574596

Olympus VN-2100PC Handleiding

2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
BZ8174-02-INST-E1 2006.06.30
-
6
--
7
--
8
--
9
--
10
-
Erase
1
Press the FOLDER button
to select folder.
2
Press the 9 or 0
button to select the file to
be erased.
3
Press the ERASE button.
4
Press the 9 or 0
button to select the “YES”.
5
Press the PLAY button.
4
Erasing
You can easily erase unnecessary files. Sequential file numbers are reassigned automatically.
Erasing One File at a Time
Erase All Files from a Folder
Other Functions
s The recording time shown above is for one continuous file. The available recording time may be shorter
than specified if several files are recorded. (Use the remaining time and recorded time only as references.)
4
Recording Modes (XHQ HQ SP LP)
The recording mode can be chosen from XHQ (extra high quality
sound recording) and HQ (high quality sound recording), SP
(standard recording), and LP (long-term recording).
In Menu mode selection... XHQ, HQ, SP, LP
Notes
s An erased file cannot be restored.
s If operation is not executed for 8 seconds during the setting, it will return to the stop
status.
s Completion of erasing may take several seconds.
Do not attempt to remove, replace battery or attempt any other functions on the voice
recorder during this period because
data may be corrupted.
1
Press and hold the MENU
button for 1 second or longer
while the recorder is stopped.
2
Press the + or – button to
select what you would like to
set up.
The selected menu item flashes.
3
Use the 9 or 0 button
to change the setting.
4
Press the PLAY button to
confirm the setting.
5
Press the STOP button to
close the menu.
4
Basic Operation of the Menu Mode
Using the menu function, you can change various settings according to your preference.
Menu
4
Using The Variable Control Voice Actuator (VCVA)
When the microphone senses that sounds has reached a preset volume,
the built-in Variable Control Voice Actuator (VCVA) starts recording
automatically, and stops it when the volume drops.
Particularly helpful for extended recording, the VCVA not only conserves
memory by turning off recording during silent periods, but also makes
playback more efficient and convenient.
In Menu mode selection... On, OFF
s During recording, use the + and – buttons to adjust the VCVA level in 15 levels.
s The Record/play indicator light is lit during recording. When the recorder is in
Standby mode, the Record/play indicator light flashes and “VCVA” flashes on
the display.
4
Index Marks
Index marks can be placed in a file during recording or playback to
provide and quick and easy way of keeping track of important sections
in the file.
1 Press the INDEX button during recording (pause recording)
or playback to set an index mark.
An index number appears on the display.
Clearing an Index Mark
Press the ERASE button while the index number appears on the display.
s Up to 10 index marks can be set in a file.
s Sequential index marks numbers are reassigned automatically.
4
Microphone Sensitivity (HI LOW)
Microphone sensitivity is adjustable to meet your recording needs.
In Menu mode selection... HI, LOW
HI: High-sensitivity mode that records sounds in all directions.
LOW: Low-sensitivity mode suited for dictation.
s To ensure successful recording, make a test recording to choose appropriate
microphone sensitivity before recording.
s If you choose “HI”, we recommend setting the recording mode to XHQ or HQ to
best take advantage of the higher sensitivity.
s
If you choose “HI”, background noise may be high depending on the recording conditions.
4
Timer Recording (TIMER)
(Excluded VN-1100/VN-1100PC)
You can schedule for automatic recording, specifying the start time
and end time of recording. When the timer-controlled recording
completes, the setting is released.
In Menu mode selection... SET, On, OFF→After selecting SET, press
the PLAY button to set the time.
4
System Sounds (BEEP)
The recorder beeps to alert you to button operations or warn you of
errors. System sounds may be turned off.
In Menu mode selection... On, OFF
s
If the alarm playback function has been set, the alarm will sound at the scheduled
time even if the system sounds are disabled (Excluded VN-1100/VN-1100PC).
Batteries
Warning
• Batteries should never be exposed to flame, heated, short-circuited or disassembled.
• Do not attempt to recharge alkaline, lithium or any other non-rechargeable batteries.
• Never use any battery with a torn or cracked outer cover.
• Keep batteries out of the reach of children.
• If you notice anything unusual when using this product such as abnormal noise, heat,
smoke, or a burning odor:
1 remove the batteries immediately while being careful not to burn yourself, and;
2 call your dealer or local Olympus representative for servicing.
Troubleshooting
Q1 Nothing happens when a button is pressed.
A1 • The HOLD switch may be set to HOLD.
• The batteries may be depleted.
• The batteries may be inserted incorrectly.
Q2 No sound or quiet sound is heard from the speaker while playing back.
A2 • The earphone plug may be plugged into the recorder.
• The volume may be set to the minimum level.
Q3 Recording is not possible.
A3 By pressing the STOP button repeatedly while the recorder stops, check if the
display shows:
•
The remaining recording time in the selected folder may have reached“00:00”.
• The number of files is 100.
Check if the display shows “FULL” by pressing the REC button.
Q4 The playback speed is too fast (slow).
A4 The recorder may be set to Fast (slow) Playback.
Specifications
Recording medium: Built-in flash memory
Overall frequency response: XHQ mode 300 to 7,200 Hz
HQ mode 300 to 7,200 Hz
SQ mode 300 to 5,400 Hz
LP mode 300 to 3,100 Hz
Recording time: VN-3100/VN-3100PC: 128 MB
XHQ mode: Approx. 5 hours 40 minutes
HQ mode: Approx. 11 hours 40 minutes
SP mode: Approx. 23 hours 30 minutes
LP mode: Approx. 71 hours 40 minutes
VN-2100/VN-2100PC: 64 MB
XHQ mode: Approx. 2 hours 50 minutes
HQ mode: Approx. 5 hours 50 minutes
SP mode: Approx. 11 hours 40 minutes
LP mode: Approx. 35 hours 50 minutes
VN-1100/VN-1100PC: 32 MB
XHQ mode: Approx. 1 hour 25 minutes
HQ mode: Approx. 2 hours 50 minutes
SP mode: Approx. 5 hours 50 minutes
LP mode: Approx. 17 hours 50 minutes
Microphone: Electret Condenser Microphone (monaural)
Speaker: Built-in ø 28 mm round dynamic speaker
Maximum power: 120 mW
Earphone jack (monaural): ø 3.5 mm diameter, impedance 8 Ω
Microphone jack(monaural): ø 3.5 mm diameter, impedance 2 kΩ
Power supply: Two AAA (LR03 or R03) batteries or
Two Ni-MH rechargeable batteries
Continuous battery use time:
Alkaline batteries. 25 hours
Ni-MH rechargeable batteries: Approx. 15 hours
Dimensions: 102(L) × 39 (W) × 19.5 (T) mm
Weight: 63 g (including battery)
*
Battery life is measured by Olympus. It varies greatly according to the type of batteries
used and the conditions of use.
*
Your recorded contents are for your personal use or pleasure only. It is prohibited to record
copyrighted material without permission of the copyright holders according to copyright law.
* Specifications and design are subject to change without notice for improvement of performance.
Accessories (Optional)
Ni-MH Rechargeable Battery Charger: BU-400 (Europe only)
Ni-MH Rechargeable Battery: BR401
Connecting cord (Earphone jack ↔ Microphone jack): KA333
Noise-Cancellation microphone: ME52
Electret condenser microphone: ME15
Dual monaural earphone: E20
Telephone pickup: TP7
Neck Strap: ST26
General Precautions
Read this manual carefully to ensure that you know how to operate it safely and correctly.
Keep this manual in an easily accessible location for future reference.
• The warning symbols indicate important safety related information. To protect yourself and oth-
ers from personal injury or damage to property, it is essential that you always read the warnings
and information provided.
Warning regarding data loss
Recorded content in memory may be destroyed or erased by operating mistakes, unit malfunction,
or during repair work. For important recorded content, we recommend you to write it down some-
where (for VN-1100/VN-2100/VN-3100) or make a back-up by downloading to a PC (for VN-1100PC/
VN-2100PC/VN-3100PC).
Any liability for passive damages or damage of any kind occurred due to data loss incurred by a
defect of the product, repair performed by the third party other than Olympus or an Olympus autho-
rized service station, or any other reasons is excluded from the Olympus’s liability.
1
Press the FOLDER button
to select folder.
2
Press the ERASE button
twice.
3
Press the 9 or 0
button to select the “YES”.
4
Press the PLAY button.
Menu setting screen
Move the selection one position
up/increase the number.
Move the selection one position
down/decrease the number.
Move the selection
one position
to the left.
Move the selection
one position
to the right.
Confirm the setting
Notes
s The recorder will stop if you leave it idle for 3 minutes during a menu setup operation,
when a selected item is not applied.
s If you press the STOP button during a menu setup operation, the recorder will stop and
apply the items that were set to that point.
4
Alarm Playback Function ( )
(Excluded VN-1100/VN-1100PC)
You can use the alarm playback function to sound the alarm tone for 5
minutes at the scheduled time. Within this 5 minutes, pressing any button
other than the HOLD switch starts the recorder to play back the pre-
selected file.
In Menu mode selection... SET, On, OFF→After selecting SET, press
the PLAY button to set the time.
With the alarm playback function, only one file can be played back.
Select a file for the function before setting the time.
To cancel an alarm playback
For in the menu mode, select OFF and press the PLAY button.
s Regardless of the selected folder, once the alarm playback is set, it operates every day unless the
setting is canceled.
s To view the current setting, select On, and then press the PLAY button.
s The alarm tone stops automatically if no button is pressed within 5 minutes after the alarm starts. The
file is not played back in this case.
s If the recorder has no recorded file in the selected folder, the alarm playback function is not available.
s Alarm playback occurs every day unless it is set to OFF.
To cancel the timer setting
For the timer in the menu mode, select OFF, and then press the PLAY button.
s To view the current setting, select On, and then press the PLAY button.
s With this function, you can set only the start and the end time of recording. The current settings of the
recording mode, microphone sensitivity, VCVA and folder are applied for the settings before you set
timer-controlled recording.
s The setting exceeding the remaining recording time is not allowed.
s You can record at any time even it is not within the specified recording duration. However, if that makes
the remaining recording time insufficient for the timer-controlled recording, the recording will not complete.
s If any operation is ongoing, the timer-controlled recording is overridden.
4
Moving File Between Folders
(Excluded VN-1100/VN-1100PC)
You can move files recorded in folders A, B, C and D to other folders.
The moved file is added at to the end of the destination folder.
1 Choose the file you want to transfer and press the PLAY button
to play it.
2 Press and hold the MENU button for 1 second or longer
while the file is playing.
3 Press the 9 or 0 button to choose a destination folder.
4 Press the PLAY button.
The destination folder and the number of the moved file appear
on the display, and moving is completed.
s
If the destination folder is full (100 files), “FULL” appears on the display, and you
cannot move the file to that folder.
4
Resetting the Recorder (CLEAR)
This function resets the current time and other settings to their initial
status. It is useful if you are having problems with the recorder, or if you
want to erase the entire memory of the recorder.
1 Hold the STOP button, and hold the ERASE button for 3
seconds or longer.
2 Press the 9 or 0 button to select the “YES”.
3 Press the PLAY button.
s
If you leave the recorder untouched for 8 seconds or longer before you press the PLAY button in Step 3,
Clear mode will be canceled, and the recorder will enter Stop mode.
For safe And Correct Usage
• Do not leave the recorder in hot, humid locations such as inside a closed automobile
under direct sunlight or on the beach in the summer.
• Do not store the recorder in places exposed to excessive moisture or dust.
• Do not use organic solvents such as alcohol and lacquer thinner to clean the unit.
• Do not place the recorder on top of or near electric appliances such as TVs or refrigerators.
•Avoid sand or dirt. These can cause irreparable damage.
•Avoid strong vibrations or shocks.
• Do not disassemble, repair or modify the unit yourself.
• Do not operate the unit while operating a vehicle (such as a bicycle, motorcycle, or go-cart).
• Keep the unit out of the reach of children.
File to be erased
Folder to be erased
Microphone
sensitivity display
VCVA indicator
Alarm indicator
a
b
a Destination folder
b Destination
number of the file
XHQ HQ SP LP
Model
Mode
Approx.1 hour 25 minutes Approx.2 hours 50 minutes
Approx.5 hours 50 minutes
Approx.17 hours 50 minutes
Approx.35 hours 50 minutes
Approx.11 hours 40 minutes
Approx.5 hours 50 minutes
VN-1100/
VN-1100PC
VN-2100/
VN-2100PC
Approx.2 hours 50 minutes
Current recording
mode
Approx.71 hours 40 minutes
Approx.23 hours 30 minutes
Approx.11 hours 40 minutes
VN-3100/
VN-3100PC
Approx.5 hours 40 minutes
2

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Olympus-VN-2100PC

Zoeken resetten

  • ik heb een digital voice recorder Olypus die werk niet op windows 10.
    Hoe kan ik dat oplosen Gesteld op 10-7-2017 om 20:41

    Reageer op deze vraag Misbruik melden

    • Een opgeslagen exe-file hielp mij uit dit probleem. Het werkt óók met Windows10 !
      Met deze digital voice recorder (DVR) heb je drie files nodig:
      - DWPUP5EN.exe (digital wave player engelse versie), de executable
      - een handleiding (PDF-formaat): VN4100_VN-4100PC_VN-3100_VN-
      3100PC_VN-2100_VN-2100PC_VN-1100_VN-1100PC_Instructions_EN.pdf
      - eventueel een VNSeries64Driver,exe. Geef uw email-adres op en ik verstuur
      het alle drie. Mijn E-adres: frans.m.ros@hccnet.nl Geantwoord op 23-10-2017 om 15:34

      Waardeer dit antwoord (5) Misbruik melden

  • Een opgeslagen exe-file hielp mij uit dit probleem. Het werkt óók met Windows10 !
    Met deze digital voice recorder (DVR) heb je drie files nodig:
    - DWPUP5EN.exe (digital wave player engelse versie), de executable
    - een handleiding (PDF-formaat): VN4100_VN-4100PC_VN-3100_VN-
    3100PC_VN-2100_VN-2100PC_VN-1100_VN-1100PC_Instructions_EN.pdf
    - eventueel een VNSeries64Driver,exe. Geef uw email-adres op en ik verstuur
    het alle drie. Mijn E-adres: frans.m.ros@hccnet.nl Geantwoord op 23-10-2017 om 15:35

    Waardeer dit antwoord Misbruik melden

  • Ook ik heb een Olympus DVC (VN-2100PC) en krijg de bestanden niet op mijn pc. Ik gebruik Windos 8.1 op mijn computer. Kunt u mij ook de benodigde files toesturen? Mijn e-mailadres is adsebille@gmail.com Geantwoord op 18-9-2020 om 11:28

    Waardeer dit antwoord (1) Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Olympus VN-2100PC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Olympus VN-2100PC in de taal/talen: Engels als bijlage per email.

De handleiding is 0,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info