538318
66
Verklein
Vergroot
Pagina terug
1/108
Pagina verder
66
4
EN
Low Cut Filter A n
The recorder has a Low Cut Filter function to
minimize low-frequency sounds and record voices
more clearly. This function can reduce noise from
air conditioners, projectors and other similar
noises.
[Off]:
Disables this function.
[100Hz]:
This setting will reduce the noise generated
from air conditioners or projectors. It is effective
for indoor recording.
[300Hz]:
Use this setting when sufficient effects cannot
be obtained with the [100 Hz] setting.
N
ote
W
hen the [Input Jack] setting is set to [Line],
the Low Cut Filter function is disabled ( P.67).
Self Timer A n
The self-timer function allows a certain amount
of time to elapse after you fully press the REC (s)
button and then starts recording or shooting. Set
this function according to the purpose of recording
or shooting.
[Off]:
Disables this function.
[beep 5sec]:
A beep tone sounds for 5 seconds and the
PEAK/LED indicator light flashes from 3 seconds
before recording or shooting starts.
[beep 12sec]:
A beep tone sounds for 12 seconds and the
PEAK/LED indicator light flashes from 3 seconds
before recording or shooting starts.
[metalic5sec]:
A rhythm count tone sounds for 5 seconds and
the PEAK/LED indicator light flashes from 3
seconds before recording or shooting starts.
[metalic12sec]:
A rhythm count tone sounds for 12 seconds
and the PEAK/LED indicator light flashes from 3
seconds before recording or shooting starts.
N
otes
T
o cancel the self-timer after it starts press the
STOP (4) button.
Self-timer shooting is automatically canceled
after one shot.
When the [LED] setting is set to [Off], the LED
does not flash during self-timer operation. After
the time set for the self-timer elapses, recording
or shooting starts automatically ( P.73).
When the [Beep] setting is set to [Off], beep
does not sound during self-timer operation.
After the time set for the self-timer elapses,
recording or shooting starts automatically (
P.73).
Notes
T
he recording level will be automatically
adjusted when the recording level is set to
[Auto]. Set the recording level to [Manual] to
use the recording level adjustment feature.
When the unit is set to [Auto], the limiter
function will be disabled. When a loud sound
is produced the level meter will swing all the
way over to the right while recording and the
PEAK/LED indicator light will turn on. When
this happens the sound will be recorded in a
distorted manner since the recording level is too
high. If sound distortions do not disappear even
after the recording level has been adjusted,
change the setting for microphone sensitivity
( P.65) and adjust the recording level again.
If too big sound is input, the noise may occur even
if [Rec Level] is set to [Auto] or [Limiter ON].
The level can be adjusted from [01] to [12]. The
higher the number, the higher the level and the
larger the indicator position on the level meter.
Menu setting method
Menu setting method
66

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Olympus LS-20M bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Olympus LS-20M in de taal/talen: Engels als bijlage per email.

De handleiding is 3,77 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Olympus LS-20M

Olympus LS-20M Gebruiksaanwijzing - Nederlands - 108 pagina's

Olympus LS-20M Gebruiksaanwijzing - Deutsch - 108 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info