471061
8
Verklein
Vergroot
Pagina terug
1/127
Pagina verder
Basic guide
Quick task index
Table of Contents
1.
Basic photography/frequently-
used options
2. Other shooting options
3. Flash shooting
4. Shooting and viewing movies
5. Playback options
6. Sending and receiving images
7. Using OLYMPUS Viewer 2/[ib]
8. Printing pictures
9. Camera setup
10. Customizing camera settings
11. Information
12. SAFETY PRECAUTIONS
System chart
Index
Thank you for purchasing an Olympus digital camera. Before you start to use your new
camera, please read these instructions carefully to enjoy optimum performance and a longer
service life. Keep this manual in a safe place for future reference.
We recommend that you take test shots to get accustomed to your camera before taking
important photographs.
The screen and camera illustrations shown in this manual were produced during the
development stages and may differ from the actual product.
The contents in this manual are based on rmware version 1.0 for this camera. If there
are additions and/or modi cations of functions due to rmware update for the camera, the
contents will differ. For the latest information, please visit the Olympus website.
Instruction Manual
DIGITAL CAMERA
2
EN
Unpack the box contents
The following items are included with the camera.
If anything is missing or damaged, contact the dealer from whom you purchased the
camera.
Camera
Computer software
CD-ROM
Instruction manual
Warranty card
Body cap Strap USB cable
CB-USB6
AV cable
(Monaural)
CB-AVC3
Camera
grip
MCG-1
Lithium ion
battery
PS-BLS1 (BLS-1)
or BLS-5
Lithium ion
charger
PS-BCS1 (BCS-1)
or BCS-5
Attaching the strap
1
Thread the strap in
the direction of the
arrows.
2
Lastly, pull the strap
tight making sure
that it is fastened
securely.
1
2
3
Attach the other end of the strap to the other eyelet
in the same way.
Attaching the grip
Use a coin or similar object
to tighten the screw.
2
1
Indications used in this manual
The following symbols are used throughout this manual.
#
Cautions
Important information on factors which may lead to a malfunction
or operational problems. Also warns of operations that should be
absolutely avoided.
$
Notes
Points to note when using the camera.
%
Tips
Useful information and hints that will help you get the most out of
your camera.
g
Reference pages describing details or related information.
3
EN
Preparations for shooting
Basic guide
1
Charging the battery.
Charging indicator
BCS-1 BCS-5
Charging in
progress
Lights orange
Charging
complete
Lights
blue
Off
Charging error
Blinks orange
(Charging time: Up to approximately
3 hours 30 minutes)
# Cautions
1
2
3
AC wall
outlet
Lithium ion
charger
SDirection indicating mark
Lithium ion battery
AC cable
Charging
indicator
Unplug the charger when charging is complete.
Use only compatible battery chargers to charge rechargeable batteries. BLS-1
batteries must be charged using the BCS-1, BLS-5 batteries using the BCS-5.
2
Loading the battery.
2
1
3
Direction
indicating
mark
Battery/card
compartment cover
Battery/card
compartment lock
Removing the battery
Turn off the camera before opening or closing the
battery/card compartment cover.
To remove the battery, rst push the battery lock
knob in the direction of the arrow and then remove.
# Cautions
Contact an authorized distributor or service center if you are unable to remove the
battery. Do not use force.
$ Notes
It is recommended to set aside a backup battery for prolonged shooting in case the
battery in use drains.
Charging and inserting the battery
4
EN
Basic guide
Preparations for shooting
1
Loading the card.
Insert the SD/SDHC/SDXC/Eye-Fi card
(referred to as “card” in these instructions)
until it locks in place.
g “Card basics” (P. 99)
# Cautions
Turn off the camera before loading or
removing the card.
Removing the card
Press the inserted card lightly and it will be ejected.
Pull out the card.
# Cautions
Do not remove the battery or card while the card
access lamp (P. 9) is lit.
2
Closing the battery/card compartment cover.
Close the cover until you hear a click.
# Cautions
Close the battery/card compartment cover when using the camera.
Inserting and removing cards
5
EN
Preparations for shooting
Basic guide
Attaching a lens to the camera
1
Remove the body cap from the camera and the rear cap from the lens.
1
2
1
2
2
Attach a lens to the camera.
# Cautions
Make sure the camera is turned off.
Do not press the lens release button.
Do not touch internal portions of the
camera.
Alignment
mark
Lens
attachment
mark
Align the lens attachment mark (red) on the camera
with the alignment mark (red) on the lens, then
insert the lens into the camera’s body.
Rotate the lens in the direction indicated by the
arrow until you hear it click.
3
Remove the lens cap.
2
1
1
Removing the lens from the camera
While pressing the lens release button, rotate the lens in
the direction of the arrow.
g “Interchangeable lenses” (P. 100)
2
1
Lens release button
6
EN
Basic guide
Preparations for shooting
1
Press the ON/OFF button to turn on the camera.
When the camera is turned on, the (blue) power lamp will light and the monitor will
turn on.
When the camera is turned on, dust reduction will be performed to remove dust from
the surface of the image sensor lter.
To turn off the power, press the ON/OFF button again.
2
Set the mode dial to A.
Mode dial
ON/OFF button
Monitor
250250 F5.6
01:02:0301:02:03
3838
L
N
ISO-A
200
HD
Battery level
7 (green): Camera ready to shoot.
Displayed for about 10 seconds
after the camera is turned on.
8 (green): Low battery
9 (blinks red): Charge the battery
Number of storable still pictures
Available recording time
Power on
7
EN
Preparations for shooting
Basic guide
Setting the date/time
Date and time information is recorded on the card together with the images. The le
name is also included with the date and time information. Be sure to set the correct
date and time before using the camera.
1
Display the menus.
Press the MENU button to display the menus.
MENU button
j
4:3
D
2
1
Shooting Menu 1
Card Setup
Reset/Myset
Picture Mode
Image Aspect
Back
Set
2
Select [X] in the [d] (setup) tab.
Use FG to select [d] and press I.
Select [X] and press I.
--.--.-- --:--X
W
j
±0
k
±0
2
1
Setup Menu
English
5sec
c
/
#
Menu Display
Firmware
Rec View
Back
Set
[d] tab
3
Set the date and time.
Use HI to select items.
Use FG to change the selected item.
Use FG to select the date format.
X
2011
YMDTime
Cancel
Y/M/D
The time is displayed
using a 24-hour clock.
4
Save settings and exit.
Press Q to set the camera clock and exit to the main menu.
Press the MENU button to exit the menus.
8
EN
Basic guide
Names of parts and functions
Camera
1
2
3
5
4
6
8
7
c
0
b
a
5
9
g
d
e
f
h
i
1 Mode dial ....................................P. 6, 10
2 Shutter button ...............P. 11, 12, 36, 92
3 ON/OFF button ................................P. 6
4 Fn2 button ......................................P. 89
5 Strap eyelet.......................................P. 2
6 Self-timer lamp/AF illuminator
...............................................P. 49/P. 82
7 Lens attachment mark ......................P. 5
8 Mount (Remove the body cap before
attaching the lens.)
9 Stereo microphone ...................P. 62, 68
0 Hot shoe cover
a Built-in ash ....................................P. 59
b Lens release button ..........................P. 5
c Lens lock pin
d Tripod socket
e Battery/card compartment cover.......P. 3
f Battery/card compartment lock .........P. 3
g Connector cover
h Multi-connector ...................P. 69, 73, 77
i HDMI mini-connector (type C) ........P. 69
Names of parts
9
EN
Names of parts and functions
Basic guide
1
3
2
45678 90
a
b
e
d
c
f
F (Up) / F (Exposure compensation)
button (P. 40)
I (Right) /# (Flash)
button (P. 59)
G (Down) / jY
(Sequential shooting/Self-timer)
button (P. 49)
H (Left) / P (AF
target) button (P. 37)
Q button
(P. 20, 21)
Main dial* (j)
(P. 14, 50 53)
Rotate to choose an
option.
1 Flash switch ....................................P. 59
2 Accessory port ................................P. 71
3 Monitor (Touch screen) .......P. 22, 24, 25
4 R (Movie) button....P. 11, 13, 61, 65, 89
5 U button .......................P. 33, 38, 63, 64
6 Fn1/G button .................P. 89/P. 63, 64
7 q (Playback) button ................P. 14, 63
8 D (Erase) button ......................P. 15, 63
9 MENU button .................................P. 21
0 Card access lamp .............................P. 4
a Hot shoe .........................................P. 60
b INFO (Information display) button
.....................................P. 24, 25, 32 34
c Speaker
d Sub dial* (j) ...................P. 14, 50 53
e Grip attachment screw ......................P. 2
f Arrow pad
Main dial* (j) ..................P. 14, 50 53
In this manual, the j and j icons represent operations performed using the main and
sub dials.
*
10
EN
Basic guide
Names of parts and functions
Camera controls
Mode dial
Use the mode dial to select the shooting mode. After choosing the shooting mode, use
the shutter button to take photographs and the R button to shoot movies.
Movie mode
n
Movie (P. 61)
Mode iconIndicator
Advanced shooting modes
P
Program shooting (P. 50)
A
Aperture priority shooting
(P. 51)
S
Shutter priority shooting
(P. 52)
M
Manual shooting (P. 53)
For more advanced shooting and
greater creative control, you can
set the aperture value and shutter
speed.
The settings made in the advanced
shooting modes are retained even if
the camera is turned off.
Photo zone
Movie zone
Easy shooting modes
A
iAUTO (P. 18)
If A is selected, the camera automatically
optimizes settings to suit the subject.
Select ART or SCN options according to your
subject or creative intent. The camera optimizes
settings automatically.
When rotating the mode dial or turning off the
power in the easy shooting modes, functions with
changes made to their settings are restored to the
factory default settings.
ART Art lter (P. 16)
SCN Scene (P. 17)
% Tips
Resetting camera settings: g “Restoring default or custom settings” (P. 35)
11
EN
Names of parts and functions
Basic guide
Shutter button
R button
Mode Photos: shutter button Movies: R button
P
Aperture and shutter speed are
automatically adjusted for optimal
results.
The camera automatically adjusts
settings and records a movie.
A
You control aperture.
S
You control shutter speed.
M
You control aperture and shutter
speed.
A
A full auto mode in which the camera
automatically optimizes settings for
the current scene.
ART Select an art lter.
SCN Select a scene.
n
Photographs are recorded at the
settings selected in [nMode].
Adjust shutter speed or aperture for
different effects while shooting movies.
Taking photographs during movie recording
To take a photograph during movie recording, press the shutter button. Press the R
button to end recording. Three les will be recorded to the memory card: the movie
footage preceding the photograph, the photograph itself, and the movie footage following
the photograph.
Only one photograph can be taken at a time during movie recording; the self-timer and
ash can not be used.
# Cautions
Image size and quality for photographs are independent of movie frame size.
The autofocus and metering used in movie mode may differ from that used to take
photographs.
The R button can not be used to record movies in the following instances:
shutter button pressed halfway/BULB/Sequential shooting/PANORAMA/3D/
multiple exposure, etc. (still photography also ends)
12
EN
Basic guide
Basic operations
1
Frame the shot.
Be careful that your ngers
or the camera strap do not
obstruct the lens or ash.
Horizontal grip Vertical grip
Using lenses with an UNLOCK switch
Retractable lenses with an UNLOCK switch can not
be used while retracted.
Turn the zoom ring in the direction of arrow (
1
) to
extend the lens (
2
).
To store, turn the zoom ring in the direction of arrow
(
4
) while sliding the UNLOCK switch (
3
).
4
1
2
3
2
Adjust the focus.
Lightly press the shutter button down to the rst position (press the shutter button
halfway).
Press the shutter
button halfway.
250250 F5.6
01:02:0301:02:03
3838
L
N
ISO-A
200
HD
Shutter speed Aperture value
AF con rmation mark
AF target
The AF con rmation mark (( or n) will be displayed and focus will lock.
(
Lenses that supports Hi-Speed Imager AF*
n
Lenses with other Four Thirds mounts
Visit our website for more information.*
The shutter speed and aperture value that have been set automatically by the
camera are displayed.
Taking photographs/shooting movies
13
EN
Basic operations
Basic guide
Pressing the shutter button halfway and all the way down
The shutter button has two positions. The act of lightly pressing the shutter button to the
rst position and holding it there is called “pressing the shutter button halfway,” that of
pressing it all the way down to the second position “pressing the shutter button all (or the
rest of) the way down.”
Press halfway
Press the rest of
the way down
3
Release the shutter.
Taking photographs
Press the shutter button all the way (fully).
The shutter sounds and the picture is
taken.
Press halfway
Press the rest of
the way down
Recording movies
Release the shutter button and press the R button to begin recording.
Press the R button again to end recording.
R button
00:02:18
n
% Tips
If no operations are performed for a minute, the camera enters “sleep” (stand-by) mode
to turn off the monitor and to cancel all actions. The camera activates again when you
touch any button (the shutter button, q button, etc.). [Sleep]: g “Customizing camera
settings” (P. 81)
# Cautions
If the camera is used for extended periods, the temperature of the image pickup
device will rise and noise and colored fog may appear in images recorded at high ISO
sensitivities. Choose a lower ISO sensitivity or turn the camera off for a short period.
14
EN
Basic guide
Basic operations
Playback/Erasing
Viewing Images
Single-frame playback
Press the q button to display your most recent photograph
or movie.
2011.05.01 12:30 20
100-0020
L
N
Still image
2011.05.01 12:30 4
100-0004
WB
AUTO
WBWBWB
AUTOAUTOAUTO
P
HD
Movie
q button
Arrow pad/Main dial
Displays the
previous
frame
Displays the
next frame
Close-up playback
Rotate the sub dial r to zoom the
current image in up to 14×. Rotate
the dial q to return to single-frame
playback.
2x
Index display/Calendar display
Rotate the sub dial q to view multiple images (Index playback). After the dial is rotated
several times, images will be displayed in Calendar playback.
Press the U button to view the currently selected picture full frame.
2011.05.01 12:30 21
Index display
2011.5
Sun Mon Tue Wed Thu Fri Sat
25 26 27 28 29 30 1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30 31 1 2 3
25 26 27 28 29 30 1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30 31 1 2 3
Calendar display
Movie playback
Select a movie and press Q to display the playback
menu. Select [Movie Play] and press Q to begin playback.
To interrupt movie playback, press MENU.
m
Movie
Back
Movie Play
Erase
Set
15
EN
Basic operations
Basic guide
Volume
Volume can be adjusted by pressing F or G during
single-frame and movie playback.
00:00:02/00:00:14
Erasing images
Display an image you want to delete and press D. Select [Yes] and press Q.
You can also select multiple images for deletion. g “Selecting images” (P. 65)
D button
Erase
Back
Yes
No
Set
Protecting images
Protect images from accidental deletion. Display an image
you wish to protect and press the Fn2 button; a 0
(protect) icon will appear on the image. Press the Fn2
button again to remove protection.
You can also protect multiple selected images.
g “Selecting images” (P. 65)
# Cautions
Formatting the card erases all images even if they have
been protected.
2011.05.01 12:30 20
100-0020
L
N
4
:
3
16
EN
Basic guide
Basic operations
1
Rotate the mode dial to ART.
A menu of art lters will be displayed. Select a lter using FG.
ART 1
1
7
Pop Art
Exit
Set
Q
L
N
01:02:0301:02:03
10231023
250250 F5.6
0.00.0
ISO
400
HD
Press Q or press the shutter button halfway to display the view through the lens in
the monitor. Press Q to return to the art lter menu.
Types of art lters
j Pop Art o Pin Hole
k Soft Focus s Diorama
l Pale&Light Color t Cross Process
m Light Tone u Gentle Sepia
n Grainy Film v Dramatic Tone
2
Shoot.
To choose a different setting, press Q to display the art lter menu.
Art effects
Art lters can be modi ed and effects can be added. Pressing I in the art lter menu
displays additional options.
Modifying lters
Option I is the original lter, while options II and on add effects that modify the original
lter.
Adding effects*
Soft focus, pin-hole, frames, white edges, starlight
The effects available vary with the selected lter.*
# Cautions
If [RAW] is currently selected for image quality, image quality will automatically be set to
[YN+RAW]. The art lter will be applied to the JPEG copy only.
Depending on the subject, tone transitions may be ragged, the effect may be less
noticeable, or the image may become more “grainy.”
Some effects may not be visible in live view or during movie recording.
Playback may differ according to the lters, effects, or movie quality settings applied.
Using art lters
17
EN
Basic operations
Basic guide
1
Rotate the mode dial to SCN.
A menu of scene menu will be displayed. Select a scene using FG.
SCN 1 Portrait
Exit
Set
Q
L
N
01:02:0301:02:03
10231023
250250 F5.6
ISO
400
HD
Press Q or press the shutter button halfway to display the view through the lens in
the monitor. Press Q to return to the scene menu.
Types of scene modes
O Portrait r Nature Macro
P e-Portrait Q Candle
L Landscape R Sunset
K Landscape+Portrait T Documents
J
Sport s Panorama (P. 54)
G Night Scene
(
Fireworks
U Night+Portrait g Beach & Snow
G
Children fn Fisheye Effect
H
High Key wn Wide-angle
I
Low Key mn Macro
q DIS Mode T 3D Photo
J
Macro
2
Shoot.
To choose a different setting, press Q to display the scene menu.
# Cautions
In [e-Portrait] mode, two images are recorded: an unmodi ed image and a second image
to which [e-Portrait] effects have been applied. The unmodi ed image is recorded using
the option currently selected for image quality, the modi ed copy at an image quality of
JPEG (X-quality (2560 × 1920)).
[n Fisheye Effect], [n Wide-angle], and [n Macro] are for use with optional converter
lenses.
Movies can not be recorded in [e-Portrait], [Panorama], or [3D Photo] mode.
Shooting in scene mode
18
EN
Basic guide
Basic operations
Using live guides
Live guides are available in iAUTO (A) mode. While iAUTO is a full auto mode, live
guides make it easy to access a variety of advanced photographic techniques.
Change Color Saturation
Cancel
Guide item
Q
0
Clear & Vivid
Flat & Muted
Cancel Set
Level bar/selection
Guide item Level bar/selection Affects
Change Color Saturation Clear & Vivid
Flat & Muted
Saturation, contrast,
gradation, etc.
Change Color Image Warm
Cool
Color temperature,
gradation, etc.
Change Brightness Bright
Dark
Exposure compensation,
gradation, etc.
Blur Background Blur
Sharp
Aperture, live preview,
etc.
Express Motions
Blurred
Motion*
Stop Motion
Shutter speed
(1/2 s – fastest speed),
frame rate, etc.
Shooting Tips
Tips For Child Photo
Tips For Pet Photo
Tips For Flower Photo
Tips For Cuisine Photo
Tips For Framing
Tips With Accessory
Monitor frame rate slows.*
19
EN
Basic operations
Basic guide
1
Set the mode dial to A.
2
After pressing Q to display the live guide, use
the FG buttons on the arrow pad to highlight
an item and press Q to select.
Change Color Saturation
Cancel
Guide item
3
Use FG on the arrow pad to choose the level.
If [Shooting Tips] is selected, highlight an item and
press Q to view a description.
Press the shutter button halfway to select.
The effect of the selected level is visible in the display.
If [Blur Background] or [Express Motions] is selected,
the display will return to normal, but the selected effect
will be visible in the nal photograph.
0
Clear & Vivid
Flat & Muted
Cancel Set
Level bar
4
Shoot.
Press the shutter button to shoot.
To clear the live guide from the display, press the MENU button.
# Cautions
If [RAW] is currently selected for image quality, image quality will automatically be set to
[YN+RAW].
Live guide settings are not applied to the RAW copy.
Pictures may appear grainy at some live guide setting levels.
Changes to live guide setting levels may not be visible in the monitor.
The ash can not be used with the live guide.
Changes to live guide options cancel previous changes.
Choosing live guide settings that exceed the limits of the camera exposure meters may
result in pictures that are over- or under-exposed.
In P, A, S, and M modes, live guides can be displayed by pressing the Fn1 button.
Pictures will be taken using live guide settings. [Button Function]: g “Customizing
camera settings” (P. 81)
20
EN
Basic guide
Basic operations
Using live control
The live control can be used to adjust settings in P, S, A, M, and n modes. Using
live control allows you to preview the effects of different settings in the monitor. A
custom setting is available that allows the live control to be used in other modes
(P. 81).
WB
AUTO
WBWBWB
AUTOAUTOAUTO
AUTOAUTO
L
F
IS OFFIS OFF
4:3
j
HD
WB
AUTO
WBWBWB
AUTOAUTOAUTO
P
WBWB
AUTOAUTO
WB Auto
Functions
Settings
Available settings
Image stabilizer ....................................P. 42
Picture mode
*1
......................................P. 45
Scene mode
*2
.......................................P. 17
Art lter mode
*2
.....................................P. 16
n mode
*3
.............................................P. 61
White balance .......................................P. 43
Sequential shooting/self-timer ..............P. 49
Aspect ratio
*1*2
.......................................P. 48
Record mode ........................................P. 47
Flash mode
*1*2
.......................................P. 59
Flash intensity control
*1*2
.......................P. 60
Metering mode
*1*2
..................................P. 41
AF mode ...............................................P. 36
ISO sensitivity .......................................P. 48
Face priority
*1*2
......................................P. 39
Movie sound record ..............................P. 62
*1 P, A, S and M modes only.
*2 ART and SCN only.
*3 n mode only.
1
Press Q to display the live control.
To hide the live control, press Q again.
2
Use the FGbuttons on the
arrow pad to select settings,
use HI to change the
selected setting, and press
Q.
The selected settings take effect
automatically if no operations are
performed for about 8 seconds.
WB
AUTO
WBWBWB
AUTOAUTOAUTO
AUTOAUTO
L
F
IS OFFIS OFF
4:3
j
HD
WB
AUTO
WBWBWB
AUTOAUTOAUTO
P
WBWB
AUTOAUTO
WB Auto
Cursor
Displays
the selected
function
name
Cursor
Arrow pad
Arrow
pad
# Cautions
Some items are not available in some shooting modes.
% Tips
For information on displaying or hiding the live control.
[KControl Settings]: g “Customizing camera settings” (P. 81)
21
EN
Basic operations
Basic guide
1
Press the MENU button to display the menus.
Menus
j
4:3
D
2
1
Shooting Menu 1
Card Setup
Reset/Myset
Picture Mode
Image Aspect
Back
Set
Press Q to
con rm the
setting
Operation
guide
Press the MENU
button to go back
one screen
Tab
W
Preliminary and basic shooting
options
X
Advanced shooting options
q
Playback and retouch options
c
Custom menu*
#
Accessory port menu*
d
Camera setup
(e.g., date and language)
Not displayed at default settings.*
2
Use FG to select a tab and press
Q
.
3
Select an item using FG and press
Q
to display options for the
selected item.
2
1
Off
w
0.0
oj/Y
Back
Shooting Menu 2
Image Stabilizer
Bracketing
Multiple Exposure
#
RC Mode
Digital Tele-converter
Off
Off
Off
Set
The current setting is displayedFunction
Q
2
1
Off
w
0.0
Back
Shooting Menu 2
Image Stabilizer
Bracketing
Multiple Exposure
#
RC Mode
Digital Tele-converter
j/Y
Off
Off
Off
Set
j
o
Y
12s
Y
2
s
4
Use FG to highlight an option and press Q to select.
Press the MENU button repeatedly to exit the menu.
$ Notes
For details on the functions that can be set with the menu, refer to “Menu directory”
(P. 107).
A guide is displayed for about 2 seconds after you select an option. Press the INFO
button to view or hide guides.
% Tips
Camera settings can be customized to your shooting style: Use the custom menus to
customize camera settings to your own goals or taste. Custom menus are not displayed
by default, and you will need to display the menus before proceeding. g “Customizing
camera settings” (P. 81)
Using accessory port devices: Settings for the EVF and OLYMPUS PENPAL accessories
are accessed from the accessory port menu. This menu is not displayed by default, and
you will need to display it before proceeding. g “Customizing camera settings” (P. 81)
Using the menus
22
EN
Basic guide
Basic operations
Using the Touch screen
The monitor acts as a touch screen to control the camera.
Live Guides
The touch screen can be used with live guides.
1
Touch the tab and swipe your nger to the
left to display live guides.
Tap to select items.
2
Use your nger to position the sliders.
Press the MENU button to exit the live guide
display.
Tab
250250 F5.6
01:02:0301:02:03
3838
L
N
ISO-A
200
HD
Shooting Mode
You can focus and shoot by tapping the monitor.
Tap to cycle through touch screen settings.
ISO
200
250250 F5.6
P
0.00.0
01:02:0301:02:03
3030
L
N
HD
Touch screen operations disabled.
Tap a subject to focus and automatically release
the shutter.
Tap to display a focus frame. You can use the
touch screen to choose the position and size of
the focus frame. Photographs can be taken by
pressing the shutter button.
Previewing Your Subject ( )
1
Tap the subject in the display.
An AF frame will be displayed.
Use the slider to choose the size of the frame.
1414
1010
7
7
5x
5x
ISO
200
250250 F5.6
P
0.00.0
2
Next, tap E to zoom in on the subject in
the focus frame.
Use your nger to scroll the display.
1x
23
EN
Basic operations
Basic guide
Playback Mode
Use the touch screen to page through images or zoom in and out.
Full-Frame Playback
Viewing Additional Images
Slide your nger to the left to view later frames, right to
scroll view earlier frames.
Playback Zoom
Slide the bar up or down to zoom in or out.
Use your nger to scroll the display when the picture is
zoomed in.
Tap F to display Index playback. For calendar
playback, tap F until the calendar is displayed.
Index/Calendar Playback
Page Ahead/Page Back
Slide your nger up to view the next page, down to view
the previous page.
Use t or u to choose the number of images
displayed.
For single-frame playback, tap u until the current
image is displayed full frame.
2011.05.01 12:30
Viewing Images
Tap an image to view it full frame.
# Cautions
The situations in which touch screen operations are not available include the following.
Movie recording/panorama/3D/e-portrait/multiple exposure/bulb photography/multi-view
display/one-touch white balance dialog/when buttons or dials are in use
In self-timer mode, the timer can be started by tapping the display. Tap again to stop the
timer.
Do not touch the display with your ngernails or other sharp objects.
Gloves or monitor covers may interfere with touch screen operation.
% Tips
Disabling the touch screen. [Touch Screen Settings]: g “Customizing camera settings”
(P. 81)
24
EN
Basic guide
Information displayed in the monitor
Shooting
250250 F5.6
ISO
400
L
N
1
ISIS
4:3
S-AFS-AF
AEL
FP RC
BKT
+
2.0
+
2.0
P
+7+7
01:02:0301:02:03
10231023
45
mm45 mm
-3-3
j
RR
+
2.0
+
2.0
HD
N
1
3
j
v
w
x
y
z
A
u
t
s
1
e
f
g
h
i
j
k
d
c
32 54 678 09
pronmql
ba
B
1 Card write indicator ...........................P. 8
2 Super FP ash s ........................P. 105
3 RC mode.........................................P. 93
4 Auto bracket t ............................P. 57
5 Multiple exposure a .....................P. 56
6 Face priority I .........................P. 39, 82
7 Movie sound ...................................P. 62
8 Internal temperature warning
m ...........................................P. 97
9 dLock ............................................P. 82
0 Focal length ..................................P. 100
a Flash ...............................................P. 59
(blinks: charging in progress,
lights up: charging completed)
b AF con rmation mark......................P. 12
c Image stabilizer...............................P. 42
d Art lter ...........................................P. 16
Scene mode....................................P. 17
Picture mode...................................P. 45
e White balance .................................P. 43
f Sequential shooting/self-timer ........P. 49
g Aspect ratio .....................................P. 48
h Record mode (still images) .............P. 47
i Record mode (movies) ...................P. 48
j Available recording time
k Number of storable still pictures ...P. 106
l Tone control ....................................P. 34
m Top: Flash intensity control ......P. 60
Bottom: Exposure compensation
indicator............................P. 40
n Exposure compensation value........P. 40
o Aperture value .........................P. 50 53
p Shutter speed ..........................P. 50 53
q Histogram .................................P. 32, 33
r AE Lock u ...................................P. 41
s Shooting mode...................P. 10, 50 55
t Myset ..............................................P. 35
u Touch screen mode ........................P. 22
v Flash intensity control .....................P. 60
w ISO sensitivity .................................P. 48
x AF mode .........................................P. 36
y Metering mode ................................P. 41
z Flash mode .....................................P. 59
A Battery check
7 Lit up (green) : Ready for use
(displayed for about ten seconds
after the camera is turned on)
8 Lit up (green) : Battery is running
low
9
Blinks (red) : Charging required
B Live guide recall ........................P. 18, 22
You can switch the monitor display using the INFO button.
g “Switching the information display” (P. 32)
Information displayed in the monitor
25
EN
Information displayed in the monitor
Basic guide
Playback
Simpli ed display
2011.05.01 12:30 15
100-0015
×10×10
4
:
3
L
N
3D3D
SD
c
7
8
2
1345 6
90ab
Overall display
F5.6F5.6
+1.0+1.0
G+4G+4A+4A+4
AdobeAdobe
NaturalNatural
ISO 400ISO 400
250250
+2.0+2.0 45mm45mm
1/84032×3024
×10×10
4
:
3
L
N
3D3D
2011.05.01 12:30 15
100-0015
WB
AUTO
P
SD
l
i
j
k
m
o
n
h
g
pqrs
t
ed f
1 Battery check ....................................P. 6
2 Eye-Fi upload complete ..................P. 88
3 Print reservation
Number of prints .............................P. 76
4 Sound record ..................................P. 68
5 Protect ............................................P. 15
6 Image selected ...............................P. 65
7 File number ...............................P. 76, 86
8 Frame number ................................P. 76
9 Storage device ................................P. 99
0 Record mode ..................................P. 47
a Aspect ratio ...............................P. 48, 67
b 3D image ........................................P. 55
c Date and time ...................................P. 7
d Aspect border .................................P. 48
e AF target .........................................P. 37
f Shooting mode...................P. 10, 50 53
g Exposure compensation .................P. 40
h Shutter speed ..........................P. 50 53
i Aperture value .........................P. 50 53
j Focal length ..................................P. 100
k Flash intensity control .....................P. 60
l White balance compensation..........P. 44
m Color space.....................................P. 85
n Picture mode...................................P. 45
o Compression rate ...........................P. 47
p Pixel count ......................................P. 47
q ISO sensitivity .................................P. 48
r White balance .................................P. 43
s Metering mode ................................P. 41
t Histogram .................................P. 32, 33
You can switch the monitor display using the INFO button.
g “Displaying information during playback” (P. 33)
26
EN
Quick task index
Shooting
g
Taking pictures with automatic settings
iAUTO (A)
10
Easy photography with special effects
Art lter (ART)16
Choosing an aspect ratio
Aspect ratio 48
Quickly matching settings to the scene
Scene (SCN)17
Pro-level photography made simple
Live guide 18
Taking pictures so that whites come out
white and blacks come out black
Exposure compensation 40
Taking pictures with a blurred background
Live guide 18
Aperture priority shooting 51
Taking pictures that stop the subject in
motion or convey a sense of motion
Live guide 18
Shutter priority shooting 52
Taking pictures with the correct color
White balance 43
One-touch white balance 44
Processing pictures to match the subject/
Taking monotone pictures
Picture Mode 45
Art lter (ART)16
Focus/Focusing on one area
Touch screen 22
AF target 37
Zoom frame AF/zoom AF 38
When the camera won’t focus on your
subject
Focus lock 37
Focusing on a small spot in the frame/
con rming focus before shooting
Zoom frame AF/zoom AF 38
Recomposing photographs after focusing
Focus lock 37
C-AF+TR (AF Tracking) 36
Turning off the beep speaker
8 (Beep sound)
84
Disabling the ash/taking photos without
the ash
Flash 59
ISO/DIS Mode 48/17
Reducing camera shake
Image Stabilizer 42
Anti-Shock 84
Self-timer 49
Remote cable 102
Taking pictures of a subject against
backlight
Flash shooting 59
Gradation (Picture Mode) 45
Photographing reworks
Bulb shooting 53
Scene (SCN)17
Reducing image noise (mottling)
Noise Reduct. 85
Quick task index
27
EN
Quick task index
Taking pictures without white subjects
appearing too white or black subjects
appearing too dark
Gradation (Picture Mode) 45
Histogram/
Exposure compensation
32/40
Tone control 34
Optimizing the monitor/
adjusting monitor hue
Monitor brightness
adjustment
80
Live View Boost 83
Checking set effect before taking a
picture
Multi view display 32, 40
Preview function 51
Test Picture 89
Taking pictures while checking the level
of the camera
Level Gauge
(G/Info Settings)
32
Shooting with deliberate composition
Displayed Grid
(G/Info Settings)
83
Zooming in on photos to check focus
Autoq (Rec View)
80
mode2 (q Close Up Mode)
84
Self-portraits
Self-timer 49
Sequential shooting
Sequential shooting 49
Extending the useful life of the battery
Sleep 84
Increasing the number of pictures that
can be taken
Record mode 47
Playback/Retouch
g
Viewing images on a TV Playback on TV 69
Viewing slideshows with background
music
Slideshow 66
Brightening shadows
Shadow Adj (JPEG Edit) 67
Dealing with red-eye
Redeye Fix (JPEG Edit) 67
Printing made easy
Direct printing 77
Commercial prints
Creating a print order 76
Simple photo sharing
OLYMPUS PENPAL 71
Camera Settings
g
Restoring default settings Reset 35
Saving the settings
Myset 35
Changing the menu display language
W
80
28
EN
Table of Contents
Basic guide 3
Preparations for shooting ...........3
Charging and inserting
the battery ...............................3
Inserting and removing cards .....4
Attaching a lens to the camera ...5
Power on ....................................6
Setting the date/time...................7
Names of parts and functions .....8
Names of parts ...........................8
Camera 8
Camera controls .......................10
Mode dial 10
Basic operations ........................12
Taking photographs/shooting
movies ...................................12
Playback/Erasing ...................... 14
Viewing Images 14
Volume 15
Erasing images 15
Protecting images 15
Using art lters..........................16
Shooting in scene mode ...........17
Using live guides ......................18
Using live control ......................20
Using the menus.......................21
Using the Touch screen ............22
Live Guides 22
Shooting Mode 22
Playback Mode 23
Information displayed in the
monitor ........................................24
Shooting ...................................24
Playback ...................................25
Quick task index 26
Basic photography/
frequently-used options 32
Switching the information
display .........................................32
Choosing shooting controls .....32
Displaying information during
playback ......................................33
Other uses for the INFO
button ..........................................34
Restoring default or custom
settings ........................................35
Using reset settings ..................35
Saving Myset ............................35
Using Myset ..............................35
Choosing a focus mode
(AF mode) ....................................36
Choosing a focus target
(AF target) ...................................37
Focus lock ................................37
Quick AF target selection..........37
Toggling quickly between AF
and MF ..................................37
Zoom frame AF/zoom AF ...........38
Face priority AF/
pupil detection AF ......................39
Taking pictures using face
priority....................................39
Controlling exposure
(exposure compensation) ..........40
Previewing the effects of
exposure compensation and
white balance ........................40
Table of Contents
29
EN
Table of Contents
Changing the brightness of
highlights and shadows ............40
Choosing how the camera
measures brightness
(metering) .................................... 41
Exposure lock (AE lock) ............41
Reducing camera shake
(the image stabilizer) ..................42
Adjusting color
(white balance) ...........................43
White balance compensation ...44
One-touch white balance ..........44
Processing options
(picture mode) ............................45
Image quality (record mode) .....47
Choosing a record mode ..........47
Setting the image aspect ...........48
ISO sensitivity .............................48
Sequential shooting/
using the self timer ....................49
Other shooting options 50
“Point-and-shoot” photography
(P program mode) ......................50
Choosing aperture
(A aperture-priority mode) ........51
Choosing shutter speed
(S shutter-priority mode) ...........52
Choosing aperture and shutter
speed (M manual mode) ............53
Choosing when the exposure
ends (bulb) ............................53
Taking Panoramas ......................54
Taking pictures for
a panorama ...........................54
3D Photography ..........................55
Recording multiple exposures
in a single image
(multiple exposure) ....................56
Varying settings over a series
of photographs (bracketing) .....57
Digital Zoom
(Digital Tele-converter) ..............58
Flash shooting 59
Using a ash
( ash photography) ...................59
Adjusting ash output
(Flash intensity control) .............60
Using external ash units
designated for use with this
camera ......................................... 60
Other external ash units ..........60
Shooting and viewing
movies 61
Changing the settings for
movie recording .........................61
Adding effects to a movie .........61
Movie sound options (recording
sound with movies)................62
Viewing movies ..........................62
Playback options 63
Single-frame playback ...............63
Index display/
calendar display .........................63
Playback zoom
(close-up playback) ....................64
Selecting images ........................65
30
EN
Table of Contents
Table of Contents
Canceling all protections ...........65
All-frame erase ...........................65
Rotate ..........................................65
Slideshow ....................................66
Editing still images .....................67
Image overlay .............................68
Audio recording ..........................68
Viewing camera images on
TV ................................................. 69
Sending and receiving
images 71
Sending images ..........................71
Receiving images/
adding a host ..............................71
Editing the address book ..........72
Creating albums .........................72
Using OLYMPUS Viewer 2/
[ib] 73
Windows ...................................73
Macintosh .................................74
Copying pictures to a computer
without OLYMPUS Viewer 2/
[ib] ................................................ 75
Printing pictures 76
Print reservation (DPOF) ...........76
Creating a print order................76
Removing all or selected pictures
from the print order ................77
Direct printing (PictBridge) .......77
Easy printing .............................78
Custom printing ........................78
Camera setup 80
Setup Menu .................................80
X (Date/time setting) ...............80
W (Changing the display
language) ..............................80
i (Monitor brightness
adjustment)............................80
Rec View ..................................80
c/# Menu Display ..................80
Firmware...................................80
Customizing camera
settings 81
Before Using the Custom/
Accessory Port Menus ..........81
Custom Menu options ................81
R AF/MF ..................................81
S Button/Dial ...........................82
T Release ................................83
U Disp/8/PC ..........................83
V Exp/p/ISO ..........................84
W #Custom .............................85
X K/Color/WB ....................... 85
Y Record/Erase .......................86
Z Movie ...................................87
b
K
Utility ..............................88
AEL/AFL ...................................88
U Function, V Function,
R Function ............................89
Accessory port menu options ...90
A OLYMPUS PENPAL
Share ..................................... 90
B OLYMPUS PENPAL
Album ....................................90
C Electronic View nder ...........90
31
EN
Table of Contents
Using the super control panel ...91
Recording movies with the
shutter button .............................92
Taking a photograph when
recording ends.......................92
Wireless remote control ash
photography ...............................93
Information 94
Shooting tips and
information ..................................94
Error codes .................................96
Cleaning and storing
the camera ..................................98
Cleaning the camera ................98
Storage .....................................98
Cleaning and checking
the image pickup device ........98
Pixel mapping - Checking the
image processing functions ...98
Card basics .................................99
Usable cards.............................99
Formatting the card ..................99
Battery and charger .................100
Using your charger abroad .....100
Interchangeable lenses ............100
M.ZUIKO DIGITAL lens
speci cations .......................101
Principal Accessories ..............102
Mount adapter ........................102
Remote cable (RM–UC1) .......102
Converter lenses ....................102
Macro arm light (MAL–1) ........102
Microphone set (SEMA–1) .....102
Electronic view nder (VF-2) ...102
Camera grip ............................102
Exposure warning display .......103
Flash modes that can be set
by shooting mode ....................104
Flash synchronization and
shutter speed ............................105
External ash shooting ............105
Record mode and le size/
number of storable still
pictures .....................................106
Menu directory ..........................107
Speci cations ........................... 111
SAFETY PRECAUTIONS 113
SAFETY PRECAUTIONS ..........113
System chart 120
Index 122
32
EN
Basic photography/frequently-used options
1
1
The INFO button can be used to choose the information and type of controls displayed
during shooting.
Switching the information display
Press the INFO button to choose the information displayed when shooting.
Highlight & Shadow display
*2
Histogram display
Image onlyLevel gauge display
*2
Multi view display
*2
Information display on
*1
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
L
N
01:02:0301:02:03
3838
250250 F5.6
P
0.00.0
ISO
200
HD
L
N
01:02:0301:02:03
3838
250250 F5.6
P
0.00.0
ISO
200
HD
L
N
01:02:0301:02:03
3838
250250 F5.6
P
0.00.0
ISO
200
HD
250250 F5.6
P
0.00.0
ISO
200
WB/
0.0
+0.7+0.3
-
0.3
Set
INFOINFO
*1 You can display a framing grid or choose the type of grid displayed using [G/Info
Settings] > [LV-Info]. g “Customizing camera settings” (P. 81)
*2 Displayed when [On] is selected for [G/Info Settings] > [LV-Info]. g “Customizing
camera settings” (P. 81)
Choosing shooting controls
Shooting options can be displayed by pressing Q. You can choose the types of display
available using the [
K
Control Settings] option in the custom menus (P. 81).
ART/SCN
Scene menu
250250 F5.6
P
3636
Super Fine
Off
mall
NORM
ISO
AUTO
AUTO
WB
AUTO
+RAW+RAW
4:3
Metering
Super control panel*
WB
AUTO
WBWBWB
AUTOAUTOAUTO
AUTOAUTO
L
F
IS OFFIS OFF
4:3
j
HD
WB
AUTO
WBWBWB
AUTOAUTOAUTO
P
WBWB
AUTOAUTO
WB Auto
Live control*
INFO
INFO INFOINFO
Art lter menu
ART 1
1
7
Pop Art
Exit
Set
SCN 1 Portrait
Exit
Set
P/A/S/M
250250 F5.6
P
3636
Super Fine
Off
mall
NORM
ISO
AUTO
AUTO
WB
AUTO
+RAW+RAW
4:3
Metering
Super control panel*
WB
AUTO
WBWBWB
AUTOAUTOAUTO
AUTOAUTO
L
F
IS OFFIS OFF
4:3
j
HD
WB
AUTO
WBWBWB
AUTOAUTOAUTO
P
WBWB
AUTOAUTO
WB Auto
Live control
INFO
INFO
INFO
INFO
Can be displayed using [
K
Control Settings].*
Basic photography/frequently-used
options
33
EN
Basic photography/frequently-used options
1
Displaying information during playback
The INFO button can be used to choose the information displayed during playback.
Overall display (P. 25)
Simpli ed display (P. 25)
Highlight & Shadow display*Light box display
*
Histogram display
*
Image only
*
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
2011.05.01 12:30 15
100-0015
4
:
3
L
N
×10×10
F5.6F5.6
±0.0±0.0
G±10G±10A±10A±10
AdobeAdobe
NaturalNatural
ISO 400ISO 400
250250
+2.0+2.0 45mm45mm
1/84032×3024
×10×10
4
:
3
L
N
2011.05.01 12:30 15
100-0015
WB
AUTO
P
1615
15
Shadow
Highlight
2011.05.01 12:30 15
×10×10
INFOINFO
Displayed when [On] is selected for [G/Info Settings] > [q Info]. g “Customizing
camera settings” (P. 81)
Histogram display
Display a histogram showing the distribution of brightness in the image. The horizontal axis
gives the brightness, the vertical axis the number of pixels of each brightness in the image.
Areas above the upper limit at shooting are displayed in red, those below the lower limit in
blue, and the area metered using spot metering in green.
Highlight & Shadow display
Areas above the upper limit of brightness for the image are shown in red, those below the
lower limit in blue. [Histogram Settings]: g “Customizing camera settings” (P. 81)
Light box display
Compare two images side-by-side. Press Q to select the image on the opposite side of the
display. In addition to adjusting settings using [G/Info Settings] in the custom menus, you
will also have to select [mode2] for [q Close Up Mode]. g “Customizing camera settings”
(P. 81)
The base image is displayed on the right. Use HI to select an image and press Q to
move the image to the left. The image to be compared to the image on the left can be
selected on the right. To choose a different base image, highlight the right frame and
press Q.
Press U to zoom in on the current image. Use the sub dial to zoom in or out.
Use FGHI to view other areas of the picture. The image displayed changes each time
the INFO or U button is pressed.
2x
2x
53 54
2x
INFO
or
U
INFO
or
U
INFO
or
U
*
34
EN
Basic photography/frequently-used options
1
Other uses for the INFO button
One-touch white balance
To view the one-touch white balance dialog, press the
INFO button in the one-touch white balance menu (P. 44).
L
F
IS OFFIS OFF
4:3
j
P
WBWB
11
11
22
CWBCWB
HD
Capture WB
Color temperature
To view the color temperature dialog, press the INFO
button in the custom white balance menu (P. 43).
L
F
IS OFFIS OFF
4:3
j
P
WBWB
2211
CWBCWB
CWB
CWB
5400 K
HD
Kelvin
Playback zoom
To zoom an image in or out, press the U button to initiate
playback zoom and then press the INFO button and use
FG.
2x
Tone control
Exposure compensation, aperture, and
shutter speed can be adjusted by pressing
the F button. The tone control dialog can be
displayed by pressing the INFO button after
pressing the F button. You can then use HI
to choose the tone level. g “Changing the
brightness of highlights and shadows” (P. 40)
250250 F5.6
ISO
200
L
N
1
ISIS
P
01:02:0301:02:03
12341234
j
HD
00
+
2.0
+
2.0
Focal length
To choose the focal length for image stabilization, press
the INFO button in the IS mode dialog and use FGHI
or the control dials. g “Reducing camera shake
(the image stabilizer)” (P. 42)
L
F
4:3
j
P
WB
AUTO
WBWBWB
AUTOAUTOAUTO
mmmm5050
HD
Focal Length
Auto
Help
Help is displayed automatically about two seconds after an
item is selected. To disable help, press the INFO button.
Press the INFO button again to re-enable help.
j
4:3
D
2
1
Shooting Menu 1
Card Setup
Reset/Myset
Picture Mode
Image Aspect
Back
Delete all pictures in the
memory card or format
the memory card.
Set
35
EN
Basic photography/frequently-used options
1
Restoring default or custom settings
Camera settings can be easily restored to one of three presets.
Reset: Restore default settings.
Myset: Restore preselected settings for P, A, S, or M mode. The shooting mode
does not change. Up to four sets of preselected settings can be stored.
Quick Myset: Stored settings take effect while the Fn1 or R button is pressed. Shooting
mode is adjusted to the preset settings.
Using reset settings
1
Select [Reset/Myset] in shooting menu W
(P. 107).
2
Select [Reset] and press Q.
Highlight [Reset] and press I to choose the reset
type. To reset all settings except the time and date,
highlight [Full] and press Q.
g “Menu directory” (P. 107)
3
Select [Yes] and press Q.
Reset/Myset
Reset
Myset1
Myset2
Myset3
Myset4 Set
Set
Set
Set
Basic
Back
Set
Saving Myset
1
Adjust settings in order to save.
2
Select [Reset/Myset] in shooting menu W (P. 107).
3
Select the desired destination ([Myset1]–[Myset4]) and press I.
[Set] appears next to destinations ([Myset1]–[Myset4]) to which settings have already
been saved. Selecting [Set] again overwrites the registered setting.
To cancel the registration, select [Reset].
4
Select [Set] and press Q.
g “Menu directory” (P. 107)
Using Myset
1
Select [Reset/Myset] in shooting menu W
(P. 107).
2
Select the desired settings ([Myset1]–[Myset4])
and press Q.
3
Select [Set] and press Q.
Reset/Myset
Reset
Myset1
Myset2
Myset3
Myset4 Set
Set
Set
Set
Basic
Back
Set
36
EN
Basic photography/frequently-used options
1
Choosing a focus mode (AF mode)
Select a focusing method (focus mode).
1
Display the live control (P. 20) and select the AF
mode item using FG.
2
Select an option with HI and press Q.
The selected AF mode is displayed on the monitor.
S-AFS-AF
S-AF
S-AF
P
S-AFS-AF
S-AF
S-AF
C-AFC-AF
MFMF
ISO
AUTO
ISOISOISO
AUTOAUTOAUTO
RR
S-AFS-AF
MF
C-AFC-AF
TR
Single AF
S-AF (single AF)
The camera focuses once when the shutter button is pressed
halfway. When the focus is locked, a beep sounds, and the AF
con rmation mark and the AF target mark light up. This mode
is suitable for taking pictures of still subjects or subjects with
limited movement.
C-AF
(continuous AF)
The camera repeats focusing while the shutter button remains
pressed halfway. When the subject is in focus, the AF
con rmation mark lights up on the monitor and the beep sounds
when the focus is locked at the rst and second time. Even if
the subject moves or you change the composition of the picture,
the camera continues trying to focus.
Four Thirds system lenses focus using [S-AF].
MF (manual focus)
This function allows you
to manually focus on
any subject.
Near
)
Focus ring
S-AF+MF
(simultaneous use of
S-AF mode and MF
mode)
After pressing the shutter button halfway to focus in [S-AF]
mode, you can turn the focus ring to ne-adjust focus manually.
C-AF+TR
(AF tracking)
Press the shutter button halfway to focus; the camera then
tracks and maintains focus on the current subject while the
shutter button is held in this position.
The AF target is displayed in red if the camera can no longer
track the subject. Release the shutter button and then frame
the subject again and press the shutter button halfway.
Four Thirds system lenses focus using [S-AF].
% Tips
The [Rls Priority S] (P. 83) and [Rls Priority C] (P. 83) options can be used to choose
whether the shutter can be released when the camera is unable to focus.
[MF Assist] (P. 82) can be used to enable automatic zoom display when the lens focus
ring is rotated.
[Focus Ring] (P. 82) allows you to change the rotational direction of the focus ring.
# Cautions
The camera may be unable to focus if the subject is poorly lit, obscured by mist or smoke,
or lacks contrast.
37
EN
Basic photography/frequently-used options
1
Choosing a focus target (AF target)
Choose which of the 35 autofocus targets will be used for autofocus.
1
Press the P button (H) to display the AF target.
2
Use FGHI to select the single target display and position the AF
target.
“All targets” mode is restored if you move the cursor off the screen.
You can choose from the following three target types. Press the INFO button and
use FG.
All Targets Single Target Group Target
The camera automatically
chooses from the full set of
focus targets.
Select the focus target
manually.
The camera automatically
chooses from the targets in
the selected group.
Focus lock
If the camera is unable to focus on your chosen subject, select single target mode and use
focus lock to focus on another subject at about the same distance.
1
In [S-AF] mode, position the AF target over the subject and press the
shutter button halfway.
Make sure that the AF con rmation mark is lighting up.
Focus locks while the shutter button is pressed halfway.
2
Keeping the shutter button pressed halfway, recompose the photograph
and then press the shutter button the rest of the way down.
Do not change the distance between the camera and the subject while pressing the
shutter button halfway.
Quick AF target selection
You can save the selected AF target for quick recall using the Fn1/Fn2 or R buttons.
Select the AF target using [P Set Home] (P. 82).
Use [U Function], [V Function], or [R Function] to assign this function to the button.
[Button Function]: g “Customizing camera settings” (P. 81)
Toggling quickly between AF and MF
The Fn1/Fn2 or R button can be used to toggle [MF].
Use [U Function], [V Function], or [R Function] to assign this function to the button.
[Button Function]: g “Customizing camera settings” (P. 81)
38
EN
Basic photography/frequently-used options
1
Zoom frame AF/zoom AF
You can zoom in on a portion of the frame when adjusting focus. Choosing a high
zoom ratio allows you to use autofocus to focus on a smaller area than is normally
covered by the AF target. You can also position the focus target more precisely.
L
N
01:02:0301:02:03
3030
250250 F5.6
0.00.0
ISO
200
HD
Shooting display
L
N
01:02:0301:02:03
3030
250250 F5.6
0.00.0
ISO
200
HD
Zoom frame AF Zoom AF
U
U
U
Q
Q
/
/
U
U
(Press and hold)
1
Press the U button to display the zoom frame.
If the camera was focused using autofocus just before the button was pressed, the
zoom frame will be displayed at the current focus position.
Use FGHI to position the zoom frame.
Press the INFO button and use FG to choose the zoom ratio.
Comparison of AF and
zoom frames
14x
10x
7x
5x
2
Press the U button again to zoom in on the zoom frame.
Use FGHI to position the zoom frame.
Press the INFO button and use FG to choose the zoom ratio.
3
Press the shutter button halfway to initiate autofocus.
$ Notes
Autofocus is available and pictures can be taken both when the zoom frame is displayed
and when the view through the lens is zoomed in.
# Cautions
Zoom is visible only in the monitor and has no effect on the resulting photographs.
39
EN
Basic photography/frequently-used options
1
Face priority AF/pupil detection AF
The camera detects faces and adjusts focus and digital ESP.
Taking pictures using face priority
1
Display the live control (P. 20) and select the
face priority item using FG.
2
Use HI to select an option and press Q.
S-AFS-AF
P
iiiRiR iLiL
ISO
AUTO
ISOISOISO
AUTOAUTOAUTO
RR
S-AFS-AF
Face Priority On
J
Face Priority Off Face priority off.
I
Face Priority On Face priority on.
K
Face & Eye Priority On
The autofocus system selects the pupil of the eye
closest to the camera for face-priority AF.
L
Face & R. Eye Priority On
The autofocus system selects the pupil of the eye
on the right for face-priority AF.
M
Face & L. Eye Priority On
The autofocus system selects the pupil of the eye
on the left for face-priority AF.
3
Point the camera at your subject.
If a face is detected, it will be indicated by a white
border.
L
N
01:02:0301:02:03
10231023
250250 F5.6
P
ii
0.00.0
ISO
200
HD
4
Press the shutter button halfway to focus.
When the camera focuses on the face in the white
border, the border will turn green.
If the camera is able to detect the subject’s eyes, it will
display a green frame over the selected eye.
(pupil detection AF)
L
N
01:02:0301:02:03
10231023
250250 F5.6
P
ii
0.00.0
ISO
200
HD
5
Press the shutter button the rest of the way down to shoot.
# Cautions
Face priority applies only to the rst shot in each sequence taken during sequential
shooting.
Depending on the subject, the camera may not be able to correctly detect the face.
In metering modes other than [p (Digital ESP metering)], the camera will meter exposure
for the selected position.
$ Notes
Face priority is also available in [MF]. Faces detected by the camera are indicated by
white frames.
40
EN
Basic photography/frequently-used options
1
Controlling exposure (exposure compensation)
Press the F button (F) and rotate the main or sub dial to adjust exposure. Choose
positive (“+”) values to make pictures brighter, negative (“–”) values to make pictures
darker. Exposure can be adjusted by ±3 EV.
Negative (–) No compensation (0) Positive (+)
% Tips
To change the exposure adjustment interval. [EV Step]: g “Customizing camera
settings” (P. 81)
# Cautions
Exposure compensation is not available in A, M, or SCN modes.
Previewing the effects of exposure compensation and white
balance
The effects of exposure compensation and white balance can be previewed in the 4-
split screen.
1
Select [On] for [G/Info Settings] > [Multi View]
in the c Custom menu (P. 81).
2
Press the INFO button repeatedly to display
the multi view display.
This function is not available in A, ART, SCN or
n mode.
3
Use HI to select the desired value and press Q.
Use FG to toggle between the exposure compensation and white balance displays.
Changing the brightness of highlights and shadows
To display the tone control dialog, press the F button
(F) and press the INFO button. Use HI to choose a
tone level. Choose “low” to darken shadows or “high” to
brighten highlights.
250250 F5.6
ISO
200
L
N
1
ISIS
P
01:02:0301:02:03
12341234
j
HD
00
+
2.0
+
2.0
Exposure
compensation
Tone level: low Tone level: high
INFO
INFO
INFO
INFO
INFO
INFO
00
+1+1
00
WB/
0.0
+0.7+0.3
-
0.3
SetWB/
0.0
+0.7+0.3
-
0.3
Set
41
EN
Basic photography/frequently-used options
1
Choosing how the camera measures brightness
(metering)
Choose how the camera meters subject brightness.
1
Display the live control (P. 20) and select the
metering item using FG.
2
Select an option with HI and press Q.
S-AFS-AF
P
ISO
AUTO
ISOISOISO
AUTOAUTOAUTO
RR
S-AFS-AF
ESP
HIHI SHSH
OFFOFF
p
Digital ESP
metering
The camera meters exposure in 324 areas of the frame
and optimizes exposure for the current scene or (if an
option other than [OFF] is selected for [I Face Priority])
portrait subject. This mode is recommended for general
use.
H
Center weighted
averaging
metering
This metering mode provides the average
metering between the subject and the
background lighting, placing more weight
on the subject at the center.
I
Spot metering
Choose this option to meter a small area
(about 2% of the frame) with the camera
pointed at the object you wish to meter.
Exposure will be adjusted according to the
brightness at the metered point.
IHI
Spot metering -
highlight control
Increases spot metering exposure. Ensures bright
subjects appear bright.
ISH
Spot metering -
shadow control
Lowers spot metering exposure. Ensures dark subjects
appear dark.
3
Press the shutter button halfway.
Normally, the camera will start metering when the shutter button is pressed halfway
and lock exposure while the shutter button is held in this position.
Exposure lock (AE lock)
To lock exposure without locking focus, press the Fn1 or
R button. Exposure lock can be used when you want to
set focus and exposure separately while recomposing
photographs, or if you want to take a series of photographs
at the same exposure.
Assign AEL/AFL to the Fn1 or R button using
[U Function] or [R Function].
250250 F5.6
L
N
01:02:0301:02:03
3838
P
AEL
0.00.0
ISO
400
HD
AE lock
Exposure locks and a B icon is displayed when the button is pressed once. Press
the shutter button to take a picture.
Press the button again to cancel AE lock.
% Tips
To lock exposure while the button is pressed. [AEL/AFL Memo]:
To activate AE lock with a set metering mode. [AEL Metering]:
g “Customizing camera settings” (P. 81)
42
EN
Basic photography/frequently-used options
1
Reducing camera shake (the image stabilizer)
You can reduce the amount of camera shake that can occur when shooting in low light
situations or shooting with high magni cation.
1
Display the live control (P. 20) and select the
image stabilizer item using FG.
L
F
4:3
j
P
WB
AUTO
WBWBWB
AUTOAUTOAUTO
mmmm5050
HD
Focal Length
Auto
2
Select an option with HI and press Q.
J
IS Off Image stabilizer is off.
e
Auto Image stabilizer is on.
f
Vertical IS
Image stabilization applies only to vertical (Y) camera
shake. Use when panning the camera horizontally.
g
Horizontal IS
Image stabilization applies only to horizontal (Z) camera
shake. Use when panning the camera horizontally with the
camera held in portrait orientation.
Choosing a focal length (Micro Four Thirds/Four Thirds System lenses excluded)
Use focal length information to reduce camera shake when shooting with lenses that are not
Micro Four Thirds or Four Thirds system lenses.
1
Select
the [Image Stabilizer] item in the live
control (P. 20) and press the INFO button.
2
Use HI to choose a focal length and press
Q.
Choose a focal length between 8 mm and 1000 mm.
Choose the value that most closely matches to the one
that is printed on the lens.
L
F
4:3
j
P
WB
AUTO
WBWBWB
AUTOAUTOAUTO
mmmm5050
HD
Auto
# Cautions
The image stabilizer cannot correct excessive camera shake or camera shake that occurs
when the shutter speed is set to the slowest speed. In these cases, it is recommended
that you use a tripod.
When using a tripod, set [Image Stabilizer] to [OFF].
When using a lens with an image stabilization function, turn off the image stabilizer
function of either the lens or the camera.
You may notice an operating sound or vibration when the image stabilizer is activated.
The image stabilizer will not activate at shutter speeds of over 2 seconds.
43
EN
Basic photography/frequently-used options
1
Adjusting color (white balance)
White balance (WB) ensures that white objects in images recorded by the camera
appear white. [AUTO] is suitable in most circumstances, but other values can be
selected according to the light source when [AUTO] fails to produce the desired results
or you wish to introduce a deliberate color cast into your images.
1
Display the live control (P. 20) and select the
white balance item using FG.
2
Select an option using HI and press
Q
.
WB
AUTO
WBWBWB
AUTOAUTOAUTO
AUTOAUTO
L
F
IS OFFIS OFF
4:3
j
HD
WB
AUTO
WBWBWB
AUTOAUTOAUTO
P
WBWB
AUTOAUTO
WB Auto
WB mode
Color
temperature
Light conditions
Auto white
balance
AUTO
k
Used for most light conditions (when there is a
white portion framed on the monitor). Use this
mode for general use.
Preset
white
balance
5
5300K
For shooting outdoors on a clear day, or to
capture the reds in a sunset or the colors in a
reworks display
N
7500K
For shooting outdoors in the shadows on a
clear day
O
6000K For shooting outdoors on a cloudy day
1
3000K For shooting under a tungsten light
>
4000K For subjects lit by uorescent lights
n
5500K For ash shooting
One-touch
white
balance
(P. 44)
P/Q
Color
temperature
set by one-
touch WB.
Choose when a white or gray subject can
be used to measure white balance and the
subject is under mixed lighting or lit by an
unknown type of ash or other light source.
Custom
white
balance
CWB
2000K –
14000K
After pressing the INFO button, use HI
buttons to select a color temperature and then
press Q.
White balance color temperature
As their temperature increases, objects rst start to shine red and then to shine blue as the
temperature rises further. Color temperature expresses the color of light in this way using
absolute temperatures in degrees K (kelvin).
Fluorescent light sources indicated by
white dots in the accompanying gure have
colors that differ slightly from those on the
color temperature scale; the values shown
in the gure have been converted to color
temperatures for illustrative purposes.
44
EN
Basic photography/frequently-used options
1
White balance compensation
This function lets you make ne changes to the auto WB and preset WB settings.
1
Select [WB] in c Custom Menu (P. 81) tab X.
2
Select the option to be modi ed and press I.
3
Select a slider with HI and use FG to choose the amount.
Adjusting the white balance in the A direction
(Amber-Blue)
Higher values produce “warmer” (redder) tints, lower
values “cooler” (bluer) tints.
Adjusting the white balance in the G direction
(Green-Magenta)
Higher values produce greener tints, lower values tints
that are more purple.
+2
A
-
5
G
WB Preview
Back
Auto
Set
4
Press Q to save settings and exit.
% Tips
To display a test photograph taken at the selected white balance value, press the R
button.
Adjusting all WB mode settings at once. [All >]: g “Customizing camera settings”
(P. 81)
One-touch white balance
Measure white balance by framing a piece of paper or other white object under
the lighting that will be used in the nal photograph. This is useful when shooting a
subject under natural light, as well as under various light sources with different color
temperatures.
1
Select [P] or [Q] (one-touch white balance 1 or 2) and press the
INFO button.
2
Photograph a piece of colorless (white or gray) paper.
Frame the object so that it lls the display and no shadows fall it.
The one-touch white balance screen appears.
3
Select [Yes] and press Q.
The new value is saved as a preset white balance option.
The new value is stored until one-touch white balance is measured again. Turning the
power off does not erase the data.
% Tips
If the subject is too bright or too dark or visibly tinted, the message “WB NG Retry” will be
displayed and no value will be recorded. Correct the problem and repeat the process from
Step 1.
45
EN
Basic photography/frequently-used options
1
Processing options (picture mode)
Select a picture mode and make individual adjustments to contrast, sharpness, and
other parameters. Changes to each picture mode are stored separately.
1
Select [Picture Mode] in shooting menu W
(P. 107).
2
Select an option with FG and press Q.
j
4:3
D
2
1
Shooting Menu 1
Card Setup
Reset/Myset
Picture Mode
Image Aspect
Back
Set
Picture modes
h
i-Enhance Produces more impressive-looking results suited to the scene.
i
Vivid Produces vivid colors.
j
Natural Produces natural colors.
Z
Muted Produces at tones.
a
Portrait Produces beautiful skin tones.
Monotone Produces black and white tone.
Custom
Select one picture mode, set the parameters, and register the
setting.
j
Pop Art
Choose an art lter and select the desired effect.
k
Soft Focus
l
Pale&Light Color
m
Light Tone
n
Grainy Film
o
Pin Hole
s
Diorama
t
Cross Process
u
Gentle Sepia
v
Dramatic Tone
46
EN
Basic photography/frequently-used options
1
3
Press I to display settings for the selected option.
h i-aJ K
Contrast Distinction between light and dark
DDDD
Sharpness Sharpness of the image
DDDD
Saturation Vividness of the color
DD
k
D
Gradation Adjust tone (gradation).
DDDD
Auto
Divides the image into
detailed regions and adjusts
the brightness separately for
each region. This is effective
for images with areas of large
contrast in which the whites
appear too bright or the blacks
appear too dark.
Normal
Use [Normal] mode for general
uses.
High Key Gradation for a bright subject.
Low Key Gradation for a dark subject.
Effect
(i-Enhance)
Sets the extent that the effect will
be applied.
D
kk
D
B&W Filter
(Monotone)
Creates a black and white image.
The lter color is brightened
and the complementary color is
darkened.
kk
DD
N:Neutral
Creates a normal black and
white image.
Ye:Yellow
Reproduces clearly de ned white
cloud with natural blue sky.
Or:Orange
Slightly emphasizes colors in
blue skies and sunsets.
R:Red
Strongly emphasizes colors in
blue skies and brightness of
crimson foliage.
G:Green
Strongly emphasizes colors in
red lips and green leaves.
Pict. Tone
(Monotone)
Colors the black and white image.
kk
DD
N:Neutral
Creates a normal black and
white image.
S:Sepia Sepia
B:Blue Bluish
P:Purple Purplish
G:Green Greenish
# Cautions
Changes to contrast have no effect at settings other than [Normal].
47
EN
Basic photography/frequently-used options
1
Image quality (record mode)
Select an image quality for photographs and movies according their intended use, for
example retouching on a computer or display on the web.
Choosing a record mode
1
Display the live control (P. 20) and use FG
to choose a record mode for movies or
photographs.
2
Select an option using HI and press Q.
L
F
4:3
j
P
WB
AUTO
WBWBWB
AUTOAUTOAUTO
IS OFFIS OFF
RAWRAW
L
N
M
N
S
N
3838
HD
4032x3024
Record mode
Record modes (still images)
Choose from RAW and JPEG (YF, YN, XN, and WN) modes. Choose a RAW+JPEG option
to record both a RAW and a JPEG image with each shot. JPEG modes combine image
size (Y, X, and W) and compression ratio (SF, F, N, and B). The options available can be
selected using the [K Set] option in the custom menus. g “Customizing camera settings”
(P. 81)
Image size Compression rate
Application
Name Pixel count
SF
(Super
Fine)
F
(Fine)
N
(Normal)
B
(Basic)
Y (Large)
4032×3024*
YSF YF* YN* YB
Select for the
print size
X (Middle)
3200×2400
XSF XF XN* XB
2560×1920*
1920×1440
1600×1200
W (Small)
1280×960*
WSF WF WN* WB
For small prints
and use on a
web site
1024×768
640×480
Default.
The size of [X] and [W] images can be selected using the [Pixel Count] option in the
custom menus. g “Customizing camera settings” (P. 81)
RAW image data
This format (extension “.ORF”) stores unprocessed image data for later processing. RAW
image data can not be viewed using other cameras or software, and RAW images can not
be selected for printing. JPEG copies of RAW images can be created using this camera.
g “Editing still images” (P. 67)
*
48
EN
Basic photography/frequently-used options
1
Record modes (movies)
Record mode Pixel count Frame rate File format Application
Full HD Fine 1920×1080 59.94i
*2
AVCHD
*1
For viewing on
AVCHD devices.
Full HD Normal 1920×1080 59.94i
*2
HD Fine 1280×720 59.94p
*2
HD Normal 1280×720 59.94p
*2
HD 1280×720
Approx. 30 fps
*3
Motion JPEG
*4
For computer
playback or
editing.
SD 640×480
Depending on the type of card used, recording may end before the maximum length is
reached.
*1 Individual les can be up to 4 GB in size or 29 minutes in length.
*2 Image sensor output about 30 fps.
*3 The frame rate may drop when an art lter is used.
*4 Files may be up to 2GB in size.
Setting the image aspect
You can change the aspect ratio (horizontal-to-vertical ratio) when taking pictures
using live view. Depending on your preference, you can set the aspect ratio to [4:3]
(standard), [16:9], [3:2], [6:6], or [3:4].
1
Display the live control (P. 20) and select the aspect ratio item using
FG.
2
Use HI to select an aspect ratio and press Q.
# Cautions
JPEG images are cropped to the selected aspect ratio; RAW images, however, are not
cropped but are instead saved with information on the selected aspect ratio.
When RAW images are played back, the selected aspect ratio is shown by a frame.
% Tips
For information on cropping existing photographs or changing their aspect ratio, see
“Editing still images” (P. 67).
ISO sensitivity
Increasing ISO sensitivity increases noise (graininess) but allows photographs to be
taken when lighting is poor. The setting recommended in most situations is [AUTO],
which starts at ISO 200 — a value that balances noise and dynamic range — and then
adjusts ISO sensitivity according to shooting conditions.
1
Display the live control (P. 20) and select the ISO sensitivity item using
FG.
2
Select an option using HI and press Q.
49
EN
Basic photography/frequently-used options
1
AUTO
The sensitivity is set automatically according to the shooting
conditions.
200 – 12800 Sensitivity is set to the selected value.
% Tips
The default value and upper limit for auto ISO sensitivity can be selected using
[ISO-Auto Set].
The options available for ISO sensitivity can be selected using [ISO Step].
Auto sensitivity can be enabled in M mode using [ISO-Auto].
g “Customizing camera settings” (P. 81)
Sequential shooting/using the self timer
The camera will take photos at a rate of about 3 frames per second (fps) while the
shutter button is pressed all the way down. Alternatively, the self-timer can be used for
self- or group-portraits or to reduce camera shake when the camera is mounted on a
tripod or otherwise xed in place.
1
Press the jY button (G) to display the direct menu.
2
Select an option using HI and press Q.
o
Single-frame
shooting
Shoots 1 frame at a time when the shutter button is pressed
(normal shooting mode).
j
Sequential
shooting
Photographs are taken at about 3 frames per second (fps)
while the shutter button is pressed all the way down ([S-AF]
or [MF] selected for [AF Mode], P. 36).
Y12s
Self-timer
12 SEC
Press the shutter button halfway to focus, the rest of the way
down to start the timer. First, the self-timer lamp lights up for
approximately 10 seconds, then it blinks for approximately 2
seconds and the picture is taken.
Y2s
Self-timer
2 SEC
Press the shutter button halfway to focus, the rest of the
way down to start the timer. The self-timer lamp blinks for
approximately 2 seconds, and then the picture is taken.
$ Notes
To cancel the activated self-timer, press the jY button.
During sequential shooting, focus, exposure, and white balance are locked at the rst
frame (during [S-AF], [MF]).
# Cautions
During sequential shooting, if the battery check blinks due to low battery, the camera
stops shooting and starts saving the pictures you have taken on the card. The camera
may not save all of the pictures depending on how much battery power remains.
Fix the camera securely on a tripod for self-timer shooting.
If you stand in front of the camera to press the shutter button halfway when using the self-
timer, the photograph may be out of focus.
50
EN
Other shooting options
2
2
“Point-and-shoot” photography (P program mode)
In mode P, the camera automatically adjusts shutter speed and aperture in response
to subject brightness.
1
Set the mode dial to P.
2
Take pictures.
The shutter speed and aperture
selected by the camera are displayed
in the monitor.
Rotate the main (or sub) dial for
program shift.
Press the F button (F) and rotate
a dial to adjust exposure compensation.
250250 F5.6
01:02:0301:02:03
3838
L
N
P
0.00.0
ISO
400
HD
Shooting mode
AF con rmation mark
Shutter speed Aperture value
Program shift (%)
In P and ART modes, you can rotate a dial to choose
different combinations of aperture and shutter speed without
altering exposure. This is known as “program shift.” “s
appears next to the shooting mode during program shift.
To cancel program shift, rotate the dial in the opposite
direction until “s” is no longer displayed.
# Cautions
Program shift is not available when you are using a ash.
250250 F5.6
01:02:0301:02:03
3838
L
N
P
s
0.00.0
ISO
400
HD
Program shift
# Cautions
The shutter speed and aperture displays ash if the camera is unable to achieve optimal
exposure. See “Exposure warning display” (P. 103).
% Tips
Changing the roles of the main and sub dials. [Dial Function]:
Locking the dials to prevent accidental changes to settings. [dLock]:
g “Customizing camera settings” (P. 81)
Other shooting options
51
EN
Other shooting options
2
Choosing aperture (A aperture-priority mode)
In mode A, you choose the aperture and let the camera automatically adjust shutter
speed for optimal exposure.
1
Rotate the mode dial to A.
2
Rotate the main (or sub) dial to choose the
aperture.
Press the F button (F) and rotate a dial to adjust
exposure compensation.
Aperture value
250250 F5.6
01:02:0301:02:03
3838
L
N
A
+0.0+0.0
ISO
400
HD
3
Take pictures.
Larger apertures (lower f-numbers) decrease depth of eld (the area in front of or
behind the focus point that appears to be in focus), softening background details.
Smaller apertures (higher f-numbers) increase depth of eld.
When the
aperture
value (f-
number) is
decreased
When the
aperture
value
(f-number) is
increased
Preview function
The Fn1/Fn2 and R buttons can be used to preview
depth of eld. If [Preview] is assigned to any of these
buttons using the [U Function], [V Function], or
[R Function] option in the custom menus, you can
press and hold the button to stop aperture down to the
selected value and preview depth of eld (the distance
behind and in front of the focus point that appears to be
in focus) in the monitor. [Button Function]:
g “Customizing camera settings” (P. 81)
Fn1 button
R button
Fn2 button
% Tips
Changing the roles of the main and sub dials. [Dial Function]:
g “Customizing camera settings” (P. 81)
52
EN
Other shooting options
2
Choosing shutter speed (S shutter-priority mode)
In mode S, you choose the shutter speed and let the camera automatically adjust
aperture for optimal exposure.
1
Rotate the mode dial to S.
2
Rotate the main (or sub) dial to choose the
shutter speed.
Press the F button (F) and rotate a dial to adjust
exposure compensation.
Shutter speed
250250 F5.6
01:02:0301:02:03
3838
L
N
S
+0.0+0.0
ISO
400
HD
3
Take pictures.
A fast shutter speed can freeze a fast action scene without any blur. A slow shutter
speed will blur a fast action scene. This blurring will give the impression of dynamic
motion.
Fast shutter
speed
Slow shutter
speed
% Tips
Changing the roles of the main and sub dials. [Dial Function]:
g “Customizing camera settings” (P. 81)
53
EN
Other shooting options
2
Choosing aperture and shutter speed (M manual mode)
In mode M, you choose both the aperture and the shutter speed. At a speed of BULB,
the shutter remains open while the shutter button is pressed.
1
Rotate the mode dial to M.
2
Rotate the dials to choose shutter speed and aperture.
Rotate the main dial to choose shutter speed, the sub dial to choose aperture.
To use the arrow pad to adjust shutter speed and aperture, begin by pressing the F
button (F) and then use HI to select the aperture and FG to choose the shutter
speed.
The shutter speed can be set to 1/4000 60 sec. or [BULB].
3
Take pictures.
# Cautions
Exposure compensation is not available in M mode.
Choosing when the exposure ends (bulb)
You can take a picture with a bulb exposure time in which the shutter stays open as
long as you hold down the shutter button. Time the end of the exposure to suit the
subject. Use for night landscapes and reworks. In M mode, set the shutter speed to
[BULB].
[BULB] is displayed on the monitor.
% Tips
Changing the roles of the main and sub dials. [Dial Function]:
To automatically end bulb shooting after a speci ed period of time. [Bulb Timer]:
To x the focus during manual focus shooting. [Bulb Focusing]:
g “Customizing camera settings” (P. 81)
# Cautions
To prevent blur during bulb photography, mount the camera on a tripod and use a remote
cable (P. 102).
The following functions are not available during bulb shooting:
Sequential shooing/self-timer shooting/AE bracket shooting/image stabilizer/
ash bracketing
Noise in images
While shooting at slow shutter speeds, noise may appear on-screen. These phenomena
are caused when current is generated in those sections of the image pickup device that
are not normally exposed to light, resulting in a rise in temperature in the image pickup
device or image pickup device drive circuit. This can also occur when shooting with a high
ISO setting in a high-temperature environment. To reduce this noise, the camera activates
the noise reduction function. [Noise Reduct.]: g “Customizing camera settings” (P. 81)
54
EN
Other shooting options
2
Taking Panoramas
If you have installed the supplied computer software, you can use it to join pictures
together to form a panorama. g “Using OLYMPUS Viewer 2/[ib]” (P. 73)
Taking pictures for a panorama
1
Rotate the mode dial to SCN.
2
Select [Panorama] and press Q.
3
Use FGHI to choose a pan direction.
4
Take a picture, using the guides to frame the
shot.
Focus, exposure, and other settings are xed at the
values for the rst shot.
250250 F5.6 38
M
ISO
200
5
Take the remaining images, framing each shot so that the guides overlap
with the previous picture.
[
2
]
250250 F5.6 38
M
ISO
200
[
3
]
Exit Exit
A panorama may include up to 10 images. A warning indicator (g) is displayed after
the tenth shot.
6
After taking the last shot, press Q to end the series.
# Cautions
During panorama shooting, the image previously taken for position alignment will not be
displayed. With the frames or other markers for display in the images as a guide, set the
composition such that the edges of the overlapping images overlap within the frames.
$ Notes
Pressing Q before shooting the rst frame returns to the scene mode selection menu.
Pressing Q in the midst of shooting ends the sequence of panorama shooting, and allows
you to continue with the next one.
55
EN
Other shooting options
2
3D Photography
Take 3D photographs. The results can be viewed on devices that support 3D display.
The camera monitor can not be used to view images in 3D.
1
Rotate the mode dial to SCN.
2
Select [3D Photo] and press Q.
3
Press the shutter button to take the rst shot
and keep the shutter button in this position.
Focus and exposure are locked at the values for the
rst shot.
Cancel
Line up the image.
4
Move the camera horizontally without rotation until the rst shot is
superimposed on your subject. The camera will take the second shot
automatically.
Do not adjust focus or zoom.
If the camera does not take the second shot automatically or if you released the
shutter button before the second shot was taken, press the shutter button all the way
down again.
5
The two images are combined automatically.
If the camera displays the message [3D photo was not created.], take the photograph
again. The two shots are saved to separate les.
# Cautions
Adjusting zoom after the rst shot is taken cancels the rst shot.
The camera focuses on the subject in the center focus point only.
Image size is xed at 1920 × 1080.
3D and manual focus lenses can not be used.
Depending on the lens and camera settings, the 3D effect may not be visible.
The camera will not go to sleep during 3D photography.
RAW photography is not available.
Frame coverage is not 100%.
$ Notes
To retake the photograph after taking the rst shot, press D. Press Q to save the rst
shot and exit without recording a 3D image.
56
EN
Other shooting options
2
Recording multiple exposures in a single image
(multiple exposure)
Record multiple exposures in a single image, using the option currently selected for
image quality.
1
Select [Multiple Exposure] in shooting menu X (P. 107).
2
Adjust settings.
Frame Select [2f].
Auto Gain
When set to [On], the brightness of each
frame is set to 1/2 and the images are
overlaid. When set to [Off], the images
are overlaid with the original brightness
of each frame.
Overlay
When set to [On], a RAW image
recorded on a card can be overlaid with
multiple exposures and stored as a
separate image. The number of pictures
taken is one.
a is displayed in the monitor while multiple exposure
is in effect.
3
Take pictures.
a is displayed in green when shooting starts.
Press D to delete the last shot.
The previous shot is superimposed on the view through
the lens as a guide to framing the next shot.
250 F5.6
ISO
400
L
N
0.00.0
01:02:0301:02:03
3838
P
HD
% Tips
To overlay 3 or more frames: Select RAW for [K] and use the [Overlay] option to make
repeated multiple exposures.
For more information on overlaying RAW images: g “Image overlay” (P. 68)
# Cautions
The camera will not go to sleep while multiple exposure is in effect.
Photographs taken with other cameras can not be included in a multiple exposure.
When [Overlay] is set to [On], the images displayed when a RAW image is selected are
developed with the settings at the time of shooting.
To set the shooting functions, cancel multiple exposure shooting rst. Some functions
cannot be set.
Multiple exposure is cancelled automatically from the rst picture in the following
situations.
The camera is turned off/The q button is pressed/The MENU button is pressed/The
shooting mode is set to a mode other than P, A, S, M/The battery power runs out/
Any cable is connected to the camera/You switch between the monitor and electronic
view nder
When a RAW image is selected using [Overlay], the JPEG image for the image recorded
in JPEG+RAW is displayed.
When shooting multiple exposures using bracketing, priority is given to multiple exposure
shooting. While the overlay image is being saved, bracketing is reset to the factory default
setting.
Multiple Exposure
Frame
Auto Gain
Overlay Off
Off
Off
Set
Back
Multiple Exposure
Frame
Auto Gain
Overlay Off
Off
Off
Set
Back
57
EN
Other shooting options
2
Varying settings over a series of photographs
(bracketing)
“Bracketing” refers to the act of varying settings automatically over a series of shots or
a series of images to “bracket” the current value. Bracketing is available in P, A, S,
and M modes.
1
Select [Bracketing] in shooting menu X
(P. 107).
2
1
Off
w
0.0
oj/Y
Back
Shooting Menu 2
Image Stabilizer
Bracketing
Multiple Exposure
#
RC Mode
Digital Tele-converter
Off
Off
Off
Set
2
Choose a bracketing type.
0 is displayed in the monitor.
AE BKT
WB BKT
FL BKT
ISO BKT
ART BKT
--
--
--
--
A-- G--
Bracketing
Back
Set
AE BKT (AE bracketing)
The camera varies exposure by 0.3 EV, 0.7 EV, or 1.0 EV over three shots. In single-frame
shooting mode, one photograph is taken each time the shutter button is pressed all the way
down, while in sequential shooting mode the camera continues to take shots in the following
order while the shutter button is pressed all the way down: no modi cation, negative, positive.
Number of shots: 2, 3, 5, or 7
The 0 indicator turns green during bracketing.
The camera modi es exposure by varying aperture and
shutter speed (mode P), shutter speed (modes A and M),
or aperture (mode S).
The camera brackets the value currently selected for
exposure compensation.
The size of the bracketing increment changes with the
value selected for [EV Step]. g “Customizing camera
settings” (P. 81)
AE BKT
WB BKT
FL BKT
ISO BKT
ART BKT
--
--
--
--
A-- G--
2f 0.7EV
2f 0.3EV
2f 1.0EV
3f 0.3EV
3f 0.7EV
3f 1.0EV
Off
Bracketing
Back
Set
WB BKT (WB bracketing)
Three images with different white balances (adjusted in speci ed color directions) are
automatically created from one shot, starting with the value currently selected for white
balance.
White balance can be varied by 2, 4, or 6 steps on each of
the A – B (Amber – Blue) and G – M (Green – Magenta) axes.
The camera brackets the value currently selected for white
balance compensation.
No pictures will be taken during WB bracketing if there is
not enough memory on the card for the selected number of
frames.
A-B G-M
WB BKT
3f 4Step 3f 4Step
Back Set
58
EN
Other shooting options
2
FL BKT (FL bracketing)
The camera varies ash level over three shots (no modi cation on the rst shot, negative on
the second, and positive on the third). In single-frame shooting, one shot is taken each time
the shutter button is pressed; in sequential shooting, all shots are taken while the shutter
button is pressed.
The 0 indicator turns green during bracketing.
The size of the bracketing increment changes with the
value selected for [EV Step]. g “Customizing camera
settings” (P. 81)
AE BKT
WB BKT
FL BKT
ISO BKT
ART BKT
--
--
--
--
A-- G--
3f 0.7EV
3f 0.3EV
3f 1.0EV
Off
Bracketing
Back
Set
ISO BKT (ISO bracketing)
The camera varies sensitivity by 0.3 EV, 0.7 EV, or 1.0 EV over three shots (no modi cation
on the rst shot, negative on the second, and positive on the third), bracketing the current
sensitivity setting (or if auto sensitivity is selected, the optimal sensitivity setting) while
keeping shutter speed and aperture xed. In single-frame shooting, one shot is taken each
time the shutter button is pressed; in sequential shooting, all shots are taken while the shutter
button is pressed.
The size of the bracketing increment does not change with
the value selected for [ISO Step].
g “Customizing camera settings” (P. 81)
Bracketing is performed regardless of the upper limit set
with [ISO-Auto Set]. g “Customizing camera settings”
(P. 81)
AE BKT
WB BKT
FL BKT
ISO BKT
ART BKT
--
--
--
--
A-- G--
3f 0.7EV
3f 0.3EV
3f 1.0EV
Off
Bracketing
Back
Set
ART BKT (ART bracketing)
Each time the shutter is released, the camera records multiple images, each with a different
art lter settiing. You can turn art lter bracketing on or off separately for each picture mode.
Recording may take some time.
ART BKT can not be combined with WB BKT or ISO BKT.
ART BKT
Pop Art
Light Tone
Off
Off
Off
Off
Off
Pin Hole
Diorama
Off
OffSoft Focus
Pale&Light Color
Grainy Film
Back
Set
Off
On
Digital Zoom (Digital Tele-converter)
Digital Tele-converter is used to zoom in beyond the current zoom ratio. The camera
saves the center crop. Zoom is increased by about 2×.
1
Select [On] for [Digital Tele-converter] in Shooting menu X (P. 107).
2
The view in the monitor will be enlarged by a factor of two.
The subject will be recorded as it appears in the monitor.
# Cautions
Digital zoom is not available with multiple exposures or when T, s, f, w, or m is
selected in SCN mode.
When a RAW image is displayed, the area visible in the monitor is indicated by a frame.
59
EN
Flash shooting
3
3
The built-in ash can be set manually as required. The built-in ash can be used for
ash photography in a variety of shooting conditions.
Using a ash ( ash photography)
1
Press the ash switch to raise the ash.
2
Press the # button (I) to display options.
3
Use HI to choose a ash mode and press Q.
The options available and the order in which they are displayed vary depending on
the shooting mode. g “Flash modes that can be set by shooting mode” (P. 104)
AUTO Auto ash
The ash res automatically in low light or
backlight conditions.
#
Fill-in ash
The ash res regardless of the light
conditions.
$
Flash off The ash does not re.
!/
#!
Red-eye reduction ash
This function allows you to reduce the red-
eye phenomenon. In S and M mode, the
ash always res.
#SLOW
Slow synchronization
(1st curtain)
Slow shutter speeds are used to brighten
dimly-lit backgrounds.
!SLOW
Slow synchronization
(1st curtain)/Red-eye
reduction ash
Combines slow synchronization with red-eye
reduction.
#SLOW2/
2nd
Curtain
Slow synchronization
(2nd curtain)
The ash res just before
the shutter closes to
create trails of light behind
moving light sources.
#FULL,
#1/4 etc.
Manual For users who prefer manual operation.
4
Press the shutter button all the way.
# Cautions
In [!/#!(Red-eye reduction ash)], after the pre- ashes, it takes about 1 second
before the shutter is released. Do not move the camera until shooting is complete.
[!/#!(Red-eye reduction ash)] may not work effectively under some shooting
conditions.
When the ash res, the shutter speed is set to 1/180 sec. or slower. When shooting
a subject against a bright background with the ll-in ash, the background may be
overexposed.
Flash shooting
60
EN
Flash shooting
3
Adjusting ash output (Flash intensity control)
Flash output can be adjusted if you nd that your subject to appears overexposed, or is
underexposed even though the exposure in the rest of the frame is just right.
1
Display the live control (P. 20) and select the
Flash intensity control item using FG.
2
Choose the compensation value with HI and
press Q.
ISO
AUTO
ISOISOISO
AUTOAUTOAUTO
P
RR
S-AFS-AF
00
OFFOFF
0.0
% Tips
For information on ash bracketing: g “FL BKT (FL bracketing)” (P. 58)
# Cautions
This does not work when the ash control mode on the electronic ash is set to MANUAL.
If ash intensity is adjusted on the electronic ash, it will be combined with the camera’s
ash intensity setting.
When [w+F] is set to [On], the ash intensity value will be added to the exposure
compensation value. g “Customizing camera settings” (P. 81)
Using external ash units designated for use with this
camera
Optional external ash units designated for use with this camera support a wide variety
of options for ash photography, including automatic ash control, super FP, and
wireless ash control (P. 93).
Other external ash units
Observe the following precautions when mounting an external ash unit not designated
for use with this camera on the camera hot shoe:
Using obsolete ash units that apply currents of more than about 24 V to the camera hot
shoe X-contact will damage the camera.
Connecting ash units with signal contacts that do not conform to Olympus speci cations
may damage the camera.
Use only with the camera in shooting mode M at shutter speeds slower than 1/180 s and
at ISO settings other than [AUTO].
Flash control can only be performed by manually setting the ash to the ISO sensitivity
and aperture values selected with the camera. Flash brightness can be adjusted by
adjusting either ISO sensitivity or aperture.
Use a ash with an angle of illumination suited to the lens. Angle of illumination is usually
expressed using 35-mm format equivalent focal lengths.
61
EN
Shooting and viewing movies
4
4
Use the R button to record High De nition (HD) movies with sound. In movie mode,
you can create movies that take advantage of the effects available in modes A and M.
Changing the settings for movie recording
Adding effects to a movie
1
After selecting n mode, display the live control
(P. 20) and use FG to highlight the shooting
mode.
2
Use HI to choose a mode and press Q.
PP
PP
WB
AUTO
WBWBWB
AUTOAUTOAUTO
n
PP
AA SS MM
IS OFFIS OFF
PP
ISO
AUTO
ISOISOISO
AUTOAUTOAUTO
S-AFS-AF
HD
Program Auto
P
Optimal aperture is set automatically according to the brightness of
the subject.
A
Depiction of background is changed by setting the aperture. Use a
dial to choose the aperture.
S
Shutter speed affects how the subject appears. Use a dial to select
the shutter speed. Shutter speed can be set to values between 1/30 s
and 1/4000 s.
M
You control both aperture and shutter speed. Use the sub dial to
choose the aperture, the main dial to choose the shutter speed.
Shutter speed can be set to values between 1/30 s and 1/4000 s.
Sensitivity can be set manually to values between ISO 400 and 1600;
auto ISO sensitivity control is not available.
ART1 – ART10
Movie can be recorded with effects of art lter mode.
g “Using art lters” (P. 16)
# Cautions
When recording a movie, you cannot change the settings for exposure compensation,
aperture value, and shutter speed.
If [Image Stabilizer] is activated while recording a movie, the recorded image is enlarged
slightly. Even if [Vertical IS] or [Horizontal IS] is selected, the setting for [Auto] is applied.
Stabilization is not possible when the camera shake is excessive.
When using a lens with the image stabilizer function, turn off the image stabilizer function
of either the lens or the camera.
When the inside of the camera becomes hot, shooting is automatically stopped to protect
the camera.
With some art lters, [C-AF] operation is limited.
Cards with an SD speed class of 6 or above are recommended for movie recording.
Shooting and viewing movies
62
EN
Shooting and viewing movies
4
Movie sound options (recording sound with movies)
1
Display the live control (P. 20) and select the
Movie R item using FG.
2
Switch ON/OFF using HI and press Q.
ONON
RR
n
RR
RR
OFFOFF
ONON
Movie
R
On
# Cautions
When recording sound in a movie, the sound made by the lens and camera operating
may be recorded. If desired, you can reduce these sounds by shooting with [AF Mode] set
to [S-AF], or by limiting the amount of times you press the buttons.
No sound is recorded in [ART7] (Diorama) mode.
Viewing movies
1
Display a movie in single-frame playback and
press Q.
2
Select [Movie Play] using FG and press Q to
begin playback.
The following operations can be performed during
movie playback:
m
Movie
Back
Movie Play
Erase
Set
Q
Pause or resume playback.
While playback is paused, press F to
display the rst frame and press G to
display the last frame. Press H I to
rewind or advance one frame. Press and
hold the button to rewind or advance in
succession.
00:00:02/00:00:14
Elapsed time/Total
recording time
H/I
Advance or rewind a movie.
F/G
Adjust volume.
% Tips
Recording movies with the shutter button: g “Recording movies with the shutter button”
(P. 92)
Recording longer movies (when you don’t need to record in HD): g “Choosing a record
mode” (P. 47)
Reducing wind noise: g “Microphone set (SEMA–1)” (P. 102)
63
EN
Playback options
5
5
Single-frame playback
Press the q button to view pictures full frame.
2011.05.01 12:30 20
100-0020
L
N
2011.05.01 12:30 15
100-0015
4
:
3
L
N
250250 F5.6
01:02:0301:02:03
3838
L
N
P
0.00.0
ISO
400
HD
Shooting modeOLYMPUS PENPAL
connected
Images on
memory card
q
q
q
q
q
q
To exit to shooting mode, press the shutter button halfway.
The following operations can be performed in full-frame playback.
H/I or j
View other pictures.
D
Erase the current picture (P. 15).
U or r
Zoom in on pictures (P. 14).
G or q
View Index display.
INFO
View information on the current picture (P. 33).
R
Select pictures. Selected pictures are shown by v.
Fn2
Protect the current picture (P. 15).
Q
Display the menus.
JPEG Edit, RAW Data Edit, 0, R, Rotate, m, Erase
Index display/calendar display
Index display
To view multiple pictures, press the G button in full-frame playback.
Calendar display
Display the rst picture taken on each date.
Playback options
64
EN
Playback options
5
2011.05.01 12:30 20
4 frames
2011.05.01 12:30 20
100-0020
L
N
Single-frame
playback
2011.5
Sun Mon Tue Wed Thu Fri Sat
25 26 27 28 29 30 1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30 31 1 2 3
25 26 27 28 29 30 1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30 31 1 2 3
Calendar display
9–100 frames
2011.05.01 12:30 20
2011.05.01 12:30 20
Index display
Q
Q/r/U
G/q
U/r
G/q
U/r
G/q
Only items for which [On] is selected are displayed.
[G/Info Settings]: g “Customizing camera settings” (P. 81)
G or q
Increase the number of pictures displayed from 4 to 9, 25, or 100. Press
G again to view the calendar display.
U or r
Decrease the number of pictures displayed from 100 to 25, 9, or 4. Press
U again to view the current image full frame.
F/G/H/I
or j
Select a picture.
R
Select pictures. Selected pictures are shown by v.
Q
Index display
The menus are displayed.
Calendar display
View the pictures taken on the selected date full frame.
Playback zoom (close-up playback)
Besides normal close-up playback, you can also quickly zoom in on images and
view other frames at the current zoom ratio (zoom paging) if [mode2] is selected for
[q Close Up Mode]. g “Customizing camera settings” (P. 81)
2x
20
Zoom frame
2011.05.01 12:30 20
100-0020
L
N
Single-frame
playback
20
2x
View other pictures
(zoom paging)
2x
Scroll
Close-up playback
U/INFO
U
U
G/q
U/
INFO
U/
INFO
F/G/H/I
Position the zoom frame. In zoom paging, use HI to view other
pictures at the current zoom ratio.
U
View the frame at the selected zoom ratio. Press again to zoom in.
INFO
Choose between zoom frame, zoom scroll, and zoom paging.
G or q
Exit to single-frame playback.
65
EN
Playback options
5
Selecting images
Select multiple pictures for protection or deletion. Press
the R button to select the current picture. Selected
pictures are marked with v. To remove v and deselect
the picture, press the R button again.
Multiple pictures can be selected in index playback.
2011.05.01 12:30 21
Canceling all protections
This function lets you cancel the protection of several images at one time.
1
Select [Reset Protect] in the q (playback) menu (P. 107).
2
Select [Yes] and press Q.
All-frame erase
Erase all images on the memory card.
1
Select [Card Setup] in shooting menu W (P. 107).
2
Select [All Erase] and press Q.
The [Format] option (P. 99) can be used to delete non-image data.
3
Select [Yes] and press Q.
Rotate
Choose whether to rotate photographs.
1
Play the photograph back and press Q.
2
Select [Rotate] and press Q.
3
Press F to rotate the image counterclockwise, G to rotate it clockwise;
the image rotates each time the button is pressed.
Press Q to save settings and exit.
The rotated image is saved in its current orientation.
Movies, 3D photos, and protected images can not be rotated.
% Tips
If [On] is selected for [R] (P. 107) in the q (playback) menu, images will be displayed in
the new orientation during playback.
66
EN
Playback options
5
Slideshow
This function displays images stored on the card one after another.
1
Press Q during playback and select the
slideshow option.
JPEG
m
R
<
Rotate
JPEG Edit
Back
Set
2
Adjust settings.
Start Start the slideshow. Images are displayed in order, starting with the
current picture.
BGM Set BGM (4 types) or turn BGM [Off].
Effect * Choose the transition between frames. This option can be used
when slideshows are displayed on external devices using HDMI.
Slide Set type of slideshow to execute.
Slide Interval Choose the length of time each slide is displayed from 2 to 10
seconds.
Movie Interval Select [Full] to include full-length movie clips in the slideshow,
[Short] to include only the opening portion of each clip.
The only effect available for movies is [Fade].*
3
Select [Start] and press Q.
The slideshow will start.
Press Q to stop the slideshow.
Volume
Press FG during the slideshow to adjust the overall volume of the camera speaker.
Press HI to adjust the balance between the background music and the sound recorded
with photographs or movies.
67
EN
Playback options
5
Editing still images
Recorded images can be edited and saved as new images.
1
Display the image to be edited and press Q.
[RAW Data Edit] is displayed if the picture is a RAW image, [JPEG Edit] if it is a JPEG
image. If the image was recorded in RAW+JPEG format, the copy that will be edited
is determined by your choice of [Edit] option.
2
Select [RAW Data Edit] or [JPEG Edit] and press Q.
RAW Data
Edit
Create a JPEG copy of a RAW image. The JPEG copy is processed
using the settings currently stored in the camera. Adjust camera
settings before choosing this option.
JPEG Edit
Choose from the following options:
[Shadow Adj]: Brightens a dark backlit subject.
[Redeye Fix]: Reduces the red-eye phenomenon during ash shooting.
[P]: Use the main dial to choose
the size of the crop and FGHI to
position the crop.
O
Set
[Aspect]: Changes the aspect ratio of images from 4:3 (standard) to
[3:2], [16:9], [6:6], or [3:4]. After changing the aspect ratio, use the
arrow pad to specify the trimming position.
[Black & White]: Creates black and white images.
[Sepia]: Creates sepia-toned images.
[Saturation]: Sets the color depth. Adjust the color saturation checking
the picture on the screen.
[Q]: Converts the image le size to 1280 × 960, 640 × 480, or
320 × 240. Images with an aspect ratio other than 4:3 (standard) are
converted to the closest image le size.
[e-Portrait]: Makes skin look smooth and translucent. You may not be
able to compensate depending on the image if face detection fails.
# Cautions
Movies and 3D photos can not be edited.
Red-eye correction may not work depending on the image.
Editing of a JPEG image is not possible in the following cases:
When an image is recorded in RAW, when an image is processed on a PC, when
there is not enough space in the card memory, when an image is recorded on another
camera.
When resizing ([Q]) an image, you cannot select a larger number of pixels than was
originally recorded.
[P] and [Aspect] can only be used to edit images with an aspect ratio of 4:3 (standard).
68
EN
Playback options
5
Image overlay
Up to 3 frames of RAW images taken with the camera can be overlaid and saved as a
separate image. The image is saved with the record mode set at the time the image is
saved. (If [RAW] is selected, the copy will be saved in [YN+RAW] format.)
1
With a RAW image displayed during playback, press Q and select
[Image Overlay].
2
Select the number of images in the overlay and press Q.
3
Use FGHI to select the RAW images that
will be used in the overlay and press
Q
to
select.
When you have selected the number of images
speci ed in Step 2, the overlay will be displayed.
RAW RAW RAW
RAW
RAW RAW RAW
Image Overlay
Back
Set
4
Adjust gain.
Use HI to select an image and use FG to adjust
gain.
Gain can be adjusted in the range 0.1 2.0. Check the
results in the monitor.
Image Overlay
Back
Set
×1.5×1.5×0.3 ×0.5
5
Press Q. A con rmation dialog will be displayed; select [Yes] and press
Q.
% Tips
To overlay 4 or more frames, save the overlay image as a RAW le and use
[Image Overlay] repeatedly.
Audio recording
Add an audio recording (up to 30 sec. long) to the current photograph.
1
Display the image to which you want to add an
audio recording and press Q.
Audio recording is not available with protected images.
Audio recording is also available in the playback menu.
2
Select [R] and press Q.
To exit without adding a recording, select [No].
JPEG
m
R
<
Rotate
JPEG Edit
Back Set
3
Select [R Start] and press Q to begin
recording.
To stop recording part-way through, press Q.
4
Press Q to end recording.
Images with audio recordings are indicated by a H
icon.
To delete a recording, select [Erase] in Step 2.
R
R
Start
No
Erase
Back Set
69
EN
Playback options
5
Viewing camera images on TV
Use the AV cable provided with the camera to playback recorded images on your TV.
You can playback high-de nition images on a high-de nition TV by connecting it to the
camera using a commercially available HDMI mini-cable.
Connection via AV cable
Connect to the TV
video input jack
(yellow) and audio
input jack (white).
Multi-connector
AV cable
(included)
1
Use the camera to select the video signal format that matches that of the
connected TV ([NTSC]/[PAL]).
[Video Out]: g “Customizing camera settings” (P. 81)
2
Connect the TV and camera.
3
Turn on the TV, and change “INPUT” to “VIDEO”(an input jack connected
to the camera).
# Cautions
The camera’s monitor turns off automatically when the AV cable is connected to the
camera.
Press the q button when connecting via an AV cable.
For details on changing the input source of the TV, refer to the TV’s instruction manual.
Depending on the TV’s settings, the displayed images and information may become
cropped.
Connection via HDMI mini-cable
Connect to the HDMI
connector on the TV.
HDMI
mini-connector
HDMI mini-cable
(commercially available)
70
EN
Playback options
5
1
Connect the camera to the TV using the HDMI mini-cable.
2
Turn on the TV and switch “INPUT” to “HDMI INPUT”.
3
Turn on the camera.
# Cautions
For details on changing the input source of the TV, refer to the TV’s instruction manual.
Use an HDMI mini-cable that matches the HDMI mini connector on the camera and the
HDMI connector on the TV.
When the camera and TV are connected by both an AV cable and an HDMI mini-cable,
HDMI will take priority.
Depending on the TV’s settings, the displayed images and information may become
cropped.
When you connect to a TV via an HDMI mini-cable, you can select the format of the digital
video signal. Choose a format that matches the input format selected with the TV.
[HDMI]: g “Customizing camera settings” (P. 81)
1080i Priority is given to 1080i HDMI output.
720p Priority is given to 720p HDMI output.
480p/576p
480p/576p HDMI output. 576p is used when [PAL] is selected for
[Video Out].
You cannot shoot pictures or movies when the HDMI cable is connected.
Do not connect the camera to other HDMI output devices. Doing so may damage the
camera.
HDMI output is not performed while connected via USB to a computer or printer.
Using the TV remote control
The camera can be operated by a TV remote control when connected to a TV that supports
HDMI control.
1
Select [HDMI] in c Custom Menu (P. 81) tab U.
2
Select [HDMI Control] and choose [On].
3
Operate the camera by using the TV remote control.
You can operate the camera by following the operation guide displayed on the TV.
During single-frame playback, you can display or hide the information display by
pressing the “Red” button, and display or hide the index display by pressing the
“Green” button.
Some televisions may not support all features.
71
EN
Sending and receiving images
6
6
The optional OLYMPUS PENPAL can be used to upload pictures to, and receive
pictures from, Bluetooth devices or other cameras connected to an OLYMPUS
PENPAL. Visit the OLYMPUS website for more information on Bluetooth devices.
Before sending or receiving images, select [On] for [c/# Menu Display] > [# Menu
Display] to make the accessory port menu accessible.
Sending images
Resize and upload JPEG images to another device. Before sending images, make
sure that the receiving device is set to the mode for receiving data.
1
Display the picture you wish to send full frame and press Q.
2
Select [Send A Picture] and press Q.
Select [Search] and press Q in the next dialog.
Bluetooth devices in range, or in [Address Book] will be
displayed.
JPEG
Erase
Send A Picture
Back
Set
3
Select the destination and press Q.
The image will be uploaded to the receiving device.
If prompted to provide a PIN code, enter 0000 and
press Q.
Send Picture
Sending
Cancel
Receiving images/adding a host
Connect to the transmitting device and download JPEG images.
1
Select [OLYMPUS PENPAL Share] in the A tab
of the accessory port menu (P. 90).
2
Select [Please Wait] and press Q.
Perform operations for sending images on the sending
device.
Transmission will start and a [Receive Picture Request]
dialog will be displayed.
#
2
1
c
OLYMPUS PENPAL Share
OLYMPUS PENPAL Album
Electronic Viewfinder
Back
Accessory Port Menu
Set
3
Select [Accept] and press Q.
The image will be downloaded to the camera.
If prompted to provide a PIN code, enter 0000 and
press Q.
% Tips
To resize images to be transmitted or choose how long
the camera searches for a destination: g “Customizing
camera settings” (P. 81)
Receive Picture
Receiving
Cancel
Sending and receiving images
72
EN
Sending and receiving images
6
Editing the address book
The OLYMPUS PENPAL can store host information. You can assign names to hosts or
delete host information.
1
Select [OLYMPUS PENPAL Share] in the A tab
of the accessory port menu (P. 90).
Press I and select [Address Book].
1
Please Wait
Address Book
My OLYMPUS PENPAL
Picture Send Size
Back
Accessory Port A
Set
2
Select [Address List] and press Q.
The names of existing hosts are listed.
3
Select the host you wish to edit and press Q.
Deleting hosts
Select [Yes] and press Q.
Editing host information
Press Q to display host information. To change the host name, press Q again and edit the
current name in the rename dialog.
Creating albums
Your favorite JPEG pictures can be resized and copied to an OLYMPUS PENPAL.
1
Display the picture you wish to copy full frame and press Q.
2
Select [z] and press Q.
To copy images from an OLYMPUS PENPAL to the
memory card, select [y] and press Q.
JPEG
Erase
Back
Send A Picture
Set
% Tips
Choosing the size at which images are copied. [Picture Copy Size]:
Copying all images from the memory card. [Copy All]:
Deleting or formatting albums. [Album Mem. Setup]:
Removing protection from all images in the album. [Reset Protect]:
Viewing album status (amount of memory remaining). [Album Mem. Usage]:
g “Customizing camera settings” (P. 81)
# Cautions
The OLYMPUS PENPAL can be used only in the region in which it was purchased.
Depending on the areas, the usage may infringe the wave regulations and may be subject
to its penalty.
73
EN
Using OLYMPUS Viewer 2/[ib]
7
7
Windows
1
Insert the supplied CD in a CD-ROM drive.
Windows XP
A “Setup” dialog will be displayed.
Windows Vista/Windows 7
An Autorun dialog will be displayed. Click “OLYMPUS
Setup” to display the “Setup” dialog.
# Caution
If the “Setup” dialog is not displayed, select “My Computer” (Windows XP) or
“Computer” (Windows Vista/Windows 7) from the start menu. Double-click the
CD-ROM (OLYMPUS Setup) icon to open the “OLYMPUS Setup” window and then
double-click “LAUNCHER.EXE”.
If a “User Account Control” dialog is displayed, click “Yes” or “Continue”.
2
Follow the on-screen instructions on your computer.
# Caution
If nothing is displayed on the camera screen even after connecting the camera to the
computer, the battery may be exhausted. Use a full-charged battery.
Multi-connector
Smaller
terminal
USB cable
Look for this mark.
USB port
# Caution
When the camera is connected to another device via USB, a message will be
displayed prompting you to choose a connection type. Select [Storage].
3
Register your Olympus product.
Click the “Registration” button and follow the on-screen instructions.
4
Install OLYMPUS Viewer 2 and [ib] computer software.
Check the system requirements before beginning installation.
Click the “OLYMPUS Viewer 2” or “OLYMPUS ib” button and follow the on-screen
instructions to install the software.
Using OLYMPUS Viewer 2/[ib]
74
EN
Using OLYMPUS Viewer 2/[ib]
7
OLYMPUS Viewer 2
Operating System
Windows XP (Service Pack 2 or later) /Windows Vista /
Windows 7
Processor
Pentium 4 1.3 GHz or better
(Pentium D 3.0 GHz or better required for movies)
RAM 1 GB or more (2 GB or more recommended)
Free Hard Drive Space 1 GB or more
Monitor Settings
1024 × 768 pixels or more
Minimum 65,536 colors (16,770,000 colors recommended)
[ib]
Operating System
Windows XP (Service Pack 2 or later) /Windows Vista /
Windows 7
Processor
Pentium 4 1.3 GHz or better
(Pentium D 3.0 GHz or better required for movies)
RAM
512 MB or more (1 GB or more recommended)
(1 GB or more required for movies 2 GB or more
recommended)
Free Hard Drive Space 1 GB or more
Monitor Settings
1024 × 768 pixels or more
Minimum 65,536 colors (16,770,000 colors recommended)
Graphics A minimum of 64 MB video RAM with DirectX 9 or later.
See online help for information on using the software.
Macintosh
1
Insert the supplied CD in a CD-ROM drive.
The disk contents should automatically be displayed in
the Finder. If they are not, double-click the CD icon on
the desktop.
Double-click the “Setup” icon to display the “Setup”
dialog.
2
Install OLYMPUS Viewer 2.
Check the system requirements before beginning
installation.
Click the “OLYMPUS Viewer 2” button and follow the
on-screen instructions to install the software.
OLYMPUS Viewer 2
Operating System Mac OS X v10.4.11–v10.6
Processor Intel Core Solo/Duo 1.5 GHz or better
RAM 1 GB or more (2 GB or more recommended)
Free Hard Drive Space 1 GB or more
Monitor Settings
1024 × 768 pixels or more
Minimum 32,000 colors (16,770,000 colors recommended)
75
EN
Using OLYMPUS Viewer 2/[ib]
7
Other languages can be selected from the language combo box. For information on using
the software, see online help.
# Cautions
AVCHD movie le format is not supported.
Copying pictures to a computer without
OLYMPUS Viewer 2/[ib]
Your camera supports the USB Mass Storage Class. You can transfer images to a
computer by connecting the camera to the computer with the provided USB cable. The
following operating systems are compatible with the USB connection:
Windows: Windows XP Home Edition/
Windows XP Professional/
Windows Vista/Windows 7
Macintosh: Mac OS X version 10.3 or later
1
Turn the camera off and connect it to the computer.
The location of the USB port varies with the computer. For details, refer to your
computer’s manual.
2
Turn on the camera.
The selection screen for the USB connection is
displayed.
3
Press FG to select [Storage]. Press Q.
USB
MTP
Storage
Print
Exit
Set
4
The computer recognizes the camera as a new device.
# Cautions
If your computer is running Windows Vista/Windows 7, select [MTP] in Step 3 to use
Windows Photo Gallery.
Data transfer is not guaranteed in the following environments, even if your computer is
equipped with a USB port.
Computers with a USB port added by means of an extension card, etc.
Computers without a factory-installed OS and home-built computers
Camera controls can not be used while the camera is connected to a computer.
If the dialog shown in Step 2 is not displayed when the camera is connected, select [Auto]
for [USB Mode] in the camera custom menus. g “Customizing camera settings” (P. 81)
76
EN
Printing pictures
8
8
Print reservation (DPOF*)
You can save digital “print orders” to the memory card listing the pictures to be printed
and the number of copies of each print. You can then have the pictures printed at a
print shop that supports DPOF or print the pictures yourself by connecting the camera
directly to a DPOF printer. A memory card is required when creating a print order.
DPOF (Digital Print Order Format) is a standard for recording the data that a printer or
print service requires to automatically print pictures.
Creating a print order
1
Press Q during playback and select [<].
m
2
1
<
Playback Menu
Reset Protect
Edit
Back
Set
2
Select [<] or [
U
] and press Q.
Individual pictures
Press HI to select the frame that you want to set as
print reservation, then press FG to set the number of
prints.
To set print reservation for several pictures, repeat this
step. Press Q when all the desired pictures have been
selected.
<
ALL
Print Order Setting
Back
Set
All pictures
Select [U] and press Q.
3
Select the date and time format and press Q.
No
The pictures are printed without the date
and time.
Date
The pictures are printed with the
shooting date.
Time
The pictures are printed with the
shooting time.
4
Select [Set] and press Q.
# Cautions
The camera can not be used to modify print orders created with other devices. Creating a
new print order deletes any existing print orders created with other devices.
Not all functions may be available on all printers or at all photo labs.
Print orders can not include 3D photos, RAW images, or movies.
When requesting prints without a digital print order, specify the le number. Requesting
prints by frame number may result in the wrong pictures being printed.
*
No
Date
Time
X
Back Set
No
Date
Time
X
Back Set
Printing pictures
77
EN
Printing pictures
8
Removing all or selected pictures from the print order
You can reset all print reservation data or just the data for selected pictures.
1
Press Q during playback and select [<].
2
Select [<] and press Q.
To remove all pictures from the print order, select [Reset] and press Q.
To exit without removing all pictures, select [Keep] and press Q.
3
Press HI to select images you wish to remove from the print order.
Use G to set the number of prints to 0. Press Q once you have removed all the
desired pictures from the print order.
4
Select the date and time format and press Q.
This setting is applied to all frames with print reservation data.
5
Select [Set] and press Q.
Direct printing (PictBridge)
By connecting the camera to a PictBridge-compatible printer with the USB cable, you
can print out recorded pictures directly.
1
Connect the camera to the computer using the supplied USB cable and
turn the camera on.
USB port
Smaller
terminal
USB cable
Multi-connector
Use a fully charged battery for printing.
When the camera is turned on, a dialog should be displayed in the monitor prompting
you to choose a host. If it is not, select [Auto] for [USB Mode] in the camera custom
menus. g “Customizing camera settings” (P. 81)
2
Use FG to select [Print].
[One Moment] will be displayed, followed by a print-
mode selection dialog.
If the screen is not displayed after a few minutes,
disconnect the USB cable and start again from Step 1.
USB
MTP
Storage
Print
Exit
Set
Proceed to “Custom printing” (P. 78).
# Cautions
3D photos, RAW images, and movies can not be printed.
78
EN
Printing pictures
8
Easy printing
Use the camera to display the picture you wish to print before connecting the printer
via the USB cable.
1
Use HI to display the pictures you want to
print on the camera.
2
Press I.
The picture selection screen appears when printing is
completed. To print another picture, use HI to select
the image and press Q.
To exit, unplug the USB cable from the camera while
the picture selection screen is displayed.
PC/Custom Print
Easy Print Start
Custom printing
1
Follow the operation guide to set a print option.
Selecting the print mode
Select the type of printing (print mode). The available print modes are as shown below.
Print Prints selected pictures.
All Print
Prints all the pictures stored in the card and makes one print for
each picture.
Multi Print
Prints multiple copies of one image in separate frames on a single
sheet.
All Index Prints an index of all the pictures stored in the card.
Print Order
Prints according to the print reservation you made. If there is no
picture with print reservation, this is not available.
Setting the print paper items
This setting varies with the type of printer. If only the printer’s STANDARD setting is
available, you cannot change the setting.
Size Sets the paper size that the printer supports.
Borderless
Selects whether the picture is printed on the entire page or inside a
blank frame.
Pics/sheet
Selects the number of pictures per sheet. Displayed when you have
selected [Multi Print].
79
EN
Printing pictures
8
Selecting pictures you want to print
Select pictures you want to print. The selected pictures
can be printed later (single-frame reservation) or the
picture you are displaying can be printed right away.
Print More
Select Single Print
2011.05.01 12:30 15
123-3456
Print (f)
Prints the currently displayed picture. If there is a picture that [Single
Print] reservation has already been applied to, only that reserved
picture will be printed.
Single Print
(t)
Applies print reservation to the currently displayed picture. If you
want to apply reservation to other pictures after applying [Single
Print], use HI to select them.
More (u)
Sets the number of prints and other items for the currently displayed
picture, and whether or not to print it. For operation, refer to “Setting
printing data” in the next section.
Setting printing data
Select whether to print printing data such as the date and time or le name on the picture
when printing. When the print mode is set to [All Print] and [Option Set] is selected, the
following options appears.
<×
Sets the number of prints.
Date Prints the date and time recorded on the picture.
File Name Prints the le name recorded on the picture.
P
Trims the picture for printing. Set the trimming size with the U or G
button and the trimming position with FGHI.
2
Once you have set the pictures for printing and printing data, select
[Print], then press Q.
To stop and cancel printing, press Q. To resume printing, select [Continue].
Cancelling printing
To cancel printing, highlight [Cancel] and press Q. Note that any changes to the print order
will be lost; to cancel printing and return to the previous step, where you can make changes
to the current print order, press MENU.
80
EN
Camera setup
9
9
Setup Menu
Use the Setup Menu to set the basic camera functions.
For details on using the menu lists, see “Using the
menus” (P. 21).
--.--.-- --:--X
W
j
±0
k
±0
2
1
Setup Menu
English
5sec
c
/
#
Menu Display
Firmware
Rec View
Back
Set
Option Description
g
X
(Date/time
setting)
Set the camera clock.
7
W
(Changing
the display
language)
You can change the language used for the on-screen display and
error messages from English to another language.
i
(Monitor
brightness
adjustment)
You can adjust the brightness and
color temperature of the monitor. Color
temperature adjustment will affect only
the monitor display during playback.
Use HI to highlight j (color
temperature) or k (brightness) and
FG to adjust the value.
-
2
j
+1
k
Natural
Back Set
Press the INFO button to switch between [Natural] and [Vivid]
monitor color display. For information on adjusting the brightness
and color temperature of the electronic view nder, see [EVF Adjust]
(P. 90).
Rec View Choose whether pictures are displayed immediately after shooting
and for how long. This is useful for making a brief check of the
picture you have just taken. Pressing the shutter button halfway
while checking the picture lets you resume shooting immediately.
[1sec] [20sec]: Selects the number of seconds to display each
picture. Can be set in units of 1 second.
[Off]: The picture being recorded to the card is not
displayed.
[Autoq]: Displays the image being recorded, and then
switches to playback mode. This is useful for
erasing a picture after checking it.
c/#
Menu
Display
Choose whether to display the custom menus or accessory port
menu.
81
Firmware Your product’s rmware version will be displayed. When you make
inquiries about your camera or accessories or when you want to
download software, you will need to state which version of each of
the products you are using.
Camera setup
81
EN
Customizing camera settings
10
10
Camera settings can be customized using the custom and accessory menus.
The c Custom menu is used to ne-tune camera settings. The # Accessory Port
menu is used to adjust settings for accessory port devices.
Before Using the Custom/Accessory Port Menus
The Custom and Accessory Port menus are only available when the appropriate option is
selected for the [c/# Menu Display] item in the setup menu.
1
Press the MENU button to display the menus.
2
Select the
d
setup menu tab (P. 80) using FG and press I.
3
Select [c/# Menu Display] using FG and
press I.
4
Select the desired menu using FG and press
I.
5
Select [On] using FG and press Q.
The selected menu will be displayed.
X
W
j
±0
k
±0
11.05.01 14:01
2
1
Setup Menu
English
5sec
c
/
#
Menu Display
Firmware
Rec View
Back
Set
c
Menu Display
On
Back
Set
Q
X
W
j
±0
k
±0
11.05.01 14:01
2
1
c
Setup Menu
English
5sec
c
/
#
Menu Display
Firmware
Rec View
Back
Set
[c] tab
Custom Menu options
R AF/MF
MENU
c
R
Option Description
g
AF Mode Choose the AF mode. 36
Full-time AF If [On] is selected, the camera will continue to focus even
when the shutter button is not pressed halfway.
AF Area Choose the AF target mode. 37
P Set Up
Choose the roles played by the dials and arrow pad during
AF target selection.
Reset Lens When set to [On], this resets the focus of the lens (in nity)
each time the power is turned off.
Bulb Focusing Normally focus locks during the exposure when manual
focus (MF) is selected. Select [On] to allow focusing using
the focus ring.
Customizing camera settings
82
EN
Customizing camera settings
10
Option Description
g
Focus Ring You can customize
how the lens adjusts
to the focal point by
selecting the rotational
direction of the focus
ring.
)
NearNear
)
MF Assist Select [On] to automatically magnify the image for precise
focus when the focus ring is rotated in manual focus mode.
P Set Home
Choose the AF target position that will be saved as the
home position. p appears in the AF target selection
display while you choose a home position.
AF Illuminat. Select [Off] to disable the AF illuminator.
I Face Priority
The camera gives priority to the faces or pupils of human
portrait subjects during focusing. The camera zooms in on
faces during close-up playback.
39
S Button/Dial
MENU
c
S
Option Description
g
AEL/AFL
Assign focus or AE lock to the Fn1 or R button when the
button function is set to [AEL/AFL].
88
AEL/AFL Memo If [Off] is selected, exposure will lock only while the button
is pressed.
41
Button Function Choose the function assigned to the selected button.
U Function F, AEL/AFL, R REC, Preview, k, P Home, MF,
RAWK, Test Picture, Myset, Backlit LCD, IS Mode,
Live Guide, Digital Tele-converter, Off
89
V Function
R Function
I Function F, #, jY, ISO, WB, d Lock
G Function
Dial Function Choose the roles played by the main and sub dials. You
can also use the MENU button to choose dial rotation and
cursor movement directions.
Dial Direction Choose the direction in which the dials are rotated to adjust
shutter speed or aperture or to move the cursor.
d Lock
Select [On] to disable the dials in shooting mode.
R AF/MF
MENU
c
R
83
EN
Customizing camera settings
10
T Release
MENU
c
T
Option Description
g
Rls Priority S If [On] is selected, the shutter can be released even when
the camera is not in focus. This option can be set separately
for S-AF (P. 36) and C-AF (P. 36) modes.
Rls Priority C
U Disp/8/PC
MENU
c
U
Option Description
g
HDMI [HDMI Out]: Selecting the digital video signal format for
connecting to a TV via an HDMI mini-cable.
[HDMI Control]: Select [On] to allow the camera to be
operated using remotes for TVs that support HDMI control.
70
Video Out Choose the video standard ([NTSC] or [PAL]) used in your
country or region.
69
G/Info Settings
Choose the information displayed when the INFO button is
pressed.
[qInfo]: Choose the information displayed in full frame
playback.
[LV-Info]: Choose the information displayed when the
camera is in shooting mode.
To choose a framing guide from [w], [x], [y], or [X],
select [Displayed Grid].
[G Settings]: Choose the information displayed in index
and calendar playback.
32, 33
64
KControl
Settings
Choose the controls displayed in each shooting mode.
Controls
Shooting mode
P/A/
S/M
A
ART SCN
Live Control (P. 20) On/Off On/Off On/Off On/Off
SCP (P. 91) On/Off On/Off On/Off On/Off
Live Guide (P. 18) On/Off
Art Menu On/Off
Scene Menu On/Off
32
Picture Mode
Settings
Display only the selected picture mode when the live control
or super control panel is used to select a picture mode.
Histogram
Settings
[Highlight]: Choose the lower bound for the highlight display.
[Shadow]: Choose the upper bound for the shadow display.
33
Mode Guide Choose [On] to display help for the selected mode when the
mode dial is rotated to a new setting.
10
Live View Boost If [On] is selected, priority will be given to making images
clearly visible; the effects exposure compensation and other
settings will not be visible in the monitor.
ART LV Mode [mode1]: The lter effect is always displayed.
[mode2]: Filter effects are not visible in the monitor while
the shutter button is pressed halfway. Choose for a smooth
display.
84
EN
Customizing camera settings
10
Option Description
g
q Close Up Mode [mode1]: Press U to zoom in (to a maximum of 14 ×) and
press G to zoom out.
[mode2]: Press U to display the zoom frame for the
speci ed zoom ratio. Press U again to zoom in.
14, 64
Info Off Choose how long information is displayed.
Backlit LCD If no operations are performed for the selected period, the
backlight will dim to save battery power. The backlight will
not dim if [Hold] is selected.
Sleep The camera will enter sleep (energy saving) mode if no
operations are performed for the selected period. The
camera can be reactivated by pressing the shutter button
halfway.
8 (Beep sound)
When set to [Off], you can turn off the beep sound that is
emitted when the focus locks by pressing the shutter button.
Volume Adjust playback volume. 15, 62,
66
USB Mode Choose a mode for connecting the camera to a computer or
printer. Choose [Auto] to display USB mode options every
time the camera is connected.
V Exp/p/ISO
MENU
c
V
Option Description
g
EV Step Choose the size of the increments used when selecting
shutter speed, aperture, exposure compensation, and other
exposure parameters.
Metering Choose a metering mode according to the scene. 41
AEL Metering Choose the metering method used for AE lock (P. 41).
[Auto]: Use the currently selected metering method.
ISO Set ISO sensitivity. 48
ISO Step Select the increments available for choosing ISO sensitivity.
ISO-Auto Set Choose the upper limit and default value used for ISO
sensitivity when [Auto] is selected for [ISO].
[High Limit]: Choose the upper limit for auto ISO sensitivity
selection.
[Default]: Choose the default value for auto ISO sensitivity
selection.
ISO-Auto Choose the shooting modes in which [Auto] ISO sensitivity
is available.
[P/A/S]: Auto ISO sensitivity selection is available in all modes
except M. ISO sensitivity is xed at ISO 200 in mode M.
[All]: Auto ISO sensitivity selection is available in all modes.
Bulb Timer You can set the maximum time for bulb shooting.
Anti-shock z
Choose the delay between the shutter button being
pressed and the shutter being released. This diminishes
camera shake caused by vibrations.This feature is
useful in situations such as microscope photography and
astrophotography. It is also useful for sequential shooting
(P. 49) and self timer photography (P. 49).
U Disp/8/PC
MENU
c
U
85
EN
Customizing camera settings
10
W #Custom
MENU
c
W
Option Description
g
# X-Sync.
Choose the shutter speed used when the ash res.
104
# Slow Limit
Choose the slowest shutter speed available when a ash is
used.
104
w+F
When set to [On], it will be added to the exposure
compensation value and ash intensity control will be
performed.
40, 60
X K/Color/WB
MENU
c
X
Option Description
g
Noise Reduct. This function reduces the noise that is generated during long
exposures.
[Auto]: Noise reduction is only performed at slow shutter
speeds.
[On]: Noise reduction is performed with every shot.
[Off]: Noise reduction off.
Noise reduction requires about twice the time needed to
record the image.
Noise reduction turns off automatically during sequential
shooting.
This function may not work effectively with some shooting
conditions or subjects.
53
Noise Filter Choose the amount of noise reduction performed at high
ISO sensitivities.
WB Choose the white balance mode. 43
All >
[All Set]: Use the same white balance compensation in all
modes except [CWB].
[All Reset]: Set white balance compensation for all modes
except [CWB] to 0.
W Keep Warm
Color
Select [Off] to eliminate “warm” colors from pictures taken
under incandescent lighting.
#+WB
Adjust white balance for use with a ash.
Color Space You can select how colors are reproduced on the monitor or
printer.
Shading Comp. Choose [On] to correct peripheral illumination according to
the type of lens.
Compensation is not available for teleconverters or
extension tubes.
Noise may be visible at the edges of photographs taken at
high ISO sensitivities.
86
EN
Customizing camera settings
10
Option Description
g
K Set
The record mode for JPEG photographs can be selected
from four combinations of image size and compression
rate. The camera offers a choice of three sizes and four
compression rates for each combination.
Modifying JPEG record modes
1) Use HI to select a
combination ([K1]
– [K4]) and use
FG to change.
2) Press Q.
F
1
SF
Y
2
F
X
3
N
W
4
SF
W
D
Set
Pixel Count
Back
Set
Compression rateNumber of pixels
47
Pixel Count
Choose the pixel count for [X]- and [W]-size images.
1) Select [Pixel Count] in the c Custom Menu tab X.
2) Select [Xiddle] or
[Wmall] and press I.
3) Choose a pixel count
and press Q.
Xiddle
Wmall
2560×1920
1280×960
Pixel Count
Set
Back
47
Y Record/Erase
MENU
c
Y
Option Description
g
Quick Erase
If [On] is selected, pressing the D button in the playback
display will immediately delete the current image.
RAW+JPEG Erase Choose the action performed when a photograph recorded
at a setting of RAW+JPEG is erased in single-frame
playback (P. 15).
[JPEG]: Only the JPEG copy is erased.
[RAW]: Only the RAW copy is erased.
[RAW+JPEG]: Both copies are erased.
Both the RAW and JPEG copies are deleted when
selected images are deleted or when [All Erase] (P. 65) is
selected.
47
File Name [Auto]: Even when a new card is inserted, the le numbers
are retained from the previous card. File numbering
continues from the last number used or from the highest
number available on the card.
[Reset]: When you insert a new card, the folder numbers
starts at 100 and the le name starts at 0001. If a card
containing images is inserted, the le numbers start at the
number following the highest le number on the card.
X K/Color/WB
MENU
c
X
87
EN
Customizing camera settings
10
Option Description
g
Edit Filename Choose how image les are named by editing the portion of
the lename highlighted below in gray.
sRGB: Pmdd0000.jpg Pmdd
AdobeRGB: _mdd0000.jpg mdd
Priority Set Choose the default selection ([Yes] or [No]) for con rmation
dialogs.
dpi Setting Choose the print resolution.
[Auto]: Print resolution is selected automatically according
to image size.
[Custom]: Press I to choose a print resolution.
Copyright Settings Add the names of the photographer and copyright holder to
new photographs. Names can be up to 63 characters long.
[Copyright Info.]: Select [On] to include the names of the
photographer and copyright holder in the Exif data for new
photographs.
[Artist Name]: Enter the name of the photographer.
[Copyright Name]: Enter the name of the copyright holder.
1) Highlight a character 2 and press Q to add the
highlighted character to the name 1.
2) Repeat Step 1 to
complete the name,
then highlight [END] and
press Q.
To delete a character,
press the INFO
button to place the
cursor in the name
area 1, highlight the
character, and press
D.
!”#$%&
()
*+, -. /
01234567
89: ;<=>?
@
ABCDEFGH I JKLMNO
PQRSTUVWXYZ
[]_
abcdefghi j k lmnEND
opqrs tuvwxyz
{}
ABCDE
05/70
Delete
Copyright Name
Cancel Set
1
2
OLYMPUS does not accept liability for damages arising from disputes involving the use of
[Copyright Settings]. Use at your own risk.
Z Movie
MENU
c
Z
Option Description
g
nMode
Choose a movie record mode. This option can also be
selected using the live control.
61
Movie+Still Choose [On] to record a photograph when movie recording
ends.
92
Movie R
Choose [Off] to record silent movies. This option can also
be selected using the live control.
62
Y Record/Erase
MENU
c
Y
88
EN
Customizing camera settings
10
b
K
Utility
MENU
c
b
Option Description
g
Pixel Mapping The pixel mapping feature allows the camera to check
and adjust the image pickup device and image processing
functions.
98
Exposure Shift Adjust optimal exposure separately for each metering mode.
This reduces the number of exposure compensation options
available in the selected direction.
The effects are not visible in the monitor. To make
normal adjustments to the exposure, perform exposure
compensation (P. 40).
8 Warning
Level
Choose the battery level at which the 8 warning is
displayed.
6
Level Adjust Adjust the angle of the virtual horizon.
[Reset]: Restore the factory default angle.
[Adjust]: Set the virtual horizon to the camera’s current angle.
Touch Screen
Settings
Activate the touch screen. Choose [Off] to disable the touch
screen.
22
Eye-Fi* Enable or disable upload when using an Eye-Fi card. 99
Use in accordance with local regulations. Onboard airplanes and in other locations in
which the use of wireless devices is prohibited, remove the Eye-Fi card from the camera
or select [Off] for [Eye-Fi].
The camera does not support the “endless” Eye-Fi mode.
AEL/AFL
MENU
c
S
[AEL/AFL]
The Fn1 and R buttons can be used for metering or
autofocus. Choose a mode for each focus mode.
AEL/S-AF
AEL
AEL
AFL
mode1
S-AF AEL/AFL
ExposureFully
Half Way
Back
Set
AEL/AFL
Mode
Shutter button function
Fn1 button or
R button function
Half-press Full press
When holding down
AEL/AFL
Focus Exposure Focus Exposure Focus Exposure
S-AF
mode1 S-AF Locked Locked
mode2 S-AF Locked Locked
mode3 Locked S-AF
C-AF
mode1 C-AF start Locked Locked Locked
mode2 C-AF start Locked Locked Locked
mode3 Locked Locked C-AF start
mode4 Locked Locked C-AF start
MF
mode1 Locked Locked
mode2 Locked Locked
mode3 Locked S-AF
*
89
EN
Customizing camera settings
10
U Function, V Function, R Function
MENU c S [Button Function] [U Function]/ [V Function]/[R Function]
The following functions can be assigned to the Fn1/Fn2 and R buttons. The options
available vary from button to button.
F
Exposure compensation can be adjusted by rotating a dial when
the button is pressed.
AEL/AFL
Press the Fn1 or R button to lock focus and exposure.
R REC
Press the button to record a movie. If movie recording is not
currently assigned to a button, movies can be recorded by
rotating the mode dial to n and pressing the shutter button.
Preview (electronic) Aperture is stopped down to the selected value while the button
is pressed (P. 51).
k
The camera measures white balance when the button is pressed
(P. 44).
P Home
Pressing the button selects the AF target position saved with
[P Set Home] (P. 82). The home AF target position is indicated
by a p icon. Press the button again to return to AF target
mode. If the camera is turned off when the home position is
selected, the home position will be reset.
MF Press the button to select manual focus mode. Press the button
again to restore the previously selected AF mode.
RAW K
Press the button to toggle between JPEG and RAW+JPEG
record modes.
Test Picture To take a photograph and display it in the monitor without
recording it to the card, press the shutter button while the Fn1 or
R button is pressed.
Myset1 – Myset4
Pictures taken while the Fn1 or R button is pressed will be shot
using the settings selected for [Reset/Myset] (P. 35).
Backlit LCD
Press the Fn1/Fn2 or R button to turn the monitor off. This is
useful when you are using the electronic view nder. Press the
button again to turn the monitor on.
IS Mode Adjust image stabilization settings.
Live Guide Press the button to display live guides.
Digital Tele-converter Press the button to turn digital zoom on or off.
Off No function is assigned to the button.
90
EN
Customizing camera settings
10
Accessory port menu options
A OLYMPUS PENPAL Share
MENU
#
A
Option Description
g
Please
Wait
Receive images and add hosts to the address book.
71
Address
Book
[Address List]: View the hosts that have been saved to the address
book.
[New Pairing]: Add a host to the address book.
[Search Timer]: Choose how long the camera searches for a host.
72
My
OLYMPUS
PENPAL
Display information for your OLYMPUS PENPAL, including the name,
address, and supported services. Press Q to edit the device name. 72
Picture
Send Size
Choose the size at which images are transmitted.
[Size 1: Small]: Images are sent at a size equivalent to 640 × 480.
[Size 2: Large]: Images are sent at a size equivalent to 1920 × 1440.
[Size 3: Medium]: Images are sent at a size equivalent to 1280 × 960.
71
B OLYMPUS PENPAL Album
MENU
#
B
Option Description
g
Copy All All images and sound les are copied between the memory card and
OLYMPUS PENPAL. Copied images are resized according to the
option selected for picture copy size.
72
Reset
Protect
Remove protection from all pictures in the OLYMPUS PENPAL album.
72
Album
Mem.
Usage
Show the number of pictures currently in the album and the number of
additional pictures that can be stored at [Size 2: Medium]. 72
Album
Mem.
Setup
[All Erase]: Delete all pictures in the album.
[Format Album]: Format the album. 72
Picture
Copy Size
Choose the size at which images are copied.
[Size 1: Large]: Copied images are not resized.
[Size 2: Medium]: Images are copied at a size equivalent to 1920 ×
1440.
72
C Electronic View nder
MENU
#
C
Option Description
g
EVF Adjust Adjust the brightness and color
temperature of the electronic view nder.
The selected color temperature is also
used in the monitor during playback. Use
HI to select color temperature (j) or
brightness (k) and use FG to choose
from values between [+7] and [–7].
-
5
j
+2
k
EVF Adjust
Back
Set
102
91
EN
Customizing camera settings
10
Using the super control panel
The term “super control panel” refers to the display shown below, which lists shooting
settings together with the option currently selected for each.
To use the super control panel, select [On] for [KControl Settings] > [SCP] (P. 83).
To choose between the live control, super control panel, and other displays, press Q
while the camera is in shooting mode and press the INFO button to cycle through the
different displays.
Recommended ISO
250250 F5.6
+
2.0
+
2.0
P
3838
Super Fine
Off
mall
NORM
ISO
AUTO
AUTO
WB
AUTO
+RAW+RAW
4:3
2
3
4
5
1
6
7
8
9
0bced
a
Settings that can be modi ed using super control panel
1 Currently selected option
2 ISO sensitivity .................................P. 48
3 Sequential shooting/self-timer ........P. 49
4 Flash mode .....................................P. 59
5 Flash intensity control .....................P. 60
6 White balance .................................P. 43
White balance compensation..........P. 44
7 Picture mode...................................P. 45
8 Sharpness N..................................P. 46
Contrast J .....................................P. 46
Saturation T .................................P. 46
Gradation z...................................P. 46
B&W Filter x .................................P. 46
Picture tone y ...............................P. 46
9 Color space.....................................P. 85
0 Face priority ..............................P. 39, 82
a Metering mode ................................P. 41
b Aspect ratio .....................................P. 48
c Record mode ..................................P. 47
d AF mode .........................................P. 36
AF target .........................................P. 37
e Image stabilizer...............................P. 42
# Cautions
Not displayed in movie record mode.
1
After displaying the super control
panel, select the desired setting using
FGHI and press Q.
You can also select settings using the dials.
Recommended ISO
250250 F5.6
P
3838
Super Fine
Off
mall
NORM
ISO
AUTO
AUTO
WB
AUTO
+RAW+RAW
4:3
Cursor
2
Select an option using HI and press Q.
Repeat steps 1 and 2 as necessary.
The selected settings take effect automatically if no
operations are performed for a few seconds.
P
AUTOAUTO
200200 250250 320320 400400 500500 640640
ISO-A
200
3
Press the shutter button halfway to return to shooting mode.
92
EN
Customizing camera settings
10
Recording movies with the shutter button
Movies are usually recorded using the R button, but the shutter button can be used if
other functions have been assigned to each of the Fn1, Fn2, and R buttons.
1
Set the mode dial to
n
.
2
Press the shutter button halfway down and
focus on what you wish record.
When the subject is in focus, the AF con rmation
mark lights up.
250250 F5.6 00:21:38
n
HD
AF con rmation mark
n mode display
Available
recording time
3
Press the shutter button all the way to
begin recording.
REC lights up while both movie and sound are
recorded simultaneously.
00:02:18
n
Lights up in red
during recording
Total recording
time
4
Press the shutter button all the way to end recording.
Taking a photograph when recording ends
Select [On] for [Movie+Still] to take a still picture when movie recording is nished. This
feature is useful when you want to record a still picture as well as the movie.
1
Select [Movie+Still] in c Custom Menu (P. 81)
tab Z.
2
Select [On] and press Q.
P
n
Mode
Movie+Still
Movie
R
On
Off
Custom I
Back
Set
# Cautions
This option is only available when the shutter button is used to record movies.
93
EN
Customizing camera settings
10
Wireless remote control ash photography
External ash units that offer a remote control mode and are designated for use
with this camera can be used for wireless ash photography. The camera can
independently control up to three groups consisting of the built-in ash and/or remote
ash units. See the documentation provided with the external ash units for details.
1
Set the remote ash units to RC mode and place them as desired.
Turn each ash unit on, press the MODE button, and select RC mode.
Select a channel and group for each ash unit.
2
Select [On] for [# RC Mode] in X Shooting menu 2 (P. 107).
The super control panel switches to RC mode.
You can choose a super control panel display by repeatedly pressing the INFO
button.
Select a ash mode (note that red-eye reduction is not available in RC mode).
3
Adjust the settings for each group in the super control panel.
Flash intensity value
250250 F5.6
0.0
0.0
P
3838
A Mode
TTL
M
Off
+5.0
TTL +3.0
1/8
LO
1
Ch
Group
Select the ash control
mode and adjust the ash
intensity separately for
each group. For MANUAL,
select the ash intensity.
Normal ash/Super FP ash
Switch between normal
ash and Super FP ash.
Communication light level
Set the communication
light level to [HI], [MID],
or [LO].
Channel
Set the communication
channel to the same
channel used on the ash.
Flash intensityFlash control
mode
Adjust settings for the built-in
ash.
4
Press the #UP button to raise the built-in ash.
After con rming that the built-in and remote ash units have charged, take a test
shot.
Wireless ash control range
Position the wireless ash units with their
remote sensors facing the camera. The
following illustration shows the approximate
ranges at which the ash units can be
positioned. The actual control range varies with
local conditions.
7m
5m
100°100°
50°
50°
50°
50°
60°
60°
30°
30°
30°
30°
# Cautions
We recommend using a single group of up to three remote ash units.
Remote ash units can not be used for second curtain slow synchronization or anti-shock
exposures longer than 4 seconds.
If the subject is too close to the camera, the control ashes emitted by the built-in ash
may affect exposure (this effect can be reduced by reducing the output of the built-in ash
by, for example, using a diffuser).
94
EN
Information
11
11
Shooting tips and information
The camera does not turn on even when a battery is loaded
The battery is not fully charged
Charge the battery with the charger.
The battery is temporarily unable to function because of the cold
Battery performance drops at low temperatures. Remove the battery and warm it by
putting it in your pocket for a while.
No picture is taken when the shutter button is pressed
The camera has turned off automatically
The camera automatically enters sleep mode to reduce the drain on the battery if no
operations are performed for a set period of time. g [Sleep] (P. 13)
If no operations are performed for a set time (5 minutes) after the camera has entered
sleep mode, the camera will turn off automatically.
The ash is charging
On the monitor, the # mark blinks when charging is in progress. Wait for the blinking to
stop, then press the shutter button.
Unable to focus
The camera can not focus on subjects that are too close to the camera or that are not
suited to autofocus (the AF con rmation mark will blink in the monitor). Increase the
distance to the subject or focus on a high contrast object at the same distance from the
camera as your main subject, compose the shot, and shoot.
Subjects that are dif cult to focus on
It may be dif cult to focus with auto focus in the following situations.
AF con rmation
mark is blinking.
These subjects
are not focused.
Subject with low
contrast
Excessively bright
light in center of
frame
Subject containing no
vertical lines
AF con rmation
mark lights up but
the subject is not
focused.
Subjects at different
distances
Fast-moving subject Subject not inside
AF area
Information
95
EN
Information
11
Noise reduction is activated
When shooting night scenes, shutter speeds are slower and noise tends to appear in
images. The camera activates the noise-reduction process after shooting at slow shutter
speeds. During which, shooting is not allowed. You can set [Noise Reduct.] to [Off].
g “Customizing camera settings” (P. 81)
The date and time has not been set
The camera is used with the settings at the time of purchase
The date and time of the camera is not set when purchased. Set the date and time before
using the camera. g “Setting the date/time” (P. 7)
The battery has been removed from the camera
The date and time settings will be returned to the factory default settings if the camera is
left without the battery for approximately 1 day. The settings will be cancelled more quickly
if the battery was only loaded in the camera for a short time before being removed. Before
taking important pictures, check that the date and time settings are correct.
Set functions are restored to their factory default settings
When you rotate the mode dial or turn off the power in a shooting mode other than P, A,
S, or M, functions with changes made to their settings are restored to the factory default
settings.
Image taken appears whitish
This may occur when the picture is taken in backlight or semi-backlight conditions. This is
due to a phenomenon called are or ghosting. As far as possible, consider a composition
where strong light source is not taken in the picture. Flare may occur even when a light
source is not present in the picture. Use a lens hood to shade the lens from the light source.
If a lens hood does not have effect, use your hand to shade the lens from the light. g
“Interchangeable lenses” (P. 100)
Unknown bright dot(s) appear on the subject in the picture taken
This may be due to stuck pixel(s) on the image pickup device. Perform [Pixel Mapping]. If the
problem persists, repeat pixel mapping a few times.
g “Pixel mapping - Checking the image processing functions” (P. 98)
Functions that cannot be selected from menus
Some items may not be selectable from the menus when using the arrow pad.
Items that cannot be set with the current shooting mode
Items that cannot be set because of an item that has already been set:
Combination of [j] and [Noise Reduct.], etc.
96
EN
Information
11
Error codes
Monitor
indication
Possible cause Corrective action
No Card
The card is not inserted, or it
cannot be recognized.
Insert a card or insert a different
card.
Card Error
There is a problem with the card.
Insert the card again. If the
problem persists, format the card.
If the card cannot be formatted, it
cannot be used.
Write Protect
Writing to the card is prohibited.
The card write-protect switch is
set to the “LOCK” side. Release
the switch. (P. 99)
Card Full
The card is full. No more
pictures can be taken or no
more information such as print
reservation can be recorded.
There is no space in the card
and print reservation or new
images cannot be recorded.
Replace the card or erase
unwanted pictures.
Before erasing, download
important images to a PC.
Clean the contact area of
the card with a dry cloth.
Clean Card
Format
Card Setup
Set
Card cannot be read. Card may
not have been formatted.
Select [Clean Card], press
Q and turn off the camera.
Remove the card and wipe dry
the metallic surface with a soft,
dry cloth.
Select [Format][Yes], and then
press Q to format the card.
Formatting the card erases all
data on the card.
No Picture
There are no pictures on the
card.
The card contains no pictures.
Record pictures and play back.
Picture Error
The selected picture cannot be
displayed for playback due to
a problem with this picture. Or
the picture cannot be used for
playback on this camera.
Use image processing software to
view the picture on a PC.
If that cannot be done, the image
le is damaged.
The Image Cannot
Be Edited
Pictures taken with another
camera cannot be edited on this
camera.
Use image processing software to
edit the picture.
Picture Error
Images can not be transferred
between devices that are
currently receiving or transmitting
data.
Increase the amount of memory
available on the card, for example
by deleting unwanted images,
or choose a smaller size for the
images being transmitted.
97
EN
Information
11
Monitor
indication
Possible cause Corrective action
m
The internal temperature of
the camera has risen due to
sequential shooting.
Turn off the camera and wait for
the internal temperature to cool.
Internal camera
temperature is too
high.
Please wait for
cooling before
camera use.
Wait a moment for the camera
to turn off automatically. Allow
the internal temperature of the
camera to cool before resuming
operations.
Battery Empty
The battery is drained. Charge the battery.
No Connection
The camera is not connected to
the computer or printer correctly.
Disconnect the camera and
connect it again correctly.
No Paper
There is no paper in the printer. Load some paper in the printer.
No Ink
The printer has run out of ink.
Replace the ink cartridge in the
printer.
Jammed
The paper is jammed. Remove the jammed paper.
Settings Changed
The printer's paper cassette has
been removed or the printer has
been manipulated while making
settings on the camera.
Do not manipulate the printer
while making settings on the
camera.
Print Error
There is a problem with the
printer and/or camera.
Turn off camera and printer.
Check the printer and remedy any
problems before turning the power
on again.
Cannot Print
Pictures recorded on other
cameras may not be printed on
this camera.
Use a personal computer to print.
The lens is locked.
Please extend the
lens.
The lens of the retractable lens
stays retracted.
Extend the lens. (P. 12)
Please check the
status of a lens.
An abnormality has occurred
between the camera and the
lens.
Turn off the camera, check the
connection with the lens, and turn
the power on again.
98
EN
Information
11
Cleaning and storing the camera
Cleaning the camera
Turn off the camera and remove the battery before cleaning the camera.
Exterior:
Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy water
and wring well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you
have used the camera at the beach, use a cloth soaked in clean water and well wrung.
Monitor:
Wipe gently with a soft cloth.
Lens:
Blow dust off the lens with a commercially available blower. For the lens, wipe gently with
a lens cleaning paper.
Storage
When not using the camera for a prolonged period, remove the battery and card. Store
the camera in a cool, dry place that is well ventilated.
Insert the battery periodically and test the camera's functions.
Remove dust and other foreign matter from the body and rear caps before attaching them.
Attach the body cap to the camera to prevent dust from getting inside when no lens is
attached. Be sure to replace the front and rear lens caps before putting the lens away.
Clean the camera after use.
Do not store with insect repellent.
Cleaning and checking the image pickup device
This camera incorporates a dust reduction function to keep dust from getting on the
image pickup device and to remove any dust or dirt from the image pickup device
surface with ultrasonic vibrations. The dust reduction function operates when the
camera is turned on.
The dust reduction function operates at the same time as the pixel mapping, which
checks the image pickup device and image processing circuitry. Since dust reduction
is activated every time the camera's power is turned on, the camera should be held
upright for the dust reduction function to be effective.
# Cautions
Do not use strong solvents such as benzene or alcohol, or a chemically treated cloth.
Avoid storing the camera in places where chemicals are treated, in order to protect the
camera from corrosion.
Mold may form on the lens surface if the lens is left dirty.
Check each part of the camera before use if it has not been used for a long time. Before
taking important pictures, be sure to take a test shot and check that the camera works
properly.
Pixel mapping - Checking the image processing functions
The pixel mapping feature allows the camera to check and adjust the image pickup
device and image processing functions. After using the monitor or taking continuous
shots, wait for at least one minute before using the pixel mapping function to ensure
that it operates correctly.
99
EN
Information
11
1
Select [Pixel Mapping] in c Custom Menu (P. 81) tab b.
2
Press I, then press Q.
The [Busy] bar is displayed when pixel mapping is in progress. When pixel mapping
is nished, the menu is restored.
# Cautions
If you accidentally turn the camera off during pixel mapping, start again from Step 1.
Card basics
Usable cards
In this manual, all storage devices are referred
to as “cards.” The following types of SD memory
card (commercially available) can be used with
this camera: SD, SDHC, SDXC, and Eye-Fi. For
the latest information, please visit the Olympus
website.
SD card write protect switch
The SD card body has a write protect switch. If you set the switch to
the “LOCK” side, you will not be able to write to the card, delete data or
format. Return the switch to the unlock position enable writing.
LOCK
# Cautions
The data in the card will not be erased completely even after formatting the card or
deleting the data. When discarding, destroy the card to prevent leakage of personal
information.
Use the Eye-Fi card in compliance with the laws and regulations of the country where the
camera is used.
In locations such as on an airplane, where the Eye-Fi communication is prohibited,
remove the Eye-Fi card from the camera, or set [Eye-Fi] (P. 88) to [Off].
The Eye-Fi card may became hot during use.
When using an Eye-Fi card, the battery may run out faster.
When using an Eye-Fi card, the camera may function more slowly.
Formatting the card
Cards formatted on a computer or other camera must be formatted with the camera
before they can be used.
All data stored on the card, including protected images, is erased when the card is
formatted. When formatting a used card, con rm there are no images that you still
want to keep on the card.
1
Select [Card Setup] in shooting menu W
(P. 107).
2
Select [Format].
3
Select [Yes] and press Q.
Formatting is performed.
All Erase
Format
Card Setup
Back
Set
100
EN
Information
11
Battery and charger
Use the single Olympus lithium-ion battery. Use only genuine OLYMPUS rechargeable
batteries.
Use only compatible battery chargers to charge rechargeable batteries. BLS-1 batteries
must be charged using the BCS-1, BLS-5 batteries using the BCS-5.
The camera’s power consumption varies widely with usage and other conditions.
As the following consume a lot of power even without shooting, the battery will be drained
quickly.
Performing auto focus repeatedly by pressing the shutter button halfway in shooting
mode.
Displaying images on the monitor for a prolonged period.
When connected to a computer or printer.
When using a drained battery, the camera may turn off without the low battery warning
being displayed.
The battery will not be fully charged at the time of purchase. Charge the battery using the
provided charger before use.
The normal charging time using the provided charger is approximately 3 hours 30 minutes
(estimated).
Do not attempt to use chargers not speci cally designated for use with the supplied
battery, or to use batteries not speci cally designated for use with the supplied charger.
# Cautions
There is a risk of explosion if the battery is replaced with the incorrect battery type.
Dispose of the used battery following the instructions. “Battery Handling Precautions”
(P. 114)
Using your charger abroad
The charger can be used in most home electrical sources within the range of 100 V to
240 V AC (50/60 Hz) around the world. However, depending on the country or area you
are in, the AC wall outlet may be shaped differently and the charger may require a plug
adapter to match the wall outlet. For details, ask at your local electrical shop or travel
agent.
Do not use commercially available travel adapters as the charger may malfunction.
Interchangeable lenses
Choose a lens according to the scene and your creative intent. Use
lenses designed exclusively for the Four Thirds system and bearing the
M. ZUIKO label or the symbol shown at right. With an adapter, you can
also use Four Thirds System and OM System lenses.
# Cautions
When you attach or remove the body cap and lens from the camera, keep the lens mount
on the camera pointed downward. This helps prevent dust and other foreign matter from
getting inside the camera.
Do not remove the body cap or attach the lens in dusty places.
Do not point the lens attached to the camera toward the sun. This may cause the camera
to malfunction or even ignite due to the magnifying effect of sunlight focusing through the
lens.
Be careful not to lose the body cap and rear cap.
101
EN
Information
11
M.ZUIKO DIGITAL lens speci cations
Names of parts
1 Filter mount thread
2 Zoom ring (zoom lenses only)
3 Focus ring
4 Mount index
5 Electrical contacts
6 Front cap
7 Rear cap
If the hood is attached
to a lens with a
decorative ring, rotate
the ring to the left.
Lens and camera combinations
Lens Camera Attachment AF Metering
Micro Four Thirds
system lens
Micro Four Thirds
system camera
Yes Yes Yes
Four Thirds system
lens
Attachment
possible with
mount adapter
Yes
*1
Yes
OM System lenses No Yes
*2
Micro Four Thirds
system lens
Four Thirds System
Camera
No No No
*1 [C-AF] and [C-AF+TR] of [AF Mode] cannot be used.
*2 Accurate metering not possible.
Main Speci cations
Items
14 – 42 mm II R
17 mm
40 – 150 mm R
14 – 150 mm
Mount Micro Four Thirds mount
Focal length 14 – 42 mm 17 mm 40 – 150 mm 14 – 150 mm
Max. aperture f/3.5 – 5.6 f/2.8 f/4.0 – 5.6 f/4.0 – 5.6
Image angle 75° – 29° 64.9° 30.3° – 8.2° 75° – 8.2°
Lens con guration
7 groups, 8 lenses
4 groups,
6 lenses
10 groups,
13 lenses
11 groups,
15 lenses
Multilayer lm coating
Iris control f/3.5 – 22 f/2.8 – 22 f/4.0 – 22 f/4.0 – 22
Shooting range
(Focal length)
0.25 m – ) (14 – 19mm)
0.3 m – ) (20 – 42mm)
0.2 m – ) 0.9 m – ) 0.5 m – )
Focus adjustment AF/MF switching
Weight (excluding
hood and cap)
115 g 71 g 190 g 260 g
Dimensions
(Max. diameter ×
overall length)
l56.5×50 mm l57×22 mm l63.5×83 mm l63.5×83 mm
Filter mount
thread diameter
37 mm 37 mm 58 mm 58 mm
# Cautions
Edges of pictures may be cut off if more than one lter is used or if a thick lter is used.
102
EN
Information
11
Principal Accessories
Mount adapter
Mount adapter allows the camera to be used with lenses that do not conform to the
Micro Four Thirds System standard.
Four Thirds lens adapter (MMF–2)
The camera requires MMF-2 Four Thirds lens adapter to attach Four Thirds lenses.
Some features, such as autofocus, may not be available.
OM adapter (MF–2)
Use with existing OLYMPUS OM System lenses. Focus and aperture must be adjusted
manually. Image stabilization can be used. Input the focal length of the lens being used
in the camera image stabilization settings.
Remote cable (RM–UC1)
Use when the slightest camera movement can result in blurred pictures, for example
for macro or bulb photography. The remote cable attaches via the camera USB
connector.
Converter lenses
Converter lenses attach to the camera lens for quick and easy sh-eye or macro
photography. See the OLYMPUS website for information on the lenses that can
be used.
Use the appropriate lens attachment for SCN mode (f, w, or m).
Macro arm light (MAL–1)
Use to illuminate subjects for macro photography, even at ranges at which vignetting
would occur with the ash.
Microphone set (SEMA–1)
Produces higher-quality recordings than the camera’s built-in microphone. The
microphone can be placed at a distance from the camera to avoid recording ambient
sounds or wind noise. Third-party commercial microphones can also be used
depending on your creative intent (power supplied via l3.5 mm stereo mini-plug).
Electronic view nder (VF-2)
Electronic view nders can be used to view the shooting display. This is convenient
when you are in a very bright location, such as under direct sunlight, where it is dif cult
to view the monitor, or are using the camera at a low angle.
Camera grip
You can replace the camera grip. To remove the grip, unfasten the grip screw.
103
EN
Information
11
Exposure warning display
If the optimum exposure cannot be obtained when pressing the shutter button halfway,
the display will blink on the monitor.
Shooting
mode
Warning display
example (blinking)
Status Action
P
60"
60"
F2.8
F2.8
The subject is
too dark.
Increase the ISO sensitivity.
Use the ash.
4000
4000
F22
F22
The subject is
too bright.
Decrease the ISO sensitivity.
Use a commercially available ND lter
(for adjusting the amount of light).
A
30"
30"
F5.6
F5.6
The subject is
underexposed.
Decrease the aperture value.
Increase the ISO sensitivity.
4000
4000
F5.6
F5.6
The subject is
overexposed.
Increase the aperture value.
Decrease the ISO sensitivity or use a
commercially available ND lter (for
adjusting the amount of light).
S
2000
2000
F2.8
F2.8
The subject is
underexposed.
Set the shutter speed slower.
Increase the ISO sensitivity.
125
125
F22
F22
The subject is
overexposed.
Set the shutter speed faster.
Decrease the ISO sensitivity or use a
commercially available ND lter (for
adjusting the amount of light).
The aperture value at the moment when its indication blinks varies with the lens type and
focal length of the lens.
104
EN
Information
11
Flash modes that can be set by shooting mode
Shooting
Mode
Super
control
panel
Flash Mode
Flash
timing
Conditions for
ring the ash
Shutter
speed
limit
P/A
#AUTO
Auto ash
1st
curtain
Fires automatically
in dark/backlit *
conditions
1/30 sec. –
1/180 sec.
!
Auto ash
(red-eye reduction)
#
Fill-in ash Always res
30 sec. –
1/180 sec.
$
Flash off
kk k
!
SLOW
Slow synchronization
(red-eye reduction)
1st
curtain
Fires automatically
in dark/backlit *
conditions
60 sec. –
1/180 sec.
#SLOW
Slow synchronization
(1st curtain)
#
SLOW2
Slow synchronization
(2nd curtain)
2nd
curtain
S/M
#
Fill-in ash
1st
curtain
Always res
60 sec. –
1/180 sec.
#!
Fill-in ash
(red-eye reduction)
$
Flash off
kk k
#
2nd-C
Fill-in ash/Slow
synchronization
(2nd curtain)
2nd
curtain
Always res
60 sec. –
1/180 sec.
* When the ash is set to the Super FP mode, it detects backlight and res with a longer
duration than for normal ash before emitting light.
#AUTO, $ can be set in A mode.
Minimum range
The lens may cast shadows over objects close to
the camera, causing vignetting, or be too bright
even at minimum output.
Lens
Approximate distance at
which vignetting occurs
14 – 42 mm 0.5 m
17 mm 0.25 m
40 – 150 mm 1.0 m
14 150 mm Flash can not be used
Use optional off-camera ash units to prevent vignetting. To prevent photographs from
being overexposed, select mode A or M and choose a high f-number, or reduce ISO
sensitivity.
105
EN
Information
11
Flash synchronization and shutter speed
Shooting
mode
Flash timing
Upper limit of
synchronization
timing
*1
Fixed timing
when ash
res
*2
P
1/ (lens focal length × 2) or synchronization
timing, whichever is slower
1/180
1/60
A
S
The set shutter speed
M
*1 Can be changed using menu: 1/60 1/180 [# X-Sync.]: g “Customizing camera
settings” (P. 81)
*2 Can be changed using menu: 30 1/180 [# Slow Limit]: g “Customizing camera
settings” (P. 81)
External ash shooting
With this camera, you can use one of the separately sold external ash units to achieve
a ash suited to your needs. The external ashes communicate with the camera,
allowing you to control the camera’s ash modes with various available ash control
modes, such as TTL-AUTO and Super FP ash.
An external ash unit speci ed for use with this camera can be mounted on the camera
by attaching it to the camera’s hot shoe. You can also attach the ash to the ash
bracket on the camera using the bracket cable (optional). Refer to the documentation
provided with the external ash units as well.
Functions available with external ash units
Optional ash Flash control mode GN (Guide number) (ISO100) RC mode
FL-50R
TTL-AUTO, AUTO, MANUAL,
FP TTL AUTO, FP MANUAL
GN50 (85 mm*) GN28 (24 mm*)
D
FL-36R GN36 (85 mm*) GN20 (24 mm*)
D
FL-300R TTL-AUTO, MANUAL GN20 (28 mm*)
D
FL-14 TTL-AUTO, AUTO, MANUAL GN14 (28 mm*)
RF-11
TTL-AUTO, MANUAL
GN11
TF-22 GN22
* The focal length of the lens that can be used (Calculated based on 35 mm lm camera).
106
EN
Information
11
Record mode and le size/number of storable still
pictures
The le size in the table is approximate for les with a 4:3 aspect ratio.
Record
mode
Number of pixels
(Pixel Count)
Compression
File
format
File size
(MB)
Number of storable
still picture
*1
RAW
4032×3024
Loss-less compression ORF Approx. 13.8
55
YSF
1/2.7
JPEG
Approx. 8.4
102
YF
1/4 Approx. 5.9
146
YN
1/8 Approx. 2.7
322
YB
1/12 Approx. 1.8
480
XSF
3200×2400
1/2.7 Approx. 5.6
155
XF
1/4 Approx. 3.4
257
XN
1/8 Approx. 1.7
508
XB
1/12 Approx. 1.2
753
XSF
2560×1920
1/2.7 Approx. 3.2
271
XF
1/4 Approx. 2.2
398
XN
1/8 Approx. 1.1
782
XB
1/12 Approx. 0.8
1151
XSF
1920×1440
1/2.7 Approx. 1.8
476
XF
1/4 Approx. 1.3
701
XN
1/8 Approx. 0.7
1356
XB
1/12 Approx. 0.5
1968
XSF
1600×1200
1/2.7 Approx. 1.3
678
XF
1/4 Approx. 0.9
984
XN
1/8 Approx. 0.5
1906
XB
1/12 Approx. 0.4
2653
WSF
1280×960
1/2.7 Approx. 0.9
1034
WF
1/4 Approx. 0.6
1488
W
N
1/8 Approx. 0.4
2773
W
B
1/12 Approx. 0.3
3813
WSF
1024×768
1/2.7 Approx. 0.6
1564
WF
1/4 Approx. 0.4
2260
WN
1/8 Approx. 0.3
4068
WB
1/12 Approx. 0.2
5547
WSF
640×480
1/2.7 Approx. 0.3
3589
WF
1/4 Approx. 0.2
5085
WN
1/8 Approx. 0.2
7627
WB
1/12 Approx. 0.1
10170
*1 Assumes a 1GB SD card.
# Cautions
The number of remaining pictures may change according to the subject, whether or not
print reservations have been made, and other factors. In certain instances, the number of
remaining pictures displayed on the monitor will not change even when you take pictures
or erase stored images.
The actual le size varies according to the subject.
The maximum number of storable still pictures displayed on the monitor is 9999.
For the available recording time for movies, see the Olympus website.
107
EN
Information
11
Menu directory
*1: Can be added to [Myset].
*2: Default can be restored by selecting [Full] for [Reset].
*3: Default can be restored by selecting [Basic] for [Reset].
K Shooting Menu
Tab Function Default *1 *2 *3
g
W
Card Setup 65, 99
Reset/Myset
D
35
Picture Mode
jNatural
DDD
45
K
Still Picture
YN
DDD
47
Movie
k
Image Aspect 4:3
DDD
48
X j/Y o
DDD
49
Image Stabilizer
e
DDD
42
Bracketing
AE BKT Off
DDD
57
WB BKT
A – B
Off 57
G – M
FL BKT Off 58
ISO BKT Off 58
ART BKT Off 58
Multiple Exposure
Frame Off
DD
56Auto Gain Off
Overlay Off
w
±0.0
DDD
60
#RC Mode
Off
DDD
93
Digital Tele-converter Off
DDD
58
q Playback Menu
Tab Function Default *1 *2 *3
g
q
m
Start
66
BGM Melancholy
DD
Effect Fade
DD
Slide All
DD
Slide Interval 3 sec
D
Movie Interval Short
D
R
On
DD
65
Edit
Sel. Image
RAW Data Edit 67
JPEG Edit 67
R
68
Image Overlay 68
<
76
Reset Protect 65
108
EN
Information
11
d Setup Menu
Tab Function Default *1 *2 *3
g
d
X
7
W *
D
80
i
j ±0, k ±0, Vivid
DD
80
Rec View 5 sec
DDD
80
c/# Menu Display
c Menu Display
Off
D
80
# Menu Display
Off
Firmware 80
Settings differ depending on the region where the camera is purchased.
c Custom Menu
Tab Function Default *1 *2 *3
g
cR
AF/MF
AF Mode
Still Picture S-AF
DDD
81
Movie C–AF
Full-time AF Off
DDD
AF Area
o
DDD
P Set Up
Spiral
DD
Reset Lens On
DD
Bulb Focusing On
DD
Focus Ring
b
DDD
82
MF Assist Off
DD
P Set Home o
DD
AF Illuminat. On
DDD
I
Face Priority
K
DD
S
Button/dial
AEL/AFL
S-AF mode1
DDD
82
C-AF mode2
MF mode1
AEL/AFL Memo On
DDD
Button
Function
U Function
L
DDD
V Function F
R Function R REC
I Function
#
G Function
j
/Y
Dial
Function
P
j: Ps
j: Ps
DD
A
j:
FNo.
j:
FNo.
S
j: Shutter
j: Shutter
M
j: Shutter
j: FNo.
Menu
j: A/Value j: B
q
j:
Prev/Next
j: GU
Dial
Direction
Exposure Dial1
DD
Menu Dial1
dLock
Off
DD
T
Release
Rls Priority S Off
DDD
83
Rls Priority C On
DDD
*
109
EN
Information
11
Tab Function Default *1 *2 *3
g
c
U
Disp/8/PC
HDMI
HDMI Out 1080i
D
83
HDMI Control Off
D
Video Out *
D
G/Info
Settings
q Info
Image Only, Overall
DDD
LV-Info
Image Only, u
DD
G Settings O, Calendar
DD
KControl
Settings
iAUTO Live Guide
D
P/A/S/M Live Control
D
ART Art Menu
D
SCN Scene Menu
D
Picture Mode Settings On
DD
Histogram
Settings
Highlight 255
D
Shadow 0
Mode Guide On
D
Live View Boost Off
DDD
ART LV Mode mode1
D
q Close Up Mode
mode1
D
84
Info Off 10 sec
DDD
Backlit LCD Hold
DDD
Sleep 1 min
DDD
8
On
DDD
Volume 3
D
USB Mode Auto
DD
V
Exp/p/ISO
EV Step 1/3EV
DDD
84
Metering
p
DDD
AEL Metering Auto
DDD
ISO Auto
DDD
ISO Step 1/3EV
DDD
ISO-Auto Set
High Limit: 1600
Default: 200
DDD
ISO-Auto P/A/S
DDD
Bulb Timer 8 min
DDD
Anti-Shock z
Off
DDD
W
# Custom
#X-Sync.
1/180
DDD
85
#Slow Limit
1/60
DDD
w+F
Off
DDD
X
K/Color/WB
Noise Reduct. Auto
DDD
85
Noise Filter Standard
DDD
WB Auto A : 0, G : 0
DDD
All >
All Set
DD
All Reset
D
W Keep Warm Color
On
DDD
Settings differ depending on the region where the camera is purchased.*
110
EN
Information
11
Tab Function Default *1 *2 *3
g
c
#
+WB
Off
DDD
85
Color Space sRGB
DDD
Shading Comp. Off
DDD
K Set
DDD
86
Pixel
Count
Xiddle
2560×1920
DDD
Wmall
1280×960
Y
Record/Erase
Quick Erase Off
DDD
86RAW+JPEG Erase RAW+JPEG
DDD
File Name Auto
D
Edit Filename Off
D
87
Priority Set No
DD
dpi Setting Auto
D
Copyright
Settings
Copyright Info. Off
D
Artist Name
Copyright Name
Z
Movie
nMode P
DD
87Movie+Still Off
DDD
Movie R
On
DDD
b K Utility
Pixel Mapping
88
Exposure
Shift
p
±0
DDD
J
5
8 Warning Level
±0
D
Level Adjust
D
Touch Screen Settings On
DD
Eye-Fi Off
DD
# Accessory Port Menu
Tab Function Default *1 *2 *3
g
#A
OLYMPUS PENPAL Share
Please Wait 71, 90
Address
Book
Address List
90
Search Timer 30 sec
D
New Pairing
My OLYMPUS PENPAL
Picture Send Size Size 1: Small
D
B
OLYMPUS PENPAL Album
Copy All
90
Reset Protect
Album Mem. Usage
Album Mem. Setup
Picture Copy Size Size 2: Medium
D
C
Electronic View nder
EVF Adjust
j ±0, k ±0
DD
90
111
EN
Information
11
Speci cations
Camera
Product type
Product type Digital camera with interchangeable lens system
Lens M.Zuiko Digital, Micro Four Thirds System Lens
Lens mount Micro Four Thirds mount
Equivalent focal length on
a 35 mm lm camera
Approx. twice the focal length of the lens
Image pickup device
Product type 4/3" Live MOS sensor
No. of total pixels Approx. 13,060,000 pixels
No. of effective pixels Approx. 12,300,000 pixels
Screen size 17.3 mm (H) × 13.0 mm (V)
Aspect ratio 1.33 (4:3)
Live view
Sensor Uses Live MOS sensor
Field of view 100%
Monitor
Product type 3.0 organic electro-luminescent display, touch screen
Total no. of pixels Approx. 610,000 dots (aspect ratio 3 : 2)
Shutter
Product type Computerized focal-plane shutter
Shutter 1/4000 - 60 sec., Bulb shooting
Auto focus
Product type Imager contrast detection system
Focusing points 35 points
Selection of focusing point Auto, Optional
Exposure control
Metering system TTL metering system (imager metering)
Digital ESP metering/Center weighted averaging metering/Spot metering
Metered range EV–1 - 18 (Digital ESP metering/Center weighted averaging metering/
Spot metering)
Shooting modes
A: iAUTO/P: Program AE (Program shift can be performed)/
A: Aperture priority AE/S: Shutter priority AE/M: Manual/ART: Art lter/
SCN: Scene/n: Movie
ISO sensitivity 200 - 12800 (1/3, 1 EV step)
Exposure compensation ±3 EV (1/3, 1/2, 1 EV step)
White balance
Product type Image pickup device
Mode setting Auto/Preset WB (6 settings)/Customized WB/One-touch WB
Recording
Memory SD/SDHC/SDXC/Eye-Fi card
Recording system Digital recording, JPEG (in accordance with Design rule for Camera File
system (DCF)), RAW Data, MP format
Applicable standards Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching III,
PictBridge
Sound with still pictures Wave format
Movie AVI Motion JPEG/AVCHD
Audio PCM 48kHz/Dolby Digital
Playback
Display format Single-frame playback/Close-up playback/Index display/Calendar display
112
EN
Information
11
Drive
Drive mode Single-frame shooting/Sequential shooting/Self-timer
Sequential shooting 3 frames/sec.
Self-timer Operation time: 12 sec., 2 sec.
Flash
Guide number 10 (ISO200)
Flash control mode TTL-AUTO (TTL pre- ash mode)/MANUAL
Sync speed 1/180 s or slower
External connector
Multi-connector (USB connector, AV connector)/HDMI mini connector (Type C)/Accessory port
Power supply
Battery Li-ion Battery ×1
Dimensions/weight
Dimensions 122.0 mm (W) × 69.1 mm (H) × 34.3 mm (D) (4.8" × 2.7" × 1.6")
(excluding protrusions)
Weight Approx. 369 g (0.8 Ib.) (including battery and memory card)
Operating environment
Temperature 0 °C - 40 °C (32 °F - 104 °F) (operation)/ 20 °C - 60 °C (– 4 °F - 140 °F)
(storage)
Humidity 30% - 90% (operation)/10% - 90% (storage)
HDMI, the HDMI logo and High-De nition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
Battery/charger
Lithium ion battery
MODEL NO. BLS-1 (PS-BLS1) BLS-5
Product type Rechargeable Lithium ion battery
Nominal voltage DC 7.2 V
Nominal capacity 1150 mAh
No. of charge and discharge times Approx. 500 times (varies with usage conditions)
Ambient temperature 0 °C - 40 °C (32 °F - 104 °F) (charging)
Dimensions Approx. 35.5 mm (W) × 12.8 mm (H) × 55 mm (D) (1.4" × 0.5" × 2.2")
Weight Approx. 46 g (0.1 Ib.) Approx. 44 g (0.1 Ib.)
Lithium ion charger
MODEL NO. BCS-1 (PS-BCS1) BCS-5
Rated input AC 100 V - 240 V (50/60 Hz)
Rated output DC 8.35 V, 400 mA
Charging time Approx. 3 hours 30 minutes (room temperature)
Ambient temperature
0 °C - 40 °C (32 °F - 104 °F) (operation)/
–20 °C - 60 °C (–4 °F - 140 °F) (storage)
Dimensions Approx. 62 mm (W) × 38 mm (H) × 83 mm (D) (2.4" × 1.5" × 3.3")
Weight (without AC cable) Approx. 72 g (0.2 Ib.) Approx. 70 g (0.2 Ib.)
The AC cable supplied with this device is for use only with this device and should not be
used with other devices. Do not use cables for other devices with this device.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OR
OBLIGATION ON THE PART OF THE MANUFACTURER.
113
EN
SAFETY PRECAUTIONS
12
12
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL.
An exclamation mark enclosed in a triangle alerts you to important operating
and maintenance instructions in the documentation provided with the
product.
DANGER
If the product is used without observing the information given under this
symbol, serious injury or death may result.
WARNING
If the product is used without observing the information given under this
symbol, injury or death may result.
CAUTION
If the product is used without observing the information given under this
symbol, minor personal injury, damage to the equipment, or loss of valuable
data may result.
WARNING!
TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER DISASSEMBLE, EXPOSE
THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT.
General Precautions
Read All Instructions — Before you use the
product, read all operating instructions. Save all
manuals and documentation for future reference.
CleaningAlways unplug this product from
the wall outlet before cleaning. Use only a damp
cloth for cleaning. Never use any type of liquid or
aerosol cleaner, or any type of organic solvent to
clean this product.
Attachments — For your safety, and to avoid
damaging the product, use only accessories
recommended by Olympus.
Water and Moisture — For precautions on
products with weatherproof designs, read the
weatherproo ng sections.
Location — To avoid damage to the product,
mount the product securely on a stable tripod,
stand, or bracket.
Power Source — Connect this product only to
the power source described on the product label.
Foreign Objects — To avoid personal injury,
never insert a metal object into the product.
Heat — Never use or store this product near
any heat source such as a radiator, heat register,
stove, or any type of equipment or appliance that
generates heat, including stereo ampli ers.
Product Handling Precautions
WARNING
Do not use the camera near ammable or
explosive gases.
Do not use the ash and LED on people
(infants, small children, etc.) at close
range.
You must be at least 1 m (3 ft.) away from
the faces of your subjects. Firing the ash
too close to the subject's eyes could cause
a momentary loss of vision.
Keep young children and infants away
from the camera.
Always use and store the camera out of
the reach of young children and infants to
prevent the following dangerous situations
which could cause serious injury:
Becoming entangled in the camera strap,
causing strangulation.
Accidentally swallowing the battery, cards
or other small parts.
SAFETY PRECAUTIONS
114
EN
SAFETY PRECAUTIONS
12
Accidentally ring the ash into their own
eyes or those of another child.
Accidentally being injured by the moving
parts of the camera.
Do not look at the sun or strong lights
with the camera.
Do not use or store the camera in dusty or
humid places.
Do not cover the ash with a hand while
ring.
CAUTION
Stop using the camera immediately if
you notice any unusual odors, noise, or
smoke around it.
Never remove the batteries with bare
hands, which may cause a re or burn your
hands.
Never hold or operate the camera with
wet hands.
Do not leave the camera in places where
it may be subject to extremely high
temperatures.
Doing so may cause parts to deteriorate
and, in some circumstances, cause the
camera to catch re.
Do not use the charger if it is covered (such
as a blanket). This could cause overheating,
resulting in re.
Handle the camera with care to avoid
getting a low-temperature burn.
When the camera contains metal parts,
overheating can result in a low-temperature
burn. Pay attention to the following:
When used for a long period, the camera
will get hot. If you hold on to the camera
in this state, a low temperature burn may
be caused.
In places subject to extremely cold
temperatures, the temperature of the
camera's body may be lower than the
environmental temperature. If possible,
wear gloves when handling the camera in
cold temperatures.
Be careful with the strap.
Be careful with the strap when you carry
the camera. It could easily catch on stray
objects - and cause serious damage.
Battery Handling Precautions
Follow these important guidelines to prevent
batteries from leaking, overheating, burning,
exploding, or causing electrical shocks or burns.
DANGER
The camera uses a lithium ion battery
speci ed by Olympus. Charge the battery
with the speci ed charger. Do not use any
other chargers.
Never heat or incinerate batteries.
Take precautions when carrying or storing
batteries to prevent them from coming into
contact with any metal objects such as
jewelry, pins, fasteners, etc.
Never store batteries where they will be
exposed to direct sunlight, or subjected to
high temperatures in a hot vehicle, near a
heat source, etc.
To prevent causing battery leaks or damaging
their terminals, carefully follow all instructions
regarding the use of batteries. Never attempt
to disassemble a battery or modify it in any
way, by soldering, etc.
If battery uid gets into your eyes, ush
your eyes immediately with clear, cold
running water and seek medical attention
immediately.
Always store batteries out of the reach of
small children. If a child accidentally swallows
a battery, seek medical attention immediately.
Should you notice that the charger is emitting
smoke, heat, or an unusual noise or smell,
immediately cease use and unplug the
charger from the power outlet, and then
contact an authorized distributor or service
center.
WARNING
Keep batteries dry at all times.
To prevent batteries from leaking,
overheating, or causing a re or explosion,
use only batteries recommended for use with
this product.
Insert the battery carefully as described in the
operating instructions.
If rechargeable batteries have not been
recharged within the speci ed time, stop
charging them and do not use them.
Do not use a battery if it is cracked or broken.
If a battery leaks, becomes discolored or
deformed, or becomes abnormal in any other
way during operation, stop using the camera.
If a battery leaks uid onto your clothing
or skin, remove the clothing and ush the
affected area with clean, running cold water
immediately. If the uid burns your skin, seek
medical attention immediately.
Never subject batteries to strong shocks or
continuous vibration.
CAUTION
Before loading, always inspect the battery
carefully for leaks, discoloration, warping, or
any other abnormality.
The battery may become hot during
prolonged use. To avoid minor burns, do not
remove it immediately after using the camera.
Always unload the battery from the camera
before storing the camera for a long period.
115
EN
SAFETY PRECAUTIONS
12
This camera uses a lithium ion battery
speci ed by Olympus. Do not use any other
type of battery. For safe and proper use, read
the battery's instruction manual carefully
before using it.
If the battery's terminals get wet or greasy,
camera contact failure may result. Wipe the
battery well with a dry cloth before use.
Always charge a battery when using it for
the rst time, or if it has not been used for a
long period.
When operating the camera with battery
power at low temperatures, try to keep
the camera and spare battery as warm as
possible. A battery that has run down at
low temperatures may be restored after it is
warmed at room temperature.
The number of pictures you can take may
vary depending on the shooting conditions
or battery.
Before going on a long trip, and especially
before traveling abroad, purchase extra
batteries. A recommended battery may be
dif cult to obtain while traveling.
When the camera will not be used for an
extended period, store it in a cool place.
Please recycle batteries to help save our
planet’s resources. When you throw away
dead batteries, be sure to cover their
terminals and always observe local laws and
regulations.
Caution for Usage Environment
To protect the high-precision technology
contained in this product, never leave the
camera in the places listed below, no matter if
in use or storage:
Places where temperatures and/or
humidity are high or go through extreme
changes. Direct sunlight, beaches, locked
cars, or near other heat sources (stove,
radiator, etc.) or humidi ers.
In sandy or dusty environments.
Near ammable items or explosives.
In wet places, such as bathrooms or
in the rain. When using products with
weatherproof designs, read their manuals
as well.
In places prone to strong vibrations.
Never drop the camera or subject it to severe
shocks or vibrations.
When mounted on a tripod, adjust the
position of the camera with the tripod head.
Do not twist the camera.
Do not leave the camera pointed directly
at the sun. This may cause lens or shutter
curtain damage, color failure, ghosting on
the image pickup device, or may possibly
cause res.
Do not touch electric contacts on cameras
and interchangeable lenses. Remember to
attach the body cap when removing the lens.
Before storing the camera for a long period,
remove the battery. Select a cool, dry location
for storage to prevent condensation or
mold from forming inside the camera. After
storage, test the camera by turning it on and
pressing the shutter release button to make
sure that it is operating normally.
The camera may malfunction if it is used in
a location where it is subject to a magnetic/
electromagnetic eld, radio waves, or high
voltage, such as near a TV set, microwave,
video game, loud speakers, large monitor
unit, TV/radio tower, or transmission towers.
In such cases, turn the camera off and on
again before further operation.
Always observe the operating environment
restrictions described in the camera's
manual.
Do not directly touch or wipe the image
pickup device of the camera.
Monitor
An organic electro-luminescent display is used
on the rear of the camera.
Prolonged display of a single image may
burn the image into the display, resulting in
decreased brightness or mottling in some
areas of the monitor. In some cases this
effect may be permanent. Image data are not
affected.
In the unlikely event of the monitor breaking,
do not put the organic substance into your
mouth. Any of the material adhering to your
hands, feet, or clothing should be rinsed off
immediately.
A strip of light may appear on the top/bottom
of the monitor, but this is not a malfunction.
When a subject is viewed diagonally in the
camera, the edges may appear zigzagged on
the monitor. This is not a malfunction; it will
be less noticeable in playback mode.
In places subject to low temperatures, the
monitor may take a long time to turn on or its
color may change temporarily.
When using the camera in extremely cold
places, it is a good idea to occasionally place
it in a warm place. An monitor exhibiting poor
performance due to low temperatures will
recover in normal temperatures.
The monitor is made with high-precision
technology. However, black spots or bright
spots of light may appear constantly on the
monitor.
Due to its characteristics or the angle at
which you are viewing the monitor, the spot
may not be uniform in color and brightness.
This is not a malfunction.
116
EN
SAFETY PRECAUTIONS
12
Lens
Do not immerse in water or splash with water.
Do not drop or exert strong force on the lens.
Do not hold at the moving part of the lens.
Do not touch the lens surface directly.
Do not touch the contact points directly.
Do not subject to abrupt temperature
changes.
The operating temperature range is –10 °C -
40 °C (14 °F - 104 °F). Always use within this
temperature range.
Legal and Other Notices
Olympus makes no representations or
warranties regarding any damages, or
bene t expected by using this unit lawfully,
or any request from a third person, which
are caused by the inappropriate use of this
product.
Olympus makes no representations or
warranties regarding any damages or any
bene t expected by using this unit lawfully
which are caused by erasing picture data.
Disclaimer of Warranty
Olympus makes no representations or
warranties, either expressed or implied, by
or concerning any content of these written
materials or software, and in no event
shall be liable for any implied warranty of
merchantability or tness for any particular
purpose or for any consequential, incidental
or indirect damages (including but not limited
to damages for loss of business pro ts,
business interruption and loss of business
information) arising from the use or inability
to use these written materials or software
or equipment. Some countries do not allow
the exclusion or limitation of liability for
consequential or incidental damages, so the
above limitations may not apply to you.
Olympus reserves all rights to this manual.
Warning
Unauthorized photographing or use of
copyrighted material may violate applicable
copyright laws. Olympus assumes no
responsibility for unauthorized photographing,
use or other acts that infringe upon the rights of
copyright owners.
Copyright Notice
All rights reserved. No part of these written
materials or this software may be reproduced
or used in any form or by any means, electronic
or mechanical, including photocopying and
recording or the use of any type of information
storage and retrieval system, without the prior
written permission of Olympus. No liability
is assumed with respect to the use of the
information contained in these written materials
or software, or for damages resulting from
the use of the information contained therein.
Olympus reserves the right to alter the features
and contents of this publication or software
without obligation or advance notice.
FCC Notice
Radio and Television Interference
Changes or modi cations not expressly
approved by the manufacturer may void the
user's authority to operate this equipment.
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
Adjust or relocate the receiving antenna.
Increase the distance between the
camera and receiver.
Connect the equipment to an outlet on
a circuit different from that to which the
receiver is connected.
Consult your dealer or an experienced
radio/TV technician for help. Only the
OLYMPUS-supplied USB cable should
be used to connect the camera to USB
enabled personal computers (PC).
Any unauthorized changes or modi cations to
this equipment would void the user's authority to
operate it.
Use Only Dedicated
Rechargeable Battery and
Battery Charger
We strongly recommend that you use only the
genuine Olympus dedicated rechargeable battery
and battery charger with this camera.
Using a non-genuine rechargeable battery and/or
battery charger may result in re or personal
injury due to leakage, heating, ignition or damage
to the battery. Olympus does not assume any
liability for accidents or damage that may result
from the use of a battery and/or battery charger
that are not genuine Olympus accessories.
117
EN
SAFETY PRECAUTIONS
12
For customers in North and South America
For customers in USA
Declaration of Conformity
Model Number : E-P3
Trade Name : OLYMPUS
Responsible Party :
Address : 3500 Corporate Parkway, P. O. Box 610, Center Valley, PA 18034-0610, USA
Telephone Number : 484-896-5000
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
For customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
For customers in Europe
“CE” mark indicates that this product complies with the European requirements
for safety, health, environment and customer protection. “CE” mark cameras are
intended for sales in Europe.
This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate
collection of waste electrical and electronic equipment in the EU countries.
Please do not throw the equipment into the domestic refuse.
Please use the return and collection systems available in your country for the
disposal of this product.
This symbol [crossed-out wheeled bin Directive 2006/66/EC Annex II] indicates
separate collection of waste batteries in the EU countries.
Please do not throw the batteries into the domestic refuse.
Please use the return and collection systems available in your country for the
disposal of the waste batteries.
Provisions of warranty
1
If this product proves to be defective, although it has been used properly (in accordance with the
written Handling Care and Operating instructions supplied with it), during the applicable national
warranty period and has been purchased from an authorized Olympus distributor within the business
area of Olympus Europa Holding GmbH as stipulated on the website: http://www.olympus.com this
product will be repaired, or at Olympus's option replaced, free of charge. To claim under this warranty
the customer must take the product before the end of the applicable national warranty period to the
dealer where the product was purchased or any other Olympus service station within the business
area of Olympus Europa Holding GmbH as stipulated on the website: http://www.olympus.com.
During the one year period of the World Wide Guarantee the customer may turn the product in at any
Olympus service station. Please notice that not in all countries such Olympus service station exists.
2 The customer shall transport the product to the dealer or Olympus authorized service station at his
own risk and shall be responsible for any costs incurred in transporting the product.
Provisions of Guarantee
1 "OLYMPUS IMAGING CORP., Shinjuku Monolith, 2-3-1 Nishi-Shinjuku, Shinjuku-ku, Tokyo
163-0914, Japan grants a one year World Wide Guarantee. This worldwide Guarantee must be
presented at an Olympus authorized repair service station before any repair can be made under
conditions of this Guarantee. This Guarantee is valid only if the Guarantee Certi cate and proof of
purchase are presented at the Olympus repair service station. Please note that this Guarantee is
in addition to and does not affect the customer's legal warranty rights under the applicable national
legislation governing the sale of consumer goods mentioned above.
118
EN
SAFETY PRECAUTIONS
12
2 This Guarantee does not cover the following and the customer will be required to pay repair charge,
even for defects occurring within the Guarantee period referred to above.
(a) Any defect that occurs due to mishandling (such as an operation performed that is not
mentioned in the Handling Care or other sections of the instructions, etc.)
(b) Any defect that occurs due to repair, modi cation, cleaning, etc. performed by anyone other than
Olympus or an Olympus authorized service station.
(c) Any defect or damage that occurs due to transport, a fall, shock, etc. after purchase of the
product.
(d) Any defect or damage that occurs due to re, earthquake, ood damage, thunderbolt, other
natural disasters, environmental pollution and irregular voltage sources.
(e) Any defect that occurs due to careless or improper storage (such as keeping the product under
conditions of high temperature and humidity, near insect repellents such as naphthalene or
harmful drugs, etc.), improper maintenance, etc.
(f) Any defect that occurs due to exhausted batteries, etc.
(g) Any defect that occurs due to sand, mud, etc. entering the inside of the product casing.
(h) When the Guarantee Certi cate is not returned with the product.
(i) When any alterations whatsoever are made to the Guarantee Certi cate regarding the year,
month and date of purchase, the customer's name, the dealer's name, and the serial number.
(j) When proof of purchase is not presented with this Guarantee Certi cate.
3 This Guarantee applies to the product only; the Guarantee does not apply to any other accessory
equipment, such as the case, strap, lens cap and batteries.
4 Olympus's sole liability under this Guarantee shall be limited to repairing or replacing the product.
Any liability under the Guarantee for indirect or consequential loss or damage of any kind incurred
or suffered by the customer due to a defect of the product, and in particular any loss or damage
caused to any lenses, lms, other equipment or accessories used with the product or for any loss
resulting from a delay in repair or loss of data, is excluded. Compelling regulations by law remain
unaffected by this.
Notes regarding Guarantee maintenance
1 This Guarantee will only be valid if the Guarantee Certi cate is duly completed by Olympus or an
authorized dealer or other documents contain suf cient proof. Therefore, please make sure that
your name, the name of the dealer, the serial number and the year, month and date of purchase are
all completed or the original invoice or the sales receipt (indicating the dealer's name, the date of
purchase and product type) is attached to this Guarantee Certi cate. Olympus reserves the right to
refuse free-of-charge service if neither Guarantee Certi cate is completed nor the above document
is attached or if the information contained in it is incomplete or illegible.
2 Since this Guarantee Certi cate will not be re-issued, keep it in a safe place.
Please refer to the list on the web site: http:// www.olympus.com for the authorized international
Olympus service network.
Trademarks
IBM is a registered trademark of International Business Machines Corporation.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
Macintosh is a trademark of Apple Inc.
The SDHC and SDXC logos are trademarks.
Eye-Fi is a trademark of Eye-Fi, Inc.
“Shadow Adjustment Technology” function contains patented technologies from Apical
Limited.
AVCHD and the AVCHD logo are trademarks of the Sony and Panasonic corporations.
Manufactured with an implementation license from Dolby Laboratories. Dolby and the double-D logo
are trademarks of Dolby Laboratories.
Slideshow transition technology supplied by HI Corporation.
119
EN
SAFETY PRECAUTIONS
12
All other company and product names are registered trademarks and/or trademarks of their
respective owners.
Micro Four Thirds and the Micro Four Thirds logo are trademarks or registered trademarks of
OLYMPUS IMAGING Corporation in Japan, the United States, the countries of the European Union,
and other countries.
“PENPAL” is used in reference to the OLYMPUS PENPAL.
The standards for camera le systems referred to in this manual are the “Design Rule for Camera
File System/DCF” standards stipulated by the Japan Electronics and Information Technology
Industries Association (JEITA).
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN
COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO
THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL
ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC
VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
120
EN
System chart
*1 Not all lenses can be used with adapter. For details, refer to the Olympus Of cial Web Site. Also, please
note that manufacture of OM System Lenses has been discontinued.
*2 For compatible lens, refer to the Olympus Of cial Web Site.
*3 The OLYMPUS PENPAL can be used only in the region in which it was purchased. Depending on the
areas, the usage may infringe the wave regulations and may be subject to its penalty.
*4 Use only compatible battery chargers to charge rechargeable batteries.
View nder
Connection Cable
USB Cable/
AV Cable
Power Supply
*4
BCS-1/BCS-5
Li-ion Battery Charger
BLS-1/BLS-5
Li-ion Battery
Software
OLYMPUS Viewer / [ib]
Digital Photo Managing Software
VF-1
Optical View Finder
VF-2
Electronic View Finder
Case / Strap
*5
Shoulder Strap
Camera Case
MFT Retro Bag/
PEN Case Modern/
PEN Case Smart
Remote Operation
RM-UC1
Remote Cable
Accessory port devices
MAL-1
MACRO ARM LIGHT
OLYMPUS PENPAL
PP-1
*3
Communication Unit
SD/SDHC/
SDXC/
Eye-Fi
*6
Memory Card
SEMA-1
Microphone Set 1
R
L
Camera Grip
MCG-1/MCG-2
121
EN
: E-P3 compatible products
Lens
OM System Lenses
MF-2
*1
OM Adapter 2
For the latest information, please visit the Olympus website.
M.ZUIKO DIGITAL ED 12mm f2.0
M.ZUIKO DIGITAL 17mm f2.8
M.ZUIKO DIGITAL 45mm f1.8
M.ZUIKO DIGITAL 14-42mm f3.5-5.6 II R
M.ZUIKO DIGITAL ED 9-18mm f4.0-5.6
M.ZUIKO DIGITAL ED 14-150mm f4.0-5.6
M.ZUIKO DIGITAL ED 40-150mm f4.0-5.6 R
M.ZUIKO DIGITAL ED 75-300mm f4.8-6.7
Flash
SRF-11
Ring Flash Set
STF-22
Twin Flash Set
FC-1
Macro Flash Controller
FL-50R
Electronic Flash
FL-36R
Electronic Flash
FL-14
Electronic Flash
FL-300R
Electronic Flash
Converter Lens
*2
FCON-P01
Fisheye
WCON-P01
Wide
MCON-P01
Macro
Four Thirds System Lenses
MMF-2
*1
Four Thirds Adapter
: Commercially available products
*5 Some accessories may not be available in your region.
*6 Use in accordance with local regulations.
RF-11
*2
Ring Flash
TF-22
*2
Twin Flash
122
EN
Index
Symbols
W Shooting Menu 1 ...........................107
X Shooting Menu 2 ...........................107
q Playback Menu ............................107
d Setup Menu ..............................80, 108
c Custom Menu ..........................81, 108
# Accessory port menu .............. 90, 110
R AF/MF .............................................81
S Button/Dial ......................................82
T Release ...........................................83
U Disp/8/PC ..................................... 83
V Exp/p/ISO .....................................84
W # Custom .......................................85
X K/Color/WB .................................. 85
Y Record/Erase ..................................86
Z Movie ..............................................87
b K Utility .........................................88
A OLYMPUS PENPAL Share .............90
B OLYMPUS PENPAL Album .............90
C Electronic View nder ......................90
Y (Large) .............................................47
X (Middle) .....................................47, 86
W (Small) .......................................47, 86
# RC Mode .........................................93
R .......................................................65
W (Language selection) .................80
c/# Menu Display .......................80, 81
P Set Up ..........................................81
P Set Home .....................................82
I Face Priority .............................39, 82
d Lock ................................................82
G/Info Settings ..................................83
K Control Settings .............................83
q Close Up Mode ..............................84
8 (Beep sound) .................................84
# Slow Limit........................................85
# X-Sync. ...........................................85
w+F .................................................85
W Keep Warm Color .........................85
#+WB .................................................85
K Set ................................................86
8 Warning Level .............................88
R REC ................................................89
P Home ...........................................89
B (AE lock) ......................................41
ART (Art lter mode) ...........................16
SCN (Scene mode).............................17
n (Movie mode) .................................61
U (Close-up playback) .................14, 64
G (Index display) ...............................63
0 (Protecting)...................................15
A
Adding sound to still pictures R ........... 68
Address Book ................................72, 90
AE BKT ................................................57
AEL Metering .......................................84
AEL/AFL ..................................82, 88, 89
AEL/AFL Memo ...................................82
AF Area................................................37
AF illuminator.......................................82
AF Mode ........................................36, 81
AF target P ......................................37
Album Mem. Setup ..............................90
Album Mem. Usage .............................90
All > ................................................ 85
All Erase ..............................................65
All Targets ............................................37
Anti-Shock z .....................................84
Aperture priority shooting A ................ 51
Aperture value .........................12, 51, 53
ART BKT..............................................58
ART LV Mode ......................................83
Aspect..................................................67
Auto ash.............................................59
Auto focus................................12, 36, 94
Auto white balance ..............................43
123
EN
B
B&W Filter ...........................................46
Backlit LCD ....................................84, 89
Battery .......................................3, 6, 100
BGM ....................................................66
Black & White ......................................67
Bracketing............................................57
Bulb Focusing ......................................81
Bulb shooting .......................................53
Bulb Timer ...........................................84
Button Function ...................................82
C
C-AF (continuous AF) ..........................36
C-AF+TR (AF Tracking) .......................36
Calendar display ..................................63
Card ................................................. 4, 99
Card Setup ....................................65, 99
Center weighted averaging
metering H.....................................41
Color Space .........................................85
Compression rate ................................47
Continuous AF (C-AF) .........................36
Converter lenses ...............................102
Contrast ............................................... 46
Copy All ...............................................72
Copyright Settings ...............................87
Custom K ...........................................45
Custom white balance CWB................43
D
Date/time setting X...............................7
Dial Direction .......................................82
Dial Function........................................82
Digital ESP metering p .....................41
Digital Tele-converter ...........................58
Direct print ...........................................77
dpi Setting............................................87
Dust reduction .................................6, 98
E
Easy printing ........................................78
Easy shooting modes ..........................10
Edit Filename.......................................87
Effect ...................................................46
Electronic view nder..........................102
e-Portrait .............................................. 67
EV Step ...............................................84
EVF Adjust ...........................................90
Exposure compensation F ................. 40
Exposure Shift .....................................88
Eye-Fi ..................................................88
Eye-Fi card ......................................4, 99
F
File Name ............................................86
Fill-in ash # ....................................... 59
Firmware ..............................................80
FL BKT.................................................58
Flash .................................................... 59
Flash intensity control w ....................60
Flash mode # .....................................59
Flash off $ .........................................59
Focus lock ...........................................37
Focus Ring ..........................................82
Format .................................................99
Four Thirds system lenses ................100
Full-time AF .........................................81
G
Gradation ............................................. 46
Group Target ........................................37
H
HD .......................................................48
High Key ..............................................46
Histogram ......................................32, 33
Histogram Settings ..............................83
Home position p ...............................82
124
EN
I
iAUTO shooting A ............. 10, 11, 18
i-Enhance h .......................................45
Image Aspect .......................................48
Image Overlay .....................................68
Image size ...........................................47
Image Stabilizer o .............................42
INFO button ........................9, 32, 33, 34
Info Off .................................................84
Information display ........................32, 33
o (Image stabilizer) ............................42
IS Mode ...............................................89
ISO ................................................48, 84
ISO BKT ..............................................58
ISO Step ..............................................84
ISO-Auto .............................................. 84
ISO-Auto Set .......................................84
J
JPEG ...................................................47
JPEG Edit ............................................67
L
Lens ............................................... 5, 100
Level Adjust .........................................88
Level Gauge ........................................32
Lithium ion battery .................3, 100, 114
Lithium ion charger ........................3, 100
Live Control .........................................20
Live Guide ...........................................18
Live View Boost ...................................83
Low Key ...............................................46
M
Manual focus (MF)...............................36
Manual shooting M ..............................53
Metering...............................................41
MF (manual focus).........................36, 89
MF Assist .............................................82
Micro Four Thirds system lenses .......100
Mode Guide .........................................83
Monitor brightness adjustment i ......80
Monotone J ........................................45
Movie Play ...........................................62
Movie R ..........................................62, 87
Movie shooting n ......................... 13, 61
Movie+Still .....................................87, 92
MTP .....................................................75
Multi view display...........................32, 40
Multiple Exposure a ..........................56
Muted Z .............................................45
My OLYMPUS PENPAL .......................90
Myset ............................................. 35, 89
N
Natural j ............................................45
Noise Filter ..........................................85
Noise Reduct. ......................................85
NTSC ............................................. 69, 83
O
OLYMPUS PENPAL ......................71, 90
One-touch white balance k.........43, 44
P
PAL ................................................69, 83
Panorama ............................................ 54
Pict. Tone .............................................46
PictBridge ............................................77
Picture Copy Size ................................90
Picture Mode .......................................45
Picture Mode Settings .........................83
Picture Send Size ................................90
Pixel Count ..........................................86
Pixel Mapping ......................................98
Playback on TV ...................................69
Please Wait ...................................71, 90
Portrait a ............................................45
Preset white balance ...........................43
Preview ................................................ 51
Print .....................................................77
Print reservation < .............................76
Priority Set ...........................................87
Program shift % .................................50
Program shooting P ............................50
125
EN
Q
Quick Erase .........................................86
R
RAW ....................................................47
RAW Data Edit ....................................67
RAW K ..............................................89
RAW+JPEG Erase ..............................86
Rec View .............................................80
Record mode K ........................47, 107
Redeye Fix ..........................................67
Red-eye reduction ash ! ...............59
Reset Lens ..........................................81
Reset/Myset.........................................35
Reset Protect .................................65, 90
Resizing Q ........................................ 67
Rls Priority C ........................................83
Rls Priority S ........................................83
Rotate .................................................. 65
S
S-AF (single AF) ..................................36
S-AF+MF .............................................36
Saturation ......................................46, 67
SD........................................................48
SD/SDHC/SDXC card .....................4, 99
Self-timer Y ........................................49
Sepia ...................................................67
Sequential shooting j ......................49
Shading Comp. ....................................85
Shadow Adj..........................................67
Sharpness ...........................................46
Shutter priority shooting S ...................52
Shutter speed ..........................12, 52, 53
Single AF (S-AF)..................................36
Single Target ........................................37
Single-frame erase D..........................15
Single-frame shooting o ...................49
Sleep ...................................................84
Slide.....................................................66
Slideshow m......................................66
Slow synchronization (1st curtain)
#SLOW ..........................................59
Slow synchronization (1st curtain)/
Red-eye reduction ash
!SLOW .......................................59
Slow synchronization (2nd curtain)
#SLOW2/2nd Curtain .....................59
Spot metering - highlight control
IHI ................................................ 41
Spot metering - shadow control
ISH...............................................41
Spot metering I ................................41
Storage ................................................ 75
Strap ...................................................... 2
Super control panel .............................91
Super FP ash ...................................105
T
Test Picture ..........................................89
Tone control ...................................34, 40
Touch screen ...................................9, 22
Touch Screen Settings.........................88
Trimming P .................................. 67, 79
U
USB Mode ...........................................84
V
Video Out .............................................83
Vivid i ................................................ 45
Volume.................................................84
W
WB ................................................. 43, 85
WB BKT ...............................................57
White balance compensation > .....44
White balance WB ............................... 43
Z
Zoom display .......................................38
Zoom frame AF ....................................38
Premises:
Goods delivery:
Letters:
Consumer Product Division
Wendenstrasse 14 – 18, 20097 Hamburg, Germany
Tel.: +49 40 - 23 77 3-0 / Fax: +49 40 - 23 07 61
Bredowstrasse 20, 22113 Hamburg, Germany
Postfach 10 49 08, 20034 Hamburg, Germany
European Technical Customer Support:
Please visit our homepage
http://www.olympus-europa.com
or call our TOLL FREE NUMBER*:
00800 - 67 10 83 00
for Austria, Belgium, Denmark, Finland, France, Germany, Luxemburg, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom.
* Please note some (mobile) phone services / provider do not permit access or request an
additional prefix to +800 numbers.
For all not listed European Countries and in case that you can’t get connected
to the above mentioned number please make use of the following
CHARGED NUMBERS:
+49 180 5 - 67 10 83
or
+4940-237734899.
Our Technical Customer Support is available from 9 am to 6 pm MET (Monday to Friday).
A
uthorized Distributors
United Kingdom:
/Eire
Olympus Service Department
Olympus Imaging & Audio
KeyMed House
Stock Road
Southend-on-Sea
Essex
SS2 5QH
United Kingdom
Sales - 0800 111 4777
Service - 0800 111 4888
Facsimile - +44 (0)1702 445134
email - consumer@olympus.co.uk
www.olympus.co.uk
South Africa: Tudor Photographic
4th floor, Park on Long
66 Long Street
Cape Town 8001
South Africa
Tel: +27 (0) 21 423 4150
Fax: +27 (0) 21 424 4632
9am to 9pm (Monday to Friday) ET
VR729201
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Olympus Pen E-P3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Olympus Pen E-P3 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info