M
2
Use kl to select the desired
setting option, and press the B
button to set.
Option Description
OFF The self-timer is deactivated.
ON
The self-timer lamp turns on for
approx. 10 seconds, then blinks
for approx. 2 seconds, and then
the picture is taken.
Self-timer shooting is automatically canceled
after one shot.
To cancel the self-timer after it starts
Press the Y button again.
Increasing the brightness of
the monitor ( Backlight boost)
Press in shooting mode. The monitor
becomes brighter. If there is no operation for 10
seconds, the previous brightness resumes.
22
EN
Using the FUNC menu
The FUNC menu provides the following menu
functions that can be quickly accessed and set.
[WB] (p. 25)•[A IMAGE QUALITY] (p. 24)
[ISO] (p. 25)
1
Press the B button.
WB AUTO
AUTO
5 3 1 w x y
12
M
ISO
AUTO
WB
AUTO
N
ORM
P
2
Use kl to select the menu
function and mn to select the
desired setting option, and then
press the B button to set.
Changing the shooting
information display
The display of the screen information can
be changed to best match the situation, for
example, the need for a clear view of the screen
or for making a precise composition by using the
grid display.
1
Press the g button.
The displayed shooting information changes in
the order shown below each time the button is
pressed. “Shooting mode display” (p. 8)
12
M
+2.0
P
4
IN
ISO
400
N
ORM
12
M
+2.0
P
4
IN
ISO
400
N
ORM
Normal
No information
Grid
23
EN
Index view and close-up view
Index view enables quick selection of a desired
image. Close-up view (up to 10x magni cation)
allows checking of image details.
1
Press the zoom buttons.
2009.10.26 4
IN
12:30
2009.10.26 12:30
10
x
4
IN
2009.10.26 12:30 4
IN
2009.10.26 12:30 4
IN
4
IN
12
M
2009.10.26 12:30
100-0004
N
ORM
WT
W
T
W
T
WT
W
T
Index view
Single-image view Closeup view
To select an image in index view
Use klmn to select an image, and
press the B button to display the selected
image in single-image view.
To scroll an image in close-up view
Use klmn to move the viewing area.
Changing the image
information display
Shooting information settings displayed on the
screen can be changed.
1
Press the g button.
The displayed image information changes in
the order shown below each time the button is
pressed.
2009.10.26 12:30 4
100-0004
IN
12
M
N
ORM
12
M
2009.10.26 12:30 4
100-0004
+2.0
F3.51/1000
IN
ISO
400
N
ORM
Normal
Detailed
No information
Using Playback Features
24
EN
Menus for Shooting Functions
In shooting mode, settings can be adjusted.
E
indicates the mode in which the function can be set.
The default settings of the function are highlighted in .
Selecting the appropriate image quality for your application [A IMAGE QUALITY]
A
IMAGE QUALITY
E
: P
G
h
s
n
Still pictures
Submenu 1 Submenu 2 Application
IMAGE SIZE
12M (3968×2976) Suitable for printing pictures larger than A3 (11×17 in.).
5M (2560×1920) Suitable for printing A4 (8.5×11 in.) pictures.
3M (2048×1536) Suitable for printing pictures up to A4 (8.5×11 in.).
2M (1600×1200) Suitable for printing A5 (5×7 in.) pictures.
1M (1280×960) Suitable for printing pictures at postcard size.
VGA (640×480)
Suitable for viewing pictures on a TV or using pictures in emails and
on websites.
16:9 (1920×1080) Suitable for playing pictures on a wide screen TV.
COMPRESSION
FINE Shooting at high quality.
NORMAL Shooting at normal quality.
Movies
Submenu 1 Submenu 2 Application
IMAGE SIZE
VGA (640×480) /
QVGA (320×240)
Select the image quality based on the image size and frame rate.
Higher frame rates provides smoother movie images.
FRAME RATE
N 30fps
*1
/
O 15fps
*1
*1
frames per second
“Number of storable pictures (still pictures)/Continuous recording length (movies) in the internal
memory and xD-Picture Card” (p. 47)
25
EN
Select the settings for the functions while referring to “Using the Menu” (p. 3).
Adjusting to a natural color scheme
[ WB]
B
CAMERA MENU X WB
E
: P
h
s
n
Submenu 2 Application
AUTO
The camera automatically adjusts
the white balance according to the
shooting scene.
5
For shooting outdoors under a
clear sky
3
For shooting outdoors under a
cloudy sky
1
For shooting under tungsten
lighting
w
For shooting under daylight
uorescent lighting (household
lighting, etc.)
x
For shooting under neutral
uorescent lighting (desk lamps,
etc.)
y
For shooting under white
uorescent lighting (of ces, etc.)
Selecting the ISO sensitivity [ISO]
B
CAMERA MENU X ISO
E
: P
Abbreviation for the International
Organization for Standardization. ISO
standards specify the sensitivity for digital
cameras and lm, thus codes such as “ISO
100” are used to represent sensitivity.
In the ISO setting, although smaller values
result in less sensitivity, sharp images can
be taken under fully lit conditions. Larger
values result in higher sensitivity, and
images can be taken at fast shutter speeds
even under low light conditions. However,
high sensitivity introduces noise into the
resulting picture, which may give it a grainy
appearance.
Submenu 2 Application
AUTO
The camera automatically adjusts
the sensitivity according to the
shooting scene.
100/200/400/
800/1600
The value of the ISO sensitivity
is xed.
Recording sound when shooting still
images [R]
B
CAMERA MENU X R
E
: P
h
s
Submenu 2 Application
OFF No sound is recorded.
ON
The camera automatically starts
recording sound for approx.
4 seconds after a picture is taken.
This is useful for recording notes
or comments about the picture.
When recording, aim the microphone (p. 6)
at the source of the sound you want to
record.
The sound when recorded in still REC can
not be played back with this camera.
To listen to the sound, connect to a TV or
PC.
Selecting sound setting for movies [R]
B
CAMERA MENU X R
E
:
n
Submenu 2 Application
OFF No sound is recorded.
ON Sound is recorded.
When set to [ON], only the digital zoom can
be used during movie recording. To record
the movie with the optical zoom, set [R]
(movies) to [OFF].
The sound recorded in movie mode cannot
be played back with this camera.
To listen to the sound, connect to a TV or
PC.
26
EN
Creating panoramic images [ PANORAMA]
B
CAMERA MENU X PANORAMA
E
: P
h
s
Panorama shooting lets you create a panoramic picture, using the OLYMPUS Master 2
software on the provided CD-ROM.
The focus, exposure (p. 14), zoom position (p. 19), and [WB] (p. 25) are locked at the rst frame.
The ash (p. 19) is xed to $ (FLASH OFF) mode.
1 Use klmn to select the direction that the frames are combined.
2 Press the shutter button to take the rst frame, and then compose the second shot.
The part of the previous picture where it will be joined to the next picture does not remain in the frame. You
have to remember what the part in the frame looked like and take the next picture so it overlaps.
3 Repeat Step 2 until the number of desired frames is taken, and then press the B button
when nished.
When the g mark is displayed, you cannot continue shooting any further. Panorama shooting is
possible for up to 10 frames.
Refer to the OLYMPUS Master 2 help guide for details on how to make panorama images.
Selecting the focusing area [AF MODE]
B
CAMERA MENU X AF MODE
E
: P
h
s
Submenu 2 Application
FACE DETECT
*1
This is used for taking pictures of people (The camera automatically detects a face and a
frame appears). Press the shutter button halfway down, and when the face is in focus, the
green AF target mark appears. The orange target mark indicates that the area other than the
face is in focus.
iESP
This enables you to compose the shot without worrying about the focusing position. The
camera nds the subject to focus on and automatically adjusts the focus.
SPOT The camera focuses on the subject within the AF target mark.
AF TRACKING The camera tracks the subject movement automatically to focus on it continuously.
*1
For some subjects, the frame may not appear or may take some time to appear.
To focus on a moving subject continuously (AF Tracking)
1 Hold the camera to align the AF target mark on the subject and press l.
2 When the camera recognizes the subject, the AF target mark automatically tracks the subject
movement to focus on it continuously.
3 To cancel the tracking, press l or any other buttons.
Depending on the subjects or the shooting conditions, the camera may be unable to lock the focus or
fail to track the subject movement.
When the camera fails to track the subject movement, the AF target mark changes to red.
27
EN
Select the settings for the functions while referring to “Using the Menu” (p. 3).
Switching the shooting modes
[C SWITCH SHOOTING MODES]
C
SWITCH SHOOTING MODES
E
: P
G
h
s
n
Submenu 1 Application
P
Shooting with optimum aperture
value and shutter speed (p. 14).
G
Shooting with automatic settings
(p. 17).
DIS MODE
Using the digital image
stabilization mode (p. 18).
s
Using the best mode for the
shooting scene (p. 17).
MOVIE Shooting movies (p. 18).
Restoring the shooting functions to the
default settings [D RESET]
D
RESET
E
: P
G
h
s
n
Submenu 1 Application
YES
Restores the following menu
functions to the default settings.
Flash (p. 19)
Exposure compensation (p. 20)
Macro (p. 20)
Self-timer (p. 21)
[A IMAGE QUALITY] (p. 24)
[s ] (p. 17)
Menu functions in [B CAMERA
MENU] (p. 25 to 26)
NO
The current settings will not be
changed.
Shooting with special effects
[Q MAGIC FILTER]
Q
MAGIC FILTER
E
: P
1 Use klmn to select the desired
effect and press the B button.
After selecting the desired effect by pressing
the B button, all functions except zoom
cannot be changed.
28
EN
Menus for Playback, Editing, and
Printing Functions
Settings can be adjusted during image playback.
Playing back pictures automatically
[G SLIDESHOW]
G
SLIDESHOW
To start a slideshow
After pressing the B button, the slideshow
starts. To stop the slideshow, press the B
button or the m button.
The sound recorded when shooting cannot
be played back during slideshow.
To listen to the sound, connect to a TV or PC.
Retouching images [H PERFECT FIX]
H
PERFECT FIX
Edited or retouched images cannot be
retouched again.
Depending on the picture, the editing may
not be effective.
The retouching process may lower the
image resolution.
Submenu 1 Application
ALL
[LIGHTING FIX] and [REDEYE FIX]
are applied together.
LIGHTING FIX
Only sections darkened by backlighting
and dim lighting are brightened.
REDEYE FIX
Eyes that are reddened by the ash
are corrected.
1 Use kl to select a correction
method, and press the B button.
2 Use mn to select an image for retouching,
and press the B button.
The retouched image is saved as a separate
image.
Changing the image size [Q]
I
EDIT X Q
Submenu 2 Application
C 640 × 480
This saves a high-resolution image
as a separate image with a smaller
size for use in e-mail attachments
and other applications.
E 320 × 240
Cropping image [P]
I
EDIT X P
1 Use mn to select an image, and press the
B button.
2 Use the zoom buttons to select the size of
the cropping frame, and use klmn
to move the frame.
T
W
SET
OK
Cropping frame
3 Press the B button.
The edited image will be saved as a separate
image.
Protecting images [0]
J
PLAYBACK MENU X 0
Protected images cannot be erased by
[ERASE] (p. 16), [SEL. IMAGE], or [ALL
ERASE] (p. 29), but all images are erased
by [MEMORY FORMAT]/[FORMAT] (p. 30).
Submenu 2 Application
OFF Images can be erased.
ON
Images are protected so that
they cannot be erased except
by formatting of the internal
memory/card.
1 Use mn to select an image.
2 Use kl to select [ON].
3 If necessary, repeat Steps 1 and 2
to protect other images, and press the
B button.
29
EN
Select the settings for the functions while referring to “Using the Menu” (p. 3).
Rotating images [y]
J
PLAYBACK MENU X y
Submenu 2 Application
U +90°
The image is rotated 90°
clockwise.
V
The image is not rotated.
t –90°
The image is rotated 90°
counter-clockwise.
1 Use mn to select an image.
2 Use kl to select the rotation
direction.
3 If necessary, repeat Steps 1 and 2 to
make settings for other images, and press
the B button.
The new picture orientations will be saved
even after the power is turned off.
Adding sound to still images [R]
J
PLAYBACK MENU X R
Submenu 2 Application
YES
The camera adds (records) sound
for approx. 4 seconds while
playing back the image. This
is useful for recording notes or
comments about the image.
NO No sound is recorded.
1 Use mn to select an image, and press the
B button.
2 Aim the microphone toward the sound
source.
Microphone
3 Use kl to select [YES], and press
the B button.
Recording starts.
Erasing images [K ERASE]
K
ERASE
Submenu 1 Application
SEL. IMAGE
Images are individually selected
and erased.
ALL ERASE
All images in the internal memory
or card will be erased.
When erasing pictures in the internal memory,
do not insert the card into the camera.
When erasing pictures from the card, insert
a card into the camera in advance.
To individually select and erase
images [SEL. IMAGE]
1 Use kl to select [SEL. IMAGE], and
press the B button.
2 Use klmn to select the image to be
erased, and press the B button to add a
R mark to the image.
1
4
2
5
3
6
IN
OK
MENU
BACK GO
SEL. IMAGE
D
R mark
3 Repeat Step 2 to select the images to be
erased, and then press the D button to
erase the selected images.
4 Use kl to select [YES], and press
the B button.
The images with a R mark are erased.
To erase all images [ALL ERASE]
1 Use kl to select [ALL ERASE], and
press the B button.
2 Use kl to select [YES], and press
the B button.
Saving print settings to the image data
[L PRINT ORDER]
L
PRINT ORDER
“Print Reservations (DPOF)” (p. 37)
Print reservation can be set only for still
images that are recorded to the card.
30
EN
Erasing data completely
[ MEMORY FORMAT]/[ FORMAT]
E
SETUP X MEMORY FORMAT/FORMAT
Before formatting, check that no important
data is left in the internal memory or card.
Non-Olympus cards and cards that have
been formatted by a computer must be
formatted with this camera before use.
Submenu 2 Application
YES
Completely erases the image data
in the internal memory
*1
or card
(including protected images).
NO Cancels formatting.
*1
Be sure to remove the card before formatting the
internal memory.
Copying images in the internal memory
to the card [ BACKUP]
E
SETUP X BACKUP
Submenu 2 Application
YES
Backs up image data in the
internal memory to the card.
NO Cancels the backup.
It takes some time to back up data. Check
that the battery has suf cient power before
starting the backup.
Changing the display language [W]
E
SETUP X W
“Changing the display language” (p. 13)
Submenu 2 Application
Languages
*1
The language for the menus and
error messages displayed on the
monitor is selected.
*1
The available languages vary depending on the
country and/or region where the camera was
purchased.
Adjusting the CCD and the image
processing function [ PIXEL MAPPING]
E
SETUP X PIXEL MAPPING
This function has already been adjusted
at factory shipping, and no adjustment is
needed right after purchase. Approximately
once a year is recommended.
For best results, wait at least one minute
after taking or viewing pictures before
performing pixel mapping. If the camera is
turned off during pixel mapping, be sure to
perform it again.
To adjust the CCD and the image
processing function
Press the B button when [START]
(Submenu 2) is displayed.
The camera checks and adjusts the CCD and the
image processing function at the same time.
Menus for Other Camera Settings
31
EN
Select the settings for the functions while referring to “Using the Menu” (p. 3).
Selecting the menu screen color and
background [ MENU COLOR]
E
SETUP X MENU COLOR
Submenu 2 Application
NORMAL/
COLOR 1/
COLOR 2/
COLOR 3
Selects the menu screen color or
background image according to
your preference.
Setting the operation sound [ BEEP]
E
SETUP X BEEP
Submenu 2 Application
OFF/ON
Turns off or on the operating
sound/warning sound of the
camera buttons.
Adjusting the brightness of the monitor
[s]
E
SETUP X s
Submenu 2 Application
BRIGHT/
NORMAL
Selects the monitor brightness
depending on the surrounding
brightness.
Setting the date and time [X]
E
SETUP X X
“Setting the date and time” (p. 12)
To select the date display order
1 Press n after setting Minute, and use
kl to select the date display order.
X
Y M
YMD
D TIME
2009 10 26 12 30
MENU
CANCEL SET
YMD
OK
Date order
Turning on the camera with the K or
q button [ K/q]
E
SETUP X K/q
Submenu 2 Application
YES
Pressing K turns on the camera
and starts the camera in the
shooting mode.
Pressing q turns on the camera
and starts the camera in the
playback mode.
NO
The power is not turned on. To turn
on the camera, press the n
button.
Saving the mode when the camera is
turned off [SAVE SETTINGS]
E
SETUP X SAVE SETTINGS
Submenu 2 Application
YES
The shooting mode is saved
when the camera is turned off and
is reactivated the next time the
camera is turned on.
NO
The shooting mode is set to P
mode when the camera is turned
on.
When set to [NO], all shooting settings,
except for P mode, [A IMAGE QUALITY],
and the selected
s
mode, return to
default settings when the camera is turned
off.
32
EN
Selecting a video signal system to match your TV [ VIDEO OUT]
E
SETUP X VIDEO OUT
The TV video signal system varies depending on the countries and regions. Before viewing camera
images on your TV, select the video output according to your TV’s video signal type.
Submenu 2 Application
NTSC Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on.
PAL Connecting the camera to a TV in European countries, China, and so on.
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV
1 Connect the TV and camera.
Connect to the TV video
input jack (yellow) and
audio input jack (white).
Multi-connector
AV cable (supplied)
2 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/
[PAL]).
3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).”
For details on changing the input source of the TV, refer to the TV’s instruction manual.
4 Press the q button, and use klmn to select the image for playback.
Depending on the TV’s settings, the displayed images and information may become cropped.
33
EN
Select the settings for the functions while referring to “Using the Menu” (p. 3).
Saving battery power between shots
[ POWER SAVE]
E
SETUP X POWER SAVE
Submenu 2 Application
OFF Cancels [POWER SAVE].
ON
When the camera is not being
used for approx. 10 seconds, the
monitor automatically turns off to
save battery power.
To resume standby mode
Press any button.
Selecting the battery type
[ BATTERY TYPE]
E
SETUP X BATTERY TYPE
Submenu 2 Application
ALKALINE
Select this option when using
alkaline batteries.
NiMH
Select this option when using
NiMH batteries.
If [ALKALINE] is selected with NiMH
batteries, the camera may fail to turn on
when the batteries are low.
If [NiMH] is selected with alkaline batteries,
the camera may be turned off without
displaying the low battery warning (p. 10).
Turning off the camera sounds
[F SILENT MODE]
F
SILENT MODE
Submenu 1 Application
OFF
Button operation sound/warning
sound are not muted.
ON
The electronic sounds (button
operation sound, warning sound)
are muted.
[BEEP] (p. 31)
34
EN
Printing
2
Turn on the printer, and then
connect the printer and camera.
USB cable (supplied)
Multi-connector
OK
PC/CUSTOM PRINT
EASY PRINT START
n button
3
Press n to start printing.
4
To print another image, use mn
to select an image, and press the
B button.
To exit printing
After a selected image is displayed on the
screen, disconnect the USB cable from the
camera and printer.
PRINTEXIT
OK
Direct printing ( PictBridge
*1
)
By connecting the camera to a PictBridge-
compatible printer, you can print images directly
without using a computer.
To nd out if your printer supports PictBridge,
refer to the printer’s instruction manual.
*1
PictBridge is a standard for connecting digital
cameras and printers of different makers and
printing out pictures directly.
The printing modes, paper sizes, and other
parameters that can be set with the camera
vary depending on the printer that is used.
For details, refer to the printer’s instruction
manual.
For details on the available paper types,
loading paper, and installing ink cassettes,
refer to the printer’s instruction manual.
Printing images at the
printer’s standard settings
[ EASY PRINT]
1
Display the image to be printed on
the monitor.
“Viewing images” (p. 15)
Printing can also be started when the
camera is turned off. After performing Step
2, use kl to select [EASY PRINT],
press the B button. Use mn to select an
image, and press the B button.
35
EN
Changing the printer’s settings
for printing [ CUSTOM PRINT]
1
Follow Steps 1 and 2 for
[EASY PRINT] (p. 34), and press the
B button.
EASY PRINT
USB
SET
OK
EXIT
CUSTOM PRINT
PC
2
Use kl to select
[CUSTOM PRINT], and press the
B button.
3
Use kl to select the print
mode, and press the B button.
Submenu 2 Application
PRINT
This prints the image selected in
Step 6.
ALL PRINT
This prints all images stored in the
internal memory or card.
MULTI PRINT
This prints one image in a multiple
layout format.
ALL INDEX
This prints an index of all images
stored in the internal memory
or card.
PRINT ORDER
*1
This prints images based on the
print reservation data on the card.
*1
[PRINT ORDER] is available only when print
reservations have been made. “Print Reservations
(DPOF)” (p. 37)
4
Use kl to select [SIZE]
(Submenu 3), and press n.
If the [PRINTPAPER] screen is not
displayed, the [SIZE], [BORDERLESS],
and [PICS/SHEET] are set to the printer’s
standard.
STANDARDSTANDARD
PRINTPAPER
SET
OK
MENU
BACK
SIZE BORDERLESS
5
Use kl to select the
[BORDERLESS] or [PICS/SHEET]
settings, and press the B button.
Submenu 4 Application
OFF/ON
*1
The image is printed with a border
around it ([OFF]).
The image is printed to ll the
entire paper ([ON]).
(The number of
images per sheet
varies depending
on the printer.)
The number of images per sheet
([PICS/SHEET]) is selectable only
when [MULTI PRINT] is selected
in Step 3.
*1
The available settings for [BORDERLESS] vary
depending on the printer.
If [STANDARD] is selected in Steps 4 and 5,
the image is printed at the printer’s standard
settings.
100-0004
OK
4
IN
SINGLEPRINT MORE
PRINT
6
Use mn to select an image.
7
Press k to make a print
reservation for the current image.
Press l to make the detailed
printer settings for the current
image.
To make the detailed printer settings
1 Use klmn to select the setting, and
press the B button.
SET
OK
EXIT
MENU
1
PRINT INFO
DATE
FILE NAME
<x
WITHOUT
WITHOUT
P
36
EN
Submenu
5
Submenu
6
Application
<×
0 to 10
This selects the number
of prints.
DATE
WITH/
WITHOUT
Selecting [WITH] prints the
images with the date.
Selecting [WITHOUT]
prints the images without
the date.
FILE NAME
WITH/
WITHOUT
Selecting [WITH] prints the
le name on the image.
Selecting [WITHOUT] does
not print any le name on
the image.
P
(Proceeds
to the
setting
screen.)
This selects a portion of
the image for printing.
To crop an image [P]
1 Use the zoom buttons to select the size
of the cropping frame, use klmn
to move the frame, and then press the
B button.
Cropping
frame
T
W
SET
OK
2 Use kl to select [OK], and press
the B button.
P
MENU
BACK SET
OK
IN
OK
CANCEL
8
If necessary, repeat Steps 6 and 7
to select the image to be printed,
make the detailed settings, and set
[SINGLEPRINT].
9
Press the B button.
PRINT
SET
OK
MENU
BACK
PRINT
CANCEL
10
Use kl to select [PRINT], and
press the B button.
Printing starts.
When [OPTION SET] is selected in [ALL PRINT]
mode, [PRINT INFO] screen is displayed.
When printing is nished, the [PRINT MODE
SELECT] screen is displayed.
ALL PRINT
PRINT MODE SELECT
SET
OK
ALL INDEX
PRINT ORDER
MULTI PRINT
PRINT
EXIT
MENU
To cancel printing
1 When [TRANSFERRING] is displayed,
press the B button, use kl to select
[CANCEL], and then press the B button
again.
PRINT
SET
OK
CONTINUE
CANCEL
CANCEL
OK
TRANSFERRING
11
Press the m button.
12
When the message [REMOVE USB
CABLE] is displayed, disconnect
the USB cable from the camera and
printer.
37
EN
Print Reservations (DPOF
*1
)
In print reservations, the number of prints and
date imprint option are saved in the image on
the card. This enables easy printing at a printer
or print shop supporting DPOF by using only the
print reservations on the card without a computer
or a camera.
*1
DPOF is a standard for storing automatic printout
information from digital cameras.
Print reservations can be set only for the
images stored on the card. Insert a card
with recorded images before making print
reservations.
DPOF reservations set by another DPOF
device cannot be changed by this camera.
Make changes using the original device.
Making new DPOF reservations with this
camera will erase the reservations made by
the other device.
DPOF print reservations can be made for up
to 999 images per card.
Single-frame print
reservations [<]
1
Press the q button, and then press
the m button to display the top
menu.
2
Use klmn to select [L PRINT
ORDER], and press the B button.
PRINT ORDER
SET
OK
<
U
EXIT
MENU
3
Use kl to select [<], and
press the B button.
x
12M
2009.10.26 12:30
100-0004
4
0
N
ORM
SET
OK
4
Use mn to select the image for print
reservation. Use kl to select
the quantity. Press the B button.
SET
OK
MENU
BACK
DATE
TIME
NO
X
5
Use kl to select the [X] (date
print) screen option, and press the
B button.
Submenu 2 Application
NO This prints the image only.
DATE
This prints the image with the
shooting date.
TIME
This prints the image with the
shooting time.
OK
SETBACK
MENU
PRINT ORDER
SET
CANCEL
1
(
1
)
1
(
1
)
6
Use kl to select [SET], and
press the B button.
38
EN
Reserving one print each of all
images on the card [U]
1
Follow Steps 1 and 2 in [<] (p. 37).
2
Use kl to select [U], and
press the B button.
3
Follow Steps 5 and 6 in [<].
Resetting all print reservation
data
1
Press the q button, and then press
the m button to display the top
menu.
2
Use klmn to select [L PRINT
ORDER], and press the B button.
3
Select either [<] or [U], and press
the B button.
OK
SETBACK
MENU
PRINT ORDER SETTING
PRINT ORDERED
RESET
KEEP
4
Use kl to select [RESET], and
press the B button.
Resetting the print reservation
data for selected images
1
Follow Steps 1 and 2 of “Resetting
all print reservation data” (p. 38).
2
Use kl to select [<], and
press the B button.
3
Use kl to select [KEEP] and
press the B button.
4
Use mn to select the image with
the print reservation you want to
cancel. Use kl to set the print
quantity to “0”.
5
If necessary, repeat Step 4, and then
press the B button when nished.
6
Use kl to select the [X] (date
print) screen option, and press the
B button.
The settings are applied to the remaining images
with the print reservation data.
7
Use kl to select [SET], and
press the B button.
39
EN
Using OLYMPUS Master 2
System requirements and
installation of OLYMPUS
Master 2
Install the OLYMPUS Master 2 software by
referring to the included installation guide.
Connecting the camera to a
computer
1
Make sure the camera is turned off.
The monitor is off.
The lens is retracted.
2
Connect the camera to a computer.
The camera automatically turns on.
EASY PRINT
USB
SET
OK
EXIT
CUSTOM PRINT
PC
USB cable (supplied)
Multi-connector
Locate the position of the USB port by
referring to your computer’s instructions
manual.
3
Use kl to select [PC], and
press the B button.
The computer automatically detects the camera as
a new device on the rst connection.
Windows
After the computer detects the camera, a
message indicating setup completion appears.
Con rm the message and click “OK”. The
camera is recognized as a removable disk.
Macintosh
If iPhoto has started, exit iPhoto and start
OLYMPUS Master 2.
While the camera is connected to the
computer, shooting functions are disabled.
Connecting the camera to a computer via a
USB hub may cause unstable operation.
When [MTP] is set for the submenu that
appears by pressing n after selecting [PC]
in Step 3, images cannot be transferred to a
computer using OLYMPUS Master 2.
Starting OLYMPUS Master 2
1
Double-click the OLYMPUS Master 2
icon.
Windows
appears on the desk top.
Macintosh
appears in the OLYMPUS Master 2 folder.
Browse window appears after starting the
software.
When you start OLYMPUS Master 2 for the
rst time after installation, “Default Settings”
and “Registration” screen appear. Follow the
instructions on the screen.
40
EN
Operating OLYMPUS Master 2
When OLYMPUS Master 2 is started, the
Quick Start Guide appears with step-by-step
instructions for common tasks. When the
Quick Start Guide is not displayed, click
in the tool bar to show the Guide.
For details on the operation, refer to the help
guide of the software.
Transferring and saving
images without using
OLYMPUS Master 2
This camera is compatible with the USB Mass
Storage Class. You can transfer and save the
image data on your computer while the camera
and the computer are connected.
System requirements
Windows : Windows 2000 Professional/
XP Home Edition/
XP Professional/Vista
Macintosh : Mac OS X v10.3 or later
On a computer running Windows Vista, if
[MTP] is set for the submenu that appears
by pressing n after selecting [PC] in Step 3
of “Connecting the camera to a computer”
(p. 39), Windows Photo Gallery will become
available.
Even if a computer has USB ports, proper
operation is not guaranteed in the following
cases.
computers with USB ports installed using an
expansion card, etc.
computers without a factory-installed OS and
home-built computers
41
EN
Usage Tips
If the camera does not work as intended, or if
an error message is displayed on the screen,
and you are unsure of what to do, refer to the
information below to x the problem(s).
Troubleshooting
Battery
“The camera does not work even when
batteries are installed”.
Insert new or recharged batteries in the correct
direction.
“Loading the batteries and the xD-Picture Card
TM
(sold separately) into the camera” (p. 10)
If [ALKALINE] is selected with NiMH batteries, the
camera may fail to turn on when the batteries are
low. Be sure the batteries are fully charged, and
select [NiMH] for [BATTERY TYPE].
[BATTERY TYPE] (p. 33)
Battery performance may have been reduced
temporarily due to low temperature. Take the
batteries out of the camera, and warm them by
putting them in your pocket for a while.
Card/Internal memory
“An error message is displayed”.
“Error message” (p. 42)
Shutter button
“No picture is taken when the shutter
button is pressed”.
Cancel sleep mode.
To save battery power, the camera automatically
goes into sleep mode and the monitor turns off
if there is no operation for 3 minutes when the
camera is turned on. No picture is taken even if
the shutter button is fully pressed in this mode.
Operate the zoom buttons or other buttons to
restore the camera from sleep mode before
taking a picture. If the camera is left for another
12 minutes, it automatically turns off. Press the
n button to turn the camera on.
Press the K button to set a shooting mode.
Wait until #( ash charge) stops blinking before
taking pictures.
Monitor
“Dif cult to see”.
Condensation
*1
may have occurred. Turn off the
power, and wait for the camera body to become
acclimated to the surrounding temperature and dry
out before taking pictures.
*1
Dew drops can form in the camera when it is
suddenly taken from a cold location into a warm,
humid room.
“Vertical lines appear on the screen”.
This condition may occur when the camera is
pointed at an extremely bright subject under a
clear sky and so on. The lines do not appear,
however, in the nal image.
“The light is caught in the picture”.
Shooting with ash in dark situations results in
an image with many ash re ections on dust in
the air.
Date and time function
“Date and time settings return to the
default setting”.
If the batteries are removed and left out of the
camera for about a day
*2
, the date and time
settings return to the default setting, and must
be reset.
*2
The time until the date and time settings return
to the default setting varies depending on how
long the batteries have been loaded.
“Setting the date and time” (p. 12)
Miscellaneous
“The camera makes a noise when taking
pictures”.
The camera may activate the lens and make a
noise even if no operation is performed. This
is because the camera automatically performs
actions of auto focus as far as it is ready to shoot.
42
EN
Error message
When one of the messages below is
displayed on the monitor, check the
corrective action.
Error message Corrective action
q
CARD ERROR
Card problem
Insert a new card.
q
WRITE
PROTECT
Card problem
Use a computer to cancel the
read-only setting.
>
MEMORY FULL
Internal memory problem
Insert a card.
Erase unwanted images.
*1
q
CARD FULL
Card problem
Replace the card.
Erase unwanted images.
*1
OK
SET
CARD SETUP
CLEAN CARD
FORMAT
Card problem
Use kl to select
[CLEAN CARD], and press the
B button. Take out the card,
wipe the contact area (p. 46)
with a soft, dry cloth, and then
load the card again.
Use kl to select
[FORMAT], and press the
B button. Next, use kl
to select [YES], and press the
B button.
*2
IN
OK
SET
MEMORY SETUP
POWER OFF
MEMORY FORMAT
Internal memory problem
Use kl to select
[MEMORY FORMAT], and press
the B button. Next, use kl
to select [YES], and press the
B button.
*2
L
NO PICTURE
Internal memory/Card problem
Take pictures before viewing
them.
r
PICTURE
ERROR
Problem with selected image
Use photo retouch software,
etc. to view the image on a
computer. If the image still
cannot be viewed, the image le
is corrupted.
r
THE IMAGE
CANNOT
BE EDITED
Problem with selected image
Use photo retouch software, etc.
to edit the image on a computer.
CARD-COVER
OPEN
Operation problem
Close the battery/card
compartment cover.
g
BATTERY
EMPTY
Battery problem
Insert new batteries.
If using rechargeable batteries,
charge the batteries.
NO
CONNECTION
Connection problem
Connect the camera and
computer or printer correctly.
NO PAPER
Printer problem
Load paper into the printer.
NO INK
Printer problem
Re ll the ink in the printer.
JAMMED
Printer problem
Remove the jammed paper.
SETTINGS
CHANGED
*3
Printer problem
Return to the status where the
printer can be used.
PRINT ERROR
Printer problem
Turn off the camera and printer,
check the printer for any
problems, and then turn the
power on again.
r
CANNOT PRINT
*4
Problem with selected image
Use a computer to print.
*1
Before erasing important images, download them to
a computer.
*2
All data will be erased.
*3
This is displayed, for instance, when the printer’s
paper tray has been removed. Do not operate
the printer while making the print settings on the
camera.
*4
This camera may be unable to print images taken by
other cameras.
43
EN
Shooting tips
When you are unsure of how to take a picture
that you envision, refer to the information below.
Focusing
“Focusing on the subject”
Taking a picture of a subject not in the center
of the screen
After focusing on an object at the same distance
as the subject, compose the shot, and take the
picture.
Pressing the shutter button halfway (p. 14)
Set [AF MODE] (p. 26) to [iESP]
Taking a picture in [AF TRACKING] mode
(p. 26)
The camera tracks the subject movement
automatically to focus on it continuously.
Taking a picture of subjects where autofocus
is dif cult
In the following cases, after focusing on an object
(by pressing the shutter button halfway down) with
high contrast at the same distance as the subject,
compose the shot, and take the picture.
Subjects with low contrast
When extremely bright objects
appear in the center of the
screen
Object with no vertical lines
*1
*1
It is also effective to compose the shot by holding the
camera vertically to focus, and then returning to the
horizontal position to take the picture.
When objects are at different
distances
Fast-moving object
The subject is not in the center
of the frame
Camera shake
“Taking pictures without camera shake”
Taking pictures using h mode (p. 18)
Select j (SPORT) in
s
mode (p. 17)
The j (SPORT) mode uses a fast shutter speed
and can reduce the blur incurred by a moving
subject.
Taking pictures at a high ISO sensitivity
If a high ISO sensitivity is selected, pictures can
be taken at a high shutter speed even at locations
where a ash cannot be used.
[ISO] (p. 25)
Exposure (brightness)
“Taking pictures with the right
brightness”
Taking pictures using [FACE DETECT] (p. 26)
Appropriate exposure is obtained for a face
against backlight, and the face is brightened.
Taking pictures using [FILL IN] (p. 19) ash
A subject against backlight is brightened.
Taking pictures using exposure compensation
(p. 20)
Adjust the brightness while viewing the screen
for taking the picture. Normally, taking pictures of
white subjects (such as snow) results in images
that are darker than the actual subject. Use the
F button to adjust in the positive (+) direction
to express whites as they appear. When taking
pictures of black subjects, on the other hand, it is
effective to adjust in the negative (-) direction.
44
EN
Color hue
“Taking pictures with colors at the same
shade as they appear”
Taking pictures by selecting [WB] (p. 25)
Best results in most environments can normally
be obtained with the AUTO setting, but for some
subjects, you should try experimenting with
different settings. (This is especially true for
sunshade under a clear sky, mixed natural and
arti cial light settings, and so on.)
Taking pictures using [FILL IN] (p. 19) ash
Use of the ash is also effective for shooting under
uorescent and other arti cial lighting.
Image quality
“Taking sharper pictures”
Taking pictures with the optical zoom
Avoid using digital zoom (p. 19) to take pictures.
Taking pictures at a low ISO sensitivity
If the picture is taken with a high ISO sensitivity,
noise (small colored spots and color unevenness
that were not in the original image) can occur, and
the image can appear grainy. The resulting image
is grainier than with low ISO sensitivity as well.
[ISO] (p. 25)
Batteries
“Making batteries last longer”
Avoid any of the following operations when not
actually taking pictures because they deplete
the battery power
Repeatedly pressing the shutter button
halfway
Repeatedly using the zoom
Set [POWER SAVE] (p. 33) to [ON]
Playback/Editing tips
Playback
“Playing images in the internal memory
and card”
Remove the card when playing pictures in the
internal memory
“Loading the batteries and the xD-Picture
Card™ (sold separately) into the camera”
(p. 10)
“Using the microSD card/microSDHC card
(sold separately)” (p. 11)
Editing
“Erasing the sound recorded to a still
image”
Record over the sound with silence when
playing back the image
“Adding sound to still images [R]” (p. 29)
45
EN
Appendix
Battery handling precautions
In addition to the batteries provided with the
camera, the following types of battery can be
used. Choose the power source best suited to
the situation.
AA alkaline batteries
The number of pictures that you can take may
vary considerably depending on the battery
manufacturer and shooting conditions.
AA NiMH batteries (rechargeable batteries)
Olympus NiMH batteries are rechargeable and
economical. For details, refer to the instruction
manual for your charger.
Caution:
Use only batteries approved for use in
this product. Otherwise it could result in
explosion.
Follow the instructions in this manual (p. 51)
when disposing used batteries.
The following types of batteries cannot be
used:
Lithium battery pack (CR-V3)/AA (R6)
manganese (zinc-carbon) batteries/AA (R6)
oxyride batteries/AA (R6) lithium batteries
Power consumption by the camera varies
depending on which functions are used.
Power is consumed continuously during the
conditions described below causing batteries
to become exhausted quickly.
The zoom is used repeatedly.
The shutter button is pressed halfway
repeatedly in shooting mode, activating the
auto focus.
A picture is displayed on the monitor for an
extended period of time.
The camera is connected to a computer or
printer.
Battery life varies depending on the type of
battery, manufacturer, shooting conditions,
etc. Similarly, the camera may turn off without
displaying the battery level warning or may
display the battery level warning more quickly.
Camera care
Exterior
Wipe gently with a soft cloth. If the camera is
very dirty, soak the cloth in mild soapy water
and wring well. Wipe the camera with the
damp cloth and then dry it with a dry cloth. If
you have used the camera at the beach, use a
cloth soaked in clean water and wrung well.
Monitor
Wipe gently with a soft cloth.
Lens
Blow dust off the lens with a commercial
blower, then wipe gently with a lens cleaner.
Do not use strong solvents such as benzene
or alcohol, or chemically treated cloth.
Mold may form on the lens surface if the
lens is left dirty.
Storage
When storing the camera for extended periods,
remove the battery and card, and keep in a
cool, dry place that is well ventilated.
Periodically insert the battery and test the
camera functions.
Avoid leaving the camera in places where
chemical products are handled since this
may result in corrosion.
46
EN
Using an xD-Picture Card
A card (and internal memory) also corresponds
to the lm that records images in a lm camera.
Otherwise, the recorded images (data) can be
erased, and retouching is also available with
the use of a computer. Cards can be removed
from the camera and exchanged, but this is
not possible with the internal memory. Use of
larger capacity cards enables you to take more
pictures.
Index area
(Notes can be lled in
here)
Contact area
(Contact section of the
card with the internal
camera terminal)
Do not touch the contact area directly.
Cards compatible with this camera
xD-Picture Card (16MB to 2GB)
(TypeH/M/M+, Standard)
Using a new card
Before using a non-Olympus card or a card
that was used for another purpose in a
computer or other device, use [MEMORY
FORMAT]/[FORMAT] (p. 30) to format the
card.
Checking the image saving location
The memory indicator shows whether the
internal memory or card is being used during
shooting and playback.
Current memory indicator
IN
: Internal memory is being used
None: Card is being used
12M
2009.10.26 12:30 4
100-0004
IN
N
ORM
Current memory
indicator
Playback mode
12M
P
4
IN
N
ORM
Shooting mode
Even if [MEMORY FORMAT]/[FORMAT],
[ERASE], [SEL. IMAGE], or [ALL ERASE]
is performed, the data in the card is not
completely erased. When disposing of
the card, damage the card to prevent the
disclosure of personal data.
Readout/recording process of the card
Never open the battery/card compartment
cover or unplug the USB cable while the
camera is reading or writing data, which
is indicated by blinking of the card access
lamp. This can not only damage the image
data but also render the internal memory or
card unusable.
Card access lamp
47
EN
Number of storable pictures (still pictures)/Continuous recording length (movies) in the
internal memory and xD-Picture Card
Still pictures
IMAGE SIZE
COMPRES-
SION
Number of storable still pictures
Internal memory Using a 1GB xD-Picture Card
With sound Without sound With sound Without sound
D
3968×2976
L
2 2 151 152
M
5 5 296 300
H
2560×1920
L
6 6 353 359
M
12 13 673 695
I
2048×1536
L
10 10 565 576
M
21 21 1,102 1,141
J
1600×1200
L
17 17 913 940
M
32 35 1,728 1,880
K
1280×960
L
26 27 1,390 1,453
M
48 55 2,557 2,906
C
640×480
L
87 110 4,567 5,813
M
152 203 7,993 10,657
D
1920×1080
L
16 16 841 875
M
31 32 1,639 1,728
Movies
IMAGE SIZE
FRAME
RATE
Continuous recording length
Internal memory Using a 1 GB xD-Picture Card
With sound Without sound With sound Without sound
C
640×480
N
10 sec. 10 sec.
8 min. 59 sec.* 9 min. 5 sec.*
O
20 sec. 20 sec. 17 min. 48 sec. 18 min. 11 sec.
E
320×240
N
28 sec. 29 sec. 24 min. 43 sec. 25 min. 27 sec.
O
54 sec. 58 sec. 48 min. 2 sec. 50 min. 55 sec.
The maximum le size of a single movie is 2 GB, regardless of the capacity of the card.
* When using a TypeM or Standard xD-Picture Card, the maximum recording length will be 10
seconds.
Increasing the number of pictures that can be taken
Either erase unwanted images, or connect the camera to a computer or other device to save the
images, and then erase the images in the internal memory or card.
[ERASE] (p. 16), [SEL. IMAGE] (p. 29), [ALL ERASE] (p. 29), [MEMORY FORMAT]/[FORMAT]
(p. 30)
48
EN
Using the microSD Attachment
Do not use the attachment with Olympus
digital cameras that do not support this
microSD Attachment, as well as with other
brands of digital cameras, computers,
printers, and other devices that support
xD-Picture Card. Doing so not only may
damage the pictures taken, but may also
result in the malfunction of the device.
If the microSD card cannot be removed,
do not use force. Contact authorized
distributors/service centers.
Cards compatible with this camera
microSD card/microSDHC card
For a list of tested microSD cards, please
visit our website (http://www.olympus.com/).
Sending images
You can send images to a computer or a
PictBrige printer by using the USB cable
provided with the camera.
To send data to other devices, remove
the attachment from the camera and use
a commercially available microSD card
adapter.
Handling precautions
Do not touch the contact area of the
attachment or microSD card. Doing so
may cause failure in reading the images.
When ngerprints or stains are found on
the contact area, wipe the area with a soft
dry cloth.
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED OLYMPUS
SERVICE PERSONNEL.
An exclamation mark enclosed in a
triangle alerts you to important operating
and maintenance instructions in the
documentation provided with the product.
DANGER If the product is used without observing
the information given under this symbol,
serious injury or death may result.
WARNING If the product is used without observing the
information given under this symbol, injury
or death may result.
CAUTION If the product is used without observing the
information given under this symbol, minor
personal injury, damage to the equipment,
or loss of valuable data may result.
WARNING!
TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK,
NEVER DISASSEMBLE, EXPOSE THIS PRODUCT TO
WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT.
General Precautions
Read All Instructions — Before you use the
product, read all operating instructions. Save all
manuals and documentation for future reference.
CleaningAlways unplug this product from the
wall outlet before cleaning. Use only a damp
cloth for cleaning. Never use any type of liquid or
aerosol cleaner, or any type of organic solvent to
clean this product.
Attachments — For your safety, and to avoid
damaging the product, use only accessories
recommended by Olympus.
Water and Moisture — For precautions on
products with weatherproof designs, read the
weatherproo ng sections.
Location — To avoid damage to the product, mount
the product securely on a stable tripod, stand,
or bracket.
Power Source — Connect this product only to the
power source described on the product label.
Foreign Objects — To avoid personal injury, never
insert a metal object into the product.
Heat — Never use or store this product near any
heat source such as a radiator, heat register,
stove, or any type of equipment or appliance that
generates heat, including stereo ampli ers.
49
EN
Handling the Camera
WARNING
Do not use the camera near ammable or
explosive gases.
Do not use the ash and LED on people
(infants, small children, etc.) at close range.
You must be at least 1 m (3 ft.) away from the
faces of your subjects. Firing the ash too close
to the subject’s eyes could cause a momentary
loss of vision.
Keep young children and infants away from
the camera.
Always use and store the camera out of the
reach of young children and infants to prevent
the following dangerous situations which could
cause serious injury:
Becoming entangled in the camera strap,
causing strangulation.
Accidentally swallowing the battery, cards or
other small parts.
Accidentally ring the ash into their own eyes
or those of another child.
Accidentally being injured by the moving parts
of the camera.
Do not look at the sun or strong lights with the
camera.
Do not use or store the camera in dusty or
humid places.
Do not cover the ash with a hand while ring.
Do not insert anything into the microSD
Attachment other than the microSD card.
Other types of cards cannot be inserted into
microSD Attachment.
Do not insert anything other than an xD-Picture
Card or the microSD Attachment into the
camera.
If you insert a card by mistake, such as a microSD
card, do not use force. Contact authorized
distributors/service centers.
CAUTION
Stop using the camera immediately if you
notice any unusual odors, noise, or smoke
around it.
Never remove the batteries with bare hands,
which may cause a re or burn your hands.
Never hold or operate the camera with wet
hands.
Do not leave the camera in places where it may
be subject to extremely high temperatures.
Doing so may cause parts to deteriorate and, in
some circumstances, cause the camera to catch
re. Do not use the charger if it is covered (such
as a blanket). This could cause overheating,
resulting in re.
Handle the camera with care to avoid getting a
low-temperature burn.
When the camera contains metal parts,
overheating can result in a low-temperature
burn. Pay attention to the following:
When used for a long period, the camera will
get hot. If you hold on to the camera in this
state, a low-temperature burn may be caused.
In places subject to extremely cold
temperatures, the temperature of the camera’s
body may be lower than the environmental
temperature. If possible, wear gloves when
handling the camera in cold temperatures.
Be careful with the strap.
Be careful with the strap when you carry the
camera. It could easily catch on stray objects
and cause serious damage.
50
EN
Battery Handling Precautions
Follow these important guidelines to
prevent batteries from leaking, overheating,
burning, exploding, or causing electrical
shocks or burns.
DANGER
Use only the Olympus brand NiMH batteries and
proper tting charger.
Never heat or incinerate batteries.
Take precautions when carrying or storing
batteries to prevent them from coming into contact
with any metal objects such as jewelry, pins,
fasteners, etc.
Never store batteries where they will be exposed
to direct sunlight, or subjected to hightemperatures
in a hot vehicle, near a heat source, etc.
To prevent causing battery leaks or damaging their
terminals, carefully follow all instructions regarding
the use of batteries. Never attempt to disassemble
a battery or modify it in any way, solder, etc.
If battery uid gets into your eyes, ush your eyes
immediately with clear, cold running water and
seek medical attention immediately.
Always store batteries out of the reach of small
children. If a child accidentally swallows a battery,
seek medical attention immediately.
WARNING
Keep batteries dry at all times.
To prevent batteries from leaking, overheating
or causing a re or explosion, use only batteries
recommended for use with this product.
Never mix batteries (old and new batteries,
charged and uncharged batteries, batteries of
different manufacture or capacity, etc.).
Never attempt to charge alkaline, lithium or CR-V3
lithium battery packs.
Insert the battery carefully as described in the
operating instructions.
Do not use batteries if their body is not covered by
the insulating sheet or if the sheet is torn, as this
may cause uid leaks, re or injury.
CAUTION
Do not remove batteries immediately after using
the camera. Batteries may become hot during
prolonged use.
Always unload the battery from the camera before
storing the camera for a long period.
The following AA (R6) batteries cannot
be used.
Batteries whose bodies are only partially or not
at all covered by an insulating sheet.
Batteries whose - terminals are raised, but not
covered by an insulating sheet.
Batteries whose - terminals are at and not
completely covered by an insulating sheet.
(Such batteries cannot be used even if the
- terminals are partially covered.)
If NiMH batteries are not charged within the
speci ed time, stop charging them and do not
use them.
Do not use a battery if it is cracked or broken.
If a battery leaks, becomes discolored, deformed
or becomes abnormal in any other way during
operation, stop using the camera.
If a battery leaks uid onto your clothing or skin,
remove the clothing and ush the affected area
with clean, running cold water immediately. If
the uid burns your skin, seek medical attention
immediately.
Never subject batteries to strong shocks or
continuous vibration.
51
EN
Caution for Usage Environment
To protect the high-precision technology contained
in this product, never leave the camera in the
places listed below, no matter if in use or storage:
Places where temperatures and/or humidity
are high or go through extreme changes.
Direct sunlight, beaches, locked cars, or near
other heat sources (stove, radiator, etc.) or
humidi ers.
In sandy or dusty environments.
Near ammable items or explosives.
In wet places, such as bathrooms or in the rain.
When using products with weatherproof designs,
read their manuals as well.
In places prone to strong vibrations.
Never drop the camera or subject it to severe
shocks or vibrations.
When mounted on a tripod, adjust the position of
the camera with the tripod head. Do not twist the
camera.
Do not touch electric contacts on cameras.
Do not leave the camera pointed directly at the
sun. This may cause lens or shutter curtain
damage, color failure, ghosting on the CCD, or
may possibly cause res.
Do not push or pull severely on the lens.
Before storing the camera for a long period,
remove the batteries. Select a cool, dry location
for storage to prevent condensation or mold from
forming inside the camera. After storage, test the
camera by turning it on and pressing the shutter
button to make sure that it is operating normally.
Always observe the operating environment
restrictions described in the camera’s manual.
Battery Handling Precautions
Olympus NiMH batteries (included in some areas)
are intended for use only with Olympus digital
cameras. Never use these batteries with any other
device.
Always charge NiMH batteries (included in some
areas) before using them for the rst time, or if
they have not been used for a long period.
Always charge sets of batteries (included in some
areas) (2 or 4) together.
Do not use alkaline batteries unless it is absolutely
necessary. In some cases, alkaline batteries may
have a shorter service life than NiMH. Alkaline
battery performance is limited, especially at
low temperatures. The use of NiMH batteries is
recommended.
AA manganese (Zinc-Carbon) batteries cannot be
used with this camera.
When operating the camera with battery power
at low temperatures, try to keep the camera
and spare batteries as warm as possible.
Batteries which run down at low temperatures
may be restored after they are warmed at room
temperature.
Recommended temperature ranges for NiMH
batteries:
Operation ................... 0°C to 40°C (32°F to 104°F)
Charge ....................... 0°C to 40°C (32°F to 104°F)
Storage.......................-20°C to 30°C (-4°F to 86°F)
Using, charging or storing the batteries outside
these ranges could shorten battery life or affect
battery performance. Always unload the batteries
from the camera before storing the camera for a
long period.
Before using NiMH batteries, always read the
provided instructions.
The number of pictures you can take may vary
depending on the shooting conditions or batteries.
Before going on a long trip, and especially before
traveling abroad, purchase an ample supply of
extra batteries. The recommended batteries may
be dif cult to obtain while traveling.
Please recycle batteries to help save our planet’s
resources. When you throw away dead batteries,
be sure to cover their terminals and always
observe local laws and regulations.
52
EN
LCD Monitor
Do not push the monitor forcibly; otherwise the
image may become vague, resulting in a playback
mode failure or damage to the monitor.
A strip of light may appear on the top/bottom of the
monitor, but this is not a malfunction.
When a subject is viewed diagonally in the
camera, the edges may appear zigzagged on the
monitor. This is not a malfunction; it will be less
noticeable in playback mode.
In places subject to low temperatures, the LCD
monitor may take a long time to turn on or its
color may change temporarily. When using the
camera in extremely cold places, it is a good idea
to occasionally place it in a warm place. An LCD
monitor exhibiting poor performance due to low
temperatures will recover in normal temperatures.
The LCD used for the monitor is made with
high-precision technology. However, black spots
or bright spots of light may appear constantly on
the LCD Monitor. Due to its characteristics or the
angle at which you are viewing the monitor, the
spot may not be uniform in color and brightness.
This is not a malfunction.
Legal and Other Notices
Olympus makes no representations or warranties
regarding any damages, or bene t expected by
using this unit lawfully, or any request from a third
person, which are caused by the inappropriate use
of this product.
Olympus makes no representations or warranties
regarding any damages or any bene t expected
by using this unit lawfully which are caused by
erasing picture data.
Disclaimer of Warranty
Olympus makes no representations or warranties,
either expressed or implied, by or concerning any
content of these written materials or software, and
in no event shall be liable for any implied warranty
of merchantability or tness for any particular
purpose or for any consequential, incidental or
indirect damages (including but not limited to
damages for loss of business pro ts, business
interruption and loss of business information)
arising from the use or inability to use these
written materials or software or equipment. Some
countries do not allow the exclusion or limitation
of liability for consequential or incidental damages
or of the implied warranty, so the above limitations
may not apply to you.
Olympus reserves all rights to this manual.
Warning
Unauthorized photographing or use of
copyrighted material may violate applicable
copyright laws. Olympus assumes no
responsibility for unauthorized photographing,
use or other acts that infringe upon the rights of
copyright owners.
Copyright Notice
All rights reserved. No part of these written
materials or this software may be reproduced
or used in any form or by any means, electronic
or mechanical, including photocopying and
recording or the use of any type of information
storage and retrieval system, without the prior
written permission of Olympus. No liability
is assumed with respect to the use of the
information contained in these written materials
or software, or for damages resulting from
the use of the information contained therein.
Olympus reserves the right to alter the features
and contents of this publication or software
without obligation or advance notice.
53
EN
FCC Notice
Radio and Television Interference
Changes or modi cations not expressly approved
by the manufacturer may void the user’s authority
to operate this equipment. This equipment has
been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide
reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
Adjust or relocate the receiving antenna.
Increase the distance between the camera and
receiver.
Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.
Consult your dealer or an experienced radio/TV
technician for help. Only the OLYMPUS-supplied
USB cable should be used to connect the
camera to USB enabled personal computers
(PC).
Any unauthorized changes or modi cations to
this equipment would void the user’s authority
to operate it.
For customers in North and South
America
For customers in USA
Declaration of Conformity
Model Number : FE-46/X-42/X-41
Trade Name : OLYMPUS
Responsible Party :
Address : 3500 Corporate
Parkway, P.O. Box
610, Center Valley, PA
18034-0610, U.S.A.
Telephone Number : 484-896-5000
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC
rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
For customers in Canada
This Class B digital apparatus meets all
requirements of the Canadian Interference-
Causing Equipment Regulations.
54
EN
OLYMPUS WORLDWIDE LIMITED
WARRANTY - IMAGING PRODUCTS
Olympus warrants that the enclosed Olympus®
imaging product(s) and related Olympus®
accessories (individually a “Product” and
collectively the “Products”) will be free from
defects in materials and workmanship under
normal use and service for a period of one (1)
year from the date of purchase.
If any Product proves to be defective within the
one-year warranty period, the customer must
return the defective Product to any of Olympus
Service Centers, following the procedure
set forth below (See “WHAT TO DO WHEN
SERVICE IS NEEDED”).
Olympus, at its sole discretion, will repair,
replace, or adjust the defective Product,
provided that Olympus investigation and
factory inspection disclose that (a) such defect
developed under normal and proper use and
(b) the Product is covered under this limited
warranty.
Repair, replacement, or adjustment of defective
Products shall be Olympus’s sole obligation and
the customer’s sole remedy hereunder.
The customer is liable and shall pay for shipment
of the Products to the Olympus Service Center.
Olympus shall not be obligated to perform
preventive maintenance, installation,
deinstallation, or maintenance.
Olympus reserves the right to (i) use
reconditioned, refurbished, and/or serviceable
used parts (that meet Olympus’s quality
assurance standards) for warranty or any other
repairs and (ii) make any internal or external
design and/or feature changes on or to its
products without any liability to incorporate such
changes on or to the Products.
WHAT IS NOT COVERED BY THIS
LIMITED WARRANTY
Excluded from this limited warranty and not
warranted by Olympus in any fashion, either
express, implied, or by statute, are:
(a) products and accessories not manufactured by
Olympus and/or not bearing the “OLYMPUS”
brand label (the warranty coverage for products
and accessories of other manufacturers,
which may be distributed by Olympus, is the
responsibility of the manufacturers of such
products and accessories in accordance with
the terms and duration of such manufacturers’
warranties);
(b) any Product which has been disassembled,
repaired, tampered with, altered, changed, or
modi ed by persons other than Olympus’s own
authorized service personnel unless repair
by others is made with the written consent of
Olympus;
(c) defects or damage to the Products resulting
from wear, tear, misuse, abuse, negligence,
sand, liquids, impact, improper storage,
nonperformance of scheduled operator and
maintenance items, battery leakage, use of non-
“OLYMPUS” brand accessories, consumables, or
supplies, or use of the Products in combination
with non-compatible devices;
(d) software programs;
(e) supplies and consumables (including but not
limited to lamps, ink, paper, lm, prints, negatives,
cables and batteries); and/or
(f) Products which do not contain a validly placed
and recorded Olympus serial number, unless they
are a model on which Olympus does not place
and record serial numbers.
EXCEPT FOR THE LIMITED WARRANTY
SET FORTH ABOVE, OLYMPUS MAKES
NO AND DISCLAIMS ALL OTHER
REPRESENTATIONS, GUARANTIES,
CONDITIONS, AND WARRANTIES
CONCERNING THE PRODUCTS, WHETHER
DIRECT OR INDIRECT, EXPRESS OR
IMPLIED, OR ARISING UNDER ANY STATUTE,
ORDINANCE, COMMERCIAL USAGE OR
OTHERWISE, INCLUDING BUT NOT LIMITED
TO ANY WARRANTY OR REPRESENTATION
AS TO THE SUITABILITY, DURABILITY,
DESIGN, OPERATION, OR CONDITON OF
THE PRODUCTS (OR ANY PART THEREOF)
OR THE MERCHANTABILITY OF THE
PRODUCTS OR THEIR FITNESS FOR A
PARTICULAR PURPOSE, OR RELATING
TO THE INFRINGEMENT OF ANY PATENT,
COPYRIGHT, OR OTHER PROPRIETARY
RIGHT USED OR INCLUDED THEREIN.
55
EN
IF ANY IMPLIED WARRANTIES APPLY AS
A MATTER OF LAW, THEY ARE LIMITED
IN DURATION TO THE LENGTH OF THIS
LIMITED WARRANTY.
SOME STATES MAY NOT RECOGNIZE
A DISCLAIMER OR LIMITATION OF
WARRANTIES AND/OR LIMITATION OF
LIABILITY SO THE ABOVE DISCLAIMERS AND
EXCLUSIONS MAY NOT APPLY.
THE CUSTOMER MAY ALSO HAVE
DIFFERENT AND/OR ADDITIONAL RIGHTS
AND REMEDIES THAT VARY FROM STATE
TO STATE.
THE CUSTOMER ACKNOWLEDGES AND
AGREES THAT OLYMPUS SHALL NOT
BE RESPONSIBLE FOR ANY DAMAGES
THAT THE CUSTOMER MAY INCUR FROM
DELAYED SHIPMENT, PRODUCT FAILURE,
PRODUCT DESIGN, SELECTION, OR
PRODUCTION, IMAGE OR DATA LOSS OR
IMPAIRMENT OR FROM ANY OTHER CAUSE,
WHETHER LIABILITY IS ASSERTED IN
CONTRACT, TORT (INCLUDING NEGLIGENCE
AND STRICT PRODUCT LIABILITY) OR
OTHERWISE. IN NO EVENT SHALL OLYMPUS
BE LIABLE FOR ANY INDIRECT, INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES OF
ANY KIND (INCLUDING WITHOUT LIMITATION
LOSS OF PROFITS OR LOSS OF USE),
WHETHER OR NOT OLYMPUS SHALL BE OR
SHOULD BE AWARE OF THE POSSIBILITY OF
SUCH POTENTIAL LOSS OR DAMAGE.
Representations and warranties made by any
person, including but not limited to dealers,
representatives, salespersons, or agents of
Olympus, which are inconsistent or in con ict
with or in addition to the terms of this limited
warranty, shall not be binding upon Olympus
unless reduced to writing and approved by an
expressly authorized of cer of Olympus.
This limited warranty is the complete and
exclusive statement of warranty which
Olympus agrees to provide with respect to the
Products and it shall supersede all prior and
contemporaneous oral or written agreements,
understandings, proposals, and communications
pertaining to the subject matter hereof.
This limited warranty is exclusively for the
bene t of the original customer and cannot be
transferred or assigned.
WHAT TO DO WHEN SERVICE IS NEEDED
The customer must transfer any image or other
data saved on a Product to another image or
data storage medium and/or remove any lm
from the Product prior to sending the Product to
Olympus for service.
IN NO EVENT SHALL OLYMPUS BE
RESPONSIBLE FOR SAVING, KEEPING OR
MAINTAINING ANY IMAGE OR DATA SAVED
ON A PRODUCT RECEIVED BY IT FOR
SERVICE, OR ON ANY FILM CONTAINED
WITHIN A PRODUCT RECEIVED BY IT
FOR SERVICE, NOR SHALL OLYMPUS BE
RESPONSIBLE FOR ANY DAMAGES IN
THE EVENT ANY IMAGE OR DATA IS LOST
OR IMPAIRED WHILE SERVICE IS BEING
PERFORMED (INCLUDING, WITHOUT
LIMITATION, DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES,
LOSS OF PROFITS OR LOSS OF USE),
WHETHER OR NOT OLYMPUS SHALL BE OR
SHOULD BE AWARE OF THE POSSIBILITY OF
SUCH POTENTIAL LOSS OR IMPAIRMENT.
Package the Product carefully using ample
padding material to prevent damage in transit
and either deliver it to the Authorized Olympus
Dealer that sold you the Product or ship it
postage prepaid and insured to any of our
Olympus Service Centers.
When returning Products for service, your
package should include the following:
1 Sales receipt showing date and place of
purchase.
2 Copy of this limited warranty bearing the
Product serial number corresponding to the
serial number on the Product (unless it is a
model on which Olympus does not place and
record serial numbers).
3 A detailed description of the problem.
4 Sample prints, negatives, digital prints (or les on
disk) if available and related to the problem.
When service is completed, the Product will be
returned to you postage prepaid.
WHERE TO SEND PRODUCT FOR
SERVICE
See “WORLDWIDE WARRANTY” for the
nearest service center.
INTERNATIONAL WARRANTY SERVICE
International warranty service is available under
this warranty.
56
EN
For customers in Europe
“CE” mark indicates that this product complies
with the European requirements for safety,
health, environment and customer protection.
“CE” mark cameras are intended for sales in
Europe.
This symbol [crossed-out wheeled bin WEEE
Annex IV] indicates separate collection of waste
electrical and electronic equipment in the EU
countries.
Please do not throw the equipment into the
domestic refuse.
Please use the return and collection systems
available in your country for the disposal of this
product.
This symbol [crossed-out wheeled bin Directive
2006/66/EC Annex II] indicates separate
collection of waste batteries in the EU countries.
Please do not throw the batteries into the
domestic refuse. Please use the return and
collection systems available in your country for
the disposal of the waste batteries.
Provisions of warranty
1 If this product proves to be defective, although it
has been used properly (in accordance with the
written Handling Care and Operating instructions
supplied with it), during the applicable national
warranty period and has been purchased from
an authorized Olympus distributor within the
business area of Olympus Imaging Europa GmbH
as stipulated on the website: http://www.olympus.
com this product will be repaired, or at Olympus’s
option replaced, free of charge. To claim under
this warranty the customer must take the product
before the end of the applicable national warranty
period to the dealer where the product was
purchased or any other Olympus service station
within the business area of Olympus Imaging
Europa GmbH as stipulated on the website:
http://www.olympus.com. During the one year
period of the World Wide Guarantee the customer
may turn the product in at any Olympus service
station. Please notice that not in all countries
such Olympus service station exists.
2 The customer shall transport the product to the
dealer or Olympus authorized service station
at his own risk and shall be responsible for any
costs incurred in transporting the product.
Provisions of Guarantee
1 “OLYMPUS IMAGING CORP., Shinjuku
Monolith, 2-3-1 Nishi-Shinjuku, Shinjuku-ku,
Tokyo 163-0914, Japan grants a one year World
Wide Guarantee. This worldwide Guarantee
must be presented at an Olympus authorized
repair service station before any repair can
be made under conditions of this Guarantee.
This Guarantee is valid only if the Guarantee
Certi cate and proof of purchase are presented
at the Olympus repair service station. Please note
that this Guarantee is in addition to and does not
affect the customer’s legal warranty rights under
the applicable national legislation governing the
sale of consumer goods mentioned above.
2 This Guarantee does not cover the following
and the customer will be required to pay repair
charge, even for defects occurring within the
Guarantee period referred to above.
Any defect that occurs due to mishandling
(such as an operation performed that is not
mentioned in the Handling Care or other
sections of the instructions, etc.)
Any defect that occurs due to repair,
modi cation, cleaning, etc. performed by
anyone other than Olympus or an Olympus
authorized service station.
Any defect or damage that occurs due to
transport, a fall, shock, etc. after purchase of
the product.
Any defect or damage that occurs due to re,
earthquake, ood damage, thunderbolt, other
natural disasters, environmental pollution and
irregular voltage sources.
Any defect that occurs due to careless or
improper storage (such as keeping the
product under conditions of high temperature
and humidity, near insect repellents such as
naphthalene or harmful drugs, etc.), improper
maintenance, etc.
Any defect that occurs due to exhausted
batteries, etc.
Any defect that occurs due to sand, mud, etc.
entering the inside of the product casing.
When the Guarantee Certi cate is not
returned with the product.
When any alterations whatsoever are made to
the Guarantee Certi cate regarding the year,
month and date of purchase, the customer’s
name, the dealer’s name, and the serial
number.
When proof of purchase is not presented with
this Guarantee Certi cate.
3 This Guarantee applies to the product only; the
Guarantee does not apply to any other accessory
equipment, such as the case, strap, lens cap and
batteries.
4 Olympus’s sole liability under this Guarantee shall
be limited to repairing or replacing the product.
Any liability under the Guarantee for indirect
or consequential loss or damage of any kind
incurred or suffered by the customer due to a
defect of the product, and in particular any loss
or damage caused to any lenses, lms, other
equipment or accessories used with the product
or for any loss resulting from a delay in repair or
loss of data, is excluded. Compelling regulations
by law remain unaffected by this.
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
57
EN
Notes regarding Guarantee
maintenance
1 This Guarantee will only be valid if the Guarantee
Certi cate is duly completed by Olympus or an
authorized dealer or other documents contain
suf cient proof. Therefore, please make sure
that your name, the name of the dealer, the
serial number and the year, month and date of
purchase are all completed or the original invoice
or the sales receipt (indicating the dealer’s
name, the date of purchase and product type) is
attached to this Guarantee Certi cate. Olympus
reserves the right to refuse free-of-charge service
if neither Guarantee Certi cate is completed
nor the above document is attached or if the
information contained in it is incomplete or
illegible.
2 Since this Guarantee Certi cate will not be re-
issued, keep it in a safe place.
* Please refer to the list on the web site: http://
www.olympus.com for the authorized international
Olympus service network.
Trademarks
IBM is a registered trademark of International
Business Machines Corporation.
Microsoft and Windows are registered trademarks
of Microsoft Corporation.
Macintosh is a trademark of Apple Inc.
xD-Picture Card™ is a trademark.
microSD is a trademark of the SD Association.
All other company and product names are
registered trademarks and/or trademarks of their
respective owners.
The standards for camera le systems referred to
in this manual are the “Design rule for Camera File
system/DCF” standards stipulated by the Japan
Electronics and Information Technology Industries
Association (JEITA).
58
EN
SPECIFICATIONS
Camera
Product type : Digital camera (for shooting and displaying)
Recording system
Still pictures : Digital recording, JPEG (in accordance with Design rule for Camera File
system (DCF))
Applicable standards : Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching III,
PictBridge
Sound with still pictures
: Wave format
Movie : AVI Motion JPEG
Memory : Internal memory
xD-Picture Card (16 MB to 2 GB) (TypeH/M/M+, Standard)
microSD card/microSDHC card (when the supplied microSD Attachment
is used.)
No. of effective pixels : 11,860,000 pixels
Image pickup device : 1/2.33” CCD (primary color lter), 12,700,000 pixels (gross)
Lens : Olympus lens 6.3 to 31.5 mm, f3.5 to 5.6
(equivalent to 36 to 180 mm on a 35 mm camera)
Photometric system : Digital ESP metering system
Shutter speed : 4 to 1/2000 sec.
Shooting range :
0.6 m (2.0 ft.) to
(W), 1.0 m (3.3 ft.) to (T) (normal)
0.2 m (0.7 ft.) to (W), 0.6 m (2.0 ft.) to
(T) (macro mode)
0.03 m (0.1 ft.) to (super macro mode)
Monitor : 2.7” TFT color LCD display, 230,000 dots
Connector : Multi-connector (USB connector, A/V OUT jack)
Automatic calendar system : 2000 up to 2099
Operating environment
Temperature : 0 °C to 40 °C (32 °F to 104 °F) (operation) /
-20 °C to 60 °C (-4 °F to 140 °F) (storage)
Humidity : 30 % to 90 % (operation)/10 % to 90 % (storage)
Power supply : AA alkaline / NiMH battery (two)
Dimensions : 98.0 mm (W) × 61.6 mm (H) × 27.8 mm (D)
(3.9 × 2.4 × 1.1 in.) (excluding protrusions)
Weight : 128 g (4.5 oz) (excluding batteries and card)
microSD Attachment
Product type : Attachment for microSD card
Operating environment
Temperature : -10 °C to 40 °C (14 °F to 104 °F) (operation) /
-20 °C to 65 °C (-4 °F to 149 °F) (storage)
Humidity : 95 % and below (operation) / 85 % and below (storage)
Dimensions : 25.0 mm (W) × 20.3 mm (H) × 1.7 mm (D) (1.0 × 0.8 × 0.07 in.) (Handle:2.2 mm
(0.09 in.))
Weight : Approx. 0.9 g (0.03 oz)
Design and speci cations subject to change without notice.
59
EN
Index
ERASE
K
ALL ERASE .......................................29
SEL. IMAGE ......................................29
Single image erase ............................16
Error message ......................................42
F
FACE DETECT .....................................26
Flash
FILL IN ...............................................19
FLASH AUTO ....................................19
FLASH OFF .......................................19
REDEYE ............................................ 19
FORMAT ...............................................30
Frame rate ............................................24
FUNC menu ..........................................22
I
G
mode ............................................. 17
iESP ......................................................26
IMAGE QUALITY A ..............................24
Image size ............................................24
Information display..........................22, 23
Internal memory ........................ 11, 46, 47
ISO sensitivity .......................................25
M
Macro & ...............................................20
MAGIC FILTER Q ................................27
Maintenance
Camera care ......................................45
PIXEL MAPPING ...............................30
MEMORY FORMAT ..............................30
MENU COLOR .....................................31
microSD Attachment ....................... 11, 48
N
Natural color .........................................25
A
AF MODE .............................................26
AF TRACKING ................................18, 26
Arrow pad .............................................12
AV cable ................................................32
B
Backlight boost .....................................21
BACKUP ............................................... 30
Battery ...........................................10, 45
BATTERY TYPE ...................................33
Beep .....................................................31
Brightness
Backlight boost ..................................21
Exposure compensation ....................20
Monitor brightness s .......................31
C
Card
microSD Card .............................. 11, 48
microSDHC card .......................... 11, 48
xD-Picture Card ...........................10, 46
Compression.........................................24
Connecting
PC ......................................................39
Printer ................................................34
TV ......................................................32
CUSTOM PRINT ..................................35
D
Date and time X ........................... 12, 31
DIS MODE h .....................................18
Display language W ..................13, 30
E
EASY PRINT ........................................34
Edit (still images)
Cropping P .......................................28
Resize Q .........................................28
60
EN
O
OLYMPUS Master 2 .............................39
Operation guide ....................................12
P
PANORAMA ..........................................26
PERFECT FIX
H
..................................28
PictBridge .............................................34
Playback image
Closeup view .....................................23
Index view ..........................................23
Movies ...............................................15
On TV ................................................32
Viewing images ..................................15
P mode .................................................14
POWER SAVE ......................................33
Print ......................................................34
Print Reservations (DPOF) ...................37
Protecting images 0 .......................... 28
R
RESET D ..............................................27
Rotating images y ...............................29
S
s
mode ...........................................17
Self-timer ..............................................21
Shooting................................................14
Shooting movies n .............................. 18
SILENT MODE F .................................33
SLIDESHOW G ....................................28
Sound recording R ..........................25, 29
SPOT .................................................... 26
Strap .....................................................10
SUPER MACRO % ..............................20
SWITCH SHOOTING MODES C ....... 27
T
Turning on the camera ..........................12
K/q ...............................................31
U
USB cable .......................................34, 39
Using the Menu.......................................3
V
VIDEO OUT ..........................................32
W
WB ........................................................ 25
Z
Zoom.....................................................19
VN389701
51

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Olympus X-41 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Olympus X-41 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Olympus X-41

Olympus X-41 Gebruiksaanwijzing - Nederlands - 61 pagina's

Olympus X-41 Gebruiksaanwijzing - Deutsch - 58 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info