42
EN
Q The light control range is not displayed on the control panel. What
is wrong?
A The light control range is not displayed in the following cases:
When the extension tube EX-25 (optional) is used.
When the lens has been removed.
In bounce shooting.
When the ISO sensitivity and aperture value are out of the setting range.
Q The flash wasn’t emitted when shooting in RC mode. What is
wrong?
A Verify that the camera and the electronic flash are set to the same
channel and that the group is set correctly (g P. 34).
Q How can I find out if my camera is compatible with wireless flash?
A You can use the RC mode only with cameras compatible with the
Olympus wireless RC flash system. With other cameras you may
be able to use the electronic flash as slave flash if the camera’s
built-in flash can be set to slave flash mode or manual flash mode.
For details, refer to the camera’s instruction manual.
Q When the Olympus digital camera entered the sleep mode, the
control panel on the electronic flash turned off as well. Is this
normal?
A Yes, it is normal. When the camera enters the sleep mode, the
FL-36R does as well. When the camera wakes up, so does the
FL-36R. After approximately 15 minutes in sleep mode, the FL-36R
turns off. In such a case, press the POWER button to turn the
FL-36R back on.
Q Does the FL-36R also turn off when the Olympus digital camera is
turned off?
A When the camera is turned off, the FL-36R enters the sleep mode.
After approximately 15 minutes, the FL-36R automatically turns off.
In such a case, press the POWER button to turn the FL-36R back
on.
r2067_e_000_cs2j.indb 42r2067_e_000_cs2j.indb 42 2007/10/01 10:49:552007/10/01 10:49:55
