658548
156
Verklein
Vergroot
Pagina terug
1/162
Pagina verder
Table of Contents
Quick task index
1. Preparation
2. Shooting
3. Playback
4. Menu functions
5.
Connecting the camera to a
smartphone
6.
Connecting the camera to a
computer and a printer
7. Cautions
8. Information
9. SAFETY PRECAUTIONS
Thank you for purchasing an Olympus digital camera. Before you start to use your new camera,
please read these instructions carefully to enjoy optimum performance and a longer service life.
Keep this manual in a safe place for future reference.
We recommend that you take test shots to get accustomed to your camera before taking important
photographs.
The screen and camera illustrations shown in this manual were produced during the development
stages and may differ from the actual product.
If there are additions and/or modifications of functions due to firmware update for the camera, the
contents will differ. For the latest information, please visit the Olympus website.
Instruction Manual
DIGITAL CAMERA
Model No.: IM001
2
EN
Indications used in this manual
The following symbols are used throughout this manual.
%
Tips
Useful information and hints that will help you get the most out of
your camera.
g
Reference pages describing details or related information.
This notice concerns the supplied ash unit and is chie y directed to users in
North America.
Information for Your Safety
IMPORTANT SAFETY
INSTRUCTIONS
When using your photographic equipment, basic safety precautions should always be
followed, including the following:
Read and understand all instructions before using.
Close supervision is necessary when any ash is used by or near children. Do not leave
ash unattended while in use.
Care must be taken as burns can occur from touching hot parts.
Do not operate if the ash has been dropped or damaged - until it has been examined by
quali ed service personnel.
• Let ash cool completely before putting away.
To reduce the risk of electric shock, do not immerse this ash in water or other liquids.
To reduce the risk of electric shock, do not disassemble this ash, but take it to quali ed
service personnel when service or repair work is required. Incorrect reassembly can
cause electric shock when the ash is used subsequently.
The use of an accessory attachment not recommended by the manufacturer may cause a
risk of re, electric shock, or injury to persons.
SAVE THESE INSTRUCTIONS
3
EN
Table of Contents
Quick task index 7
Names of parts 10
Preparation 12
Unpack the box contents ...........12
Charging and inserting the
battery .........................................13
Inserting the card .......................14
Attaching a lens to the
camera ......................................... 15
Power on .....................................16
Setting the date/time ..................17
Shooting 18
Information displays while
shooting ......................................18
Monitor display when
shooting ....................................18
Switching the information
display ......................................19
Shooting still pictures ................20
Taking high angle and low
angle shots ...............................22
Letting the camera choose the
settings (A) .........................22
Shooting in scene mode
(SCN) ......................................24
Using art lters (ART) ..............26
Using PHOTO STORY (J) ......28
Letting the camera choose
aperture and shutter speed
(P program mode) ....................30
Choosing aperture
(A aperture-priority mode) .......31
Choosing shutter speed
(S shutter-priority mode) ..........32
Choosing aperture and shutter
speed (M manual mode) ..........33
Shooting with long exposure
time (BULB/TIME) ....................33
Live composite photography
(dark and light eld
composite) ................................34
Shooting with touch screen
operations ................................. 35
Recording movies ......................36
Using movie mode
(n) ............ 37
Taking photographs during
movie recording
(Movie+Photo Mode) ................38
Shooting “My Clips” ..................39
Editing “My Clips” .....................40
Self-portraits ...............................42
Using shooting options .............44
Calling shooting options ...........44
Controlling exposure
(exposure compensation) .........45
Setting the AF target
(AF Area) ..................................46
Using small target and group
target (Setting AF target) ..........46
Face priority AF/pupil detection
AF .............................................47
Zoom frame AF/zoom AF
(Super Spot AF) ........................48
Choosing a focus mode
(AF mode).................................49
Changing the brightness of
highlights and shadows ............50
Choosing how the camera
measures brightness
(metering) .................................50
ISO sensitivity ...........................51
Adjusting color
(white balance) .........................52
Table of Contents
4
EN
Table of Contents
Reducing camera shake
(image stabilizer) ......................53
Sequential shooting/using the
self timer ...................................54
Setting the image aspect ..........56
Selecting image quality
(still image quality mode) ..........56
Selecting image quality
(movie image quality mode) .....57
Using a ash
( ash photography)...................58
Adjusting ash output
( ash intensity control)..............60
Processing options
(picture mode) ..........................61
Movie sound options
(recording sound with
movies) .....................................62
Adding effects to a movie .........62
Playback 64
Information display during
playback ......................................64
Playback image information .....64
Switching the information
display ......................................65
Viewing photographs and
movies .........................................66
Index display/
Calendar display .......................67
Viewing still images ..................67
Volume......................................68
Watching movies ......................69
Protecting images .....................69
Erasing images .........................69
Setting a transfer order on
images (Share Order) ...............70
Selecting images
([0], [Erase Selected],
[Share Order Selected])............70
Audio recording ........................70
Adding still pictures to My Clips
(Add to My Clips) .....................70
Using the touch screen ..............71
Selecting and protecting
images ......................................71
Menu functions 72
Basic menu operations ..............72
Using Shooting Menu 1/
Shooting Menu 2 ........................73
Formatting the card
(Card Setup) .............................73
Deleting all images
(Card Setup) .............................73
Returning to default settings
(Reset) ...................................... 74
Registering Favorites settings
(Myset)......................................74
Processing options
(Picture Mode) ..........................75
Image quality (K) ...................76
Digital Zoom
(Digital Tele-converter) .............76
Setting the self timer (j/Y) ...77
Varying settings over a series of
photographs (bracketing)..........78
Taking HDR (High Dynamic
Range) images .........................80
Recording multiple exposures
in a single image
(multiple exposure) ...................81
Shooting automatically with a
xed interval
(Time lapse shooting) ...............82
Wireless remote control ash
photography..............................83
Using the playback menu ..........84
Displaying images rotated
(R) .......................................... 84
Editing still images ....................84
Canceling all protections ..........86
Using the setup menu ................87
X(Date/time setting) ................87
W (Changing the display
language)..................................87
5
EN
Table of Contents
i (Monitor brightness
adjustment) ............................... 87
Rec View ..................................87
Wi-Fi Settings ...........................87
c/# Menu Display ..................87
Firmware...................................87
Using the custom menus ...........88
R AF/MF ..................................88
S Button/Dial ...........................89
T Release/j/Image
Stabilizer ................................... 89
U Disp/8/PC ..........................90
V Exp/p/ISO ..........................91
W # Custom ............................92
X K/Color/WB ....................... 93
Y Record/Erase .......................94
Z Movie ...................................95
b K Utility ..............................96
AEL/AFL ...................................97
MF Assist ..................................97
Assigning functions to buttons
(Button Function) ......................98
Viewing camera images on
TV ...........................................100
Choosing the control
panel displays
(KControl Settings) ..............102
Adding information displays....105
Shutter speeds when the ash
res automatically ...................106
Combinations of movie image
sizes and compression
rates........................................106
Accessory Port Menu ...............107
Using OLYMPUS PENPAL .....107
A OLYMPUS PENPAL
Share ......................................108
B OLYMPUS PENPAL
Album .....................................109
C Electronic View nder .........109
Connecting the camera to a
smartphone 110
Connecting to a smartphone ... 111
Transferring images to a
smartphone ...............................112
Shooting remotely with a
smartphone ...............................112
Adding position information to
images ....................................... 113
Changing the connection
method ......................................114
Changing the password ...........114
Cancelling a share order ......... 115
Initializing wireless LAN
settings ......................................115
Connecting the camera to a
computer and a printer 116
Connecting the camera to a
computer ................................... 116
Copying pictures to a
computer ................................... 116
Installing the PC software ....... 117
Direct printing (PictBridge) ..... 119
Easy printing ........................... 119
Custom printing ......................120
Print reservation (DPOF) .........121
Creating a print order..............121
Removing all or selected
pictures from the print order ...122
6
EN
Table of Contents
Cautions 123
Battery and charger .................123
Using your charger abroad .....123
Usable cards .............................124
Record mode and le size/
number of storable still
pictures .....................................125
Interchangeable lenses ............126
External ash units designated
for use with this camera ..........127
Wireless remote control ash
photography............................127
Other external ash units ........128
Electronic View nder (VF-4) ....129
Principal Accessories ..............129
System chart .............................130
Cleaning and storing the
camera ....................................... 132
Cleaning the camera ..............132
Storage ...................................132
Cleaning and checking the
image pickup device ...............132
Pixel Mapping - Checking the
image processing functions ....133
Information 134
Shooting tips and
information ................................134
Error codes ...............................136
Menu directory ..........................138
Speci cations ...........................144
SAFETY PRECAUTIONS 147
SAFETY PRECAUTIONS ..........147
Index 157
7
EN
Quick task index
Shooting
g
Just shoot without making any dif cult
settings
A
22
Shooting in the way you want without
needing to know technical terms
Live Guide 22
Taking self-portraits
Self-portraits 42
Taking arty pictures
Art lter 26
Quickly matching settings to the scene
SCN 24
Blurring the background
Live Guide 22
A Aperture priority shooting
31
Shooting night views
SCN (Hand-Held Starlight) 24
Taking pictures of reworks
SCN (Fireworks) 24
Taking pictures of stars and trajectories
of light
Live composite photography 34
Adjusting the brightness of highlights and
shadows
Exposure compensation 45
Taking photos without the ash
ISO sensitivity 51
Reducing camera shake
Image Stabilizer
53
Anti-shock
92
Self-timer 54
Remote cable 127
Taking pictures of a subject against
backlight
Flash shooting 58
Spot metering 50
Using the self-timer
Self-timer 54
Shooting sequentially
Sequential shooting 54
Taking pictures that stop the subject in
motion or convey a sense of motion
Live Guide 22
S Shutter priority shooting
32
Changing an aspect ratio
Aspect ratio 56
Quick task index
8
EN
Quick task index
Adjusting color White balance 52
Shooting in monochrome or sepia
Picture Mode 61
Changing the picture contrast
Picture Mode 61
Focusing on a subject
Tap AF 35
Focusing by indicating a small area on
the screen
Zoom frame AF/zoom AF 48
Keeping a moving subject in focus
C-AF+TR 49
Focusing on and shooting a moving
subject
C-AF 49
Creating a short movie by combining
movie scenes
Clips 39
Reducing image noise (mottling)
Noise Reduct. 91
Optimizing the monitor/Adjusting the
monitor contrast
Monitor brightness
adjustment
87
Checking horizontal or vertical orientation
before shooting
Level gauge 19
Shooting with deliberate composition
Displayed Grid 90
Conserving battery power
Sleep 91
Increasing the number of pictures that
can be taken
Still image quality mode 56
Shooting remotely with a smartphone
Shooting remotely with a
smartphone
112
9
EN
Quick task index
Playback
g
Viewing images on a TV
HDMI 90
Video Out 90
Playback on TV 100
Dealing with red-eye
Redeye Fix (JPEG Edit) 85
Printing
Creating a print order 121
Direct printing 119
Transferring images to a smartphone
Transferring images to a
smartphone
112
Adding location data to images
Adding location data to images
113
Camera Settings
g
Synchronizing the date and time Setting the date/time 17
Restoring default settings
Reset 74
Saving the settings
Myset 74
Changing the menu display language
W(Changing the display
language)
87
Turning off the auto focus sound
8 (Beep sound)
91
10
EN
Names of parts
Names of parts
1
2
3
4
5
6
7
5
8
9
0
a
b
d
c
e
g
f
h
i
1 Mode dial ........................................P. 20
2 Shutter button .................................P. 21
3 ON/OFF button ..............................P. 16
4 Control dial* (P) ......... P. 31-33, 45, 66
5 Strap eyelet.....................................P. 12
6 Lens attachment mark ....................P. 15
7 Mount (Remove the body cap before
attaching the lens.)
8 Hot shoe cover
9 Stereo microphone .............P. 62, 70, 86
0 Self-timer lamp/AF illuminator
...............................................P. 54/P. 88
a Lens release button ........................P. 15
b Lens lock pin
c Tripod socket
d Battery/card compartment lock .......P. 13
e Battery/card compartment cover.....P. 13
f Connector cover
g Multi-connector ............. P. 100, 116, 119
h HDMI connector (Type D) .............P. 100
i Card slot .........................................P. 14
* In this manual, the P icon represent operations performed using the control dial.
11
EN
Names of parts
4
5
6
7
9
8
0
a
b
c
2
1
3
F (Up) / F (Exposure compensation)
button (P. 45)
I (Right) /# (Flash)
button (P. 58)
G (Down) / jY
(Sequential shooting/Self-timer)
button (P. 54)
H (Left) / P (AF
target) button (P. 46)
z button (P. 44, 72)
1 Speaker
2 Monitor ....................P. 18, 42, 44, 64, 71
3 Accessory port ......................P. 107, 143
4 Hot shoe .......................................P. 127
5 Fn/G button ...................P. 98/P. 40, 67
6 U button ...................................P. 38, 48
7 R (Movie)/H button ........P. 36, 98/P. 70
8 MENU button .................................P. 72
9 INFO (Information display) button
..................................................P. 19, 65
0 z button .................................P. 44, 72
a Arrow pad* ................................P. 17, 66
b q (Playback) button ......................P. 66
c (Erase) button ............................P. 69
* In this manual, the FGHI icons represent operations performed using the arrow pad.
12
EN
Preparation
1
1
Preparation
Unpack the box contents
The following items are included with the camera.
If anything is missing or damaged, contact the dealer from whom you purchased the
camera.
Camera Body cap Strap USB cable
CB-USB6
CD-ROM (Instruction manual/
Computer software)
Flash
FL-LM1
Lithium ion battery
BLS-50
Lithium ion charger
BCS-5
Flash case Instruction manual (this manual) Warranty card
Attaching the strap
1 2
3
Attach the strap on the other side in the same way.
Lastly, pull the strap rmly, making sure that it is fastened securely.
13
EN
Preparation
1
Charging and inserting the battery
1
Charging the battery.
Charging indicator
Charging in
progress
Lights orange
Charging
complete
Off
Charging error
Blinks orange
(Charging time: Up to
approximately 3 hours 30 minutes)
1
2
3
AC wall outlet
Lithium ion battery
Charging
indicator
AC cable
Direction indicating
mark (C)
Lithium ion
charger
Unplug the charger when charging is complete.
2
Opening the battery/card
compartment cover.
Battery/card compartment lock
Battery/card compartment cover
1
2
3
Loading the battery.
Direction indicating
mark
Removing the battery
Turn off the camera before opening or closing the
battery/card compartment cover. To remove the
battery, rst push the battery lock knob in the direction
of the arrow and then remove.
Contact an authorized distributor or service center if you are unable to remove the
battery. Do not use force.
It is recommended to set aside a backup battery for prolonged shooting in case the
battery in use drains.
Also read “Battery and charger” (P. 123) .
14
EN
Preparation
1
Inserting the card
The following types of SD memory card (commercially available) can be used with this
camera: SD, SDHC, SDXC, and Eye-Fi.
Eye-Fi Cards
Read “Usable cards” (P. 124) before use.
1
Open the battery/card compartment cover.
2
Slide the card in until it is locked into place.
g “Usable cards” (P. 124)
Terminal
area
1
2
Turn off the camera before loading or removing the battery or card.
Do not forcibly insert a damaged or deformed card. Doing so may damage the card
slot.
3
Closing the battery/card
compartment cover.
Be sure the battery/card
compartment cover is closed before
using the camera.
1
2
Removing the card
Press the inserted card lightly and it will be
ejected. Pull out the card.
Do not remove the battery or card
while the card write indicator (P. 18 ) is
displayed.
15
EN
Preparation
1
Attaching a lens to the camera
1
Remove the rear cap of the lens
and the body cap of the camera.
1
2
Rear cap
2
1
2
Align the lens attachment mark
(red) on the camera with the
alignment mark (red) on the
lens, then insert the lens into
the camera’s body.
Lens attachment mark
3
Rotate the lens clockwise
until you hear it click (direction
indicated by arrow 3).
3
Make sure the camera is turned off when attaching or removing the lens.
Do not press the lens release button.
Do not touch internal portions of the camera.
Removing the lens cap
1
2
1
Removing the lens from the camera
Make sure the camera is turned off when removing the lens.
While pressing the lens release button, rotate the lens in the
direction of the arrow.
2
1
Lens release button
Interchangeable lenses
Read “Interchangeable lenses” (P. 126) .
16
EN
Preparation
1
Power on
1
Press the ON/OFF button to turn on the camera.
When the camera is turned on, the monitor will turn on.
To turn off the camera, press the ON/OFF button again.
ON/OFF button
250250 F5.6
01:02:0301:02:03
3838
ISO-A
200
Wi-Fi
Monitor
Battery level
; (green): Camera ready to shoot.
(Displayed for about ten seconds after
the camera is turned on.)
: (green): Low battery
] (blinks red): Charge the battery.
Camera sleep operation
If no operations are performed for a minute, the camera enters “sleep” (stand-by) mode to
turn off the monitor and to cancel all actions. The camera activates again when you touch
any button (the shutter button, q button, etc.). The camera will turn off automatically if
left in sleep mode for 5 minutes. Turn the camera on again before use.
17
EN
Preparation
1
Setting the date/time
Date and time information is recorded on the card together with the images. The le
name is also included with the date and time information. Be sure to set the correct
date and time before using the camera. Some functions cannot be used if the date and
time have not been set.
1
Display the menus.
• Press the MENU button to display the menus.
MENU button
j
4:3
D
1
Shooting Menu 1
Card Setup
Reset/Myset
Picture Mode
Image Aspect
Back
Set
2
Digital Tele-converter Off
2
Select [X] in the [d] (setup) tab.
• Use FG on the arrow pad to select
[d] and press I.
• Select [X] and press I.
--.--.-- --:--X
W
j
±0
k
±0
2
1
Setup Menu
English
0.5sec
Wi-Fi Settings
c/#
Menu Display
Firmware
Rec View
Back
Set
[d] tab
3
Set the date and time.
• Use HI to select items.
• Use FG to change the selected item.
• Use FG to select the date format.
X
2016
YMD Time
Cancel
Y/M/D
The time is displayed using a
24-hour clock.
4
Save settings and exit.
• Press z to set the camera clock and exit to the main
menu.
• Press the MENU button to exit the menus.
If the battery is removed from the camera and the camera
is left for a while, the date and time may reset to the factory
default setting.
You can synchronize the time correctly by pressing z at a
time signal of 0 seconds while setting [min].
z button
18
EN
Shooting
2
2
Shooting
Information displays while shooting
Monitor display when shooting
Monitor display when shooting still pictures
250250 F5.6
ISO-A
400
WB
AUTO
WBWBWB
AUTOAUTOAUTO
L
N
4:3
S-AFS-AF
AEL
RC
BKT
+
2.0
+
2.0
P
+7+7
01:02:0301:02:03
10231023
-3-3
off
-
2.0
-
2.0
N
1
3
B
T
O
BBB
T
O
T
O
T
O
U
TO
U
TO
FPS
Wi-Fi
FP
28
mm
S-IS AUTOS-IS AUTO
F
FHD
y
z
A
B
C
D
x
w
v
1
g
h
i
j
k
l
m
f
e
32 654 97 0a b
r
u
qp o
s
n
dc
E
8
t
1 Card write indicator .........................P. 14
2 Wireless LAN connection...... P. 110 115
3 Super FP ash ..............................P. 127
4 RC mode.......................................P. 127
5 Auto bracket/HDR ..................P. 78 /P. 80
6 Multiple exposure............................P. 81
7 High frame rate ...............................P. 90
8 Digital Tele-converter ......................P. 76
9 Time lapse shooting ........................P. 82
0 Face priority/Eye priority .................P. 47
a Movie sound ...................................P. 62
b Zoom operation direction/
Focal length/Internal temperature
warning m ...........................P. 137
c Flash ...............................................P. 58
(blinks: charging in progress,
lights up: charging completed)
d AF con rmation mark......................P. 21
e Image stabilizer...............................P. 53
f Art lter ...........................................P. 26
Scene mode....................................P. 24
Picture mode...................................P. 61
g White balance .................................P. 52
h Sequential shooting/Self-timer/
Anti-Shock .............................P. 54 / P. 92
i Aspect ratio .....................................P. 56
j Record mode (still images) .............P. 56
k Record mode (movies) ...................P. 57
l Available recording time
m Number of storable still pictures ...P. 125
n Highlight & Shadow Control ............P. 50
o Top: Flash intensity control ......P. 60
Bottom: Exposure compensation
indicator............................P. 45
p Exposure compensation value........P. 45
q Aperture value .........................P. 30 – 33
r Shutter speed ..........................P. 30 – 33
s Histogram .......................................P. 19
t Preview ............................................P.98
u AE Lock ..........................................P. 97
v Shooting mode.........................P. 20 – 37
w Myset ..............................................P. 74
x Shooting using touch screen
operations .......................................P. 35
y Flash compensation value ..............P. 60
z ISO sensitivity .................................P. 51
A AF mode .........................................P. 49
B
Metering mode ................................P. 50
C Flash mode .....................................P. 58
D Battery check
E Live guide recall ...............................P.22
19
EN
Shooting
2
Monitor display during movie mode
Wi-Fi
28
mm
G
F
n
PP
FHD
F
M-IS ONM-IS ON
01:02:0301:02:03
ISOISO
AUTOAUTO
C-AFC-AF
H
F Shooting mode................................P. 62
G Movie effect ....................................P. 37
H Clips icon ..................................P. 39, 42
Switching the information display
You can switch the information displayed in the monitor during shooting using the
INFO button.
INFO button
INFO
INFO
Level gauge display
INFO
INFO
INFO
INFO
250250 F5.6
P
0.00.0
01:02:0301:02:03
3838
S-IS AUTO
S-IS AUTO
ISO-A
200
INFO
INFO
Information display on
Histogram display
01:02:0301:02:03
3838
250250 F5.6
P
0.00.0
L
N
S-IS AUTO
S-IS AUTO
ISO-A
200
Wi-Fi
F
FHD
Image only
01:02:0301:02:03
3838
250250 F5.6
0.00.0
L
N
S-IS AUTO
S-IS AUTO
ISO-A
200
Wi-Fi
F
FHD
Histogram display
Display a histogram showing the distribution of
brightness in the image. The horizontal axis gives
the brightness, the vertical axis the number of
pixels of each brightness in the image. Areas
above the upper limit at shooting are displayed in
red, those below the lower limit in blue, and the
area metered using spot metering in green.
More
Less
Dark Bright
Level gauge display
Indicate the orientation of the camera. The “tilt” direction is indicated on the vertical bar and
the “horizon” direction on the horizontal bar. Use the indicators on the level gauge as a guide.
20
EN
Shooting
2
Shooting still pictures
Use the mode dial to select the shooting
mode, and then shoot the image.
Indicator Mode icon
Types of shooting modes
For how to use the various shooting modes, see the following.
A ....................P. 22
SCN .....................P. 24
ART .....................P. 26
J ..........................P. 28
P ...........................P. 30
A ..........................P. 31
S ...........................P. 32
M ..........................P. 33
n .........................P. 36
1
Rotate the mode dial to choose a mode.
2
Set up the camera and decide
on the composition.
Be careful that your ngers or the
camera strap do not obstruct the
lens or AF illuminator.
Landscape position Portrait position
21
EN
Shooting
2
3
Adjust the focus.
Display the subject in the center of the monitor, and lightly press the shutter button
down to the rst position (press the shutter button halfway).
The AF con rmation mark (() will be displayed, and a green frame (AF target) will
be displayed in the focus location.
250250 F5.6
01:02:0301:02:03
3838
ISO-A
200
28
mm
Wi-Fi
Press the shutter
button halfway.
AF con rmation mark
AF target
If the AF con rmation mark blinks, the subject is not in focus. (P. 134 )
4
Release the shutter.
Press the shutter button all the way (fully).
The shutter sounds and the picture is taken.
The shot image will be displayed on the monitor.
You can focus and take pictures using touch controls. g“Shooting with touch screen
operations” (P. 35)
Pressing the shutter button halfway and all the way down
The shutter button has two positions. The act of lightly pressing the shutter button to the
rst position and holding it there is called “pressing the shutter button halfway,” that of
pressing it all the way down to the second position “pressing the shutter button all (or the
rest of) the way down.”
Press halfway
Press the rest of
the way down
22
EN
Shooting
2
Taking high angle and low angle shots
You can change the orientation and angle of the monitor.
1 Press the monitor down.
2 Adjust the angle of the monitor.
2
1
1
Lower angle Upper angle
Rotate the monitor gently within the limits shown. Do not use force; failure to observe this
precaution could damage the connectors.
Letting the camera choose the settings (A)
The camera adjusts settings to suit the scene; all you have to do is press the shutter
button. Use live guides to adjust such parameters as color, brightness, and background
blurring.
1
Set the mode dial to A.
2
Shoot.
3
To change the shooting settings, touch the tab to display the live guides.
Touch a guide item to display the slider of the level bar.
250250 F5.6
01:02:0301:02:03
3838
ISO-A
200
Wi-Fi
Tab
Change Color Saturation
Guide item
4
Use your nger to position the sliders.
• Tap
a
to enter the setting.
To cancel the live guide setting, tap
k
on the
screen.
When [Shooting Tips] is selected, select an item and
touch a to display a description.
The effect of the selected level is visible in the
display. If [Blur Background] or [Express Motions]
is selected, the display will return to normal, but the
selected effect will be visible in the nal photograph.
0
Clear & Vivid
Flat & Muted
Level bar/selection
23
EN
Shooting
2
5
To set multiple live guides, repeat Steps 3 and 4.
A check is displayed on the guide item for live
guides that are already set.
Change Color Saturation
6
Shoot.
To clear the live guide from the display, press the MENU button.
[Blur Background] and [Express Motions] cannot be set at the same time.
If [RAW] is currently selected for image quality, image quality will automatically be set to
[YN+RAW].
Live guide settings are not applied to the RAW copy.
Pictures may appear grainy at some live guide setting levels.
Changes to live guide setting levels may not be visible in the monitor.
Frame rates drop when [Blurred Motion] is selected.
• The ash cannot be used with the live guide.
Choosing live guide settings that exceed the limits of the camera exposure meters may
result in pictures that are over or underexposed.
• Pressing the Fn button displays the live guides in the default settings. To display live
guides in the P/A/S/M modes (P. 30-33), also press the Fn button.
Once the settings adjusted using live guides have been entered, the Fn button cannot be
used to redisplay the live guides. Touch the tab to display the live guides.
24
EN
Shooting
2
Shooting in scene mode (SCN)
Select a scene according to the subject.
1
Rotate the mode dial to SCN.
A menu of scene menu will be displayed. Select a scene
using the arrow pad (FG). You can also select scenes
using touch screen operations.
On the scene menu screen, press I to display details
of the scene mode on the camera monitor.
• Press z or press the shutter button halfway to select
the highlighted item and exit the scene menu.
Portrait
1
Types of scene modes
O Portrait
H
High Key
(
Fireworks
P e-Portrait
I
Low Key g Beach & Snow
L Landscape q DIS Mode fn Fisheye Effect
K Landscape+Portrait
J
Macro wn Wide-Angle
J
Sport r Nature Macro mn Macro
i
Hand-Held Starlight Q Candle T 3D Photo
G Night Scene R Sunset J Panning
U Night+Portrait T Documents
G
Children s Panorama (P. 25 )
2
Shoot.
To choose a different setting, press z to display the scene menu.
To maximize the bene ts of the scene modes, some of the shooting function settings are
disabled.
In [e-Portrait] mode, two images are recorded: an unmodi ed image and a second
image to which [e-Portrait] effects have been applied. Recording may take some time. In
addition, when the image quality mode is [RAW], the image is recorded in RAW+JPEG.
• [n Fisheye Effect], [n Wide-Angle], and [n Macro] are for use with optional converter
lenses.
Movies cannot be recorded in [e-Portrait], [Hand-Held Starlight], [Panorama], or [3D
Photo] mode.
In [Hand-Held Starlight], 8 frames are shot at one time and then combined. When the
image quality mode is [RAW], a JPEG image is combined with the rst RAW image and
recorded in RAW+JPEG.
25
EN
Shooting
2
[3D Photo] is subject to the following limitations.
[3D Photo] can be used only with a 3D lens.
The camera monitor cannot be used to playback images in 3D. Use a device that
supports 3D display.
Focus is locked. In addition, ash and self-timer also cannot be used.
Image size is xed at 1824 × 1024.
RAW photography is not available.
Frame coverage is not 100%.
In [Panning], camera movement is detected and the optimal shutter speed is controlled
when moving the camera to track a moving subject. It is convenient for shooting moving
subjects as if the background is owing.
In [Panning], J is displayed during panning detection, and I is displayed when
nothing is detected.
When using a lens with an image stabilizer switch in [Panning], turn the image stabilizer
switch off.
Suf cient panning effects may not be obtained in bright conditions. Use a commercially
available ND lter to obtain effects more easily.
Taking panoramas
If you have installed the supplied computer software, you can use it to join pictures together
to form a panorama. g “Connecting the camera to a computer and a printer” (P. 116)
1
Select [Panorama] in SCN and press z.
2
Use FGHI to choose a pan direction.
3
Take a picture, using the guides to frame the shot.
Focus, exposure, and other settings are xed at the
values for the rst shot.
250250 F5.6 38
M
4
Take the remaining images, framing each shot so that the guides overlap with
the previous picture.
[
2
]
250250 F5.6 38
M
[
3
]
Exit Exit
A panorama may include up to 10 images. A warning indicator (g) is displayed after
the tenth shot.
5
After taking the last shot, press z to end the series.
During panorama shooting, the image previously taken for position alignment will not be
displayed. With the frames or other markers for display in the images as a guide, set the
composition such that the edges of the overlapping images overlap within the frames.
Pressing z before shooting the rst frame returns to the scene mode selection menu.
Pressing z in the midst of shooting ends the sequence of panorama shooting, and
allows you to continue with the next one.
26
EN
Shooting
2
Using art lters (ART)
Using art lters, you can easily have fun with artistic effects.
Types of art lters
Pop Art I/II *
Creates an image that emphasizes the beauty of color.
Soft Focus
Creates an image that expresses a soft tone atmosphere.
Pale&Light Color I/II *
Creates an image that expresses warm light by scattering
overall light and slightly overexposing the image.
Light Tone
Creates a high-quality image by softening both shadows and
highlights.
Grainy Film I/II *
Creates an image that expresses the roughness of black and
white images.
Pin Hole I/II/III *
Creates an image that looks as if it was taken using an old or
toy camera by dimming the image perimeter.
Diorama I/II *
Creates a miniature-like image by emphasizing saturation and
contrast, and blurring unfocused areas.
Cross Process I/II *
Creates an image that expresses a surreal atmosphere.
Cross Process II creates an image that emphasizes magenta.
Gentle Sepia
Creates a high-quality image by drawing out shadows and
softening the overall image.
Dramatic Tone I/II *
Creates an image that emphasizes the difference between
brightness and darkness by partially increasing contrast.
Key Line I/II *
Creates an image that emphasizes edges and adds an
illustrative style.
Watercolor I/II *
Creates a soft, bright image by removing dark areas, blending
pale colors on a white canvas, and further softening contours.
Vintage I/II/III *
Expresses an everyday shot in a nostalgic, vintage tone using
printed lm discoloration and fading.
Partial Color I/II/III *
Impressively expresses a subject by extracting colors you
want to emphasize and keeping everything else monotone.
ART BKT
(Art Filter Bracket)
Each time the shutter is released, the camera creates copies
for all selected art lters.
* II and III are altered versions of the original (I).
27
EN
Shooting
2
1
Rotate the mode dial to ART.
A menu of art lters will be displayed. Select a lter
using the control dial (
P
) or
HI
. You can also select
lters using touch screen operations.
• Use FG to choose an effect. The effects available
vary with the selected lter (soft focus, pin-hole, frames,
white edges, starlight, lter, tone, blur, or shade effect).
• Press z or press the shutter button halfway to select
the highlighted item and exit the art lter menu.
Vintage II
ART
13
ART
13
2
Shoot.
To choose a different setting, press z or tap the ART
icon to display the art lter menu.
ART icon
250250 F5.6
01:02:0301:02:03
3838
L
N
0.00.0
ISO
400
S-IS AUTO
S-IS AUTO
Wi-Fi
FHD
F
To maximize the bene ts of the art lters, some of the shooting function settings are
disabled.
If [RAW] is currently selected for image quality, image quality will automatically be set to
[YN+RAW]. The art lter will be applied to the JPEG copy only.
Depending on the subject, tone transitions may be ragged, the effect may be less
noticeable, or the image may become more “grainy.”
Some effects may not be visible in live view or during movie recording.
Playback may differ according to the lters, effects, or movie quality settings applied.
Setting and taking partial color images
You can create images that extract only the colors that you
selected using the color ring.
Rotate the control dial (P) to select a color to extract. The
effects will be displayed in live view.
28
EN
Shooting
2
Using PHOTO STORY (J)
You can shoot a PHOTO STORY. Shoot with selected PHOTO STORY type.
1
Rotate the mode dial to J.
A PHOTO STORY menu will be displayed.
A: Standard D: Layout*
B: Speed
F: Fun Frames
C: Zoom In/Out
Q: Works in progress
* With Layout, you can set any picture mode,
including art lters, for each frame. g“Picture
mode” (P.61)
Standard1
1
2
3
4
2
Use FG to choose the theme of the PHOTO STORY.
You can display a detailed screen where you choose the variation or number of
frames by using I.
You can choose different effects, number of frames and aspect ratios for each theme.
You can also change the aspect ratio, the division pattern and the frame effect of
individual images.
Changing between variations
After pressing I, use FG to change the variation.
E
Original PHOTO STORY
F G H
PHOTO STORY with effects and aspect ratios changed from the original
PHOTO STORY.
The number of images and arrangement of image regions can be altered for
each theme of the PHOTO STORY.
You can change the frame color and frame surrounding effect in each variation.
Every theme and variation provides a different PHOTO STORY.
3
After nishing the settings, press z.
The monitor switches to PHOTO STORY display.
The subject of current frame is displayed.
Touch any of the frames not containing an image to set that frame as the current frame.
• Press the MENU button to change the theme.
4
Shoot an image for the rst frame.
The image you have shot is displayed in the rst
frame.
F5.0
0.0
0.0
1
ISO-A
200
10231023
250250
To end shooting before taking all the frames, press the MENU button, and select an
image saving method.
[Save]: Save images to an SD card and end shooting.
[Finish later]: Save images to an SD card and temporarily end shooting. Saved data
can be called and shooting can be resumed later. (P. 29 )
[Discard]: End shooting without saving images.
29
EN
Shooting
2
5
Shoot an image for the next frame.
View and shoot the subject for the next frame.
• Press to cancel the image in the directly preceding
frame and retake the shot.
Touch any frame to cancel the image in it and retake
the shot. Touch the frame, and then touch O.
F5.0
0.0
0.0
1
ISO-A
200
10231023
250250
Shot image Next frame
6
Once you have shot all the frames, press z to save the image.
During the shooting of a PHOTO STORY, the following operations are available.
Exposure compensation/Flash shooting (except when the theme is [Speed])/Live
control settings (P. 44)
To use Program Shift (%) (P. 30), assign it to the control dial with the Dial Function (P. 89).
If the camera is turned off during shooting, all the data for images up to that point is
cancelled and nothing is recorded on the memory card.
If [RAW] is currently selected for image quality, image quality will automatically be set to
[YN+RAW]. The PHOTO STORY image is saved as JPEG and the images in the frames
as RAW. RAW images are saved in [4:3].
From among the [AF Mode], [S-AF], [MF] and [S-AF+MF] can be set.
Also, the AF target is xed to a single central point.
The metering mode is xed to digital ESP metering.
The following operations are not available in PHOTO STORY mode.
Movie/Sequential shooting (except when the theme is [Speed])/Self timer/INFO
display/Face priority AF/Digital Tele-converter/Picture mode (except when the theme is
[Layout])
The following button operations are disabled.
Fn/INFO etc.
During the shooting of a PHOTO STORY, the camera will not go into sleep mode.
If you temporarily saved partway through shooting, recording space for frames not yet
taken is reserved on the SD card.
Resuming shooting of works in progress
1
Set the mode dial to J.
2
Use FG to select Works in progress Q.
Partially saved data is displayed in the index.
Q appears on partially saved data.
To display the PHOTO STORY menu, press the MENU
button.
3
Select the data with which you want to resume
shooting using the arrow pad, and press the z
button.
Shooting resumes from the previous session.
12:30
2016.04.012016.04.01
30
EN
Shooting
2
Letting the camera choose aperture and shutter speed
(P program mode)
P mode is a shooting mode where the camera automatically sets the optimal aperture
and shutter speed according to subject brightness. Set the mode dial to P.
250250 F5.6
01:02:0301:02:03
3838
L
N
P
ISO-A
200
0.00.0
S-IS AUTO
Wi-Fi
FHD
F
Shooting mode
Shutter speed
Aperture value
The shutter speed and aperture selected by the camera are displayed.
The shutter speed and aperture displays will blink if the camera is unable to achieve
correct exposure.
Warning display
example (blinking)
Status Action
60"
60"
F2.8
F2.8
The subject is too
dark.
• Use the ash.
4000
4000
F22
F22
The subject is too
bright.
The metered range of the camera is
exceeded. A commercially available ND
lter (for adjusting the amount of light) is
required.
The aperture value at the moment when its indication blinks varies with the lens type and
focal length of the lens.
Program shift (%)
In P and ART modes, you can choose different
combinations of aperture value and shutter speed without
altering exposure. Press F button (F), then rotate the
control dial (P) or press FG to set program shift so that
s” appears next to the shooting mode. To cancel program
shift, press FG until “s” is no longer displayed.
Program shift is not available when you are using a
ash or SCN mode.
250250 F5.6
01:02:0301:02:03
3838
L
N
ISO-A
200
0.00.0
S-IS AUTO
S-IS AUTO
P
s
Wi-Fi
FHD
F
Program shift
31
EN
Shooting
2
Choosing aperture (A aperture-priority mode)
Mode A is a shooting mode where you choose the aperture and let the camera
automatically adjust to the appropriate shutter speed. Rotate the mode dial to A and
then use the control dial (P) to select an aperture value.
Larger apertures (lower F-numbers) decrease depth of eld (the area in front of or
behind the focus point that appears to be in focus), softening background details.
Smaller apertures (higher F-numbers) increase depth of eld.
Aperture value
250250 F5.6
01:02:0301:02:03
3838
L
N
A
0.00.0
ISO
400
S-IS AUTO
S-IS AUTO
Wi-Fi
FHD
F
After pressing the F button (F), you can also use FG to choose the aperture.
Setting the aperture value
Decreasing aperture value  Increasing aperture value
F2.8 F4.0 F5.6 F8.0 F11
The shutter speed display will blink if the camera is unable to achieve correct
exposure.
Warning display
example (blinking)
Status Action
60"
60"
F5.6
F5.6
The subject is
underexposed.
Decrease the aperture value.
4000
4000
F5.6
F5.6
The subject is
overexposed.
Increase the aperture value.
If the warning display does not disappear,
the metered range of the camera is
exceeded. A commercially available ND
lter (for adjusting the amount of light) is
required.
The aperture value at the moment when its indication blinks varies with the lens type and
focal length of the lens.
32
EN
Shooting
2
Choosing shutter speed (S shutter-priority mode)
Mode S is a shooting mode where you choose the shutter speed and let the camera
automatically adjust to the appropriate aperture. Rotate the mode dial to S and then
use the control dial (P) to select shutter speed.
A fast shutter speed can freeze a fast action scene without any blur. A slow shutter
speed will blur a fast action scene. This blurring will give the impression of dynamic
motion.
Shutter speed
250250 F5.6
01:02:0301:02:03
3838
L
N
S
0.00.0
ISO
400
F
S-IS AUTO
S-IS AUTO
Wi-Fi
FHD
F
After pressing the F button (F), you can also use FG to choose the shutter
speed.
Setting the shutter speed
Slower shutter speed  Faster shutter speed
60" 15 30 60 125 250 4000
The aperture value display will blink if the camera is unable to achieve correct exposure.
Warning display
example (blinking)
Status Action
2000
2000
F2.8
F2.8
The subject is
underexposed.
Set the shutter speed slower.
125
125
F22
F22
The subject is
overexposed.
Set the shutter speed faster.
If the warning display does not disappear,
the metered range of the camera is
exceeded. A commercially available ND lter
(for adjusting the amount of light) is required.
The aperture value at the moment when its indication blinks varies with the lens type and
focal length of the lens.
33
EN
Shooting
2
Choosing aperture and shutter speed (M manual mode)
Mode M is a shooting mode where you choose both the aperture and shutter speed.
They can be set even in bulb, time, and live composite photography. Rotate the mode
dial to M, rotate the control dial (P) to adjust the shutter speed, and after presssing the F
button (F), rotate the control dial (P) to adjust the aperture.
Difference from correct
exposure
250250 F5.6
01:02:0301:02:03
3838
L
N
M
0.00.0
ISO
400
S-IS AUTO
S-IS AUTO
Wi-Fi
FHD
F
The exposure determined by the aperture value and shutter speed you have set, and the
difference relative to a suitable exposure measured by the camera are displayed on the
monitor.
Shutter speed can be set to values between 1/4000 and 60 seconds or to [BULB] or
[LIVE TIME], or [LIVECOMP].
Even when you have set [Noise Reduct.], noise and/or light spots may still be noticeable
in the image displayed on the monitor and shot images under certain environmental
conditions (temperature etc.) and camera settings.
Noise in images
While shooting at slow shutter speeds, noise may appear on screen. These phenomena
occur when the temperature rises in the image pickup device or image pickup device
internal drive circuit, causing current to be generated in those sections of the image pickup
device that are not normally exposed to light. This can also occur when shooting with a
high ISO setting in a high-temperature environment. To reduce this noise, the camera
activates the noise reduction function. g [Noise Reduct.] (P. 91 )
Shooting with long exposure time (BULB/TIME)
Use for night landscapes and reworks. In M mode, set the shutter speed to [BULB] or
[LIVE TIME].
Bulb photography (BULB): The shutter remains open while the shutter button is pressed.
The exposure ends when the shutter button is released.
Time photography (TIME): The exposure begins when the shutter button is pressed all
the way down. To end the exposure, press the shutter button
all the way down again.
During bulb or time photography, the screen brightness changes automatically. g “Bulb/
Time Monitor” (P. 92)
When using [LIVE TIME], the progress of the exposure will be displayed in the monitor
during shooting. The display can also be refreshed by pressing the shutter button halfway.
[Live Bulb] (P. 92 ) can be used to display the image exposure during bulb photography.
There are limits on the available ISO sensitivity settings.
To reduce camera blur, mount the camera on a sturdy tripod and use a remote cable (P. 129 ).
34
EN
Shooting
2
During shooting, there are limits on the settings for the following functions.
Sequential shooting/self-timer shooting/interval shooting/AE bracket shooting/image
stabilizer/ ash bracketing/multiple exposure* etc.
* When an option other than [Off] is selected for [Live Bulb] or [Live Time] (P. 92)
[Image Stabilizer] turns off automatically.
Live composite photography (dark and light eld composite)
You can record a composite image from multiple shots while observing changes in
bright ashes of light, such as reworks and stars, without changing the brightness of
the background.
1
Set an exposure time to be the reference in [Composite Settings] (P. 92 ).
2
In M mode, set the shutter speed to [LIVECOMP].
When the shutter speed is set to [LIVECOMP], you can display the [Composite
Settings] by pressing the MENU button.
3
Press the shutter button once to prepare for shooting.
You can shoot when a message that indicates preparations are complete is displayed
in the monitor.
4
Press the shutter button.
Live composite shooting begins. A composite image is displayed after each reference
exposure time, allowing you to observe changes in light.
During composite shooting, the screen brightness changes automatically.
5
Press the shutter button to end shooting.
The maximum length of composite shooting is 3 hours. However, the available
shooting time will vary depending on shooting conditions, and charging state of the
camera.
There are limits on the available ISO sensitivity settings.
To reduce camera blur, mount the camera on a sturdy tripod and use a remote cable (P. 129 ).
During shooting, there are limits on the settings for the following functions.
Sequential shooting/self-timer shooting/interval shooting/AE bracket shooting/image
stabilizer/ ash bracketing etc.
[Image Stabilizer] turns off automatically.
35
EN
Shooting
2
Shooting with touch screen operations
Tap
T
to cycle through touch screen settings.
250250 F5.6
01:02:0301:02:03
3030
ISO-A
200
Wi-Fi
T
Tap a subject to focus and automatically
release the shutter. This function is not
available in
n
mode.
U
Touch screen operations disabled.
V
Tap to display an AF target and focus on the
subject in the selected area. You can use the
touch screen to choose the position and size of
the focus frame. Photographs can be taken by
pressing the shutter button.
Previewing Your Subject ( V )
1
Tap the subject in the display.
An AF target will be displayed.
Use the slider to choose the size of the frame.
• Touch S to turn off the display of the AF target.
1414
1010
7
7
5x
5x
250250 F5.6
ISO-A
200
S-IS AUTOS-IS AUTO
Off
2
Use the slider to adjust the size of the AF
target, and then tap Y to zoom in at the frame
position.
• Use your nger to scroll the display when the picture
is zoomed in.
• Tap Z to cancel the zoom display.
The situations in which touch screen operations are not available include the following.
Panorama/3D/multiple exposure/during bulb, time or live composite photography/one-
touch white balance dialog/when buttons or dials are in use
Do not touch the display with your ngernails or other sharp objects.
Gloves or monitor covers may interfere with touch screen operation.
36
EN
Shooting
2
Recording movies
You can record movies when the mode dial is on any mode except J (PHOTO
STORY).
1
Press the R button to begin recording.
You can change the focus location by touching the screen while recording.
00:00:04 00:00:04
250250 F5.6
+
3.0
+
3.0
42
mm
n
Off
R button
2
Press the R button again to end recording.
When using a camera with a CMOS image sensor, moving objects may appear distorted
due to the rolling shutter phenomenon. This is a physical phenomenon whereby distortion
occurs in the lmed image when shooting a fast-moving subject or due to camera shaking.
In particular, this phenomenon becomes more noticeable when using a long focal length.
If the camera is used for extended periods, the temperature of the image pickup device
will rise and noise and colored fog may appear in images. Turn off the camera for a short
time. Noise and colored fog may also appear in images recorded at high ISO sensitivity
settings. If the temperature rises further, the camera will turn off automatically.
When using a Four Thirds system lens, the AF will not operate while recording movies.
• The R button cannot be used to record movies in the following instances:
Multiple exposure (still photography also ends.)/shutter button pressed halfway/during
bulb, time or composite photography/sequential shooting/Panorama/SCN mode
(e-Portrait, Hand-Held Starlight, 3D)/time lapse shooting
37
EN
Shooting
2
Using movie mode
(n)
With movie mode (n), you can create movies that take advantage of the effects
available in still photography mode. Use live control to select the settings. g “Adding
effects to a movie” (P. 62)
You can also apply an after-image effect or zoom in on an area of the image during
movie recording.
Adding effects to a movie [Movie Effect]
1
Rotate the mode dial to n.
2
Press the R button to begin recording.
• Press the R button again to end recording.
3
Touch the on-screen icon of the effect you wish to
use.
W
Art Fade
Film with the selected picture mode effect. The fade
effect is applied to the transition between scenes.
M
Old Film
Randomly apply damage and dust-like noise similar to
old movies.
U
Multi Echo
Apply an after-image effect. After-images will appear
behind moving objects.
T
One Shot Echo
An after-image will appear for a short time after you press
the button. The after-image will disappear automatically
after a while.
X
Movie Tele-
converter
Zoom in on an area of the image without using the lens
zoom. Zoom in on the selected position of the image
even while the camera is kept xed.
Art Fade
Touch the icon. The effect will be applied gradually when you release your nger.
Old Film
Touch the icon for the effect to be applied. Touch again to cancel the effect.
Multi Echo
Touch the icon to apply the effect. Touch again to cancel the effect.
One Shot Echo
Each touch of the icon adds to the effect.
38
EN
Shooting
2
Movie Tele-converter
1
Touch the icon to display the zoom frame.
You can change the position of the zoom frame by touching the screen or using
FGHI.
Press and hold z to return the zoom frame to a central position.
2
Touch M or press the U button to zoom in on the area in the zoom frame.
• Touch N or press the U button to return to the zoom frame display.
3
Touch O or press z to cancel the zoom frame and exit Movie tele-
converter mode.
Movie Tele-converter is not available in self-portrait mode.
The 2 effects cannot be applied simultaneously.
Use a memory card with an SD speed class of 10 or better. Movie recording may end
unexpectedly if a slower card is used.
When mode1 has been set for taking photographs during movie recording (P. 95 ), you
cannot take photographs while using other movie effects than Movie Tele-converter.
[e-Portrait] and [Diorama] cannot be used at the same time as Art Fade.
The sound of touch operations and button operations may be recorded.
Art Fade cannot be used when shooting clips.
Taking photographs during movie recording (Movie+Photo Mode)
Press the shutter button during movie recording to record one of the frames of the movie
as a photograph. To end movie recording, press the R button. The photograph and movie
les will be recorded separately to the memory card. The record mode of the photographs
will be XN (16:9).
There is also a way of recording a photograph of a higher quality. g [Movie+Photo
Mode] (P. 95 )
You cannot take photographs while recording clips when [Movie+Photo Mode] is set to
[mode1]. The number of photographs may be limited.
The autofocus and metering used in movie mode may differ from that used to take
photographs.
39
EN
Shooting
2
Shooting “My Clips”
You can create a single My Clips movie le including multiple short movies (clips). You
can also add still pictures to the My Clips movie.
Shooting
1
Rotate the mode dial to n.
2
Tap the Clips icon.
The clips icon is not displayed when the image
quality mode (P.57) is set to g (Clips).
n
01:01:0701:01:07
n
PP
FHD
F
M-IS ONM-IS ON
01:02:0301:02:03
ISOISO
AUTOAUTO
C-AFC-AF
Clips icon
You can also select Clips by pressing the z
button to display the live control. Use FG to
select the image quality mode, HI to select g
(Clips), and then press the z button.
When selecting the image quality mode, press the
INFO button to change [Clip Recording Time].
g “Movie image quality mode” (P.57)
PP
WB
AUTO
WBWBWB
AUTOAUTOAUTO
n
PP
C-AFC-AF
j
M-IS ON M-IS ON
FHD
FHD
N
HD
F
01:01:0701:01:07
FHD
FHD
F
MOV 1920x1080
3
Press the R button to start shooting.
The recording ends automatically when the preset shooting time has elapsed, and a
screen for checking the recorded movie is displayed. Press the z button to save
your clip and begin shooting the next one.
You can extend the shooting time (for up to 16 seconds) by pressing the R button
again during shooting.
4
Press the R button to shoot the next clip.
To delete the clip you have shot or save it in a different My Clips, perform the
following on the con rmation screen.
F
My Clips will be played back, starting from the beginning.
G
Changes the My Clips in which to save the clip and the position at
which to add the new clip.
S
Deletes the shot clip without saving it.
Press the shutter button half-way down to add the next shot. The clip is saved in the
same My Clips as the previous clip.
Playback
You can play back the les in My Clips consecutively.
1
Press q and select an image marked c.
2
Press z and select [Play My Clips] using FG. Then press z again.
• The les in My Clips will play back consecutively.
• Press z to end the consecutive playback.
40
EN
Shooting
2
Editing “My Clips”
You can create a single movie le from My Clips.
The shot clips are stored in My Clips. You can add movie clips and still pictures to My
Clips (P. 70). You can also add screen transition effects and art lter effects.
1
Press q and then press G button repeatedly to play back My Clips.
z
Index display Calendar display
Single-frame playback
2016.04.01 12:30 20
100-0020
L
N
Wi-Fi
2016.04.01 12:30 21
2016.4
Sun Mon Tue Wed Thu Fri Sat
27 28 29 30 31 1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
1 2 3 4 5 6 7
27 28 29 30 31 1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
1 2 3 4 5 6 7
c 11:24 MOV FHD
c 12:12 MOV FHD
2016.04.01
c 11:23 MOV FHD
12:30
G
U
G
U
G
U
My Clips playback*
1
*
1
If one or more My Clips have been created, it will be displayed here (P. 39)
2
Select My Clips with FG, use HI to choose the clips you want to work
with, and then press z.
3
Select an item using FG and press the z button.
Play My Clips Plays back the les in My Clips in order, starting from the
beginning.
Play Movie When a movie le has been selected, you can control
playback in movie mode.
Rearrange Order Move les within My Clips or transfer les between separate
My Clips.
Preset Destination From the next time you shoot, movies shot in the same image
quality mode will be added to this c My Clips.
Delete My Clips Deletes all unprotected les from My Clips.
Erase Erase the selected le. You can also erase a le by selecting
it in Step 2 and pressing .
4
Display My Clips le from which you wish to create the movie. Select [Export
My Clips] and press z.
5
Select an item using FG and press the z button.
Clip Effects You can apply 6 types of art effects.
Transition Effect You can apply fade effects.
BGM Set [Happy Days] or [Off].
Recorded Clip Volume Set a volume for sounds recorded in the movie when BGM is
set to [Happy Days].
Recorded Clip Sound Set [On] to create a movie with the recorded sound. This
setting is only available when BGM is set to [Off].
Preview Preview the les of the set My Clips in order, starting from the
rst le.
41
EN
Shooting
2
6
When you have nished the editings, select [Begin Export] and press z.
The combined album is saved as a single movie.
Exporting a movie may take some time.
The maximum length for My Clips is 15 minutes and the maximum le size is 4 GB.
My Clips will be recorded in Full HD and Normal.
It may take a while for My Clips to display after taking out, inserting, erasing, or protecting
the card.
You can record a maximum of 99 My Clips and a maximum of 99 cuts per clip. The
maximum values may vary depending on the le size and length of My Clips.
You cannot add movies other than clips to My Clips.
You can also work with My Clips les directly using single-frame playback. In single-frame
playback, select a clip and press the z button, then select [See all My Clips] and press
z again. Proceed from Step 2.
BGM other than [Happy Days]
To use BGM other than [Happy Days], record data that you have downloaded from the
Olympus website onto the card and select it as [BGM] in Step 5. Visit the following website
for the download.
http://support.olympus-imaging.com/bgmdownload/
42
EN
Shooting
2
Self-portraits
Inverting the monitor allows you to take pictures of yourself while you preview the
frame.
1
Push the monitor down slightly and swing it downward.
2
1
1
If a power zoom lens is attached, the camera
automatically switches to wide angle.
The self portrait menu is displayed in the
monitor.
Different icons may be displayed depending on
the shooting mode.
45:67:8945:67:89
23412341
28
mm
C
Shutter Touch
When the icon is touched, the shutter is released
about 1 second later.
R
Movie
When you touch this icon, movie recording will start.
To stop recording, press the (Q) icon. While
recording a clip, touch (R) again to extend the
recording time (up to a maximum of 16 seconds).
A
One Touch
e-Portrait
Turning this on makes skin look smooth and
translucent.
D
One Touch
Custom Self Timer
Shoot 3 frames using the self timer. You can set
the number of times the shutter is released and the
interval between each release using Custom Self
Timer. This icon is not displayed when Custom Self-
timer is selected.g “Custom Self-timer” (P. 55).
E
Brightness
adjustment
(Exposure
compensation)
Touch [+] or [-] icon to adjust the brightness.
C
Clips
Touch this icon to switch to Clips mode. Touch again
to return to normal movie mode.
This icon is not displayed when the image quality
mode (P.57) is set to g (Clips).
2
Frame the shot.
Be careful that your ngers or the camera strap do not obstruct the lens.
43
EN
Shooting
2
3
Touch C and shoot.
The shot image will be displayed on the monitor.
You can also shoot by touching the subject displayed in the monitor, or by pressing
the shutter button.
You can shoot by operating the camera with a smartphone. g “Shooting remotely with
a smartphone” (P. 112)
When the AF mode in movie mode is set to C-AF, [Full-time AF] will be [On].
44
EN
Shooting
2
Using shooting options
Calling shooting options
You can call up especially often-used shooting options using pre-allocated buttons.
To select shooting options not assigned to buttons, use the live control. You can use
live control to select the shooting function while checking the effect on the screen in P,
A, S, M, n and J modes.
Live control is not displayed in A, ART and SCN modes at default settings. When
the [Live Control] in KControl Settings (P. 90) is set to On, you can use live control
even in A, ART and SCN modes.
Live control
WB
AUTO
WBWBWB
AUTOAUTOAUTO
AUTOAUTO
FHD
F
L
N
4:3
WB
AUTO
WBWBWB
AUTOAUTOAUTO
WB Auto
AUTOAUTO
S-IS AUTOS-IS AUTO
Settings
Functions
Live control screen
Available settings
Image stabilizer* ...................................P. 53
Picture mode* .......................................P. 61
Scene mode .........................................P. 24
Art lter mode .......................................P. 26
White balance* .....................................P. 52
Sequential shooting/Self-timer* ............P. 54
Aspect ratio...........................................P. 56
Record mode*.......................................P. 57
n mode* ..............................................P. 37
Flash mode ...........................................P. 58
Flash intensity control ...........................P. 60
Metering mode......................................P. 50
AF mode*..............................................P. 49
ISO sensitivity* .....................................P. 51
Face priority* ........................................P. 47
Movie sound record*.............................P. 62
* Available in n mode.
1
Press z to display the live control.
To hide the live control, press z again.
2
Use FG to select the settings,
use HI to change the selected
setting, and press z.
You can use the control dial (P) to
select a setting.
The selected settings take effect
automatically if no operations are
performed for about 8 seconds.
WB
AUTO
WBWBWB
AUTOAUTOAUTO
AUTOAUTO
L
N
4:3
WB
AUTO
WBWBWB
AUTOAUTOAUTO
P
WB Auto
AUTOAUTO
S-IS AUTOS-IS AUTO
FHD
F
Cursor
Displays
the selected
function
name
Cursor
P or HI
F
G
Some items are not available in some shooting modes.
45
EN
Shooting
2
Controlling exposure (exposure compensation)
After pressing the F button (F), use the control dial (P) or HI to adjust the
exposure compensation. Choose positive (“+”) values to make pictures brighter,
negative (“–”) values to make pictures darker. Exposure can be adjusted by ±5.0 EV.
Negative (–) No compensation (0) Positive (+)
Exposure compensation is not available in A, M, or SCN mode.
The monitor display can only be changed up to ±3.0EV. If the exposure exceeds ±3.0 EV,
the exposure bar will begin ashing.
Movies can be corrected in a range up to ±3.0 EV.
46
EN
Shooting
2
Setting the AF target (AF Area)
Choose which of the 81 autofocus targets will be used for autofocus.
1
Press the P button (H) to display the AF target.
2
Use FGHI to change to single target display and select the AF position.
“All targets” mode is restored if you move the cursor off the screen.
All Targets
Single Target
All Targets
The camera automatically
chooses from the full set of
focus targets.
Select the focus target
manually.
When using a Four Thirds system lens, the camera automatically switches to single target
mode.
The size and number of the AF target changes depending on the [Digital Tele-converter],
[Image Aspect], and group target settings.
Using small target and group target (Setting AF target)
You can change the target selection method and target size. You can also select Face
priority AF (P. 47 ).
1
Press the P button (H) to display the AF target.
2
Press the INFO button during AF target selection and choose a selection
method using FG.
INFO
ii
o
FG
ii
o
(All Targets)
The camera selects automatically from among all the AF
targets.
I
(Single Target)
You select a single AF target.
K
(Small Target)
The AF target can be reduced in size.
J
(Group Target)
The camera automatically chooses from the targets in the
selected group.
When shooting movies, the camera automatically switches to single target mode.
When using a Four Thirds system lens, the camera automatically switches to single target
mode.
47
EN
Shooting
2
Face priority AF/pupil detection AF
The camera detects faces and adjusts focus and digital ESP.
1
Press the P button (H) to display the AF target.
2
Press the INFO button.
You can change the AF target selection method.
3
Use HI to select an option and press z.
ii
o
Selection method
N
Face Priority Off Face priority off.
I
Face Priority On Face priority on.
K
Face & Eye Priority On
The autofocus system selects the pupil of the eye
closest to the camera for face-priority AF.
L
Face & R. Eye Priority On
The autofocus system selects the pupil of the eye on
the right for face-priority AF.
M
Face & L. Eye Priority On
The autofocus system selects the pupil of the eye on
the left for face-priority AF.
4
Point the camera at your subject.
If a face is detected, it will be indicated by a white
border.
5
Press the shutter button halfway to focus.
When the camera focuses on the face in the white
border, the border will turn green.
If the camera is able to detect the subject’s eyes, it will
display a green frame over the selected eye.
(pupil detection AF)
6
Press the shutter button the rest of the way down to
shoot.
01:02:0301:02:03
10231023
250250 F5.6
P
0.00.0
L
N
S-IS AUTO
S-IS AUTO
ISO-A
200
Wi-Fi
FHD
F
01:02:0301:02:03
10231023
250250 F5.6
P
0.00.0
L
N
S-IS AUTO
S-IS AUTO
ISO-A
200
Wi-Fi
FHD
F
Face priority applies only to the rst shot in each sequence taken during sequential
shooting.
Pupil detection is not available in [C-AF].
Depending on the subject and the art lter setting, the camera may not be able to correctly
detect the face.
When set to [p (Digital ESP metering)], metering is performed with priority given to
faces.
Face priority is also available in [MF]. Faces detected by the camera are indicated by
white frames.
48
EN
Shooting
2
Zoom frame AF/zoom AF (Super Spot AF)
You can zoom in on a portion of the frame when adjusting focus. Choosing a high
zoom ratio allows you to use autofocus to focus on a smaller area than is normally
covered by the AF target. You can also position the focus target more precisely.
01:02:0301:02:03
3030
250250 F5.6
0.00.0
L
N
S-IS AUTO
S-IS AUTO
ISO-A
200
Wi-Fi
FHD
F
Shooting display
01:02:0301:02:03
3030
250250 F5.6
0.0
0.0
L
N
S-IS AUTO
S-IS AUTO
ISO-A
200
Off
Wi-Fi
FHD
F
Zoom frame AF Zoom AF
U
U
U
U
U
U
U (Press and hold) / z
1
Press and release the U button to display the zoom frame.
If the camera was focused using autofocus just before the button was pressed, the
zoom frame will be displayed at the current focus position.
• Use FGHI to position the zoom frame.
• Press the INFO button and use FG to choose the zoom ratio. (×5, ×7, ×10, ×14)
2
Press and release the U button again to zoom in on the zoom frame.
• Use FGHI to position the zoom frame.
You can change the zoom ratio by rotating the control dial (P).
3
Press the shutter button halfway to initiate autofocus.
The camera will focus using the subject in the frame at the center of the screen. To
change the focus position, move it by touching the screen.
You can also display and move the zoom frame using touch screen operations.
Zoom is visible only in the monitor and has no effect on the resulting photographs.
When you are using a Four Thirds system lens, the AF will not operate with during zoom
display.
While zoomed in, a sound is made by the IS (Image Stabilizer).
49
EN
Shooting
2
Choosing a focus mode (AF mode)
Select a focusing method (focus mode).
You can choose separate focusing methods for still photography mode and
n
mode.
1
Press the z button to display the live control, and select the AF mode item
using FG.
P
Single AF
ii
ISO
AUTO
ISOISOISO
AUTOAUTOAUTO
RR
AUTOAUTOAUTOAUTO
S-AFS-AF
C-AFC-AF
MFMF
S-AFS-AF
MF
C-AFC-AF
TR
S-AFS-AF
S-AFS-AF
AF mode
2
Select an option with HI and press the z button.
The selected AF mode is displayed on the monitor.
S-AF (single AF)
The camera focuses once when the shutter button is pressed
halfway. When the focus is locked, a beep sounds, and the AF
con rmation mark and the AF target mark light up. This mode is
suitable for taking pictures of still subjects or subjects with limited
movement.
C-AF
(continuous AF)
The camera repeats focusing while the shutter button remains
pressed halfway. When the subject is in focus, the AF con rmation
mark lights up on the monitor and the beep sounds when the focus
is locked at the rst time.
Even if the subject moves or you change the composition of the
picture, the camera continues trying to focus.
When using a Four Thirds system lens, this setting will change to
[S-AF].
MF
(manual focus)
This function allows you to
manually focus on any position
by operating the focus ring on
the lens.
Near
)
Focus ring
S-AF+MF
(simultaneous use of
S-AF mode and MF
mode)
After pressing the shutter button halfway to focus in [S-AF] mode,
you can turn the focus ring to ne-adjust focus manually.
C-AF+TR
(AF tracking)
Press the shutter button halfway to focus; the camera then tracks
and maintains focus on the current subject while the shutter button
is held in this position.
The AF target is displayed in red if the camera can no longer track
the subject. Release the shutter button and then frame the subject
again and press the shutter button halfway.
When using a Four Thirds system lens, this setting will change to
[S-AF].
The camera may be unable to focus if the subject is poorly lit, obscured by mist or smoke,
or lacks contrast.
When using a Four Thirds system lens, AF will not be available during movie recording.
You cannot set the AF mode if the MF focus latch of the lens is set to MF.
50
EN
Shooting
2
Changing the brightness of highlights and shadows
Press the F button (F) and press the INFO button to
display the Highlight & Shadow Control menu. Use HI to
choose a tone level. Choose “low” to darken shadows or
“high” to brighten highlights.
ISO
200
L
N
P
01:02:0301:02:03
12341234
HD
250250 F5.6
+
2.0
+
2.0
00
S-ISS-IS
Exposure
compensation
Low tone High tone
INFOINFO INFO
00
00
Choosing how the camera measures brightness (metering)
Choose how the camera meters subject brightness.
1
Press the z button to display
the live control, and select the
metering item using FG.
P
ESP
HIHI SHSH
ii
ISO
AUTO
ISOISOISO
AUTOAUTOAUTO
RR
S-AFS-AF
AUTOAUTOAUTOAUTO
Metering
2
Select an option with HI and press the z button.
p
Digital ESP
metering
The camera meters exposure in 324 areas of the frame and
optimizes exposure for the current scene or (if an option other
than [OFF] is selected for [I Face Priority]) portrait subject.
This mode is recommended for general use.
H
Center weighted
averaging
metering
This metering mode provides the average
metering between the subject and the
background lighting, placing more weight on
the subject at the center.
I
Spot metering
Choose this option to meter a small area
(about 2% of the frame) with the camera
pointed at the object you wish to meter.
Exposure will be adjusted according to the
brightness at the metered point.
IHI
Spot metering -
highlight
Increases spot metering exposure. Ensures bright subjects
appear bright.
ISH
Spot metering -
shadow
Lowers spot metering exposure. Ensures dark subjects appear
dark.
3
Press the shutter button halfway.
Normally, the camera will start metering when the shutter button is pressed halfway
and lock exposure while the shutter button is held in this position.
51
EN
Shooting
2
ISO sensitivity
Increasing ISO sensitivity increases noise (graininess) but allows photographs to be
taken when lighting is poor. The setting recommended in most situations is [AUTO],
which starts at ISO 200 — a value that balances noise and dynamic range — and then
adjusts ISO sensitivity according to shooting conditions.
1
Press the z button to display
the live control, and select the ISO
sensitivity item using FG.
AUTOAUTO
P
ii
ISO
AUTO
ISOISOISO
AUTOAUTOAUTO
RR
AUTOAUTOAUTOAUTO
ISO-A
200
ISO-AISO-AISO-A
200200200
250 F5.6 0.0
AUTOAUTO LOWLOW
200200
250250 320320 400400 500500
Recommended
S-AFS-AF
ISO
sensitivity
2
Select an option with HI and press the z button.
AUTO
The sensitivity is set automatically according to the shooting
conditions.
LOW, 200 – 25600 Sensitivity is set to the selected value.
52
EN
Shooting
2
Adjusting color (white balance)
White balance (WB) ensures that white objects in images recorded by the camera
appear white. [AUTO] is suitable in most circumstances, but other values can be
selected according to the light source when [AUTO] fails to produce the desired results
or you wish to introduce a deliberate color cast into your images.
1
Press the z button to display the live control, and select the white balance
item using FG.
WB
AUTO
WBWBWB
AUTOAUTOAUTO
AUTOAUTO
L
N
4:3
WB
AUTO
WBWBWB
AUTOAUTOAUTO
P
WB Auto
AUTOAUTO
S-IS AUTOS-IS AUTO
FHD
F
White
balance
2
Select an option with HI and press the z button.
WB mode
Color
temperature
Light conditions
Auto white
balance
AUTO
k
Used for most light conditions (when there is a
white portion framed on the monitor). Use this
mode for general use.
Preset white
balance
5
5300K
For shooting outdoors on a clear day, or to
capture the reds in a sunset or the colors in a
reworks display
N
7500K
For shooting outdoors in the shadows on a clear
day
O
6000K For shooting outdoors on a cloudy day
1
3000K For shooting under a tungsten light
>
4000K For subjects lit by uorescent lights
U
k
For underwater photography
n
5500K For ash shooting
One-touch
white balance
(P. 53 )
P/Q/
W/X
Color
temperature
set by one-
touch WB
Choose when a white or gray subject can be
used to measure white balance and the subject
is under mixed lighting or lit by an unknown type
of ash or other light source.
Custom white
balance
CWB
2000K –
14000K
After pressing the INFO button, use HI
buttons to select a color temperature and then
press z.
53
EN
Shooting
2
One-touch white balance
Measure white balance by framing a piece of paper or other white object under the lighting
that will be used in the nal photograph. This is useful when shooting a subject under natural
light, as well as under various light sources with different color temperatures.
1
Select [P], [Q], [W] or [X] (one-touch white balance 1, 2, 3 or 4) and
press the INFO button.
2
Photograph a piece of colorless (white or gray) paper.
Frame the object so that it lls the display and no shadows fall it.
The one-touch white balance screen appears.
3
Select [Yes] and press z.
The new value is saved as a preset white balance option.
The new value is stored until one-touch white balance is measured again. Turning the
power off does not erase the data.
% Tips
If the subject is too bright or too dark or visibly tinted, the message [WB NG Retry] will be
displayed and no value will be recorded. Correct the problem and repeat the process from
Step 1.
Reducing camera shake (image stabilizer)
You can reduce the amount of camera shake that can occur when shooting in low light
situations or shooting with high magni cation. The image stabilizer starts when you
press the shutter button halfway.
1
Press the z button to display the live control, and select the image
stabilizer item using FG.
WB
AUTO
WBWBWB
AUTOAUTOAUTO
L
N
4:3
j
WB
AUTO
WBWBWB
AUTOAUTOAUTO
mmmm5050
S-ISS-IS S-ISS-IS
OFFOFF
S-IS AUTOS-IS AUTO
S-IS AUTO
S-IS AUTO
S-ISS-IS
FHD
F
P
Focal Length
Auto I.S.
Image stabilizer
2
Select an option with HI and press the z button.
Still
picture
OFF Still-I.S. Off Image stabilizer is off.
S-IS1
All Direction
Shake I.S.
Image stabilizer is on.
S-IS2
Vertical Shake
I.S.
Image stabilization applies only to vertical
(Y) camera shake.
S-IS3
Horizontal
Shake I.S.
Image stabilization applies only to horizontal
(Z) camera shake. Use when panning the
camera horizontally with the camera held in
portrait orientation.
S-IS AUTO Auto I.S.
The camera detects the panning direction and
applies the appropriate image stabilization.
Movie
OFF Movie-I.S. Off Image stabilizer is off.
ON Movie-I.S. On
In addition to applying image stabilization in
all directions, the camera compensates for the
camera shake that occurs when you walk.
54
EN
Shooting
2
Choosing a focal length (Micro Four Thirds/Four Thirds System lenses excluded)
Use focal length information to reduce camera shake when shooting with lenses that are not
Micro Four Thirds or Four Thirds system lenses.
Select [Image Stabilizer], press the INFO button, use HI to select a focal length, and
press z.
Choose a focal length between 8 mm and 1000 mm.
Choose the value that most closely matches to the one that is printed on the lens.
The image stabilizer cannot correct excessive camera shake or camera shake that occurs
when the shutter speed is set to the slowest speed. In these cases, it is recommended
that you use a tripod.
When using a tripod, set [Image Stabilizer] to [OFF].
When using a lens with an image stabilization function switch, priority is given to the lens
side setting.
When priority is being given to the lens side image stabilization and the camera side is set
to [S-IS AUTO], [S-IS1] is used instead of [S-IS AUTO].
You may notice an operating sound or vibration when the image stabilizer is activated.
When using a lens with the image stabilization switch
Set the image stabilizer of the camera and the image stabilization switch of the lens. When
you do not use the image stabilizer, set both of the functions on the camera and the lens to
off.
Sequential shooting/using the self timer
Keep the shutter button pressed all the way down to take a series of photos.
Alternatively, you can take pictures using the self timer.
1
Press the jY button (G) to display the sequential shooting/self timer
control.
You can also set by pressing the z button to display the live control, and selecting
j/Y (sequential shooting/self timer) item using FG.
You can also set from [j/Y] in X Shooting Menu 2.
P
oo
TT
S
S
Y
12s
Y
12s
Y
2s
Y
2s
Y
c
Y
c
Single
P
Single
WB
AUTO
WBWBWB
AUTOAUTOAUTO
FHD
F
L
N
4:3
S-IS AUTOS-IS AUTO
oo
TT
S
S
Y
12s
Y
12s
Y
2s
Y
2s
Y
c
Y
c
j/Y
2
Select an option with HI and press the z button.
o
Single-frame
shooting
Shoots 1 frame at a time when the shutter button is pressed
(normal shooting mode, single-frame shooting).
T
Sequential H
Photographs are taken at about 7.1 frames per second (fps) while
the shutter button is pressed all the way down. Focus, exposure,
and white balance are xed at the values for the rst shot in each
series.
S
Sequential L
Photographs are taken at about 3.7 frames per second (fps)
while the shutter button is pressed all the way down. Focus and
exposure are xed according to the options selected for [AF
Mode] (P. 49 ) and [AEL/AFL] (P. 97 ).
55
EN
Shooting
2
Y12s
Self-timer
12 SEC
Press the shutter button halfway to focus, the rest of the way
down to start the timer. First, the self-timer lamp lights up for
approximately 10 seconds, then it blinks for approximately
2 seconds and the picture is taken.
Y2s
Self-timer
2 SEC
Press the shutter button halfway to focus, the rest of the
way down to start the timer. The self-timer lamp blinks for
approximately 2 seconds, and then the picture is taken.
YC
Custom Self-
timer
Press the INFO button to set [Y Timer], [Number of Frames],
[Interval Length], and [Every Frame AF].
Select a setting using HI, and adjust the setting by using the
control dial (
P
).
If [Every Frame AF] is set to [On], each frame is automatically
focused before shooting.
To cancel the activated self-timer, press G.
When you are using S, no con rmation image is displayed during shooting. The
image is displayed again after shooting ends. When you are using T, the image shot
immediately before is displayed.
The speed of sequential shooting varies depending on the lens you are using and the
focus of the zoom lens.
During sequential shooting, if the battery check blinks due to low battery, the camera
stops shooting and starts saving the pictures you have taken on the card. The camera
may not save all of the pictures depending on how much battery power remains.
Fix the camera securely on a tripod for self-timer shooting.
If you stand in front of the camera to press the shutter button when using the self-timer,
the photograph may be out of focus.
56
EN
Shooting
2
Setting the image aspect
You can change the aspect ratio (horizontal-to-vertical ratio) when taking pictures.
Depending on your preference, you can set the aspect ratio to [4:3] (standard), [16:9],
[3:2], [1:1], or [3:4].
1
Press the z button to display the live control, and select the aspect ratio
item using FG.
2
Select an aspect ratio option with HI and press the z button.
JPEG images are cropped to the selected aspect ratio; RAW images, however, are not
cropped but are instead saved with information on the selected aspect ratio.
When RAW images are played back, the selected aspect ratio is shown by a frame.
Selecting image quality (still image quality mode)
You can set an image quality mode for still images. Select a quality suitable for the
application (such as for processing on PC, use on website etc.).
1
Press z to display the live control, and select the image quality mode item
for still images using FG.
L
F
4:3
P
WB
AUTO
WBWBWB
AUTOAUTOAUTO
S-IS AUTOS-IS AUTO
RAWRAW
L M
N
S
N
3838
L
F+
RAW
F+F+F+
RAWRAWRAW
NN
N
FHD
F
4608x3456
Still image quality mode
2
Select an option with HI and press the z button.
Choose from JPEG (YF, YN, XN, and WN) and RAW modes. Choose a JPEG+RAW
option to record both a JPEG and a RAW image with each shot. JPEG modes combine
image size (Y, X, and W) and compression ratio (SF, F, N, and B).
When you want to select a combination other than YF/YN/XN/WN, change the
[K Set] (P. 93 ) settings in Custom Menu.
RAW image data
This format (extension “.ORF”) stores unprocessed image data for later processing. RAW
image data cannot be viewed using other cameras or software, and RAW images cannot
be selected for printing. JPEG copies of RAW images can be created using this camera.
g “Editing still images” (P. 84)
57
EN
Shooting
2
Selecting image quality (movie image quality mode)
Set a movie image quality mode suitable for the desired use.
1
Set the mode dial to n.
2
Press the z button to display the live control, and select the movie image
quality mode item using FG.
PP
WB
AUTO
WBWBWB
AUTOAUTOAUTO
n
PP
S-AFS-AF
j
M-IS ON M-IS ON
FHD
F
FHD
N
HD
F
01:01:0701:01:07
FHD
FHD
F
Movie image
quality mode
3
Select an option with HI.
To change the shooting time of clips, press the INFO button and change settings
using the control dial (P).
Record mode Application
Settings you can
change
FHD
(Full HD Normal)*
1
Switches to clips shooting
(P. 39).
Shooting time
FHD
F
(Full HD Fine)*
1
Display on TVs and other
devices
FHD
N
(Full HD Normal)*
1
HD
F
(HD Fine)*
1
HD
N
(HD Normal)*
1
H (1280×720, Motion JPEG)*
2
For computer playback or
editing
I (640×480, Motion JPEG)*
2
*1 File format: MPEG-4 AVC/H.264. Files may be up to 4 GB in size. Individual movies may
be up to 29 minutes in length.
*2 Files may be up to 2GB in size.
Depending on the type of card used, recording may end before the maximum length is reached.
4
Press the z button to save changes.
58
EN
Shooting
2
Using a ash ( ash photography)
The ash can be set manually as required. The ash can be used for ash
photography in a variety of shooting conditions.
1
Remove the connector cover from the ash unit and attach the ash to
the camera.
• Slide the ash unit all the way in, stopping when it contacts the back of the shoe and
is securely in place.
2
1
UNLOCK switchHot shoe cover
Connector cover
Removing the ash unit
Press the UNLOCK switch while removing the ash unit.
2
1
UNLOCK switch
2
Raise the ash head.
• Lower the ash head when the ash is not in use.
3
Press the # button (I) to display the ash mode control.
You can also set by pressing the z button to display the live control, and selecting
ash mode item using FG.
AUTOAUTO
P
AUTOAUTO
Flash Auto
WB
AUTO
WBWBWB
AUTOAUTOAUTO
AUTOAUTO
P
Flash Auto
AUTOAUTO
ISO
AUTO
ISOISOISO
AUTOAUTOAUTO
RR
S-AFS-AF
ii
Flash mode
59
EN
Shooting
2
4
Select an option with HI and press the z button.
The options available and the order in which they are displayed vary depending on
the shooting mode. g “Flash modes that can be set by shooting mode” (P. 59)
AUTO Auto ash
The ash res automatically in low light or
backlight conditions.
#
Fill-in ash The ash res regardless of the light conditions.
$
Flash off The ash does not re.
!/
#!
Red-eye reduction ash
This function allows you to reduce the red-eye
phenomenon. In S and M modes, the ash
always res.
#SLOW
Slow synchronization
(1st curtain)
Slow shutter speeds are used to brighten dimly-lit
backgrounds.
!SLOW
Slow synchronization
(1st curtain)/Red-eye
reduction ash
Combines slow synchronization with red-eye
reduction.
#SLOW2/
2nd
Curtain
Slow synchronization
(2nd curtain)
The ash res just before the
shutter closes to create trails
of light behind moving light
sources.
#FULL,
#1/4 etc.
Manual
For users who prefer manual operation. If you
press the INFO button, you can use the dial to
adjust the ash level.
• In [!/#!(Red-eye reduction ash)], after the pre- ashes, it takes about 1 second
before the shutter is released. Do not move the camera until shooting is complete.
• [!/#!(Red-eye reduction ash)] may not work effectively under some shooting
conditions.
• When the ash res, the shutter speed is set to 1/250 sec. or slower. When shooting
a subject against a bright background with the ll-in ash, the background may be
overexposed.
Flash modes that can be set by shooting mode
Shooting
mode
LV super
control
panel
Flash mode
Flash
timing
Conditions for
ring the ash
Shutter
speed
limit
P/A
#AUTO
Auto ash
1st
curtain
Fires automatically
in dark/backlit
conditions
1/30 sec. –
1/250 sec.*
!
Auto ash
(red-eye reduction)
#
Fill-in ash Always res
30 sec. –
1/250 sec.*
$
Flash off
kk k
!
SLOW
Slow synchronization
(red-eye reduction)
1st
curtain
Fires automatically
in dark/backlit
conditions
60 sec. –
1/250 sec.*
#SLOW
Slow synchronization
(1st curtain)
#
SLOW2
Slow synchronization
(2nd curtain)
2nd
curtain
60
EN
Shooting
2
Shooting
mode
LV super
control
panel
Flash mode
Flash
timing
Conditions for
ring the ash
Shutter
speed
limit
S/M
#
Fill-in ash
1st
curtain
Always res
60 sec. –
1/250 sec.*
#!
Fill-in ash
(red-eye reduction)
$
Flash off
kk k
#
2nd-C
Fill-in ash/Slow
synchronization
(2nd curtain)
2nd
curtain
Always res
60 sec. –
1/250 sec.*
#AUTO, $ can be set in A mode.
* 1/200 seconds when using a separately sold external ash.
Minimum range
The lens may cast shadows over objects close to
the camera, causing vignetting, or be too bright
even at minimum output.
Lens
Approximate distance at
which vignetting occurs
17mm f1.8 0.25 m
25mm f1.8 0.25m
45mm f1.8 0.5m
14 – 42mm IIR 0.55m
14 – 42mm EZ 0.25m
40 – 150mm 0.9m
• External ash units can be used to prevent vignetting. To prevent photographs from being
overexposed, select mode A or M and choose a high f-number, or reduce ISO sensitivity.
Adjusting ash output ( ash intensity control)
Flash output can be adjusted if you nd that your subject to appears overexposed, or is
underexposed even though the exposure in the rest of the frame is just right.
1
Press the z button to display the live
control, and select the ash intensity
control item using FG.
WB
AUTO
WBWBWB
AUTOAUTOAUTO
P
00
ii
ISO
AUTO
ISOISOISO
AUTOAUTOAUTO
RR
S-AFS-AF
AUTOAUTOAUTOAUTO
0.0
Flash
intensity
control
2
Select a ash compensation value with HI and press the z button.
This setting has no effect when the ash control mode for the external ash unit is set to
MANUAL.
• Changes to ash intensity made with the external ash unit are added to those made with
the camera.
61
EN
Shooting
2
Processing options (picture mode)
Select a picture mode and make individual adjustments to contrast, sharpness, and
other parameters (P. 75). Changes to each picture mode are stored separately.
1
Press the z button to display the live control, and select the picture mode
item using FG.
P
Natural
WB
AUTO
WBWBWB
AUTOAUTOAUTO
FHD
F
L
N
4:3
M C
jj
i
h
jj
j
44
j
55
S-IS AUTOS-IS AUTO
Picture
mode
2
Select an item using HI and press the z button.
h
i-Enhance Produces more impressive-looking results suited to the scene.
i
Vivid Produces vivid colors.
j
Natural Produces natural colors.
Z
Muted Produces at tones.
a
Portrait Produces beautiful skin tones.
J
Monochrome Produces black and white tone.
K
Custom
Select one picture mode, set the parameters, and register the
setting.
v
e-Portrait
Produces smooth skin textures. Cannot be used with bracket
photography or when shooting movies.
x
Underwater Produces colors suited to the underwater scene.
j
Pop Art
Choose an art lter and select the desired effect.
g “Types of art lters” (P. 26 )
k
Soft Focus
l
Pale&Light Color
m
Light Tone
n
Grainy Film
o
Pin Hole
s
Diorama
t
Cross Process
u
Gentle Sepia
v
Dramatic Tone
Y
Key Line
Z
Watercolor
G
Vintage
H
Partial Color*
* After choosing Partial Color using HI, press the INFO button to display the color ring.
62
EN
Shooting
2
Movie sound options (recording sound with movies)
You can set the recording sound when shooting movies.
1
Rotate the mode dial to n, press
the z button to display the live
control, and select the movie
sound item using FG.
ONON
RR
n
OFFOFF
ONON
ii
ISO
AUTO
ISOISOISO
AUTOAUTOAUTO
RR
Movie
R
On
Movie sound
2
Switch ON/OFF using HI and press the z button.
When recording sound in a movie, the sound made by the lens and camera operating
may be recorded. If desired, you can reduce these sounds by shooting with [AF Mode] set
to [S-AF], or by limiting the amount of times you press the buttons.
No sound is recorded in s (Diorama) mode.
When recording sound with movies is set to [OFF], O is displayed.
Adding effects to a movie
You can create movies that take advantage of the effects available in still photography
mode. Set the mode dial to
n
to enable the settings.
1
Set the mode dial to n, press the z button to
display the live control, and select the shooting
mode item using FG.
PP
P
P
WB
AUTO
WBWBWB
AUTOAUTOAUTO
n
PP
AA SS MM
FHD
F
PP
S-AFS-AF
j
M-IS ONM-IS ON
Program Auto
Shooting mode
2
Use HI to choose a shooting mode and press the z button.
P
Optimal aperture is set automatically according to the brightness of the subject. You
can adjust the exposure by using the control dial (P).
After pressing the F button, you can also set it by using HI.
A
Depiction of background is changed by setting the aperture. You can set the
aperture by using the control dial (P).
After pressing the F button, you can also set it by using FG.
After pressing the F button, you can adjust the exposure by using HI.
S
Shutter speed affects how the subject appears. You can set the shutter speed by
using the control dial (P).
After pressing the F button, you can also set it by using FG.
After pressing the F button, you can adjust the exposure by using HI.
The shutter speed can be set to values between 1/30 s and 1/4000 s.
M
You control both aperture and shutter speed. You can set the shutter speed by using
the control dial (P). After pressing the F button, you can also set it by using FG.
After pressing the F button, you can set the aperture by using the control dial (P)
or HI.
The shutter speed can be set to values between 1/30 s and 1/4000 s.
The sensitivity can only be set manually to values between ISO 200 and 3200.
63
EN
Shooting
2
Stabilization is not possible when the camera shake is excessive.
When the inside of the camera becomes hot, shooting is automatically stopped to protect
the camera.
With some art lters, [C-AF] operation is limited.
64
EN
Playback
3
3
Information display during playback
Playback image information
Simpli ed display
2016.04.01 12:30 15
100-0015
×10×10
4
:
3
L
N
3D3D
Wi-Fi
f
0
a
4157 89
cde
2 3 6
b
Overall display
F5.6F5.6
+1.0+1.0
G+4G+4A+4A+4
AdobeAdobe
NaturalNatural
ISO 400ISO 400
250250
+2.0+2.0 45mm45mm
1/84608×3456
×10×10
4
:
3
L
N
3D3D
2016.04.01 12:30 15
100-0015
WB
AUTO
P
Wi-Fi
SD
o
l
m
n
p
r
q
k
j
stuw
hg i
v
Playback
65
EN
Playback
3
1 Battery check ..................................P. 16
2 Wireless LAN connection..... P. 110 115
3 Including GPS information ............P. 113
4 Eye-Fi upload complete ..................P. 96
5 Print reservation
Number of prints ...........................P. 121
6 Share order .....................................P. 70
7 Sound record ..................................P. 70
8 Protect ............................................P. 69
9 Image selected ...............................P. 70
0 File number .....................................P. 94
a Frame number
b Storage device
c Record mode ..................................P. 76
d Aspect ratio .....................................P. 56
e 3D image ........................................P. 24
L Temporarily saved image for PHOTO
STORY............................................P. 29
m
p
HDR image
.......................P. 80
f Date and time .................................P. 17
g Aspect border .................................P. 56
h AF target .........................................P. 46
i Shooting mode.........................P. 20 – 37
j Exposure compensation .................P. 45
k Shutter speed ..........................P. 30 33
l Aperture value .........................P. 30 33
m Focal length
n Flash compensation value ..............P. 60
o White balance compensation
p Color space.....................................P. 93
q Picture mode...................................P. 61
r Compression rate .........................P. 106
s Pixel count ......................................P. 93
t ISO sensitivity .................................P. 51
u White balance .................................P. 52
v Metering mode ................................P. 50
w Histogram .......................................P. 19
Switching the information display
You can switch the information displayed during playback by pressing the INFO
button.
INFO button
2016.04.01 12:30 15
100-0015
4
:
3
L
N
×10×10
F5.6F5.6
±0.0±0.0
G±10G±10A±10A±10
AdobeAdobe
NaturalNatural
ISO 400ISO 400
250250
+2.0+2.0 45mm45mm
1/84032×3024
×10×10
4
:
3
L
N
2016.04.01 12:30 15
100-0015
WB
AUTO
P
INFO
INFO
INFO
Overall display*
Simpli ed display
Image only
* Not displayed during movie frame playback.
66
EN
Playback
3
Viewing photographs and movies
1
Press the q button.
Your most recent photograph or movie will be displayed.
Select the desired photograph or movie using the control dial (P) or arrow pad.
Press the shutter button halfway to return to shooting mode.
Control dial
Displays the
previous
frame
Displays the
next frame
q button
2016.04.01 12:30 20
100-0020
L
N
Wi-Fi
2016.04.01 12:30 4
100-0004
WB
AUTO
WBWBWB
AUTOAUTOAUTO
P
HD
Wi-Fi
Still image
Movie
Control dial (P)
Single-frame playback: Previous (t)/Next (s)
Close-up playback: You can display the next frame or the
previous frame during close-up playback.
Index/My Clips/calendar playback: Highlight image
Arrow pad
(FGHI)
Single-frame playback: Next (I)/previous (H)/playback volume
(FG)
Close-up playback: Scroll image
You can display the next frame (I) or the
previous frame (H) during close-up playback
by pressing the INFO button.
Index/My Clips/calendar playback: Highlight image
U
Close-up playback
G
Index display
INFO View image info
H
Select picture (P. 70)
Delete picture (P. 69)
z
View menus (in calendar playback, press this button to exit to
single-frame playback)
67
EN
Playback
3
Index display/Calendar display
From single-frame playback, press the G button for index playback. Press the G button
further for My Clips playback and further still for calendar playback.
• Press the z button to return to single-frame playback.
z
Index display Calendar display
Single-frame playback
2016.04.01 12:30 20
100-0020
L
N
Wi-Fi
2016.04.01 12:30 21
2016.4
Sun Mon Tue Wed Thu Fri Sat
27 28 29 30 31 1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
1 2 3 4 5 6 7
27 28 29 30 31 1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
1 2 3 4 5 6 7
c 11:24 MOV FHD
c 12:12 MOV FHD
2016.04.01
c 11:23 MOV FHD
12:30
G
U
G
U
G
U
My Clips playback*
1
*
1
If one or more My Clips have been created, it will be displayed here (P. 39).
Viewing still images
Close-up playback
In single-frame playback, press the U button to zoom in. Press the G button to return to
single-frame playback.
2× zoom
close-up playback
Single-frame
playback
14× zoom
2x
G
G
U
U
2016.04.01 12:30 20
100-0020
L
N
Wi-Fi
14x
z
Rotate
Choose whether to rotate photographs.
1
Play the photograph back and press z.
2
Select [Rotate] and press z.
3
Press F to rotate the image counterclockwise, G to rotate it clockwise; the
image rotates each time the button is pressed.
• Press z to save settings and exit.
The rotated image is saved in its current orientation.
Movies, 3D photos, and protected images cannot be rotated.
68
EN
Playback
3
Slideshow
This function displays images stored on the card one after another.
1
Press z during playback and select [m].
JPEG
m
Erase
Back Set
Print Order
2
Adjust settings.
Start Start the slideshow. Images are displayed in order, starting with the
current picture.
BGM Set [Happy Days] or turn BGM [Off]. Other BGM can be selected
once it has been downloaded from the Olympus website.
http://support.olympus-imaging.com/bgmdownload/
Slide Set type of slideshow to execute.
Slide Interval Choose the length of time each slide is displayed from 2 to 10
seconds.
Movie Interval Select [Full] to include full-length movie clips in the slideshow,
[Short] to include only the opening portion of each clip.
3
Select [Start] and press z.
The slideshow will start.
• Press z to stop the slideshow.
Volume
Press FG during the slideshow to adjust the overall volume of the camera speaker.
Press HI while the volume adjustment indicator is displayed to adjust the balance
between the sound recorded with the image or movie and background music.
Volume
Volume can be adjusted by pressing F or G during single-
frame and movie playback.
00:00:02/00:00:14
69
EN
Playback
3
Watching movies
Select a movie and press the z button to display the
playback menu. Select [Play Movie] and press the z
button to begin playback. Fast-forward and rewind using
H/I.
Press the z button again to pause playback. While
playback is paused, use F to view the rst frame and G
to view the last frame. Use HI or the control dial (P) to
view earlier and later frames. Press the MENU button to
end playback.
m
Movie
Back
Play Movie
Erase
Set
Share Order
We recommend using the supplied PC software to play movies on a computer. Before
launching the software for the rst time, connect the camera to the computer.
Protecting images
Protect images from accidental deletion. Display an image
you wish to protect and press z to display the playback
menu. Select [0] and press z, and then press F or G
to protect the image. Protected images are shown by a 0
(protect) icon. Press F or G to remove protection.
You can also protect multiple selected images.
g “Selecting images ([0], [Erase Selected], [Share
Order Selected])” (P. 70)
2016.04.01 12:30 20
100-0020
L
N
4
:
3
Wi-Fi
0 (protect) icon
Formatting the card erases all images even if they have been protected.
Erasing images
Display an image you want to delete and press the button. Select [Yes] and press
the z button.
You can erase images without the con rmation step by changing the button settings.
g [Quick Erase] (P. 94 )
button
Erase
Back
Yes
No
Set
70
EN
Playback
3
Setting a transfer order on images (Share Order)
You can select images you want to transfer to a smartphone in advance. You can also
browse just the images included in the share order. When playing back images you
want to transfer, press z to display the playback menu. After selecting [Share Order]
and pressing z, press F or G to set a share order on an image and display h. To
cancel a share order, press F or G.
You can select images you want to transfer in advance and set a share order all at
once. g “Selecting images ([0], [Erase Selected], [Share Order Selected])” (P. 70) ,
“Transferring images to a smartphone” (P. 112)
You can set a share order on 200 frames.
Share orders cannot include RAW images or Motion JPEG (H or I) movies.
Selecting images ([0], [Erase Selected], [Share Order Selected])
You can select multiple images for [0], [Erase Selected]
or [Share Order Selected].
Press the H button in the index display screen (P. 67 ) to
select an image; a v icon will appear on the image. Press
the H button again to cancel the selection.
Press z to display the menu, and then select from, [0],
[Erase Selected], or [Share Order Selected].
This function is also available in single-frame playback.
2016.04.01 12:30 21
Audio recording
Add an audio recording (up to 30 sec. long) to the current photograph.
1
Display the image to which you want to add an
audio recording and press z.
Audio recording is not available with protected images.
Audio recording is also available in the playback menu.
2
Select [R] and press z.
To exit without adding a recording, select [No].
JPEG
Rotate
R
JPEG Edit
Back Set
Share Order
Add to My Clips
3
Select [R Start] and press z to begin recording.
To stop recording part-way through, press z.
4
Press z to end recording.
Images with audio recordings are indicated by a H icon.
To delete a recording, select [Erase] in Step 3.
R
R
Start
No
Erase
Back Set
Adding still pictures to My Clips (Add to My Clips)
You can also select still pictures and add them to My Clips.
Display the still picture you wish to add and press z to display the menu. Select [Add
to My Clips] and press z. Using FGHI, select My Clips and the order in which
you wish to add the pictures, then press z.
71
EN
Playback
3
Using the touch screen
You can use the touch panel to manipulate images.
Full-frame playback
Viewing additional images
• Slide your nger to the left to view later frames, right to
scroll view earlier frames.
Playback zoom
Lightly touch the screen to display the slider and P.
Slide the bar up or down to zoom in or out.
• Use your nger to scroll the display when the picture is
zoomed in.
• Tap P to display index playback.
Tap Q again for calendar playback and My Clips
playback.
Index/My Clips/Calendar Playback
Page ahead/Page back
• Slide your nger up to view the next page, down to view
the previous page.
• Use Q or R to choose the number of images
displayed.
• Tap R several times to return to single-frame
playback.
S
Viewing images
Tap an image to view it full frame.
Selecting and protecting images
In single-frame playback, lightly touch the screen to display the touch menu. You can
then perform the desired operation by touching the icons in the touch menu.
H
Select an image. You can select multiple images and delete them
collectively.
h
Images you want to share with a smartphone can be set.
g “Setting a transfer order on images (Share Order)” (P. 70)
0
Protects an image.
Do not touch the display with your ngernails or other sharp objects.
Gloves and monitor covers may interfere with touch screen operation.
72
EN
Menu functions (Basic operations)
4
4
Basic menu operations
The menus contain shooting and playback options that are not displayed by the live
control, and let you customize the camera settings for easier use.
W
Preliminary and basic shooting options
X
Advanced shooting options
q
Playback and retouch options
c
Customizing camera settings (P. 88 )
#
Accessory port menu options for accessory port devices such as EVF and
OLYMPUS PENPAL (P. 107)*
d
Camera setup (e.g., date and language)
* Not displayed at default settings
1
Press the MENU button to display the menus.
j
4:3
D
1
Shooting Menu 1
Card Setup
Reset/Myset
Picture Mode
Image Aspect
Back
Set
2
Digital Tele-converter Off
Press z to con rm the
setting
Operation guide
Press the MENU button
to go back one screen
Tab
A guide is displayed for about 2 seconds after you select an option.
• Press the INFO button to view or hide guides.
2
Use FG to select a tab and press z.
3
Select an item using FG and press z to display options for the
selected item.
oj/Y
2
1
Image Stabilizer
Bracketing
Multiple Exposure
# RC Mode
Intrvl. Sh./Time Lapse
HDR
Back Set
Shooting Menu 2
Off
Off
Off
Off
Off
The current setting is displayed
Function
z
Off
Intrvl. Sh./Time Lapse Off
2
1
Back
Shooting Menu 2
Image Stabilizer
Bracketing
HDR
j/Y
Off
Set
Multiple Exposure
#
RC Mode Off
Off
Y
12s
o
Y
2
s
T
S
Y
C
4
Use FG to highlight an option and press z to select.
• Press the MENU button repeatedly to exit the menu.
For the default settings of each option, refer to “Menu directory” (P. 138) .
Menu functions
73
EN
Menu functions (Shooting menus)
4
Using Shooting Menu 1/Shooting Menu 2
j
4:3
D
1
Shooting Menu 1
Card Setup
Reset/Myset
Picture Mode
Image Aspect
Back
Set
2
Digital Tele-converter Off
Shooting Menu 1 Shooting Menu 2
W
Card Setup (P. 73 )
Reset/Myset (P. 74 )
Picture Mode (P. 75 )
K (P. 76 )
Image Aspect (P. 56 )
Digital Tele-converter (P. 76 )
X j/Y (Sequential shooting/Self-timer)
(P. 54 , 77 )
Image Stabilizer (P. 53)
Bracketing (P. 78 )
HDR (P. 80)
Multiple Exposure (P. 81 )
Intrvl. Sh./Time Lapse (P. 82)
# RC Mode (P. 83 )
Formatting the card (Card Setup)
Cards must be formatted with this camera before rst use or after being used with
other cameras or computers.
All data stored on the card, including protected images, is erased when the card is
formatted.
When formatting a used card, con rm there are no images that you still want to keep
on the card. g “Usable cards” (P. 124)
1
Select [Card Setup] in W Shooting Menu 1.
2
Select [Format] and press z.
All Erase
Format
Card Setup
Back
Set
3
Select [Yes] and press z.
Formatting is performed.
Deleting all images (Card Setup)
All images taken are deleted. Protected images are not deleted.
1
Select [Card Setup] in W Shooting Menu 1.
2
Select [All Erase] and press z.
3
Select [Yes] and press z.
All images are deleted.
All Erase
Format
Card Setup
Back
Set
74
EN
Menu functions (Shooting menus)
4
Returning to default settings (Reset)
Camera settings can be easily restored to default settings.
1
Select [Reset/Myset] in W Shooting Menu 1.
2
Select [Reset] and press z.
Highlight [Reset] and press I to choose the reset type.
To reset all settings except the time, date, and a few
others, highlight [Full] and press z.
g “Menu directory” (P. 138)
3
Select [Yes] and press z.
Reset/Myset
Reset
Myset1
Myset2
Myset3
Myset4 No Data
No Data
No Data
No Data
Basic
Back
Set
Registering Favorites settings (Myset)
Saving Myset
With the exception of shooting mode, current camera settings can be saved to any of four
settings banks (“Myset”). Saved settings can be called up in P, A, S, and M modes.
1
Adjust settings in order to save.
2
Select [Reset/Myset] in W Shooting Menu 1.
3
Select the desired destination ([Myset1]–[Myset4]) and press I.
Selecting [Set] saves current settings, overwriting the settings currently in the bank.
To cancel the registration, select [Reset].
4
Select [Set] and press z.
Settings that can be saved to Myset g “Menu directory” (P. 138)
Using Myset
Sets the camera to the settings selected for Myset.
1
Select [Reset/Myset] in W Shooting Menu 1.
2
Select the desired settings ([Myset1]–[Myset4]) and
press z.
3
Select [Yes] and press z.
Reset/Myset
Reset
Myset1
Myset2
Myset3
Myset4 Set
Set
Set
Set
Basic
Back
Set
The shooting mode does not change when MySet is executed from a menu.
If you assign MySet to a button, you can execute it by simply pressing the button. With
this operation, the shooting mode will change to the stored mode.
You can also assign Myset settings to the mode dial. g “Mode Dial Function” (P. 89)
75
EN
Menu functions (Shooting menus)
4
Processing options (Picture Mode)
You can make individual adjustments to contrast, sharpness and other parameters in
[Picture Mode] (P. 61 ) settings. Changes to each picture mode are stored separately.
1
Select [Picture Mode] in W Shooting Menu 1.
j
4:3
D
1
2
Shooting Menu 1
Card Setup
Reset/Myset
Picture Mode
Image Aspect
Back
Set
Digital Tele-converter Off
2
Select an option with FG and press z.
3
Press I to display settings for the selected option.
h i-aJ K
Contrast Distinction between light and dark

Sharpness Sharpness of the image

Saturation Vividness of the color

k
Gradation Adjust tone (gradation).

Auto
Divides the image into detailed
regions and adjusts the brightness
separately for each region. This is
effective for images with areas of
large contrast in which the whites
appear too bright or the blacks
appear too dark.
Normal Use [Normal] mode for general uses.
High Key Gradation for a bright subject.
Low Key Gradation for a dark subject.
Effect
(i-Enhance)
Sets the extent that the effect will be
applied.
kk
Color Filter
(Monochrome)
Creates a black and white image.
The lter color is brightened and the
complementary color is darkened.
kk

N:None
Creates a normal black and white
image.
Ye:Yellow
Reproduces clearly de ned white
cloud with natural blue sky.
Or:Orange
Slightly emphasizes colors in blue
skies and sunsets.
R:Red
Strongly emphasizes colors in blue
skies and brightness of crimson
foliage.
G:Green
Strongly emphasizes colors in red lips
and green leaves.
76
EN
Menu functions (Shooting menus)
4
h i-aJ K
Monochrome
Color
Colors the black and white image.
kk

N:Normal
Creates a normal black and white
image.
S:Sepia Sepia
B:Blue Bluish
P:Purple Purplish
G:Green Greenish
% Tips
You can reduce the number of picture mode options displayed in the menu.
g “Picture Mode Settings” (P. 90)
You can also select art lter types and effects.
Changes to contrast have no effect at settings other than [Normal].
Image quality (K)
Select an image quality. You can select a separate image quality for photographs and
movies. This is the same as the [K] item in live control. g “Selecting image quality
(still image quality mode)” (P. 56), “Selecting image quality (movie image quality mode)”
(P. 57)
You can change the JPEG image size and compression ratio combination, and [X] and
[W] pixel counts. [K Set], [Pixel Count] g “Combinations of movie image sizes and
compression rates” (P. 106)
You can change the shooting time of movie clips. g
“Selecting image quality (movie
image quality mode)” (P. 57)
Digital Zoom (Digital Tele-converter)
Digital Tele-converter is used to zoom in beyond the current zoom ratio. The camera
saves the center crop. Zoom is increased by about 2×.
1
Select [On] for [Digital Tele-converter] in W Shooting Menu 1.
2
The view in the monitor will be enlarged by a factor of two.
The subject will be recorded as it appears in the monitor.
Digital zoom is not available with multiple exposures, in J mode, or when T, s, f,
w, or m is selected in SCN mode.
This function is not available when [Movie Effect] is [On] in n mode.
When a RAW image is displayed, the area visible in the monitor is indicated by a frame.
AF target drops.
77
EN
Menu functions (Shooting menus)
4
Setting the self timer (j/Y)
You can customize the self timer operation.
1
Select [j/Y] in X Shooting Menu 2.
oj/Y
2
1
Image Stabilizer
Bracketing
Multiple Exposure
# RC Mode
Intrvl. Sh./Time Lapse
HDR
Back Set
Shooting Menu 2
Off
Off
Off
Off
Off
2
Select [YC] (custom) and press I.
3
Use FG to select the item and press I.
• Use FG to select the setting and press z.
Number of Frames Sets the number of frames to be shot.
Y Timer
Sets the time after the shutter button is pressed until the picture
is taken.
Interval Length
Sets the shooting interval for the second and subsequent
frames.
Every Frame AF
Sets whether or not to perform AF right before a picture is taken
with self timer.
78
EN
Menu functions (Shooting menus)
4
Varying settings over a series of photographs (bracketing)
“Bracketing” refers to the act of varying settings automatically over a series of shots
or a series of images to “bracket” the current value. You can store bracket shooting
settings and turn bracket shooting off.
1
Select [Bracketing] in X Shooting Menu 2 and
press z.
j/Y o
2
1
Shooting Menu 2
Off
Image Stabilizer
Bracketing
Multiple Exposure
# RC Mode
Back
Off
Intrvl. Sh./Time Lapse
Off
HDR
Off
Off
Set
2
After selecting [On], press I and select a bracket
shooting type.
AE BKT
WB BKT
FL BKT
ISO BKT
ART BKT
--
--
--
--
A-- G--
Bracketing
Back
Set
3
Press I, select settings for parameters such as the number of shots, and
then press the z button.
Continue to press the z button until you return to the screen in step 1.
If you select [Off] in step 2, bracket shooting settings will be saved and you can shoot
normally.
When you select bracket shooting, t appears on the screen.
Cannot be used during HDR photography.
Cannot be used at the same time as time lapse shooting.
You cannot shoot during bracket shooting if there is not enough space on the camera’s
memory card for the selected number of frames.
You can switch the bracket shooting [On] or [Off] using the button assigned with [Button
Function] (P. 98).
AE BKT (AE bracketing)
The camera varies the exposure of each shot. The modi cation amount can be selected from
0.3 EV, 0.7 EV, or 1.0 EV. In single-frame shooting mode, one photograph is taken each time
the shutter button is pressed all the way down, while in sequential shooting mode the camera
continues to take shots in the following order while the shutter button is pressed all the way
down: no modi cation, negative, positive. Number of shots: 2, 3, 5, or 7
• The t indicator turns green during bracketing.
The camera modi es exposure by varying aperture and
shutter speed (mode P), shutter speed (modes A and M),
or aperture (mode S).
The camera brackets the value currently selected for
exposure compensation.
The size of the bracketing increment changes with the value
selected for [EV Step]. g “EV Step” (P. 91)
AE BKT
WB BKT
FL BKT
ISO BKT
ART BKT
--
--
--
--
A-- G--
--
2f 0.7EV
2f 0.3EV
2f 1.0EV
3f 0.3EV
3f 0.7EV
3f 1.0EV
Off
Bracketing
Back
Set
79
EN
Menu functions (Shooting menus)
4
WB BKT (WB bracketing)
Three images with different white balances (adjusted in speci ed color directions) are
automatically created from one shot, starting with the value currently selected for white
balance. WB bracketing is available in P, A, S and M modes.
White balance can be varied by 2, 4, or 6 steps on each of
the A – B (Amber – Blue) and G – M (Green – Magenta) axes.
The camera brackets the value currently selected for white
balance compensation.
A-B G-M
WB BKT
3f 4Step 3f 4Step
Back Set
FL BKT (FL bracketing)
The camera varies ash level over three shots (no modi cation on the rst shot, negative on
the second, and positive on the third). In single-frame shooting, one shot is taken each time
the shutter button is pressed; in sequential shooting, all shots are taken while the shutter
button is pressed.
• The t indicator turns green during bracketing.
The size of the bracketing increment changes with the value
selected for [EV Step]. g “EV Step” (P. 91)
AE BKT
WB BKT
FL BKT
ISO BKT
ART BKT
--
--
--
--
A-- G--
3f 0.7EV
3f 0.3EV
3f 1.0EV
Off
Bracketing
Back
Set
ISO BKT (ISO bracketing)
The camera varies the sensitivity over three shots while keeping the shutter speed and
aperture xed. The modi cation amount can be selected from 0.3 EV, 0.7 EV, or 1.0 EV. Each
time the shutter button is pressed, the camera shoots three frames with the set sensitivity
(or if auto sensitivity is selected, the optimal sensitivity setting) on the rst shot, negative
modi cation on the second shot, and positive modi cation on the third shot.
The size of the bracketing increment does not change with
the value selected for [ISO Step]. g “Using the custom
menus” (P. 88)
Bracketing is performed regardless of the upper limit set with
[ISO-Auto Set]. g “ISO-Auto Set” (P. 92)
AE BKT
WB BKT
FL BKT
ISO BKT
ART BKT
--
--
--
--
A-- G--
3f 0.7EV
3f 0.3EV
3f 1.0EV
Off
Bracketing
Back
Set
ART BKT (ART bracketing)
Each time the shutter is released, the camera records multiple
images, each with a different art lter setting. You can turn art
lter bracketing on or off separately for each picture mode.
Recording may take some time.
ART BKT cannot be combined with WB BKT or ISO BKT.
ART BKT
Pop Art
Light Tone
Pin Hole
Diorama
Soft Focus
Pale&Light Color
Grainy Film
Back
80
EN
Menu functions (Shooting menus)
4
Taking HDR (High Dynamic Range) images
The camera shoots several images and automatically combines them into an HDR
image. You can also shoot several images and perform HDR imaging on a computer
(HDR bracketing photography). In mode M, exposure can be adjusted as desired for
HDR photography.
1
Select [HDR] in X Shooting Menu 2 and press z.
oj/Y
2
1
Shooting Menu 2
Image Stabilizer
Bracketing
Multiple Exposure
# RC Mode
Intrvl. Sh./Time Lapse
HDR
Off
Off
Off
Off
Off
Back Set
2
Select a type of HDR photography and press the z button.
HDR1
Four shots are taken, each with a different exposure, and the shots
are combined into one HDR image inside the camera.
HDR2 provides a more impressive image than HDR1. ISO sensitivity
is xed to 200. Also, the slowest available shutter speed is 1 second
and the longest available exposure is 4 seconds.
HDR2
3F 2.0EV
HDR bracketing is performed. Select the number of images and the
exposure difference.
HDR imaging processing is not performed.
5F 2.0EV
7F 2.0EV
3F 3.0EV
5F 3.0EV
3
Shoot.
When you press the shutter button, the camera automatically shoots the set number
of images.
If you assign HDR to a button using the [Button Function] (P. 98), you can press the
button to call up the HDR shooting screen.
If you shoot with a slower shutter speed, there may be more noticeable noise.
Attach the camera to a tripod or other stabilizing item and then shoot.
The image displayed on the monitor or in the view nder while shooting will differ from the
HDR-processed image.
In the case of [HDR1] and [HDR2], the HDR-processed image will be saved as a JPEG
le. When the image quality mode is set to [RAW], the image is recorded in RAW+JPEG.
RAW images are recorded with an exposure of –0.5 EV.
If set to [HDR1]/[HDR2], the picture mode is xed to [Natural] and the color setting is xed
to [sRGB]. [Full-time AF] does not operate.
Flash photography, bracketing, multiple exposure and time lapse shooting cannot be used
at the same time as HDR photography.
81
EN
Menu functions (Shooting menus)
4
Recording multiple exposures in a single image (multiple exposure)
Record multiple exposures in a single image, using the option currently selected for
image quality.
1
Select [Multiple Exposure] in X Shooting Menu 2.
2
Adjust settings.
Number of
Frames
Select [2f].
Auto Gain
When set to [On], the brightness of each
frame is set to 1/2 and the images are
overlaid. When set to [Off], the images are
overlaid with the original brightness of each
frame.
Overlay
When set to [On], a RAW image recorded
on a card can be overlaid with multiple
exposures and stored as a separate image.
The number of pictures taken is one.
a is displayed in the monitor while multiple exposure
is in effect.
Multiple Exposure
Number of Frames
Auto Gain
Overlay Off
Off
Off
Set
Back
250 F5.6
ISO
400
0.00.0
01:02:0301:02:03
3838
P
3
Shoot.
a is displayed in green when shooting starts.
• Press to delete the last shot.
The previous shot is superimposed on the view through the lens as a guide to
framing the next shot.
% Tips
To overlay 3 or more frames: Select RAW for [K] and use the [Overlay] option to make
repeated multiple exposures.
For more information on overlaying RAW images: g “Image overlay” (P. 86)
The camera will not go to sleep while multiple exposure is in effect.
Photographs taken with other cameras cannot be included in a multiple exposure.
When [Overlay] is set to [On], the images displayed when a RAW image is selected are
developed with the settings at the time of shooting.
To set the shooting functions, cancel multiple exposure shooting rst. Some functions
cannot be set.
Multiple exposure is cancelled automatically from the rst picture in the following
situations.
The camera is turned off/The q button is pressed/The MENU button is pressed/The
shooting mode is set to a mode other than P, A, S, M/The battery power runs out/Any
cable is connected to the camera
When a RAW image is selected using [Overlay], the JPEG image for the image recorded
in RAW+JPEG is displayed.
When shooting multiple exposures using bracketing, priority is given to multiple exposure
shooting. While the overlay image is being saved, bracketing is reset to the factory default
setting.
82
EN
Menu functions (Shooting menus)
4
Shooting automatically with a xed interval (Time lapse shooting)
You can set the camera to shoot automatically with a set time lapse. The shot frames can
also be recorded as into a single movie. This setting is only available in P/A/S/M modes.
1
Select [Intrvl. Sh./Time Lapse] in X Shooting
Menu 2.
oj/Y
2
1
Shooting Menu 2
Image Stabilizer
Bracketing
Multiple Exposure
# RC Mode
Intrvl. Sh./Time Lapse
HDR
Off
Off
Off
Off
Off
Back Set
2
Select [On], press I and make the following settings.
Numeber of Frames Sets the number of frames to be shot.
Start Waiting Time Sets waiting time before starting to shot.
Interval Length Sets interval between shots after shooting starts.
Time Lapse Movie
Sets recording format of frame sequence.
[Off]: Records each frame as a still picture.
[On]: Records each frame as a still picture and generates and
records a single movie from the frame sequence.
3
Shoot.
Frames are shot even if the image is not in focus after AF. If you wish to x the focus
position, shoot in MF.
[Rec View] operates for 0.5 seconds.
If either of the time before shooting, or shooting interval is set to 1 minute 31 seconds
or longer, the monitor and camera power will turn off after 1 minute. 10 seconds before
shooting, the power will automatically turn on again. When the monitor is off, press the
shutter button to turn it on again.
If the AF mode is set to [C-AF] or [C-AF+TR], it is automatically changed to [S-AF].
Touch operations are disabled during time lapse shooting.
Cannot be used with HDR photography.
It is not possible to combine time lapse shooting with bracketing, multiple exposure, and
bulb, time or composite photography.
• The ash will not work if the ash charging time is longer than the interval between shots.
If the camera automatically turns off in interval between shots, it will turn on in time for the
next shot.
If the any of the still pictures are not recorded correctly, the time lapse movie will not be
generated.
If there is insuf cient space on the card, the time lapse movie will not be recorded.
Time lapse shooting will cancelled if any of the following is operated: Mode dial, MENU
button, q button, lens release button, or connecting the USB cable.
If you turn off the camera, time lapse shooting will be cancelled.
If there is not enough charge left on the battery, the shooting may end partway through.
Make sure the battery is suitably charged before starting.
83
EN
Menu functions (Shooting menus)
4
Wireless remote control ash photography
You can take wireless ash photographs using the built-in ash and a special ash with
a remote control function. g “Wireless remote control ash photography” (P. 127)
84
EN
Menu functions (Playback menus)
4
Using the playback menu
Playback Menu
m (P. 68 )
m
R
2
1
Playback Menu
Edit
Set
Reset Protect
Connection to Smartphone
Back
On
Print Order
R (P. 84 )
Edit (P. 84 )
Print Order (P. 121 )
Reset Protect (P. 86 )
Connection to Smartphone (P. 111 )
Displaying images rotated (R)
When set to [On], photographs taken with the camera rotated in portrait orientation are
automatically rotated and displayed in portrait orientation.
Editing still images
Recorded images can be edited and saved as new images.
1
Select [Edit] in the q Playback Menu and press z.
2
Use FG to select [Sel. Image] and press z.
3
Use HI to select the image to be edited and press z.
[RAW Data Edit] is displayed if the picture is a RAW image, [JPEG Edit] if it is a JPEG
image. If the image was recorded in RAW+JPEG format, both [RAW Data Edit] and
[JPEG Edit] will be displayed. Select the menu for the image to be edited.
4
Select [RAW Data Edit] or [JPEG Edit] and press z.
RAW Data
Edit
Create a JPEG copy of a RAW image edited according to the settings.
Current
The JPEG copy is processed using the current camera
settings. Adjust the camera settings before choosing this
option.
Custom1
Editing can be performed while changing the settings
on the monitor. You can save the settings used. After
changing the settings, press R to see them re ected on
the screen.
Custom2
ART BKT
The image is edited using settings for the selected art
lter.
85
EN
Menu functions (Playback menus)
4
JPEG Edit
Choose from the following options:
[Shadow Adj]: Brightens a dark backlit subject.
[Redeye Fix]: Reduces the red-eye phenomenon during ash shooting.
[P]: Use the control dial (P) to choose the
size of the crop and FGHI to specify the
crop position.
O
Set
[Aspect]: Changes the aspect ratio of images from 4:3 (standard) to [3:2],
[16:9], [1:1], or [3:4]. After changing the aspect ratio, use FGHI to
specify the trimming position.
[Black & White]: Creates black and white images.
[Sepia]: Creates sepia-toned images.
[Saturation]: Sets the color depth. Adjust the color saturation checking the
picture on the screen.
[Q]: Converts the image le size to 1280 × 960, 640 × 480, or 320 × 240.
Images with an aspect ratio other than 4:3 (standard) are converted to the
closest image le size.
[e-Portrait]: Makes skin look smooth and translucent.
You may not be able to compensate depending on the image if face
detection fails.
5
When the settings are complete, press z.
The settings will be applied to the image.
6
Select [Yes] and press z.
The edited image is stored in the card.
3D photos, movies, and temporarily saved les for PHOTO STORY cannot be edited.
Red-eye correction may not work depending on the image.
Editing of a JPEG image is not possible in the following cases:
When an image is processed on a PC, when there is not enough space in the card
memory, when an image is recorded on another camera
When resizing ([Q]) an image, you cannot select a larger number of pixels than was
originally recorded.
• [P] and [Aspect] can only be used to edit images with an aspect ratio of 4:3 (standard).
When [Picture Mode] is set to [ART], [Color Space] is locked to [sRGB].
86
EN
Menu functions (Playback menus)
4
Image overlay
Up to 3 frames of RAW images taken with the camera can be overlaid and saved as a
separate image.
The image is saved with the record mode set at the time the image is saved. (If [RAW] is
selected, the copy will be saved in [YN+RAW] format.)
1
Select [Edit] in the q Playback Menu and press z.
2
Use FG to select [Image Overlay] and press z.
3
Select the number of images in the overlay and press z.
4
Use FGHI to select the RAW images that will
be used in the overlay.
When you have selected the number of images
speci ed in Step 3, the overlay will be displayed.
RAW RAW RAW
RAW
RAW RAW RAW
Image Overlay
Back
Set
5
Adjust gain.
• Use HI to select an image and use FG to adjust
gain.
Gain can be adjusted in the range 0.1 2.0. Check the
results in the monitor.
Image Overlay
Back
Set
×1.5×1.5×0.3 ×0.5
6
Press z. A con rmation dialog will be displayed; select [Yes] and press
z.
% Tips
To overlay 4 or more frames, save the overlay image as a RAW le and use
[Image Overlay] repeatedly.
Audio recording
Add an audio recording (up to 30 sec. long) to the current photograph.
This is the same function as [R] during playback. (P. 70 )
Canceling all protections
This function lets you cancel the protection of several images at one time.
1
Select [Reset Protect] in the q Playback Menu.
2
Select [Yes] and press z.
87
EN
Menu functions (Setup menus)
4
Using the setup menu
Use the d Setup Menu to set the basic camera functions.
--.--.-- --:--X
W
j
±0
k
±0
2
1
Setup Menu
English
0.5sec
Wi-Fi Settings
c/#
Menu Display
Firmware
Rec View
Back
Set
Option Description
g
X
(Date/time
setting)
Set the camera clock.
17
W
(Changing
the display
language)
You can change the language used for the on-screen display and
error messages from English to another language.
i
(Monitor
brightness
adjustment)
You can adjust the brightness and
color temperature of the monitor. Color
temperature adjustment will affect only
the monitor display during playback.
Use HI to highlight j (color
temperature) or k (brightness) and
FG to adjust the value.
Press the INFO button to switch
between [Natural] and [Vivid] monitor
color display.
-
2
j
+1
k
Vivid Natural
Back Set
Rec View Choose whether pictures are displayed immediately after shooting
and for how long. This is useful for making a brief check of the
picture you have just taken. Pressing the shutter button halfway
while checking the picture lets you resume shooting immediately.
[0.3sec] [20sec]: Selects the number of seconds to display each
picture.
[Off]: The picture being recorded to the card is not displayed.
[AUTOq]: Displays the image being recorded, and then switches to
playback mode. This is useful for erasing a picture after checking it.
Wi-Fi
Settings
Set up the camera to connect to a smartphone with wireless LAN
connectivity using the wireless function on the camera.
111
c/# Menu
Display
Choose whether to display the custom menus or accessory port
menu.
Firmware Your product’s rmware version will be displayed. When you make
inquiries about your camera or accessories or when you want to
download software, you will need to state which version of each of
the products you are using.
88
EN
Menu functions (Custom menus)
4
Using the custom menus
Camera settings can be customized using the c Custom Menu.
Custom Menu
R
AF/MF (P. 88)
S
T
U
V
W
X
2
1
R
Custom Menu
Set
AF/MF
Button/Dial
Release/
j
/Image Stabilizer
Disp/
8
/PC
Exp/
p
/ISO
#
Custom
K
/Color/WB
Back
S
Button/Dial (P. 89)
T
Release/j/Image Stabilizer (P. 89)
U
Disp/8/PC (P. 90)
V
Exp/p/ISO (P. 91)
W
# Custom (P. 92)
X
K/Color/WB (P. 93)
Y
Record/Erase (P. 94)
Z
Movie (P. 95)
b K Utility (P. 96)
R AF/MF
Option Description
g
AF Mode Choose the AF mode. You can set separate focusing
methods for still photography mode and n mode.
49
Full-time AF If [On] is selected, the camera will continue to focus even
when the shutter button is not pressed halfway. Cannot be
used when using a Four Thirds system lens.
AEL/AFL Customize AF and AE lock. 97
Reset Lens When set to [Off], the focus position of the lens is not reset
even when the power is turned off. When set to [On], the
focus of power zoom lenses is also reset.
Bulb/Time
Focusing
You can change the focus position during exposure by using
manual focus (MF). When set to [Off], rotation of the focus
ring is disabled.
Focus Ring You can customize how the lens adjusts to the focal point by
selecting the rotational direction of the focus ring.
MF Assist When set to [On], you can automatically switch to zoom or
peaking in manual focus mode by rotating the focus ring.
97
P Set Home
Choose the AF target position that will be saved as the
home position. p appears in the AF target selection
display while you choose a home position.
AF Illuminator Select [Off] to disable the AF illuminator.
I Face Priority
You can select the face priority or eye priority AF mode.
47
AF Area Pointer If you select [Off], the AF target frame will not be displayed
during con rmation.
MENU
c
R
89
EN
Menu functions (Custom menus)
4
S Button/Dial
Option Description
g
Button Function Choose the function assigned to the selected button.
98
[FFunction], [UFunction], [RFunction], [IFunction],
[GFunction], [nFunction], [lFunction]
Dial Function
You can change the function of the control dial (P).
PF / %
A Aperture value / F
S Shutter speed / F
M Shutter speed / Aperture value
q
[Prev/Next] / [G / Magnify]
In P, A, S, and M modes, the roles played before and after
F button is pressed are reversed.
Dial Direction
Choose the direction in which the dial is rotated to adjust
shutter speed or aperture. Change the program shift direction.
Mode Dial
Function
You can assign registered Myset settings to any position on
the mode dial.
T Release/j/Image Stabilizer
Option Description
g
Rls Priority S If [On] is selected, the shutter can be released even when
the camera is not in focus. This option can be set separately
for S-AF (P. 49) and C-AF (P. 49) modes.
Rls Priority C
j L fps
Choose the frame advance rates for [S] and [T]. Figures
are the approximate maximums.
54
j H fps
j Image
Stabilization
Activates/deactivates image stabilization for continuous
shooting.
Half Way Rls With
IS
When set to [Off], the IS (Image Stabilization) function while
the shutter button is pressed halfway will not be activated.
Lens I.S. Priority
If [On] is selected, priority is given to the lens function operation
when using a lens with an image stabilization function.
This option has no effect on lenses that are equipped with
an image stabilization switch.
Release Lag-Time If [Short] is selected, the time lag between fully pressing the
shutter button and the shot being taken can be shortened.*
* This will shorten the battery life. Also make sure that the camera is not subject to sharp
impacts while in use. Such impacts may cause the monitor to stop displaying subjects. If
this happens, turn the power off and on again.
MENU
c
S
MENU
c
T
90
EN
Menu functions (Custom menus)
4
U Disp/8/PC
Option Description
g
HDMI [HDMI Out]: Selecting the digital video signal format for
connecting to a TV via an HDMI cable.
[HDMI Control]: Select [On] to allow the camera to be
operated using remotes for TVs that support HDMI control.
100
Video Out Choose the video standard ([NTSC] or [PAL]) used in your
country or region.
100
KControl
Settings
Choose the controls displayed in each shooting mode.
Controls
Shooting mode
A
P/A/
S/M
ART SCN
Live Control (P. 44)

Live SCP (P. 103)

Live Guide (P. 22)
–––
Art Menu ––
Scene Menu –––
Press the INFO button to switch the screen contents.
102
G/Info Settings
Choose the information displayed when the INFO button is
pressed.
[q Info]: Choose the information displayed in full frame
playback.
[LV-Info]: Choose the information displayed when the
camera is in shooting mode.
[G Settings]: Choose the information displayed in index,
“My Clips”, and calendar playback.
105,
106
Displayed Grid
Select [w], [x], [y], [X] or [x] to display a grid on the
monitor.
Picture Mode
Settings
Display only the selected picture mode when a picture mode
is selected.
Histogram
Settings
[Highlight]: Choose the lower bound for the highlight display.
[Shadow]: Choose the upper bound for the shadow display.
105
Mode Guide Choose [Off] to not display help for the selected mode when
the mode dial is rotated to a new setting.
20
Live View Boost Shoot while checking the subject even under low-light
conditions.
If [On] is selected, prioritize image visibility in dark
conditions. This will make the response to button operations
on the camera slower.
Frame Rate Select [High] to reduce frame lag. However, the image
quality may drop.
Art LV Mode [mode1]: The lter effect is always displayed.
[mode2]: Filter effects are not visible in the monitor while the
shutter button is pressed halfway. Choose for a smooth
display.
Flicker reduction Reduce the effects of icker under some kinds of lighting,
including uorescent lamps. When icker is not reduced by
the [Auto] setting, set to [50Hz] or [60Hz] in accordance with
the commercial power frequency of the region where the
camera is used.
MENU
c
U
91
EN
Menu functions (Custom menus)
4
Option Description
g
LV Close Up Mode [mode1]: Pressing the shutter button halfway cancels zoom.
[mode2]: Zoom is not cancelled when the shutter button is
pressed halfway.
48
z Lock
If [On] is selected, the preview switches between lock and
release every time the button registered for preview is
pressed.
q Close Up Mode
[mode1]: Press U to zoom in (to a maximum of 14 ×) and
press G to zoom out.
[mode2]: Press U to display the zoom frame for the
speci ed zoom ratio. Press U again to zoom in.
Peaking Settings You can switch the edge enhancement color between white
and black.
Backlit LCD If no operations are performed for the selected period, the
backlight will dim to save battery power. The backlight will
not dim if [Hold] is selected.
Sleep The camera will enter sleep (energy saving) mode if no
operations are performed for the selected period. The
camera can be reactivated by pressing the shutter button
halfway.
8 (Beep sound)
When set to [Off], you can turn off the beep sound that is
emitted when the focus locks by pressing the shutter button.
USB Mode Choose a mode for connecting the camera to a computer or
printer. Choose [Auto] to display USB mode options every
time the camera is connected.
V Exp/p/ISO
Option Description
g
EV Step Choose the size of the increments used when selecting
shutter speed, aperture, exposure compensation, and other
exposure parameters.
Noise Reduct. This function reduces the noise that is generated during
long exposures.
[Auto]: Noise reduction is performed at slow shutter speeds,
or when the internal temperature of the camera has risen.
[On]: Noise reduction is performed with every shot.
[Off]: Noise reduction off.
After shooting, processing time takes about the same
amount of time as shooting time.
[Off] is selected automatically during sequential shooting.
This function may not work effectively with some shooting
conditions or subjects.
33
Noise Filter Choose the amount of noise reduction performed at high
ISO sensitivities.
ISO Set ISO sensitivity. 51
ISO Step Select the increments available for choosing ISO sensitivity.
MENU
c
V
U Disp/8/PC
MENU
c
U
92
EN
Menu functions (Custom menus)
4
Option Description
g
ISO-Auto Set Choose the upper limit and default value used for ISO
sensitivity when [Auto] is selected for ISO.
[High Limit]: Choose the upper limit for auto ISO sensitivity
selection.
[Default]: Choose the default value for auto ISO sensitivity
selection.
ISO-Auto Choose the shooting modes in which [Auto] ISO sensitivity
is available.
[P/A/S]: Auto ISO sensitivity selection is available in all
modes except M. ISO sensitivity is xed at ISO200 in mode
M.
[All]: Auto ISO sensitivity selection is available in all modes.
Metering Choose a metering mode according to the scene. 50
AEL Metering Choose the metering method used for AE lock (P. 97).
[Auto]: Use the currently selected metering method.
Bulb/Time Timer Choose the maximum exposure for bulb and time
photography.
Bulb/Time Monitor Set the monitor brightness when [BULB], [TIME], or [COMP]
is used.
Live Bulb Choose the display interval during shooting. Some
restrictions apply. The frequency drops at high ISO
sensitivities. Choose [Off] to disable the display. Tap the
monitor or press the shutter button halfway to refresh the
display.
Live Time
Anti-Shockz
Choose the delay between the shutter button being pressed
and the shutter being released. This diminishes camera
shake caused by vibrations. This feature is useful in
situations such as microscope photography and
astrophotography.
Choose 0 seconds when you want to reduce slight blurring
due to shutter operation.
It is also useful for sequential shooting (P. 54) and self timer
photography (P. 54). However, sequential shooting is not
available when this setting is set to 0 seconds.
Composite
Settings
Set an exposure time to be the reference in composite
photography (P. 34).
W # Custom
Option Description
g
# X-Sync.
Choose the shutter speed used when the ash res.
106
# Slow Limit
Choose the slowest shutter speed available when a ash is
used.
106
w+F
When set to [On], the exposure compensation value is
added to the ash compensation value.
45, 60
MENU
c
W
V Exp/p/ISO
MENU
c
V
93
EN
Menu functions (Custom menus)
4
X K/Color/WB
Option Description
g
K Set
You can select the JPEG image quality mode from
combinations of three image sizes and four compression
rates.
1) Use HI to select a
combination ([K1]
– [K4]) and use FG
to change.
2) Press z.
F
1
SF
Y
2
F
X
3
N
W
4
SF
W
D
Set
Pixel Count
Back
Set
Compression
rate
Image size
56
Pixel Count
Choose the pixel count for [X]- and [W]-size images.
1) Select [Xiddle] or
[Wmall] and press I.
2) Choose a pixel count
and press z.
Xiddle
Wmall
2560×1920
1280×960
Pixel Count
Set
Back
56
Shading Comp. Choose [On] to correct peripheral illumination according to
the type of lens.
Compensation is not available for teleconverters or
extension tubes.
Noise may be visible at the edges of photographs taken at
high ISO sensitivities.
WB Set the white balance. This is the same as the live control
setting. You can also ne-tune the white balance for each
mode. You can ne-tune each setting from White balance
compensation on the LV super control panel (P. 103).
52
All >
[All Set]: Use the same white balance compensation in all
modes except [CWB].
[All Reset]: Set white balance compensation for all modes
except [CWB] to 0.
W Keep Warm
Color
Select [Off] to eliminate “warm” colors from pictures taken
under incandescent lighting.
#+WB
Adjust white balance for use with a ash.
Color Space You can select how colors are reproduced on the monitor or
printer.
MENU
c
X
94
EN
Menu functions (Custom menus)
4
Y Record/Erase
Option Description
g
Quick Erase
If [On] is selected, pressing the button in the playback
display will immediately delete the current image.
RAW+JPEG Erase Choose the action performed when a photograph recorded
at a setting of RAW+JPEG is erased in single-frame
playback (P. 69).
[JPEG]: Only the JPEG copy is erased.
[RAW]: Only the RAW copy is erased.
[RAW+JPEG]: Both copies are erased.
Both the RAW and JPEG copies are deleted when selected
images are deleted or when [All Erase] (P. 73) is selected.
56
File Name [Auto]: Even when a new card is inserted, the le numbers
are retained from the previous card. File numbering
continues from the last number used or from the highest
number available on the card.
[Reset]: When you insert a new card, the folder numbers
starts at 100 and the le name starts at 0001. If a card
containing images is inserted, the le numbers start at the
number following the highest le number on the card.
Edit Filename Choose how image les are named by editing the portion of
the lename highlighted below in gray.
sRGB: Pmdd0000.jpg Pmdd
Adobe RGB: _mdd0000.jpg mdd
Priority Set Choose the default selection ([Yes] or [No]) for con rmation
dialogs.
dpi Settings Choose the print resolution.
Copyright
Settings*
Add the names of the photographer and copyright holder to
new photographs. Names can be up to 63 characters long.
[Copyright Info.]: Select [On] to include the names of the
photographer and copyright holder in the Exif data for new
photographs.
[Artist Name]: Enter the name of the photographer.
[Copyright Name]: Enter the name of the copyright holder.
1) Highlight a character 1 and press z to add the
highlighted character to the name 2.
2) Repeat Step 1 to complete the name, then highlight
[END] and press z.
To delete a character, press the INFO button to
place the cursor in the name area 2, highlight the
character, and press .
!”#$%&
()
*+, - . /
01234567
89 : ; <=>?
@
ABCDEFGH I J KLMNO
PQRSTUVWX Y Z
[]_
a b c d e f g h i j k l m n END
opqr s t uvwxyz
{}
ABCDE
05/63
Delete
Copyright Name
Cancel Set
2
1
* OLYMPUS does not accept liability for damages arising from disputes involving the use of
[Copyright Settings]. Use at your own risk.
MENU
c
Y
95
EN
Menu functions (Custom menus)
4
Z Movie
Option Description
g
nMode
Choose a movie record mode. This option can also be
selected using the live control.
37
Movie R
Choose [Off] to record silent movies. This option can also
be selected using the live control.
62
Recording Volume Choose the sensitivity of the camera’s internal microphone.
Adjust the sensitivity using FG while checking the peak
sound level picked up by the microphone over the previous
few seconds.
KVolume Limiter
If [On] is selected, the volume is automatically regulated
when the volume picked up by the microphone is louder
than normal.
Wind Noise
Reduction
Reduce wind noise during recording.
Movie Effect
Choose [On] to enable movie effects in n mode.
37
Movie+Photo
Mode
Choose the way in which photographs are taken during
movie recording.
[mode1]: Take photographs during movie recording without
stopping recording.
[mode2]: Stop recording to take photographs. Recording will
resume after the photograph is taken.
In mode2 and certain shooting modes, it is only possible
to capture a single-frame as a picture during recording.
Other shooting functions may also be limited.
If the record mode for the movie is Motion JPEG (H or
I), the camera is set to mode2.
38
MENU
c
Z
96
EN
Menu functions (Custom menus)
4
b K Utility
Option Description
g
Pixel Mapping The pixel mapping feature allows the camera to check and
adjust the image pickup device and image processing functions.
133
Exposure Shift Adjust correct exposure separately for each metering mode.
This reduces the number of exposure compensation options
available in the selected direction.
The effects are not visible in the monitor. To make normal
adjustments to the exposure, perform exposure compensation
(P. 45).
: Warning
Level
Choose the battery level at which the 8 warning is displayed.
16
Level Adjust You can calibrate the angle of the level gauge.
[Reset]: Resets adjusted values to the default settings.
[Adjust]: Sets the current camera orientation as the 0 position.
Touch Screen
Settings
Activate the touch screen. Choose [Off] to disable the touch
screen.
Eye-Fi* Enable or disable upload when using an Eye-Fi card. Displayed
when an Eye-Fi card is inserted.
Electronic
Zoom Speed
You can change the zoom speed used when operating the power
zoom lens with the zoom ring.
* Use in accordance with local regulations. Onboard airplanes and in other locations in
which the use of wireless devices is prohibited, remove the Eye-Fi card from the camera,
or select [Off] for [Eye-Fi]. The camera does not support the “endless” Eye-Fi mode.
MENU
c
b
97
EN
Menu functions (Custom menus)
4
AEL/AFL
MENU c R [AEL/AFL]
Autofocus and metering can be performed by pressing the
button to which AEL/AFL has been assigned. Choose a
mode for each focus mode.
AEL/S-AF
AEL
AEL
AFL
mode1
S-AF AEL/AFL
ExposureFully
Half Way
Back Set
AEL/AFL
Mode
Shutter button function
AEL/AFL Button
function
Half-press Full press
When holding down
AEL/AFL
Focus Exposure Focus Exposure Focus Exposure
S-AF
mode1 S-AF Locked Locked
mode2 S-AF Locked Locked
mode3 Locked S-AF
C-AF
mode1 C-AF start Locked Locked Locked
mode2 C-AF start Locked Locked Locked
mode3 Locked Locked C-AF start
mode4 Locked Locked C-AF start
MF
mode1 Locked Locked
mode2 Locked Locked
mode3 Locked S-AF
MF Assist
MENU c R [MF Assist]
This is a focus assist function for MF. When the focus ring is rotated, the edge of the
subject is enhanced or a portion of the screen display is magni ed. When you stop
operating the focus ring, the screen returns to the original display.
Magnify Magni es a portion of the screen. The portion to be magni ed
can be set in advance using AF target. g [AF Area] (P. 46)
Peaking Displays clearly de ned outlines with edge enhancement. You
can select the enhancement color. g [Peaking Settings]
(P. 91)
[Peaking] can be displayed using button operations. The display is switched every time
the button is pressed. Assign the switching function to one of the buttons in advance using
[Button Function] ( P. 98).
When Peaking is in use, the edges of small subjects tend to be enhanced more strongly.
This is no guarantee of accurate focusing.
98
EN
Menu functions (Custom menus)
4
Assigning functions to buttons (Button Function)
MENU c S [Button Function]
See the table below for the functions that can be assigned. The options available vary
from button to button.
Button function items
[FFunction] / [UFunction] / [RFunction]*
1
/ [IFunction] / [GFunction] / [nFunction]
([Direct Function]*
2
/ [P]*
3
) / [lFunction]*
4
*1 Not available in n mode.
*2
Assign the function to each of FGHI.
*3 Choose the AF target.
*4 Choose the function assigned to the button on some lenses.
F
Adjust exposure compensation.
ISO Adjust ISO sensitivity.
WB Adjust white balance.
AEL/AFL AE lock or AF lock. The function changes according to the
[AEL/AFL] setting. When AEL is selected, press the button
once to lock the exposure and display u on the monitor.
Press the button again to cancel the lock.
R REC
Press the button to record a movie.
z (Preview)
Aperture is stopped down to the selected value while the
button is pressed. If [On] is selected for [zLock] in Custom
Menu, the aperture is held at the selected value even when
releasing the button.
k (One-touch white
balance)
The camera measures white balance when the button is
pressed (P. 53 ).
P (AF area)
Choose the AF target.
P Home
Pressing the button selects the AF target position saved with
[P Set Home] (P. 88 ). Press the button again to return to
previous mode. If the camera is turned off when the home
position is selected, the home position will be reset.
MF Press the button to select manual focus mode. Press the
button again to restore the previously selected AF mode.
RAWK
Press the button to toggle between JPEG and RAW+JPEG
record modes.
K TEST (Test Picture)
Pictures taken while the button is pressed are displayed in the
monitor but are not recorded to the memory card.
Myset1 – Myset4 Switches among the registered Myset settings when the
button is pressed. Press the button again to return. The
shooting mode will change regardless of the position of the
mode dial.
u
Turn the monitor backlight on and off.
I/H (Underwater
wide/underwater macro)
The button can be used to choose between I and H while
the underwater case is attached. Press and hold the button to
return to the previous mode. If you assign this function to a
button, switching between I and H while using a lens with
power zoom functionality will automatically set lens to the
WIDE end or TELE end.
99
EN
Menu functions (Custom menus)
4
Live Guide Press the button to display live guides.
b (Digital Tele-
converter)
Press the button to turn digital zoom [On] or [Off].
a (Magnify)
Press the button to display the zoom frame. Press again to
magnify the image. Press and hold the button to turn off the
zoom frame.
Peaking Each press of the button switches the monitor between
display/non-display. When Peaking is displayed, histogram
and highlight/shadow display are not available.
AF Stop Stops autofocus.
j/Y
Choose a sequential shooting or self timer option.
#
Choose a ash mode.
HDR Switches to HDR shooting with the saved settings. Hold down
this button and rotate the control dial to change the setting.
BKT Turns on BKT shooting using stored settings. Hold down this
button and rotate the control dial to change the setting.
GLock (Touch panel
lock)
Press and hold the button to enable and disable touch panel
operation.
Electronic Zoom When using a lens with a power zoom function, after pressing
the button, use the arrow pad for zooming operations.
100
EN
Menu functions (Custom menus)
4
Viewing camera images on TV
MENU c U [HDMI], [Video Out]
Use the separately sold cable with the camera to playback recorded images on your
TV. Connect the camera to an HD TV using an HDMI cable to view high-quality images
on a TV screen. When connecting TVs using an AV cable, rst set the camera’s [Video
Out] settings (P. 90).
Type A
AV cable (optional: CB-AVC3)
(Connect to the TV video input jack
(yellow) and audio input jack (white).)
HDMI cable
(Connect to the HDMI connector
on the TV.)
Multi-connector
HDMI connector
(type D)
1
Connect the TV and camera and switch the input source of the TV.
The camera monitor turns off when the cable is connected.
• Press the q button when connecting via an AV cable.
For details on changing the input source of the TV, refer to the TV’s instruction manual.
Depending on the TV’s settings, the displayed images and information may become
cropped.
If the camera is connected using both an AV and HDMI cables, it will assign priority to
HDMI.
If the camera is connected via an HDMI cable, you will be able to choose the digital video
signal type. Choose a format that matches the input format selected with the TV.
1080i Priority is given to 1080i HDMI output.
720p Priority is given to 720p HDMI output.
480p/576p
480p/576p HDMI output. 576p is used when [PAL] is selected for
[Video Out] (P. 90).
You cannot shoot pictures or movies when the HDMI cable is connected.
Do not connect the camera to other HDMI output devices. Doing so may damage the
camera.
HDMI output is not performed while connected via USB to a computer or printer.
101
EN
Menu functions (Custom menus)
4
Using the TV remote control
The camera can be operated by a TV remote control when connected to a TV that
supports HDMI control. g [HDMI] (P. 90)
You can operate the camera by following the operation guide displayed on the TV.
During single-frame playback, you can display or hide the information display by
pressing the “Red” button, and display or hide the index display by pressing the
“Green” button.
Some televisions may not support all features.
102
EN
Menu functions (Custom menus)
4
Choosing the control panel displays (KControl Settings)
MENU c U [ KControl Settings]
Sets whether or not to display control panels for option selection in each shooting
mode.
In each shooting mode, press z to insert a check in the control panel you want to
display.
How to display control panels
If multiple control panels have been selected (H) for display, press the z button to
display one of the control panels, and then press the INFO button to switch between
panels.
INFO
z
P/A/S/M
INFO
250250 F5.6
i
NORM
ISO
AUTO
AUTO
WB
AUTO
4:3
01:02:0301:02:03
10231023
WB
WB
AUTO
WBWBWB
AUTOAUTOAUTO
AUTOAUTO
L
N
4:3
WB
AUTO
WBWBWB
AUTOAUTOAUTO
P
WB Auto
AUTOAUTO
S-IS AUTOS-IS AUTO
FHD
F
Live control* LV super control
panel (P. 103)
Live guide*
z
Change Color Saturation
A
INFO
INFO
250250 F5.6
i
NORM
ISO
AUTO
AUTO
WB
AUTO
4:3
01:02:0301:02:03
10231023
WB
LV super control
panel (P. 103)
WB
AUTO
WBWBWB
AUTOAUTOAUTO
AUTOAUTO
FHD
F
L
N
4:3
WB
AUTO
WBWBWB
AUTOAUTOAUTO
WB Auto
AUTOAUTO
S-IS AUTOS-IS AUTO
Live control
INFO
Example: Live control and LV super control panel selected (H)
Art lter menu*
z
ART/SCN
INFO
Scene menu*
Vintage II
ART
13
ART
13
Portrait
1
250250 F5.6
i
NORM
ISO
AUTO
AUTO
WB
AUTO
4:3
01:02:0301:02:03
10231023
WB
F
INFO
INFO
WB
AUTO
WBWBWB
AUTOAUTOAUTO
AUTOAUTO
FHD
F
L
N
4:3
WB
AUTO
WBWBWB
AUTOAUTOAUTO
WB Auto
AUTOAUTO
S-IS AUTOS-IS AUTO
Live control LV super control
panel (P. 103)
Example: Art lter menu or scene menu and live control/LV super control panel
selected (H)
* At default setting, only this control panel is set to display. The control panel display cannot
be switched even when you press the INFO button.
103
EN
Menu functions (Custom menus)
4
LV super control panel
The LV super control panel displays the current status of the shooting settings. Touch
or use the arrow pad to select options and change the settings.
LV super control panel is not displayed at default settings. To use it, select (H) [Live
SCP] in KControl Settings (P. 90).
250250 F5.6
P
i
Recommended ISO
NORM
ISO
AUTO
AUTO
WB
AUTO
4:3
01:02:0301:02:03
10231023
2
1
6
7
8
9
a
0
cdfe b
5
3
4
Settings that can be modi ed using LV super control panel
1 Currently selected option
2 ISO sensitivity .................................P. 51
3 Flash mode .....................................P. 58
4 Flash compensation value ..............P. 60
5 Sequential shooting/Self-timer ........P. 54
6 White balance .................................P. 52
White balance compensation
7 Picture mode...................................P. 61
8 Sharpness N..................................P. 75
Contrast J .....................................P. 75
Saturation T .................................P. 75
Gradation z...................................P. 75
Color Filter x .................................P. 75
Monochrome Color y ....................P. 76
9 Color space.....................................P. 93
0 Button function assignment ............P. 98
a Face priority ....................................P. 47
b Metering mode ................................P. 50
c Aspect ratio .....................................P. 56
d Record mode ............................P. 56, 57
e AF mode .........................................P. 49
AF target .........................................P. 46
f Image stabilizer...............................P. 53
Not displayed in movie mode and PHOTO STORY mode.
104
EN
Menu functions (Custom menus)
4
1
Select [Live SCP] for each mode in
KControl Settings (P. 90) beforehand.
2
Press the z button to display the live
control and press the INFO button.
The LV super control panel is displayed.
Each time you press the INFO button, the
controls display changes.
If you want to use the LV super control panel
as the main control screen, switch off [Live
control] in KControl Settings (P. 90). You can
now use the z button to display the LV super
control panel.
3
Tap the desired item.
The item will be highlighted.
250250 F5.6
i
NORM
ISO
AUTO
AUTO
WB
AUTO
4:3
01:02:0301:02:03
10231023
WB
4
Press the z button, and select a settings option.
WB
AUTO
WBWBWB
AUTOAUTOAUTO
AUTOAUTO
L
N
4:3
WB
AUTO
WBWBWB
AUTOAUTOAUTO
P
WB Auto
AUTOAUTO
S-IS AUTOS-IS AUTO
FHD
F
250250 F5.6
P
i
Recommended ISO
NORM
ISO
AUTO
AUTO
WB
AUTO
4:3
01:02:0301:02:03
10231023
Cursor
105
EN
Menu functions (Custom menus)
4
Adding information displays
MENU c U [ G/Info Settings]
LV-Info (Shooting information displays)
Use [LV-Info] to add the following shooting information displays. The added displays are
displayed by repeatedly pressing the INFO button during shooting. You can also choose to
not show displays that appear at the default setting.
Highlight & Shadow display
L
N
01:02:0301:02:03
3838
250250 F5.6
P
0.00.0
ISO
200
HD
Highlight & Shadow display
Areas above the upper limit of brightness for the image are shown in red, those below the
lower limit in blue. g [Histogram Settings] (P. 90 )
q Info (Playback information displays)
Use [q Info] to add the following playback information displays. The added displays are
displayed by repeatedly pressing the INFO button during playback. You can also choose to
not show displays that appear at the default setting.
Highlight & Shadow display Light box displayHistogram display
1615
15
Shadow
Highlight
15
×10×10
Light box display
[q Close Up Mode] in the custom menu must be set to [mode2] to show this display.
Compare two images side-by-side. You can move the selected image on the right to the
reference image on the left by pressing z.
The base image is displayed on the right. Using the control dial (P) or HI to select an
image and pressing z moves that image to the left screen. The image to be compared
to the image on the left can be selected on the right. To choose a different base image,
highlight the right frame and press z.
To zoom in, choose the image to be zoomed by using the U button, press the INFO
button, and then use FG or the control dial (P) to change the zoom ratio.
• Use FGHI to view other areas of the picture. The image to be zoomed changes each
time U is pressed.
2x
2x
53 54
2x
U UU
106
EN
Menu functions (Custom menus)
4
G Settings (Index/calendar display)
You can add an index display with a different number of frames and calendar display
using [G Settings]. The additional screens are displayed by pressing the G button
during playback.
z
z
G
U
G
U
G
U
My Clips playback*
1
c 11:24 MOV FHD
c 12:12 MOV FHD
2016.04.01
c 11:23 MOV FHD
12:30
G
U
Index display
Single-frame
playback
2016.04.01 12:30 20
100-0020
L
N
Wi-Fi
4 frames
2016.04.01 12:30 20
9–100 frames
2016.04.01 12:30 20
2016.04.01 12:30 20
Calendar display
2016.4
Sun Mon Tue Wed Thu Fri Sat
27 28 29 30 31 1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
1 2 3 4 5 6 7
27 28 29 30 31 1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
1 2 3 4 5 6 7
*
1
If one or more My Clips have been created, it will be displayed here (P. 39).
Shutter speeds when the ash res automatically
MENU c W [ # X-Sync.] [# Slow Limit]
You can set shutter speed conditions for when the ash res.
Shooting
mode
Flash timing (synchronous) Upper limit Lower limit
P
The slower of 1/(lens focal length×2) and
the [# X-Sync.] settings
[# X-Sync.]
setting*
[# Slow Limit]
setting
A
S
The set shutter speed No lower limit
M
* 1/200 seconds when using a separately sold external ash.
Combinations of movie image sizes and compression rates
MENU c X [ K Set]
You can set the JPEG image quality by combining image size and compression rate.
Image size Compression rate
Application
Name Pixel count
SF
(Super Fine)
F
(Fine)
N
(Normal)
B
(Basic)
Y (Large)
4608×3456*
YSF YF* YN* YB
Select for the
print size
X (Middle)
3200×2400*
XSF XF XN* XB
2560×1920
1920×1440
1600×1200
W (Small)
1280×960*
WSF WF WN* WB
For small
prints and use
on a website
1024×768
640×480
* Default
107
EN
Menu functions (Accessory port menus)
4
Accessory Port Menu
Using OLYMPUS PENPAL
The optional OLYMPUS PENPAL can be used to upload pictures to, and receive
pictures from, Bluetooth devices or other cameras connected to an OLYMPUS
PENPAL. Visit the OLYMPUS website for more information on Bluetooth devices.
Display the # Accessory Port Menu in advance (P. 87).
Sending images
Resize and upload JPEG images to another device. Before sending images, make
sure that the receiving device is set to the mode for receiving data.
1
Display the picture you wish to send full frame and
press z.
2
Select [Send A Picture] and press z.
Select [Search] and press z in the next dialog. The
camera searches for and displays Bluetooth devices
in range.
3
Select the destination and press z.
The image will be uploaded to the receiving device.
If prompted to provide a PIN code, enter 0000 and
press z.
JPEG
Send A Picture
Back Set
z
Erase
Sending
Cancel
Send Picture
Receiving images/adding a host
Connect to the transmitting device and download JPEG images.
1
Select [AOLYMPUS PENPAL Share] in
# Accessory Port Menu (P. 107).
2
Select [Please Wait] and press z.
Perform operations for sending images on the sending
device.
Transmission will start and a [Receive Picture Request]
dialog will be displayed.
1
2
#
c
Accessory Port Menu
OLYMPUS PENPAL Share
OLYMPUS PENPAL Album
Electronic Viewfinder
Back Set
3
Select [Accept] and press z.
The image will be downloaded to the camera.
If prompted to provide a PIN code, enter 0000 and
press z.
Receiving
Receive Picture
Cancel
108
EN
Menu functions (Accessory port menus)
4
Editing the address book
The OLYMPUS PENPAL can store host information. You can assign names to hosts or
delete host information.
1
Select [AOLYMPUS PENPAL Share] in
# Accessory Port Menu (P. 107).
2
Select [Address Book] and press z.
3
Select [Address List] and press z.
The names of existing hosts are listed.
1
A. OLYMPUS PENPAL Share
Please Wait
My OLYMPUS PENPAL
Picture Send Size
Address Book
Back Set
4
Select the host you wish to edit and press z.
Deleting hosts
Select [Yes] and press z.
Editing host information
Press z to display host information. To change the host name, press z again and
edit the current name in the rename dialog.
Creating albums
Your favorite JPEG pictures can be resized and copied to an OLYMPUS PENPAL.
1
Display the picture you wish to copy full frame and
press z.
2
Select [z] and press z.
To copy images from an OLYMPUS PENPAL to the
memory card, select [y] and press z.
JPEG
Back Set
z
Send A Picture
Erase
The OLYMPUS PENPAL can be used only in the region in which it was purchased.
Depending on the areas, the usage may infringe the wave regulations and may be subject
to its penalty.
A OLYMPUS PENPAL Share
Option Description
g
Please Wait Receive images and add hosts to the address book. 107
Address Book [Address List]: View the hosts that have been saved to the
address book.
[New Pairing]: Add a host to the address book.
[Search Timer]: Choose how long the camera searches for a
host.
108
MENU
#
A
109
EN
Menu functions (Accessory port menus)
4
Option Description
g
My OLYMPUS
PENPAL
Display information for your OLYMPUS PENPAL, including
the name, address, and supported services. Press z to
edit the device name.
Picture Send Size Choose the size at which images are transmitted.
[Size 1: Small]: Images are sent at a size equivalent to
640 × 480.
[Size 2: Large]: Images are sent at a size equivalent to
1920 × 1440.
[Size 3: Medium]: Images are sent at a size equivalent to
1280 × 960.
107
B OLYMPUS PENPAL Album
Option Description
g
Copy All All images and sound les are copied between the SD card
and OLYMPUS PENPAL. Copied images are resized
according to the option selected for picture copy size.
Temporarily saved les for PHOTO STORY cannot be
copied.
108
Reset Protect Remove protection from all pictures in the OLYMPUS
PENPAL album.
108
Album Mem. Usage Show the number of pictures currently in the album and the
number of additional pictures that can be stored at [Size 2:
Medium].
108
Album Mem. Setup [All Erase]: Delete all pictures in the album.
[Format Album]: Format the album.
108
Picture Copy Size Choose the size at which images are copied.
[Size 1: Large]: Copied images are not resized.
[Size 2: Medium]: Images are copied at a size equivalent to
1920 × 1440.
108
C Electronic View nder
Option Description
g
EVF Adjust Adjust the brightness and the
color temperature of optional
external view nders. The
selected color temperature is
also used in the monitor during
playback. Use HI to select
color temperature (j) or
brightness (k) and use FG
to choose from values between
[+7] and [–7].
EVF Adjust
Back Set
-
5
j
+2
k
EVF Auto Switch Sets whether to automatically switch the display away from
the monitor when using the VF-4 external electronic
view nder.
When set to [Off], pressing the u button on the external
view nder switches the display between the view nder and
the monitor. When set to [On], the display automatically
switches to VF-4 when you look through it. Automatic
switching is disabled while the monitor is pulled out.
MENU
#
B
MENU
#
C
A OLYMPUS PENPAL Share
MENU
#
A
110
EN
Connecting the camera to a smartphone
5
5
By connecting to a smartphone through this camera’s wireless LAN function and using
the speci ed app, you can enjoy even more features during and after shooting.
Things you can do with the speci ed app, OLYMPUS Image Share (OI.Share)
Camera image transfer to a smartphone
You can load images in the camera to a smartphone.
Remote shooting from a smartphone
You can remotely operate the camera and shoot using a smartphone.
Beautiful image processing
You can apply art lters and add stamps on images loaded to a smartphone.
Addition of GPS tags to camera images
You can add GPS tags to images simply by transferring the GPS log saved on the
smartphone to the camera.
For details, visit the address below:
http://oishare.olympus-imaging.com/
Before using the wireless LAN function, read “Using the wireless LAN function” (P. 150) .
If using the wireless LAN function in a country outside the region where the camera was
purchased, there is a risk that the camera will not conform to the wireless communication
regulations of that country. Olympus will not be held responsible for any failure to meet
such regulations.
As with any wireless communication, there is always a risk of interception by a third party.
The wireless LAN function on the camera cannot be used to connect to a home or public
access point.
The wireless LAN antenna is contained in the camera grip. Keep the antenna away from
metal objects whenever possible.
During wireless LAN connection, the battery will run down faster. If the battery is running
low, the connection may be lost during a transfer.
Connection may be dif cult or slow in proximity to devices that generate magnetic elds,
static electricity or radio waves, such as near microwaves, cordless telephone.
Connecting the camera to a
smartphone
111
EN
Connecting the camera to a smartphone
5
Connecting to a smartphone
Connect to a smartphone. Start the OI.Share App installed on your smartphone.
1
Select [Connection to Smartphone] in the q Playback Menu and press
z.
You can also connect by touching w in the monitor.
2
Following the guide displayed on the monitor, proceed with the Wi-Fi
settings.
The SSID, password and QR code are displayed on the monitor.
QR code
SSID
Password
Preparing Wi-Fi Connection
Connecting to your
smartphone.
Read QR code by
'OLYMPUS Image Share'.
End Wi-Fi
SSID :
E-PL8-P-00000001
Password : 11223344
3/3
3
Start OI.Share on your smartphone, and read the QR code displayed on
the camera monitor.
Connection will be performed automatically.
When you connect to your smartphone, the time and date on the camera will be
matched to the time on your smartphone.
If you are unable to read the QR code, enter the SSID and password in the Wi-Fi
settings of your smartphone to connect. For how to access the Wi-Fi settings on your
smartphone, please see your smartphone operating instructions.
4
To end the connection, press MENU on the camera or touch [End Wi-Fi]
on the monitor screen.
You can also end the connection with OI.Share or by turning off your camera.
The connection ends.
112
EN
Connecting the camera to a smartphone
5
Transferring images to a smartphone
You can select images in the camera and load them to a smartphone. You can also
use the camera to select images you want to share in advance. g “Setting a transfer
order on images (Share Order)” (P. 70)
1
Connect the camera to a smartphone (P. 110).
You can also connect by touching w in the
monitor.
250250 F5.6
01:02:0301:02:03
3030
ISO-A
200
Wi-Fi
Wi-Fi
2
Launch OI.Share and tap the Image Transfer button.
The images in the camera are displayed in a list.
3
Select the pictures you want to transfer and tap the Save button.
When saving is completed, you can turn off the camera from the smartphone.
Shooting remotely with a smartphone
You can shoot remotely by operating the camera with a smartphone.
This is available only in [Private].
1
Start [Connection to Smartphone] on the camera.
You can also connect by touching w in the monitor.
2
Launch OI.Share and tap the Remote button.
3
Tap the shutter button to shoot.
The image taken is saved on the memory card in the camera.
Available shooting options are partially limited.
113
EN
Connecting the camera to a smartphone
5
Adding position information to images
You can add GPS tags to images that were taken while the GPS log was saving by
transferring the GPS log saved on the smartphone to the camera.
This is available only in [Private].
1
Before beginning to shoot, launch OI.Share and turn on the switch on the
Add Location button to begin saving the GPS log.
Before beginning to save the GPS log, the camera must be connected to OI.Share
once to synchronize the time.
You can use the phone or other apps while the GPS log is saving. Do not terminate
OI.Share.
2
When shooting is complete, turn off the switch on the Add Location
button. Saving the GPS log is complete.
3
Start [Connection to Smartphone] on the camera.
You can also connect by touching w in the monitor.
4
Transfer the saved GPS log to the camera using OI.Share.
GPS tags are added to the images in the memory card based on the transferred GPS
log.
g is displayed on images to which position information has been added.
Addition of location information can only be used with smartphones that have a GPS
function.
Position information cannot be added to movies.
114
EN
Connecting the camera to a smartphone
5
Changing the connection method
There are two ways to connect to a smartphone. With [Private] the same settings are
used to connect every time. With [One-Time] different settings are used each time. You
may nd it convenient to use [Private] when connecting to your own smartphone and
[One-Time] when transferring images to a friend’s smartphone etc.
The default setting is [Private].
1
Select [Wi-Fi Settings] in the d Setup Menu and press z.
2
Select [Wi-Fi Connect Settings] and press I.
3
Select the wireless LAN connection method and press z.
[Private]: Connect to one smartphone (connects automatically using the settings after
the initial connection).
[One-Time]: Connect to multiple smartphones (connects using different connection
settings each time). Only image transfer function is available. You can view only
images that are set for share order using the camera.
[Select]: Select which method to use each time.
[Off]: The Wi-Fi function is turned off.
Changing the password
Change the password used for [Private].
1
Select [Wi-Fi Settings] in the d Setup Menu and press z.
2
Select [Private Password] and press I.
3
Follow the operation guide and press the R button.
A new password will be set.
115
EN
Connecting the camera to a smartphone
5
Cancelling a share order
Cancel share orders that are set on images.
1
Select [Wi-Fi Settings] in the d Setup Menu and press z.
2
Select [Reset share Order] and press I.
3
Select [Yes] and press z.
Initializing wireless LAN settings
Initializes content of [Wi-Fi Settings].
1
Select [Wi-Fi Settings] in the d Setup Menu and press z.
2
Select [Reset Wi-Fi Settings] and press I.
3
Select [Yes] and press z.
116
EN
Connecting the camera to a computer and a printer
6
6
116
EN
Connecting the camera to a computer
and a printer
Connecting the camera to a computer
Multi-connector
Smaller terminal
USB cable
Look for this
mark.
USB port
If nothing is displayed on the camera screen even after connecting the camera to the
computer, the battery may be exhausted. Use a full-charged battery.
When the camera is turned on, a dialog should be displayed in the monitor prompting
you to choose a host. If it is not, select [Auto] for [USB Mode] (P. 91 ) in the camera
custom menus.
Copying pictures to a computer
The following operating systems are compatible with the USB connection:
Windows: Windows Vista SP2/Windows 7 SP1/Windows 8/
Windows 8.1/Windows 10
Macintosh: Mac OS X v10.8 - v10.11
1
Turn the camera off and connect it to the computer.
The location of the USB port varies with the computer. For details, refer to your
computer’s manual.
2
Turn on the camera.
The selection screen for the USB connection is
displayed.
3
Press FG to select [Storage]. Press z.
USB
MTP
Storage
Print
Set
Exit
4
The computer recognizes the camera as a new device.
117
EN
Connecting the camera to a computer and a printer
6
Select [MTP] in Step 3 to use Windows Photo Gallery.
Data transfer is not guaranteed in the following environments, even if your computer is
equipped with a USB port.
Computers with a USB port added by means of an extension card, etc.
Computers without a factory-installed OS
Home-built computers
Camera controls cannot be used while the camera is connected to a computer.
If the dialog shown in Step 2 is not displayed when the camera is connected to a
computer, select [Auto] for [USB Mode] (P. 91 ) in the camera custom menus.
Installing the PC software
OLYMPUS Viewer 3 is software for importing to your computer, and then viewing,
editing and managing the photographs and movies you have shot on your camera.
You can also download OLYMPUS Viewer 3 from “http://support.olympus-imaging.com/
ov3download/”. You must enter the product’s serial number to download OLYMPUS
Viewer 3.
Windows
1
Insert the supplied CD-ROM in a CD-ROM drive.
An Autorun dialog will be displayed. Click “OLYMPUS
Setup” to display the “Setup” dialog.
If the “Setup” dialog is not displayed, open CD-ROM (OLYMPUS Setup) in Windows
Explorer and double-click “LAUNCHER.EXE”.
If a “User Account Control” dialog is displayed, click “Yes” or “Continue”.
2
Connect the camera to your computer.
When the camera is connected to another device via USB, a message will be
displayed prompting you to choose a connection type. Select [Storage].
3
Register your Olympus product.
Click the “Registration” button and follow the on-screen instructions.
118
EN
Connecting the camera to a computer and a printer
6
4
Install OLYMPUS Viewer 3.
Check the system requirements before beginning installation.
Operating Environment
Operating
System
Windows Vista SP2/Windows 7 SP1/Windows 8/Windows 8.1/
Windows 10
Processor Core2Duo 2.13 GHz or better required
RAM 2 GB or more
Free Hard
Drive Space
3 GB or more
Monitor
Settings
1024 × 768 pixels or more
Minimum 65,536 colors (16,770,000 colors recommended)
Click the “OLYMPUS Viewer 3” button and follow the on-screen instructions to install
the software.
For details on how to use the software, please see the help function in the software.
The foregoing are the minimum system requirements. Some settings may require
better specs. See the README for details.
Macintosh
1
Insert the supplied CD-ROM in a CD-ROM drive.
The disk contents should automatically be displayed
in the Finder. If they are not, double-click the CD-ROM
icon on the desktop.
Double-click the “Setup” icon to display the “Setup”
dialog.
2
Install OLYMPUS Viewer 3.
Check the system requirements before beginning
installation.
Click the “OLYMPUS Viewer 3” button and follow the
on-screen instructions to install the software.
Operating Environment
Operating
System
Mac OS X v10.8–v10.11
Processor Core2Duo 2 GHz or better required
RAM 2 GB or more
Free Hard
Drive Space
3 GB or more
Monitor
Settings
1024 × 768 pixels or more
Minimum 32,000 colors (16,770,000 colors recommended)
To change language, select the language you wish to use from the language combo
box. For details on how to use the software, please see the help function in the
software.
The foregoing are the minimum system requirements. Some settings may require
better specs. See the README for details.
119
EN
Connecting the camera to a computer and a printer
6
Direct printing (PictBridge)
By connecting the camera to a PictBridge-compatible printer with the USB cable, you
can print out recorded pictures directly.
1
Connect the camera to the printer using the supplied USB cable and turn
the camera on.
Multi-connector
Smaller terminal
USB cable
Look for this
mark.
USB port
Use a fully charged battery for printing.
When the camera is turned on, a dialog should be displayed in the monitor prompting
you to choose a host. If it is not, select [Auto] for [USB Mode] (P. 91 ) in the camera
custom menus.
2
Use FG to select [Print].
[One Moment] will be displayed, followed by a print-
mode selection dialog.
If the screen is not displayed after a few minutes,
disconnect the USB cable and start again from Step 1.
USB
MTP
Storage
Print
Set
Exit
Proceed to “Custom printing” (P. 120) .
3D photos, RAW images, and movies cannot be printed.
Easy printing
Use the camera to display the picture you wish to print before connecting the printer
via the USB cable.
1
Use HI to display the pictures you want to print
on the camera.
2
Press I.
The picture selection screen appears when printing is
completed. To print another picture, use HI to select
the image and press z.
To exit, unplug the USB cable from the camera while the
picture selection screen is displayed.
PC/Custom Print
Easy Print Start
120
EN
Connecting the camera to a computer and a printer
6
Custom printing
1
Connect the camera to the printer using the supplied USB cable and turn the
camera on.
When the camera is turned on, a dialog should be displayed in the monitor prompting
you to choose a host. If it is not, select [Auto] for [USB Mode] (P. 91 ) in the camera
custom menus.
2
Follow the operation guide to set a print option.
Selecting the print mode
Select the type of printing (print mode). The available print modes are as shown below.
Print Prints selected pictures.
All Print
Prints all the pictures stored in the card and makes one print for
each picture.
Multi Print
Prints multiple copies of one image in separate frames on a single
sheet.
All Index Prints an index of all the pictures stored in the card.
Print Order
Prints according to the print reservation you made. If there is no
picture with print reservation, this is not available.
Setting the print paper items
This setting varies with the type of printer. If only the printer’s STANDARD setting is
available, you cannot change the setting.
Size Sets the paper size that the printer supports.
Borderless
Selects whether the picture is printed on the entire page or inside a
blank frame.
Pics/Sheet
Selects the number of pictures per sheet. Displayed when you have
selected [Multi Print].
Selecting pictures you want to print
Select pictures you want to print. The selected pictures can
be printed later (single-frame reservation) or the picture
you are displaying can be printed right away.
Single Print More
Select Print
15
123-3456
Print (f)
Prints the currently displayed picture. If there is a picture that [Single
Print] reservation has already been applied to, only that reserved
picture will be printed.
Single Print
(t)
Applies print reservation to the currently displayed picture. If you
want to apply reservation to other pictures after applying [Single
Print], use HI to select them.
More (u)
Sets the number of prints and other items for the currently displayed
picture, and whether or not to print it. For operation, refer to “Setting
printing data” in the next section.
121
EN
Connecting the camera to a computer and a printer
6
Setting printing data
Select whether to print printing data such as the date and time or le name on the picture
when printing. When the print mode is set to [All Print] and [Option Set] is selected, the
following options appears.
<×
Sets the number of prints.
Date Prints the date and time recorded on the picture.
File Name Prints the le name recorded on the picture.
P
Trims the picture for printing. Use the control dial (P) to choose the
crop size and FGHI to specify the crop position.
3
Once you have set the pictures for printing and printing data, select [Print],
then press z.
To stop and cancel printing, press z. To resume printing, select [Continue].
Cancelling printing
To cancel printing, highlight [Cancel] and press z. Note that any changes to the print order
will be lost; to cancel printing and return to the previous step, where you can make changes
to the current print order, press MENU.
Print reservation (DPOF)
You can save digital “print orders” to the memory card listing the pictures to be printed
and the number of copies of each print. You can then have the pictures printed at a
print shop that supports DPOF or print the pictures yourself by connecting the camera
directly to a DPOF printer. A memory card is required when creating a print order.
Creating a print order
1
Press z during playback and select [<].
2
Select [<] or [
U
] and press z.
Individual picture
Press HI to select the frame that you want to set as print
reservation, then press FG to set the number of prints.
To set print reservation for several pictures, repeat this
step. Press z when all the desired pictures have been
selected.
<
ALL
Print Order
Back
Set
All pictures
Select [U] and press z.
122
EN
Connecting the camera to a computer and a printer
6
3
Select the date and time format and press z.
No
The pictures are printed without the date
and time.
Date
The pictures are printed with the shooting
date.
Time
The pictures are printed with the shooting
time.
When printing images, the setting cannot be changed between the images.
4
Select [Set] and press z.
The camera cannot be used to modify print orders created with other devices. Creating a
new print order deletes any existing print orders created with other devices.
Print orders cannot include 3D photos, RAW images, or movies.
Removing all or selected pictures from the print order
You can reset all print reservation data or just the data for selected pictures.
1
Press z during playback and select [<].
2
Select [<] and press z.
To remove all pictures from the print order, select [Reset] and press z. To exit
without removing all pictures, select [Keep] and press z.
3
Press HI to select images you wish to remove from the print order.
• Use G to set the number of prints to 0. Press z once you have removed all the
desired pictures from the print order.
4
Select the date and time format and press z.
This setting is applied to all frames with print reservation data.
5
Select [Set] and press z.
No
Date
Time
X
Back Set
123
EN
Cautions
7
7
Battery and charger
The camera uses a single Olympus lithium-ion battery. Never use any battery other than
genuine OLYMPUS batteries.
The camera’s power consumption varies widely with usage and other conditions.
As the following consume a lot of power even without shooting, the battery will be drained
quickly.
Performing auto focus repeatedly by pressing the shutter button halfway in shooting
mode.
Displaying images on the monitor for a prolonged period.
When [Release Lag-Time] (P. 89 ) is set to [Short].
When connected to a computer or printer.
When using a drained battery, the camera may turn off without the low battery warning
being displayed.
The battery will not be fully charged at the time of purchase. Charge the battery using the
provided charger before use.
The normal charging time using the provided charger is approximately 3 hours 30 minutes
(estimated).
Do not attempt to use chargers not speci cally designated for use with the supplied
battery, or to use batteries not speci cally designated for use with the supplied charger.
There is a risk of explosion if the battery is replaced with the incorrect battery type.
Dispose of the used battery following the instructions “
CAUTION” (P. 149).
Using your charger abroad
The charger can be used in most home electrical sources within the range of 100 V to
240 V AC (50/60 Hz) around the world. However, depending on the country or area you
are in, the AC wall outlet may be shaped differently and the charger may require a plug
adapter to match the wall outlet. For details, ask at your local electrical shop or travel
agent.
Do not use commercially available travel adapters as the charger may malfunction.
Cautions
124
EN
Cautions
7
Usable cards
In this manual, all storage devices are referred to as “cards.” The
following types of SD memory card (commercially available) can be
used with this camera: SD, SDHC, SDXC, and Eye-Fi. For the latest
information, please visit the Olympus website.
SD card write protect switch
The SD card body has a write protect switch. If you set the switch to
the “LOCK” side, you will not be able to write to the card, delete data or
format. Return the switch to the unlock position enable writing.
LOCK
The data in the card will not be erased completely even after formatting the card or
deleting the data. When discarding, destroy the card to prevent leakage of personal
information.
Use the Eye-Fi card in compliance with the laws and regulations of the country where the
camera is used. Remove the Eye-Fi card from the camera or disable the card functions in
airplanes and other locations where use is prohibited. g [Eye-Fi] (P. 96 )
The Eye-Fi card may become hot during use.
When using an Eye-Fi card, the battery may run out faster.
When using an Eye-Fi card, the camera may function more slowly.
Failure may occur during My Clips shooting. Please turn off the card function in this case.
Setting the SD card’s write protect switch to the “LOCK” position will restrict some
functions such as clips shooting and playback.
125
EN
Cautions
7
Record mode and le size/number of storable still pictures
The le size in the table is approximate for les with a 4:3 aspect ratio.
Record
mode
Number of pixels
(Pixel Count)
Compression
File
format
File size
(MB)
Number of
storable still
pictures*
RAW
4608×3456
Loss-less compression ORF Approx. 17.3 428
YSF
1/2.7
JPEG
Approx. 10.8 637
YF
1/4 Approx. 7.5 917
YN
1/8 Approx. 3.5 1984
YB
1/12 Approx. 2.4 2941
XSF
3200×2400
1/2.7 Approx. 5.6 1245
XF
1/4 Approx. 3.4 2051
XN
1/8 Approx. 1.7 4068
XB
1/12 Approx. 1.2 5954
XSF
2560×1920
1/2.7 Approx. 3.2 2160
XF
1/4 Approx. 2.2 3170
XN
1/8 Approx. 1.1 6259
XB
1/12 Approx. 0.8 9041
XSF
1920×1440
1/2.7 Approx. 1.8 3814
XF
1/4 Approx. 1.2 5548
XN
1/8 Approx. 0.6 10614
XB
1/12 Approx. 0.4 15258
XSF
1600×1200
1/2.7 Approx. 1.3 5425
XF
1/4 Approx. 0.9 7875
XN
1/8 Approx. 0.5 15258
XB
1/12 Approx. 0.4 20344
WSF
1280×960
1/2.7 Approx. 0.9 8137
WF
1/4 Approx. 0.6 11625
WN
1/8 Approx. 0.3 22193
WB
1/12 Approx. 0.3 30516
WSF
1024×768
1/2.7 Approx. 0.6 12206
WF
1/4 Approx. 0.4 17438
WN
1/8
Approx. 0.3 30516
WB
1/12 Approx. 0.2 40688
WSF
640×480
1/2.7 Approx. 0.3 27125
WF
1/4 Approx. 0.2 40688
WN
1/8 Approx. 0.2 61033
WB
1/12 Approx. 0.1 81377
*Assumes a 8GB SD card.
The number of storable still pictures may change according to the subject, whether or not
print reservations have been made, and other factors. In certain instances, the number
of storable still pictures displayed on the monitor will not change even when you take
pictures or erase stored images.
• The actual le size varies according to the subject.
The maximum number of storable still pictures displayed on the monitor is 9999.
For the available recording time for movies, see the Olympus website.
126
EN
Cautions
7
Interchangeable lenses
Choose a lens according to the scene and your creative intent. Use
lenses designed exclusively for the Micro Four Thirds system and
bearing the M.ZUIKO DIGITAL label or the symbol shown at right.
With an adapter, you can also use Four Thirds System and OM System
lenses.
When you attach or remove the body cap and lens from the camera, keep the lens mount
on the camera pointed downward. This helps prevent dust and other foreign matter from
getting inside the camera.
Do not remove the body cap or attach the lens in dusty places.
Do not point the lens attached to the camera toward the sun. This may cause the camera
to malfunction or even ignite due to the magnifying effect of sunlight focusing through the
lens.
Be careful not to lose the body cap and rear cap.
Attach the body cap to the camera to prevent dust from getting inside when no lens is
attached.
Lens and camera combinations
Lens Camera Attachment AF Metering
Micro Four Thirds
system lens
Micro Four Thirds
system camera
Yes Ye s Ye s
Four Thirds system
lens
Attachment
possible with
mount adapter
Yes*
1
Yes
OM System lenses No Yes*
2
Micro Four Thirds
system lens
Four Thirds System
Camera
No No No
*1 AF is not operational when recording movies.
*2 Accurate metering is not possible.
127
EN
Cautions
7
External ash units designated for use with this camera
With this camera, you can use one of the separately sold external ash units to
achieve a ash suited to your needs. The external ashes communicate with the
camera, allowing you to control the camera’s ash modes with various available ash
control modes, such as TTL-AUTO and Super FP ash. An external ash unit speci ed
for use with this camera can be mounted on the camera by attaching it to the camera’s
hot shoe. You can also attach the ash to the ash bracket on the camera using the
bracket cable (optional). Refer to the documentation provided with the external ash
units as well.
The upper limit of the shutter speed is 1/200 sec. when using a ash.
Functions available with external ash units
Optional ash Flash control mode GN (Guide number) (ISO100) RC mode
FL-600R
TTL-AUTO, AUTO, MANUAL,
FP TTL AUTO, FP MANUAL
GN36 (85 mm*
1
) GN20 (24 mm*
1
)
FL-300R TTL-AUTO, MANUAL GN20 (28 mm*
1
)
FL-14 TTL-AUTO, AUTO, MANUAL GN14 (28 mm*
1
) –
RF-11
TTL-AUTO, MANUAL
GN11
TF-22 GN22
*1 The focal length of the lens that can be used (Calculated based on 35 mm lm camera).
Wireless remote control ash photography
External ash units that are designated for use with this camera and have a remote
control mode can be used for wireless ash photography. The camera can separately
control each of three groups of remote ash units, and the internal ash. See the
instruction manuals provided with the external ash units for details.
1
Set the remote ash units to RC mode and place them as desired.
Turn the external ash units on, press the MODE button, and select RC mode.
Select a channel and group for each external ash unit.
2
Select [On] for [# RC Mode] in X Shooting Menu 2 (P. 73 ).
The LV super control panel switches to RC mode.
You can choose an LV super control panel display by repeatedly pressing the INFO
button.
• Select a ash mode (note that red-eye reduction is not available in RC mode).
128
EN
Cautions
7
3
Adjust the settings for each group in the LV super control panel.
250250 F5.6
P
3838
A Mode
TTL
M
Off
+5.0
TTL +3.0
1/8
LO
1
Ch
Flash intensity value
Group
• Select the ash control
mode and adjust the ash
intensity separately for
each group. For MANUAL,
select the ash intensity.
Normal ash/Super FP ash
• Switch between normal
ash and Super FP ash.
Communication light level
• Set the communication
light level to [HI], [MID],
or [LO].
Channel
• Set the communication
channel to the same
channel used on the ash.
Flash intensityFlash control
mode
Adjust settings for the camera
ash unit.
4
Attach the supplied ash unit and raise the ash head.
• After con rming that the built-in and remote ash units have charged, take a test shot.
Wireless ash control range
Position the wireless ash units with their
remote sensors facing the camera. The
following illustration shows the approximate
ranges at which the ash units can be
positioned. The actual control range varies
with local conditions.
7m
5m
100°100°
50°
50°
50°
50°
60°
60°
30°
30°
30°
30°
We recommend using a single group of up to three remote ash units.
• Remote ash units cannot be used for second curtain slow synchronization or anti-shock
exposures longer than 4 seconds.
If the subject is too close to the camera, the control ashes emitted by the camera ash
may affect exposure (this effect can be reduced by reducing the output of the camera
ash by, for example, using a diffuser).
The upper limit of ash synchronization timing is 1/160 sec. when using the ash in RC
mode.
Other external ash units
Note the following when using a third-party ash unit mounted on the camera hot shoe:
• Using obsolete ash units that apply currents of more than about 24 V to the X-contact will
damage the camera.
• Connecting ash units with signal contacts that do not conform to Olympus speci cations
may damage the camera.
Set the Shooting mode to M, set the shutter speed to a value no higher than ash
synchronous speed, and set ISO sensitivity to a setting other than [AUTO].
Flash control can only be performed by manually setting the ash to the ISO sensitivity
and aperture values selected with the camera. Flash brightness can be adjusted by
adjusting either ISO sensitivity or aperture.
• Use a ash with an angle of illumination suited to the lens. Angle of illumination is usually
expressed using 35-mm format equivalent focal lengths.
129
EN
Cautions
7
Electronic View nder (VF-4)
The VF-4 electronic view nder switches on automatically when you look through it.
While the view nder is on, the camera monitor display is switched off. You can select
whether to automatically switch the display between the view nder and monitor using
the menu settings. Note that menus and other settings information are still displayed
on the camera monitor when the view nder is switched on. Refer to the documentation
provided with the electronic view nder as well.
Automatic switching is disabled while the monitor is pulled out.
In the following situations, the view nder may not switch off automatically.
When in sleep mode/when shooting using movie, 3D, multiple exposure, live bulb, live
time etc./when the shutter button is pressed halfway
• The view nder may also fail to turn on automatically when viewed in certain situations,
such as when wearing glasses, or under strong sunlight. Switch manually.
Principal Accessories
Remote cable (RM–UC1)
Use when the slightest camera movement can result in blurred pictures, for example
for macro or bulb photography. The remote cable attaches via the camera multi-
connector. (P. 10)
Converter lenses
Converter lenses attach to the camera lens for quick and easy sh-eye or macro
photography. See the OLYMPUS website for information on the lenses that can be
used.
Use the appropriate lens attachment for SCN mode (f, w, or m).
Macro arm light (MAL–1)
Use to illuminate subjects for macro photography, even at ranges at which vignetting
would occur with the ash.
Microphone set (SEMA–1)
The microphone can be placed at a distance from the camera to avoid recording
ambient sounds or wind noise. Third-party commercial microphones can also be used
depending on your creative intent. We recommend that you use the supplied extension
cord. (power supplied via l3.5 mm stereo mini-plug)
130
EN
Cautions
7
Software
OLYMPUS Viewer 3
Digital Photo Managing Software
Remote Operation
RM-UC1
Remote Cable
SD/SDHC/
SDXC/Eye-Fi
Memory Card*
5
Connection Cable
USB Cable/
AV Cable/
HDMI Cable
System chart
*1 Not all lenses can be used with adapter. For details, refer to the Olympus Official Web Site. Also, please
note that manufacture of OM System Lenses has been discontinued.
*2 For compatible lens, refer to the Olympus Official Web Site.
*3 The OLYMPUS PENPAL can be used only in the region in which it was purchased. Depending on the
areas, the usage may infringe the wave regulations and may be subject to its penalty.
Power Supply
BCS-5
Li-ion Battery Charger
BLS-50
Li-ion Battery
Viewfinder
VF-1
Optical View Finder
VF-4
Electronic View Finder
Accessory port devices
MAL-1
MACRO ARM
LIGHT
OLYMPUS PENPAL PP-1
*3
Communication Unit
SEMA-1
Microphone Set 1
Case / Strap
Shoulder Strap
Camera Case
131
EN
Cautions
7
: E-PL8 compatible products
Lens
MF-2 *
1
OM Adapter 2
For the latest information, please visit the Olympus website.
M.ZUIKO DIGITAL ED 8mm f1.8 Fisheye PRO
M.ZUIKO DIGITAL ED 12mm f2.0
M.ZUIKO DIGITAL 17mm f1.8
M.ZUIKO DIGITAL 17mm f2.8
M.ZUIKO DIGITAL 25mm f1.8
M.ZUIKO DIGITAL 45mm f1.8
M.ZUIKO DIGITAL ED 60mm f2.8 Macro
M.ZUIKO DIGITAL ED 75mm f1.8
M.ZUIKO DIGITAL ED 7-14mm f2.8 PRO
M.ZUIKO DIGITAL ED 9-18mm f4.0-5.6
M.ZUIKO DIGITAL ED 12-40mm f2.8 PRO
M.ZUIKO DIGITAL ED 12-50mm f3.5-6.3 EZ
M.ZUIKO DIGITAL ED 14-42mm f3.5-5.6 EZ
M.ZUIKO DIGITAL 14-42mm f3.5-5.6 II R
M.ZUIKO DIGITAL ED 14-150mm f4.0-5.6 II
M.ZUIKO DIGITAL ED 40-150mm f4.0-5.6 R
M.ZUIKO DIGITAL ED 40-150mm f2.8 PRO
M.ZUIKO DIGITAL ED 75-300mm f4.8-6.7 II
M.ZUIKO DIGITAL ED 300mm f4.0 IS PRO
Teleconverter MC-14
*4
Converter
Lens*
2
FCON-P01
Fisheye
WCON-P01
Wide
MCON-P01
Macro
MCON-P02
Macro
MMF-2/MMF-3 *
1
Four Thirds Adapter
: Commercially available products
*4 Only available for ED 40-150mm f2.8 PRO/ED 300mm f4.0 IS PRO.
*5 Use the SD card with wireless LAN function or Eye-Fi card in compliance with the laws and regulations of
the country where the camera is used.
Flash
STF-22
Twin Flash Set
FC-1
Macro Flash Controller
FL-600R
Electronic Flash
FL-14
Electronic Flash
FL-300R
Electronic Flash
RF-11*
2
Ring Flash
TF-22 *
2
Twin Flash
SRF-11
Ring Flash Set
OM System Lenses
Four Thirds System Lenses
132
EN
Cautions
7
Cleaning and storing the camera
Cleaning the camera
Turn off the camera and remove the battery before cleaning the camera.
Exterior:
Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy water
and wring well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you
have used the camera at the beach, use a cloth soaked in clean water and well wrung.
Monitor:
Wipe gently with a soft cloth.
Lens:
Blow dust off the lens with a commercially available blower. For the lens, wipe gently with
a lens cleaning paper.
Storage
When not using the camera for a prolonged period, remove the battery and card. Store
the camera in a cool, dry place that is well ventilated.
Insert the battery periodically and test the camera’s functions.
Remove dust and other foreign matter from the body and rear caps before attaching them.
Attach the body cap to the camera to prevent dust from getting inside when no lens is
attached. Be sure to replace the front and rear lens caps before putting the lens away.
Clean the camera after use.
Do not store with insect repellent.
Cleaning and checking the image pickup device
This camera incorporates a dust reduction function to keep dust from getting on the
image pickup device and to remove any dust or dirt from the image pickup device
surface with ultrasonic vibrations. The dust reduction function operates when the
camera is turned on.
The dust reduction function operates at the same time as the pixel mapping, which
checks the image pickup device and image processing circuitry. Since dust reduction
is activated every time the camera’s power is turned on, the camera should be held
upright for the dust reduction function to be effective.
Do not use strong solvents such as benzene or alcohol, or a chemically treated cloth.
Avoid storing the camera in places where chemicals are treated, in order to protect the
camera from corrosion.
Mold may form on the lens surface if the lens is left dirty.
Check each part of the camera before use if it has not been used for a long time. Before
taking important pictures, be sure to take a test shot and check that the camera works
properly.
133
EN
Cautions
7
Pixel Mapping - Checking the image processing functions
The pixel mapping feature allows the camera to check and adjust the image pickup
device and image processing functions. After using the monitor or taking continuous
shots, wait for at least one minute before using the pixel mapping function to ensure
that it operates correctly.
1
Select [Pixel Mapping] in c Custom Menu (P. 96 ) tab b.
2
Press I, then press z.
The [Busy] bar is displayed when pixel mapping is in progress. When pixel mapping
is nished, the menu is restored.
If you accidentally turn the camera off during pixel mapping, start again from Step 1.
134
EN
Information
8
8
Shooting tips and information
The camera does not turn on even when a battery is loaded
The battery is not fully charged
Charge the battery with the charger.
The battery is temporarily unable to function because of the cold
Battery performance drops at low temperatures. Remove the battery and warm it by
putting it in your pocket for a while.
No picture is taken when the shutter button is pressed
The camera has turned off automatically
The camera automatically enters sleep mode to reduce the drain on the battery if no
operations are performed for a set period of time. g [Sleep] (P. 91 )
If no operations are performed for a set time (about 5 minutes) after the camera has
entered sleep mode, the camera will turn off automatically.
The ash is charging
On the monitor, the # mark blinks when charging is in progress. Wait for the blinking to
stop, then press the shutter button.
Unable to focus
The camera cannot focus on subjects that are too close to the camera or that are not
suited to autofocus (the AF con rmation mark will blink in the monitor). Increase the
distance to the subject or focus on a high contrast object at the same distance from the
camera as your main subject, compose the shot, and shoot.
Subjects that are dif cult to focus on
It may be dif cult to focus with auto focus in the following situations.
AF con rmation
mark is blinking.
These subjects
are not focused.
Subject with low
contrast
Excessively bright
light in center of
frame
Subject containing no
vertical lines
AF con rmation
mark lights up but
the subject is not
focused.
Subjects at different
distances
Fast-moving subject Subject not inside
AF area
Information
135
EN
Information
8
Noise reduction is activated
When shooting night scenes, shutter speeds are slower and noise tends to appear in
images. The camera activates the noise-reduction process after shooting at slow shutter
speeds. During which, shooting is not allowed. You can set [Noise Reduct.] to [Off].
g [Noise Reduct.] (P. 91 )
The number of AF targets is reduced
The number and size of AF targets varies with group target settings and the option selected
for [Digital Tele-converter] and [Image Aspect].
The date and time has not been set
The camera is used with the settings at the time of purchase
The date and time of the camera is not set when purchased. Set the date and time before
using the camera. g “Setting the date/time” (P. 17)
The battery has been removed from the camera
The date and time settings will be returned to the factory default settings if the camera is
left without the battery for approximately 1 day. The settings will be cancelled more quickly
if the battery was only loaded in the camera for a short time before being removed. Before
taking important pictures, check that the date and time settings are correct.
Set functions are restored to their factory default settings
When you rotate the mode dial or turn off the power in a shooting mode other than P, A,
S, or M, functions with changes made to their settings are restored to the factory default
settings.
Image taken appears whitish
This may occur when the picture is taken in backlight or semi-backlight conditions. This is
due to a phenomenon called are or ghosting. As far as possible, consider a composition
where strong light source is not taken in the picture. Flare may occur even when a light
source is not present in the picture. Use a lens hood to shade the lens from the light source.
If a lens hood does not have effect, use your hand to shade the lens from the light.
g “Interchangeable lenses” (P. 126)
Unknown bright dot(s) appear on the subject in the picture taken
This may be due to stuck pixel(s) on the image pickup device. Perform [Pixel Mapping].
If the problem persists, repeat pixel mapping a few times. g “Pixel Mapping - Checking the
image processing functions” (P. 133)
Functions that cannot be selected from menus
Some items may not be selectable from the menus when using the arrow pad.
Items that cannot be set with the current shooting mode.
Items that cannot be set because of an item that has already been set:
Combination of [T] and [Noise Reduct.], etc.
136
EN
Information
8
Error codes
Monitor
indication
Possible cause Corrective action
No Card
The card is not inserted, or it
cannot be recognized.
Insert a card or insert a different
card.
Card Error
There is a problem with the card.
Insert the card again. If the
problem persists, format the card.
If the card cannot be formatted, it
cannot be used.
Write Protect
Writing to the card is prohibited.
The card write-protect switch is
set to the “LOCK” side. Release
the switch. (P. 124 )
Card Full
The card is full. No more
pictures can be taken or no
more information such as print
reservation can be recorded.
There is no space in the card
and print reservation or new
images cannot be recorded.
Replace the card or erase
unwanted pictures.
Before erasing, download
important images to a PC.
Clean the contact area of
the card with a dry cloth.
Clean Card
Format
Card Setup
Set
Card cannot be read. Card may
not have been formatted.
Select [Clean Card], press
z and turn off the camera.
Remove the card and wipe the
metallic surface with a soft, dry
cloth.
• Select [Format][Yes], and then
press z to format the card.
Formatting the card erases all
data on the card.
No Picture
There are no pictures on the
card.
The card contains no pictures.
Record pictures and play back.
Picture Error
The selected picture cannot be
displayed for playback due to
a problem with this picture. Or
the picture cannot be used for
playback on this camera.
Use image processing software to
view the picture on a PC.
If that cannot be done, the image
le is damaged.
The Image Cannot
Be Edited
Pictures taken with another
camera cannot be edited on this
camera.
Use image processing software to
edit the picture.
137
EN
Information
8
Monitor
indication
Possible cause Corrective action
m
The internal temperature of
the camera has risen due to
sequential shooting.
Turn off the camera and wait for
the internal temperature to cool.
Internal camera
temperature is too
high. Please wait
for cooling before
camera use.
Wait a moment for the camera to
turn off automatically.
Allow the internal temperature
of the camera to cool before
resuming operations.
Battery Empty
The battery is drained. Charge the battery.
No Connection
The camera is not correctly
connected to a computer, printer,
HDMI display, or other device.
Reconnect the camera.
No Paper
There is no paper in the printer. Load some paper in the printer.
No Ink
The printer has run out of ink.
Replace the ink cartridge in the
printer.
Jammed
The paper is jammed. Remove the jammed paper.
Settings Changed
The printer’s paper cassette has
been removed or the printer has
been manipulated while making
settings on the camera.
Do not manipulate the printer
while making settings on the
camera.
Print Error
There is a problem with the
printer and/or camera.
Turn off camera and printer.
Check the printer and remedy any
problems before turning the power
on again.
Cannot Print
Pictures recorded on other
cameras may not be printed on
this camera.
Use a personal computer to print.
The lens is locked.
Please extend the
lens.
The lens of the retractable lens
stays retracted.
Extend the lens. (P. 15 )
Please check the
status of a lens.
An abnormality has occurred
between the camera and the
lens.
Turn off the camera, check the
connection with the lens, and turn
the power on again.
138
EN
Information
8
Menu directory
*1: Can be added to [Myset].
*2: Default can be restored by selecting [Full] for [Reset].
*3: Default can be restored by selecting [Basic] for [Reset].
K Shooting Menu
Tab Function Default *1 *2 *3
g
W
Card Setup 73
Reset/Myset
74
Picture Mode
jNatural

61
K
Still Picture
YN

56
Movie
MOVnFHD
F

57
Image Aspect 4:3

56
Digital Tele-converter Off

76
X j/Y o

54 , 77
Image Stabilizer
Still Picture S-I.S. Auto

53
Movie
Movie-I.S.
On
Bracketing
Off

78
AE BKT 3f 1.0EV
WB BKT
A – B
79
G – M
FL BKT
ISO BKT
ART BKT
HDR Off

80
Multiple
Exposure
Number of Frames Off

81 Auto Gain Off
Overlay Off
Intrvl. Sh./Time Lapse Off

82
Number of Frames 99
Start Waiting Time 00:00:01
Interval Length 00:00:01
Time Lapse Movie Off
# RC Mode
Off

127
139
EN
Information
8
q Playback Menu
Tab Function Default *1 *2 *3
g
q
m
Start
68
BGM Happy Days

Slide All

Slide Interval 3sec
Movie Interval Short
R
On

84
Edit
Sel. Image
RAW Data Edit 84
JPEG Edit 85
R
86
Image Overlay 86
Print Order 121
Reset Protect 86
Connection to Smartphone 111
d Setup Menu
Tab Function Default *1 *2 *3
g
d
X
17
W *
87
i
j ±0, k ±0, Vivid
87
Rec View 0.5sec

87
Wi-Fi
Settings
Wi-Fi Connect Settings Private
114
Private Password
Reset share Order
Reset Wi-Fi Settings
c/# Menu
Display
c Menu Display
On
87
# Menu Display
Off
Firmware 87
* Settings differ depending on the region where the camera is purchased.
140
EN
Information
8
c Custom Menu
Tab Function Default *1 *2 *3
g
cR
AF/MF
AF Mode
Still Picture S-AF

88
Movie C-AF
Full-time AF Off

AEL/AFL
S-AF mode1

C-AF mode2
MF mode1
Reset Lens On

Bulb/Time Focusing On

Focus Ring
b

MF Assist
Magnify Off

Peaking Off

P Set Home o

AF Illuminator On

I Face Priority
K

AF Area Pointer On

S
Button/Dial
Button
Function
FFunction L

98
UFunction U
RFunction
RREC
IFunction #
GFunction j/Y
nFunction
Direct Function
lFunction
AF Stop
Dial
Function
P
F

89
A
FNo.
S
Shutter
M
Shutter
q
Prev/Next
Dial Direction
Exposure Dial1

Ps Dial1
Mode Dial Function Off
T
Release/j/Image Stabilizer
Rls Priority S Off

89
Rls Priority C On

j L fps
3.5 fps

j H fps
8 fps

j Image Stabilization
On
Half Way Rls With IS On
Lens I.S. Priority Off

Release Lag-Time Normal
141
EN
Information
8
Tab Function Default *1 *2 *3
g
cU
Disp/8/PC
HDMI
HDMI Out 1080i
90
HDMI Control Off
Video Out
KControl
Settings
iAUTO Live Guide
P/A/S/M Live Control
ART Art Menu
SCN Scene Menu
G/Info
Settings
q Info
Image Only, Overall

LV-Info
Image Only, u,
Level Gauge Display

G Settings
O, Calendar display,
“My Clips” playback

Displayed Grid Off

Picture Mode Settings All On

Histogram
Settings
Highlight 255
Shadow 0
Mode Guide On
Live View Boost Off

Frame Rate Normal

Art LV Mode mode1
Flicker reduction Auto
LV Close Up Mode mode2
91
zLock
Off

qClose Up Mode
mode1
Peaking Settings White

Backlit LCD Hold

Sleep 1min

8
On

USB Mode Auto

V
Exp/p/ISO
EV Step 1/3EV

91
Noise Reduct. Auto

Noise Filter Standard

ISO Auto

ISO Step 1/3EV

ISO-Auto Set
High Limit: 1600
Default: 200

92
ISO-Auto P/A/S

Metering
p

AEL Metering Auto

Bulb/Time Timer 8min

Bulb/Time Monitor -7

Live Bulb Off

Live Time 0.5 sec

Anti-Shockz
Off (2 sec.)

Composite Settings 1 sec

142
EN
Information
8
Tab Function Default *1 *2 *3
g
cW
# Custom
# X-Sync.
1/250

92
# Slow Limit
1/60

w+F
Off

X
K/Color/WB
K Set
K1 YF, K2 YN, K3 XN,
K4 WN

93
Pixel
Count
Xiddle
3200×2400

Wmall
1280×960
Shading Comp. Off

WB Auto A : 0, G : 0

All >
All Set

All Reset
W Keep Warm Color
On

#+WB
WB AUTO

Color Space sRGB

Y
Record/Erase
Quick Erase Off

94
RAW+JPEG Erase RAW+JPEG

File Name Reset
Edit Filename Off
Priority Set No

dpi Settings 350dpi
Copyright
Settings
Copyright Info. Off
Artist Name
Copyright Name
Z
Movie
nMode
P
95
Movie R
On

Recording Volume ±0
KVolume Limiter
On
Wind Noise Reduction Off
Movie Effect On
Movie+Photo Mode mode1
b K Utility
Pixel Mapping 133
Exposure
Shift
p
±0

96
J
5
: Warning Level
±0
Level Adjust
Touch Screen Settings On
Eye-Fi On
Electronic
Zoom Speed
Still Picture Normal
Movie Normal
143
EN
Information
8
# Accessory Port Menu
Tab Function Default *1 *2 *3
g
#A
OLYMPUS PENPAL Share
Please Wait 107, 108
Address
Book
Address List
108
Search Timer 30 sec
New Pairing
My OLYMPUS PENPAL
109
Picture Send Size Size 1: Small
B
OLYMPUS PENPAL Album
Copy All
109
Reset Protect
Album Mem. Usage
Album Mem. Setup
Picture Copy Size Size 2: Medium
C
Electronic View nder
EVF Adjust
j ±0, k ±0
109
EVF Auto Switch On
144
EN
Information
8
Speci cations
Camera
Product name E-PL8
Product type
Product type Digital camera with interchangeable Micro Four Thirds Standard lens
system
Lens M.Zuiko Digital, Micro Four Thirds System Lens
Lens mount Micro Four Thirds mount
Equivalent focal length on
a 35 mm lm camera
Approx. twice the focal length of the lens
Image pickup device
Product type 4/3" Live MOS sensor
Total no. of pixels Approx. 17.2 million pixels
No. of effective pixels Approx. 16.05 million pixels
Screen size 17.3 mm (H) × 13.0 mm (V)
Aspect ratio 1.33 (4:3)
Live view
Sensor Uses Live MOS sensor
Field of view 100%
Monitor
Product type 3.0" TFT color LCD, Vari-angle, touch screen
Total no. of pixels Approx. 1,040,000 dots (aspect ratio 3 : 2)
Shutter
Product type Computerized focal-plane shutter
Shutter speed 1/4000 - 60 sec., bulb photography, time photography
Auto focus
Product type Hi-Speed Imager AF
Focusing points 81 points
Selection of focusing point Auto, Optional
Exposure control
Metering system TTL metering system (imager metering)
Digital ESP metering/Center weighted averaging metering/Spot metering
Metered range EV –2 - 20 (Equivalent to M.ZUIKO DIGITAL 17mm f2.8, ISO100)
Shooting modes
A: iAUTO/P: Program AE (Program shift can be performed)/
A: Aperture priority AE/S: Shutter priority AE/M: Manual/
J: PHOTO STORY/ART: Art lter/SCN: Scene/
n
: Movie
ISO sensitivity LOW, 200 - 25600 (1/3, 1 EV step)
Exposure compensation ±5 EV (1/3, 1/2, 1 EV step)
White balance
Mode setting Auto/Preset WB (7 settings)/Customized WB/One-touch WB
145
EN
Information
8
Recording
Memory SD, SDHC, SDXC and Eye-Fi
UHS-I compatible
Recording system Digital recording, JPEG (in accordance with Design rule for Camera File
system (DCF)), RAW Data, MP format
Applicable standards Exif 2.3, Digital Print Order Format (DPOF), PRINT Image Matching III,
PictBridge
Sound with still pictures Wave format
Movie MPEG-4 AVC/H.264 / Motion JPEG
Audio Stereo, PCM 48kHz
Playback
Display format Single-frame playback/Close-up playback/Index display/Calendar display/
My Clips
Drive
Drive mode Single-frame shooting/Sequential shooting/Self-timer
Sequential shooting
(When shooting with
Sequential H )
7.1 fps
8.5 fps (when [Image Stabilization] is set to [Off])
Self-timer Operation time: 12 sec./2 sec./Customized
Energy saving function Switch to sleep mode: 1 minute, Power OFF: 5 minutes
(This function can be customized.)
Flash
Flash control mode TTL-AUTO (TTL pre- ash mode)/MANUAL
Sync speed 1/250 s or slower
Wireless LAN
Compatible standard IEEE 802.11b/g/n
External connector
Multi-connector (USB connector, AV connector)/HDMI micro-connector (type D)/Accessory port
Power supply
Battery Li-ion Battery ×1
Dimensions/weight
Dimensions 117.1 mm (W) × 68.3 mm (H) × 38.4 mm (D) (4.6" × 2.7" × 1.5")
(excluding protrusions)
Weight Approx. 374 g (0.8 Ib.) (including battery and memory card)
Operating environment
Temperature 0 °C - 40 °C (32 °F - 104 °F) (operation)/
–20 °C - 60 °C (–4 °F - 140 °F) (storage)
Humidity 30% - 90% (operation)/10% - 90% (storage)
HDMI, the HDMI logo and High-De nition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
146
EN
Information
8
FL-LM1 Flash
Guide number 7 (ISO100•m) (10 (ISO200•m))
Firing angle Covers the picture angle of a 14 mm lens (equivalent to 28 mm
in 35 mm format)
Dimensions Approx. 39.2 mm (W) × 32.2 mm (H) × 43.4 mm (D)
(1.5" × 1.3" × 1.7")
Weight Approx. 25 g (0.06 Ib.)
Lithium ion battery
Model No. BLS-50
Product type Rechargeable Lithium ion battery
Nominal voltage DC 7.2 V
Nominal capacity 1210 mAh
No. of charge and discharge times Approx. 500 times (varies with usage conditions)
Ambient temperature 0 °C - 40 °C (32 °F - 104 °F) (charging)
Dimensions Approx. 35.5 mm (W) × 12.8 mm (H) × 55 mm (D) (1.4" × 0.5" × 2.2")
Weight Approx. 46 g (0.1 Ib.)
Lithium ion charger
Model No.
BCS-5
Rated input
AC 100 V - 240 V (50/60 Hz)
Rated output
DC 8.35 V, 400 mA
Charging time
Approx. 3 hours 30 minutes (room temperature)
Ambient temperature
0 °C - 40 °C (32 °F - 104 °F) (operation)/
–20 °C - 60 °C (–4 °F - 140 °F) (storage)
Dimensions
Approx. 62 mm (W) × 38 mm (H) × 83 mm (D) (2.4" × 1.5" × 3.3")
Weight (without AC cable)
Approx. 70 g (0.15 Ib.)
The AC cable supplied with this device is for use only with this device and should not be
used with other devices. Do not use cables for other devices with this device.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OR
OBLIGATION ON THE PART OF THE MANUFACTURER.
Visit our website for the latest speci cations.
147
EN
SAFETY PRECAUTIONS
9
9
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL.
An exclamation mark enclosed in a triangle alerts you to important operating
and maintenance instructions in the documentation provided with the
product.
WARNING
If the product is used without observing the information given under this
symbol, serious injury or death may result.
CAUTION
If the product is used without observing the information given under this
symbol, injury may result.
NOTICE
If the product is used without observing the information given under this
symbol, damage to the equipment may result.
WARNING!
TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER DISASSEMBLE, EXPOSE
THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT.
General Precautions
Read All Instructions — Before you use the
product, read all operating instructions. Save all
manuals and documentation for future reference.
Power Source — Connect this product only to
the power source described on the product label.
Foreign Objects — To avoid personal injury,
never insert a metal object into the product.
CleaningAlways unplug this product from
the wall outlet before cleaning. Use only a damp
cloth for cleaning. Never use any type of liquid or
aerosol cleaner, or any type of organic solvent to
clean this product.
Heat — Never use or store this product near
any heat source such as a radiator, heat register,
stove, or any type of equipment or appliance that
generates heat, including stereo ampli ers.
Attachments — For your safety, and to avoid
damaging the product, use only accessories
recommended by Olympus.
Location — To avoid damage to the product,
mount the product securely on a stable tripod,
stand, or bracket.
WARNING
Do not use the camera near ammable or
explosive gases.
Do not use the ash and LED (including
AF illuminator) on people (infants, small
children, etc.) at close range.
You must be at least 1 m (3 ft.) away
from the faces of your subjects. Firing the
ash too close to the subject’s eyes could
cause a momentary loss of vision.
Do not look at the sun or strong lights
with the camera.
Keep young children, infants away from
the camera.
Always use and store the camera out of
the reach of young children and infants to
prevent the following dangerous situations
which could cause serious injury:
Becoming entangled in the camera
strap, causing strangulation.
Accidentally swallowing the battery,
cards or other small parts.
• Accidentally ring the ash into their
own eyes or those of another child.
148
EN
SAFETY PRECAUTIONS
9
Accidentally being injured by the
moving parts of the camera.
Should you notice that the charger is
emitting smoke, heat, or an unusual noise
or smell, immediately cease use and
unplug the charger from the power outlet,
and then contact an authorized distributor
or service center.
Stop using the camera immediately if
you notice any unusual odors, noise, or
smoke around it.
Never remove the batteries with bare
hands, which may cause a re or burn
your hands.
Never hold or operate the camera with wet
hands.
This may cause overheating, exploding,
burning, electrical shocks, or malfunctions.
Do not leave the camera in places where
it may be subject to extremely high
temperatures.
Doing so may cause parts to deteriorate
and, in some circumstances, cause
the camera to catch re. Do not use
the charger if it is covered (such as a
blanket). This could cause overheating,
resulting in re.
Handle the camera with care to avoid
getting a low temperature burn.
When the camera contains metal
parts, overheating can result in a low-
temperature burn. Pay attention to the
following:
When used for a long period, the
camera will get hot. If you hold on
to the camera in this state, a low-
temperature burn may be caused.
In places subject to extremely cold
temperatures, the temperature of the
camera’s body may be lower than the
environmental temperature. If possible,
wear gloves when handling the camera
in cold temperatures.
To protect the high-precision technology
contained in this product, never leave the
camera in the places listed below, no matter if
in use or storage:
Places where temperatures and/or
humidity are high or go through extreme
changes. Direct sunlight, beaches, locked
cars, or near other heat sources (stove,
radiator, etc.) or humidi ers.
In sandy or dusty environments.
• Near ammable items or explosives.
In wet places, such as bathrooms or in
the rain.
In places prone to strong vibrations.
The camera uses a lithium ion battery
speci ed by Olympus. Charge the battery
with the speci ed charger. Do not use any
other chargers.
Never incinerate or heat batteries in
microwaves, on hot plates, or in pressure
vessels, etc.
Never leave the camera on or near
electromagnetic devices.
This may cause overheating, burning, or
exploding.
Do not connect terminals with any metallic
objects.
Take precautions when carrying or storing
batteries to prevent them from coming into
contact with any metal objects such as
jewelry, pins, fasteners, keys, etc.
The short circuit may cause overheating,
exploding, or burning, which burn or damage
you.
To prevent causing battery leaks or damaging
their terminals, carefully follow all instructions
regarding the use of batteries. Never attempt
to disassemble a battery or modify it in any
way, solder, etc.
• If battery uid gets into your eyes, ush
your eyes immediately with clear, cold
running water and seek medical attention
immediately.
If you cannot remove the battery from the
camera, contact an authorized distributor
or service center. Do not try to remove the
battery by force.
Damage to the battery exterior (scratches,
etc.) may produce heat or an explosion.
Always store batteries out of the reach of
small children and pets. If they accidentally
swallow a battery, seek medical attention
immediately.
To prevent batteries from leaking,
overheating, or causing a re or explosion,
use only batteries recommended for use with
this product.
If rechargeable batteries have not been
recharged within the speci ed time, stop
charging them and do not use them.
Do not use batteries with scratches or
damage to the casing, and do not scratch
the battery.
Never subject batteries to strong shocks or
continuous vibration by dropping or hitting.
This may cause exploding, overheating, or
burning.
If a battery leaks, has unusual odor, becomes
discolored or deformed, or becomes
abnormal in any other way during operation,
stop using the camera, and keep away from
re immediately.
149
EN
SAFETY PRECAUTIONS
9
If a battery leaks uid onto your clothing
or skin, remove the clothing and ush the
affected area with clean, running cold water
immediately. If the uid burns your skin, seek
medical attention immediately.
The Olympus lithium ion battery is designed
to be used only for the Olympus digital
camera. Do not use the battery to other
devices.
Do not allow children or animals/pets to
handle or transport batteries (prevent
dangerous behaviour such as licking,
putting in mouth or chewing).
Use Only Dedicated Rechargeable
Battery and Battery Charger
We strongly recommend that you use only the
genuine Olympus dedicated rechargeable battery
and battery charger with this camera.
Using a non-genuine rechargeable battery and/
or battery charger may result in re or personal
injury due to leakage, heating, ignition or damage
to the battery. Olympus does not assume any
liability for accidents or damage that may result
from the use of a battery and/or battery charger
that are not genuine Olympus accessories.
CAUTION
Do not cover the ash with a hand while
ring.
Never store batteries where they will be
exposed to direct sunlight, or subjected to
high temperatures in a hot vehicle, near a
heat source, etc.
Keep batteries dry at all times.
The battery may become hot during
prolonged use. To avoid minor burns, do not
remove it immediately after using the camera.
This camera uses one Olympus lithium ion
battery. Use the speci ed genuine battery.
There is a risk of explosion if the battery is
replaced with the incorrect battery type.
Please recycle batteries to help save our
planet’s resources. When you throw away
dead batteries, be sure to cover their
terminals and always observe local laws and
regulations.
NOTICE
Do not use or store the camera in dusty or
humid places.
Use SD/SDHC/SDXC memory cards or
Eye-Fi cards only. Never use other types
of cards.
If you accidently insert another type of card
into the camera, contact an authorized
distributor or service center. Do not try to
remove the card by force.
Be careful with the strap when you carry the
camera. It could easily catch on stray objects
and cause serious damage.
Before transporting the camera, remove
a tripod and all other non-OLYMPUS
accessories.
Never drop the camera or subject it to severe
shocks or vibrations.
When attaching the camera to or removing
it from a tripod, rotate the tripod screw, not
the camera.
Do not touch electric contacts on cameras.
Do not leave the camera pointed directly
at the sun. This may cause lens or shutter
curtain damage, color failure, ghosting on
the image pickup device, or may possibly
cause res.
Do not push or pull severely on the lens.
Before storing the camera for a long period,
remove the batteries. Select a cool, dry
location for storage to prevent condensation
or mold from forming inside the camera. After
storage, test the camera by turning it on and
pressing the shutter button to make sure that
it is operating normally.
The camera may malfunction if it is used in
a location where it is subject to a magnetic/
electromagnetic eld, radio waves, or high
voltage, such as near a TV set, microwave,
video game, loud speakers, large monitor
unit, TV/radio tower, or transmission towers.
In such cases, turn the camera off and on
again before further operation.
Always observe the operating environment
restrictions described in the camera’s
manual.
Insert the battery carefully as described in the
operating instructions.
Before loading, always inspect the battery
carefully for leaks, discoloration, warping, or
any other abnormality.
Always unload the battery from the camera
before storing the camera for a long period.
When storing the battery for a long period,
select a cool location for storage.
Power consumption by the camera varies
depending on which functions are used.
During the conditions described below, power
is consumed continuously and the battery
becomes exhausted quickly.
The zoom is used repeatedly.
The shutter button is pressed halfway
repeatedly in shooting mode, activating
the auto focus.
A picture is displayed on the monitor for
an extended period of time.
The camera is connected to a printer.
150
EN
SAFETY PRECAUTIONS
9
Using an exhausted battery may cause the
camera to turn off without displaying the
battery level warning.
If the battery’s terminals get wet or greasy,
camera contact failure may result. Wipe the
battery well with a dry cloth before use.
Always charge a battery when using it for
the rst time, or if it has not been used for a
long period.
When operating the camera with battery
power at low temperatures, try to keep
the camera and spare battery as warm as
possible. A battery that has run down at
low temperatures may be restored after it is
warmed at room temperature.
Before going on a long trip, and especially
before traveling abroad, purchase extra
batteries. A recommended battery may be
dif cult to obtain while traveling.
Using the wireless LAN function
Turn off the camera in hospitals and other
locations where medical equipment is
present.
The radio waves from the camera may
adversely affect medical equipment, causing
a malfunction that results in an accident.
Turn off the camera when onboard
aircraft.
Using wireless devices onboard may hinder
safe operation of the aircraft.
Monitor
Do not push the monitor forcibly; otherwise
the image may become vague, resulting in
a playback mode failure or damage to the
monitor.
A strip of light may appear on the top/bottom
of the monitor, but this is not a malfunction.
When a subject is viewed diagonally in the
camera, the edges may appear zigzagged on
the monitor. This is not a malfunction; it will
be less noticeable in playback mode.
In places subject to low temperatures, the
monitor may take a long time to turn on or its
color may change temporarily.
When using the camera in extremely cold
places, it is a good idea to occasionally place
it in a warm place. The monitor exhibiting
poor performance due to low temperatures
will recover in normal temperatures.
The monitor of this product is manufactured
with high-quality accuracy, however, there
may be a stuck or dead pixel on the monitor.
These pixels do not have any in uence
on the image to be saved. Because of the
characteristics, the unevenness of the color
or brightness may also be found depending
on the angle, but this is due to the structure
of the monitor. This is not a malfunction.
Legal and Other Notices
Olympus makes no representations or
warranties regarding any damages, or
bene t expected by using this unit lawfully,
or any request from a third person, which
are caused by the inappropriate use of this
product.
Olympus makes no representations or
warranties regarding any damages or any
bene t expected by using this unit lawfully
which are caused by erasing picture data.
Disclaimer of Warranty
Olympus makes no representations or
warranties, either expressed or implied, by
or concerning any content of these written
materials or software, and in no event
shall be liable for any implied warranty of
merchantability or tness for any particular
purpose or for any consequential, incidental
or indirect damages (including but not limited
to damages for loss of business pro ts,
business interruption and loss of business
information) arising from the use or inability
to use these written materials or software
or equipment. Some countries do not allow
the exclusion or limitation of liability for
consequential or incidental damages or of
the implied warranty, so the above limitations
may not apply to you.
Olympus reserves all rights to this manual.
Warning
Unauthorized photographing or use of
copyrighted material may violate applicable
copyright laws. Olympus assumes no
responsibility for unauthorized photographing,
use or other acts that infringe upon the rights of
copyright owners.
Copyright Notice
All rights reserved. No part of these written
materials or this software may be reproduced
or used in any form or by any means, electronic
or mechanical, including photocopying and
recording or the use of any type of information
storage and retrieval system, without the prior
written permission of Olympus. No liability
is assumed with respect to the use of the
information contained in these written materials
or software, or for damages resulting from
the use of the information contained therein.
Olympus reserves the right to alter the features
and contents of this publication or software
without obligation or advance notice.
151
EN
SAFETY PRECAUTIONS
9
FCC Notice
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/
TV technician for help.
Only the OLYMPUS-supplied USB cable
should be used to connect the camera to
USB enabled personal computers.
FCC/IC Caution
Changes or modi cations not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
This transmitter must not be co-located or
operated in conjunction with any other antenna
or transmitter.
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency
(RF) Exposure Guidelines. This equipment has
very low levels of RF energy that are deemed
to comply without testing of speci c absorption
rate (SAR).
The available scienti c evidence does not show
that any health problems are associated with
using low power wireless devices. There is no
proof, however, that these low power wireless
devices are absolutely safe. Low power Wireless
devices emit low levels of radio frequency energy
(RF) in the microwave range while being used.
Whereas high levels of RF can produce health
effects (by heating tissue), exposure of low-level
RF that does not produce heating effects causes
no known adverse health effects. Many studies
of low-level RF exposures have not found any
biological effects. Some studies have suggested
that some biological effects might occur, but such
ndings have not been con rmed by additional
research. IM001 has been tested and found to
comply with IC radiation exposure limits set forth
for an uncontrolled environment and meets RSS-
102 of the IC radio frequency (RF) Exposure
rules.
152
EN
SAFETY PRECAUTIONS
9
For customers in North America, Central America, South America
and the Caribbean
Declaration of Conformity
Model Number : IM001
Trade Name : OLYMPUS
Responsible Party :
Address : 3500 Corporate Parkway, P. O. Box 610, Center Valley, PA 18034-0610, USA
Telephone Number : 484-896-5000
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-3(B)/NMB-3(B)
OLYMPUS AMERICAS LIMITED WARRANTY -
OLYMPUS AMERICA INC. PRODUCTS
Olympus warrants that the enclosed Olympus®
imaging product(s) and related Olympus®
accessories (individually a “Product” and
collectively the “Products”) will be free from
defects in materials and workmanship under
normal use and service for a period of one (1)
year from the date of purchase.
If any Product proves to be defective within the
one-year warranty period, the customer must
return the defective Product to the authorized
Olympus Repair Service Center designated
by Olympus, following the procedure set forth
below (See “WHAT TO DO WHEN SERVICE IS
NEEDED”).
Olympus, at its sole discretion, will repair,
replace, or adjust the defective Product at
Olympus’s cost, provided that an Olympus
investigation and factory inspection disclose that
(a) such defect developed under normal and
proper use and (b) the Product is covered under
this limited warranty.
Repair, replacement, or adjustment of defective
Products shall be Olympus’s sole obligation and
the customer’s sole remedy hereunder. Repair
or replacement of a Product shall not extend the
warranty period provided herein, unless required
by law.
Except where prohibited by law, the customer
is liable and shall pay for shipment of the
Products to the designated Olympus Repair
Service Center. Olympus shall not be obligated
to perform preventive maintenance, installation,
deinstallation, or maintenance.
Olympus reserves the right to (i) use
reconditioned, refurbished, and/or serviceable
used parts (that meet Olympus’s quality
assurance standards) for warranty or any other
repairs and (ii) make any internal or external
design and/or feature changes on or to its
products without any liability to incorporate such
changes on or to the Products.
WHAT IS NOT COVERED BY THIS LIMITED
WARRANTY
Excluded from this limited warranty and not
warranted by Olympus in any fashion, either
express, implied, or by statute, are:
(a) products and accessories not manufactured
by Olympus and/or not bearing the
“OLYMPUS” brand label (the warranty
coverage for products and accessories
of other manufacturers, which may be
distributed by Olympus, is the responsibility
of the respective manufacturer of such
products and accessories in accordance
with the terms and duration of such
manufacturers’ warranties);
(b) any Product which has been disassembled,
repaired, tampered with, altered, changed,
or modi ed by persons other than Olympus’s
own authorized service personnel unless
repair by others is made with the written
consent of Olympus;
(c) defects or damage to the Products resulting
from wear, tear, misuse, abuse, negligence,
sand, liquids, impact, improper storage,
nonperformance of scheduled operator
and maintenance items, battery leakage,
use of non-“OLYMPUS” brand accessories,
consumables, or supplies, or use of the
Products in combination with non-compatible
devices;
(d) software programs;
(e) supplies and consumables (including but
not limited to lamps, ink, paper, lm, prints,
negatives, cables and batteries); and/or
153
EN
SAFETY PRECAUTIONS
9
(f) Products which do not contain a validly
placed and recorded Olympus serial number,
unless they are a model on which Olympus
does not place and record serial numbers.
(g) Products shipped, delivered, purchased, or
sold from dealers located outside of North
America, Central America, South America
and the Caribbean; and/or
(h) Products that are not intended or authorized
to be sold in North America, South America,
Central America, or the Caribbean (ie. Gray
Market Goods).
WARRANTY DISCLAIMER; LIMITATION
OF DAMAGES; AFFIRMATION OF ENTIRE
WARRANTY AGREEMENT; INTENDED
BENEFICIALLY
EXCEPT FOR THE LIMITED WARRANTY SET
FORTH ABOVE, OLYMPUS MAKES NO AND
DISCLAIMS ALL OTHER REPRESENTATIONS,
GUARANTIES, CONDITIONS, AND
WARRANTIES CONCERNING THE
PRODUCTS, WHETHER DIRECT OR
INDIRECT, EXPRESS OR IMPLIED, OR
ARISING UNDER ANY STATUTE, ORDINANCE,
COMMERCIAL USAGE OR OTHERWISE,
INCLUDING BUT NOT LIMITED TO ANY
WARRANTY OR REPRESENTATION AS TO
THE SUITABILITY, DURABILITY, DESIGN,
OPERATION, OR CONDITION OF THE
PRODUCTS (OR ANY PART THEREOF)
OR THE MERCHANTABILITY OF THE
PRODUCTS OR THEIR FITNESS FOR A
PARTICULAR PURPOSE, OR RELATING
TO THE INFRINGEMENT OF ANY PATENT,
COPYRIGHT, OR OTHER PROPRIETARY
RIGHT USED OR INCLUDED THEREIN.
IF ANY IMPLIED WARRANTIES APPLY AS
A MATTER OF LAW, THEY ARE LIMITED IN
DURATION TO THE LENGTH OF THIS LIMITED
WARRANTY.
SOME STATES MAY NOT RECOGNIZE
A DISCLAIMER OR LIMITATION OF
WARRANTIES AND/OR LIMITATION OF
LIABILITY SO THE ABOVE DISCLAIMERS AND
EXCLUSIONS MAY NOT APPLY.
THE CUSTOMER MAY ALSO HAVE
DIFFERENT AND/OR ADDITIONAL RIGHTS
AND REMEDIES THAT VARY FROM STATE
TO STATE.
THE CUSTOMER ACKNOWLEDGES AND
AGREES THAT OLYMPUS SHALL NOT BE
RESPONSIBLE FOR ANY DAMAGES THAT
THE CUSTOMER MAY INCUR FROM DELAYED
SHIPMENT, PRODUCT FAILURE, PRODUCT
DESIGN, SELECTION, OR PRODUCTION,
IMAGE OR DATA LOSS OR IMPAIRMENT
OR FROM ANY OTHER CAUSE, WHETHER
LIABILITY IS ASSERTED IN CONTRACT, TORT
(INCLUDING NEGLIGENCE AND STRICT
PRODUCT LIABILITY) OR OTHERWISE. IN NO
EVENT SHALL OLYMPUS BE LIABLE FOR ANY
INDIRECT, INCIDENTAL, CONSEQUENTIAL
OR SPECIAL DAMAGES OF ANY KIND
(INCLUDING WITHOUT LIMITATION LOSS
OF PROFITS OR LOSS OF USE), WHETHER
OR NOT OLYMPUS SHALL BE OR SHOULD
BE AWARE OF THE POSSIBILITY OF SUCH
POTENTIAL LOSS OR DAMAGE.
Representations and warranties made by any
person, including but not limited to dealers,
representatives, salespersons, or agents of
Olympus, which are inconsistent or in con ict
with or in addition to the terms of this limited
warranty, shall not be binding upon Olympus
unless reduced to writing and approved by an
expressly authorized of cer of Olympus.
This limited warranty is the complete and
exclusive statement of warranty which
Olympus agrees to provide with respect to the
Products and it shall supersede all prior and
contemporaneous oral or written agreements,
understandings, proposals, and communications
pertaining to the subject matter hereof.
This limited warranty is exclusively for the
bene t of the original customer and cannot be
transferred or assigned.
WHAT TO DO WHEN SERVICE IS NEEDED
The customer must contact the designated
Olympus Consumer Support Team for your
region to coordinate the submission of your
Product for repair service. To contact your
Olympus Consumer Support Team in your region
please visit or call the following:
Canada:
www.olympuscanada.com/repair /
1-800-622-6372
United States:
www.olympusamerica.com/repair /
1-800-622-6372
Latin America:
www.olympusamericalatina.com
The customer must copy or transfer any image or
other data saved on a Product to another image
or data storage medium prior to sending the
Product to Olympus for for repair service.
IN NO EVENT SHALL OLYMPUS BE
RESPONSIBLE FOR SAVING, KEEPING OR
MAINTAINING ANY IMAGE OR DATA SAVED
ON A PRODUCT RECEIVED BY IT FOR
SERVICE, OR ON ANY FILM CONTAINED
WITHIN A PRODUCT RECEIVED BY IT
FOR SERVICE, NOR SHALL OLYMPUS BE
RESPONSIBLE FOR ANY DAMAGES IN
THE EVENT ANY IMAGE OR DATA IS LOST
OR IMPAIRED WHILE SERVICE IS BEING
PERFORMED (INCLUDING, WITHOUT
154
EN
SAFETY PRECAUTIONS
9
LIMITATION, DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES,
LOSS OF PROFITS OR LOSS OF USE),
WHETHER OR NOT OLYMPUS SHALL BE OR
SHOULD BE AWARE OF THE POSSIBILITY OF
SUCH POTENTIAL LOSS OR IMPAIRMENT.
The customer should package the Product
carefully using ample padding material to prevent
damage in transit. Once the Product is properly
packaged, ship the package to Olympus or the
Olympus Authorized Repair Service Center
location as instructed by the respective Olympus
Consumer Support Team.
When sending Products for repair service, your
package should include the following:
1) Sales receipt showing date and place of
purchase. Handwritten receipts will not be
accepted;
2) Copy of this limited warranty bearing the
Product serial number corresponding to
the serial number on the Product (unless it
is a model on which Olympus does not place
and record serial numbers);
3) A detailed description of the problem; and
4) Sample prints, negatives, digital prints (or
les on disk) if available and related to the
problem.
KEEP COPIES OF ALL DOCUMENTS. Neither
Olympus nor an Olympus Authorized Repair
Service Center will be responsible for documents
that are lost or destroyed in transit.
When service is completed, the Product will be
returned to you postage prepaid.
PRIVACY
Any information provided by you to process your
warranty claim shall be kept con dential and
will only be used and disclosed for the purposes
of processing and performing warranty repair
services.
For customers in Europe
“CE” mark indicates that this
product complies with the
European requirements for safety,
health, environment and customer
protection. “CE” mark cameras
are intended for sales in Europe.
Simple Declaration of Comformity
Hereby, OLYMPUS CORPORATION declares
that the radio equipment type IM001 is in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following internet address:
http://www.olympus-europa.com/
This symbol [crossed-out
wheeled bin WEEE Annex IV]
indicates separate collection of
waste electrical and electronic
equipment in the EU countries.
Please do not throw the
equipment into the domestic
refuse.
Please use the return and
collection systems available in
your country for the disposal of
this product.
This symbol [crossed-out wheeled
bin Directive 2006/66/EC Annex
II] indicates separate collection
of waste batteries in the EU
countries.
Please do not throw the batteries
into the domestic refuse.
Please use the return and
collection systems available in
your country for the disposal of
the waste batteries.
155
EN
SAFETY PRECAUTIONS
9
Provisions of warranty
In the unlikely event that your product proves
to be defective, although it has been used
properly (in accordance with the written
Instruction Manual supplied with it), during the
applicable national warranty period and has
been purchased from an authorized Olympus
distributor within the business area of OLYMPUS
EUROPA SE & Co. KG as stipulated on the
website: http://www.olympus-europa.com, it will
be repaired, or at Olympus’s option replaced,
free of charge. In order to enable Olympus to
provide you with the requested warranty services
to your full satisfaction and as fast as possible,
please note the information and instructions
listed below:
1. To claim under this warranty please follow
the instructions on http://consumer-service.
olympus-europa.com for registration and
tracking (this service is not available in
all countries) or take the product, the
corresponding original invoice or purchase
receipt and the completed Warranty
Certi cate to the dealer where it was
purchased or any other Olympus service
station within the business area of OLYMPUS
EUROPA SE & Co. KG as stipulated on the
website: http://www.olympus-europa.com,
before the end of the applicable national
warranty period.
2. Please make sure your Warranty Certi cate is
duly completed by Olympus or an authorized
dealer or Service center. Therefore, please
make sure that your name, the name of the
dealer, the serial number and the year, month
and date of purchase are all completed or the
original invoice or the sales receipt (indicating
the dealer’s name, the date of purchase and
product type) is attached to your Warranty
Certi cate.
3. Since this Warranty Certi cate will not be
re-issued, keep it in a safe place.
4. Please note that Olympus will not assume
any risks or bear any costs incurred in
transporting the product to the dealer or
Olympus authorized service station.
5. This Warranty does not cover the following
and you will be required to pay a repair
charge, even for defects occurring within the
warranty period referred to above.
a. Any defect that occurs due to mishandling
(such as an operation performed that is
not mentioned in the Instruction Manual,
etc.)
b. Any defect that occurs due to repair,
modi cation, cleaning, etc. performed
by anyone other than Olympus or an
Olympus authorized service station.
c. Any defect or damage that occurs due to
transport, a fall, shock, etc. after purchase
of the product.
d. Any defect or damage that occurs due
to re, earthquake, ood damage,
thunderbolt, other natural disasters,
environmental pollution and irregular
voltage sources.
e. Any defect that occurs due to careless
or improper storage (such as keeping
the product under conditions of high
temperature and humidity, near insect
repellents such as naphthalene or harmful
drugs, etc.), improper maintenance, etc.
f. Any defect that occurs due to exhausted
batteries, etc.
g. Any defect that occurs due to sand,
mud, water etc. entering the inside of the
product casing.
6. Olympus’s sole liability under this Warranty
shall be limited to repairing or replacing the
product. Any liability under the Warranty for
indirect or consequential loss or damage of
any kind incurred or suffered by the customer
due to a defect of the product, and in
particular any loss or damage caused to any
lenses, lms, other equipment or accessories
used with the product or for any loss resulting
from a delay in repair or loss of data, is
excluded. Compelling regulations by law
remain unaffected by this.
For customers in Thailand
This telecommunication equipment is in
compliance with NTC requirements.
For customers in Mexico
The operation of this equipment is subject to the
following two conditions:
(1) it is possible that this equipment or device
may not cause harmful interference, and (2)
this equipment or device must accept any
interference, including interference that may
cause undesired operation.
For customer in Singapore
156
EN
SAFETY PRECAUTIONS
9
Trademarks
Microsoft and Windows are registered
trademarks of Microsoft Corporation.
Macintosh is a trademark of Apple Inc.
SDXC Logo is a trademark of SD-3C, LLC.
Eye-Fi is a trademark of Eye-Fi,
Inc.
• “Shadow Adjustment
Technology” function contains
patented technologies from
Apical Limited.
Micro Four Thirds, Four Thirds,
and the Micro Four Thirds and
Four Thirds logos are trademarks or registered
trademarks of the OLYMPUS CORPORATION
in Japan, the United States, the countries of
the European Union, and other countries.
Wi-Fi is a registered trademark of the Wi-Fi
Alliance.
The Wi-Fi CERTIFIED
logo is a certi cation mark
of the Wi-Fi Alliance.
The standards for camera
le systems referred to in this manual are the
“Design Rule for Camera File System/DCF”
standards stipulated by the Japan Electronics
and Information Technology Industries
Association (JEITA).
All other company and product names are
registered trademarks and/or trademarks of
their respective owners.
THIS PRODUCT IS LICENSED UNDER THE
AVC PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NONCOMMERCIAL USE
OF A CONSUMER TO (i) ENCODE VIDEO IN
COMPLIANCE WITH THE AVC STANDARD (“AVC
VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT
WAS ENCODED BY A CONSUMER ENGAGED
IN A PERSONAL AND NON-COMMERCIAL
ACTIVITY AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED TO PROVIDE
AVC VIDEO. NO LICENSE IS GRANTED OR
SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED
FROM MPEG LA, L.L.C. SEE HTTP://WWW.
MPEGLA.COM
The software in this camera may include third
party software. Any third party software is subject
to the terms and conditions, imposed by the
owners or licensors of that software, under which
software is provided to you.
Those terms and other third party software
notices, if any, may be found in the software
notice PDF le stored within the accompanying
CD-ROM or at
http://www.olympus.co.jp/en/support/imsg/
digicamera/download/notice/notice.cfm
157
EN
Index
Symbols
# RC Mode .......................................127
W ......................................................87
c/# Menu Display .............................87
P Set Home .....................................88
I (Face Priority AF) ......................47, 88
j H fps..............................................89
j L fps ..............................................89
G/Info Settings ..................................90
K Control Settings .............................90
z (Preview) lock .................................91
q Close Up Mode ..............................91
# Slow Limit........................................92
# X-Sync. ...................................92, 106
w+F .................................................92
#+WB .................................................93
8 Warning Level .............................96
I/H ................................................98
G (Index display) ...............................67
U (Close-up playback) .......................67
n Mode ..............................................95
(Single-frame erase) .......................69
v (Picture selection) ..........................70
0 (Protecting)...................................69
W Keep Warm Color .........................93
R (Image rotation) .............................84
K Set ................................................93
8 (Beep sound) .................................91
R (Audio recording) .............................70
i (Monitor brightness adjustment) ....87
m (Slideshow) ...................................68
j Image Stabilization........................89
A
A (Aperture-priority mode) ..................31
Accessory Port Menu ........................107
Address Book ....................................108
AEL/AFL ..............................................97
AEL Metering .......................................92
AE Lock ...................................18, 97, 98
AF Area (P)......................................46
AF illuminator.......................................88
AF Mode ........................................49, 88
AF Tracking .........................................49
Album Mem. Usage ...........................109
All > ...............................................93
Anti-Shock ...........................................92
ART (Art lter) ................................20, 26
Art Fade ...............................................37
Art Filter ...............................................26
Art LV Mode .........................................90
Aspect ratio..........................................56
Audio Recording ............................70, 86
Auto Focus Sound (Beep sound) ........91
B
Backlit LCD ..........................................91
Battery level .........................................16
BKT (Bracketing) .................................78
Bracketing............................................78
BULB ...................................................33
Bulb Photography ................................33
Bulb/Time Focusing .............................88
Bulb/Time Monitor ...............................92
Bulb/Time Timer ..................................92
Button Function .............................89, 98
C
C-AF ....................................................49
C-AF+TR .............................................49
Calendar Display ...................67, 71, 106
Card ............................................. 14, 124
Card Setup ..........................................73
Charging .............................................. 13
Close-up playback ...............................67
Color Space .........................................93
Composite Photography ......................34
Composite Settings .............................92
Compression ...............................56, 125
Connection to Smartphone ................ 111
Continuous AF .....................................49
Copy All .............................................109
158
EN
Copyright Settings ...............................94
Custom Menu (c) ...............................88
D
Date/time setting X.............................17
Dial Direction .......................................89
Dial Function........................................89
Digital Tele-converter .....................76, 99
Displayed Grid .....................................90
Display Interval ....................................18
During Playback ................................64
While Shooting ..................................18
dpi Settings ..........................................94
E
Edit Filename.......................................94
Editing Still Images ..............................84
Electronic View Finder .......................129
Electronic Zoom Speed .......................96
Erase ...................................................69
All Erase ...........................................73
Erase ................................................69
Erase Selected .................................70
EVF....................................................109
EV Step ...............................................91
Exposure Compensation .....................45
Exposure Shift .....................................96
Eye-Fi ..................................................96
F
Face Priority AF .............................47, 88
File Name ............................................94
Firmware ..............................................87
Flash Compensation............................60
Flash intensity control w ....................60
Flicker reduction ..................................90
Fn ........................................................ 11
Focus Mode (AF mode) .......................49
Focus Ring ..........................................88
Format (Card setup) ............................73
Full-time AF .........................................88
G
Grainy Film ....................................26, 61
H
Half Way Rls With IS ...........................89
HDMI ...................................................90
HDR ..................................................... 80
High Dynamic Range (HDR) ...............80
Highlight&Shadow Control...................50
Histogram Display ...............................19
Histogram Settings ..............................90
I
iAUTO (A) ...............................20, 22
Image Aspect .......................................56
Image Overlay .....................................86
Image Size.........................................125
Movie ................................................57
Still image .........................................56
Image Stabilizer ...................................53
Index Display .........................67, 71, 106
INFO button .............................19, 47, 65
Info Settings (G/Info Settings) ...........90
ISO ................................................51, 91
ISO-Auto .............................................. 92
ISO-Auto Set .......................................92
ISO sensitivity ......................................51
ISO Step ..............................................91
J
JPEG Edit ............................................85
L
Lens I.S. Priority ..................................89
Level Adjust .........................................96
Level Gauge ........................................19
Light Box............................................105
Live Bulb ..............................................92
Live Composite Photography ..............34
Live Control .........................................44
Live Guide .....................................22, 99
Live Time .............................................92
LIVE TIME ...........................................33
Live View Boost ...................................90
Location Information .......................... 113
Long Time Exposure (BULB/TIME) .....33
LV super control panel ...............102, 103
159
EN
M
M (Manual mode) ................................33
Manual Focus (MF) .............................49
Menu Display (c/# Menu Display) ....87
Metering...............................................50
MF .......................................................98
MF Assist .......................................88, 97
MF (Manual focus)...............................49
Mode Dial Function..............................89
Mode Guide .........................................90
Monochrome........................................61
Movie R .........................................62, 95
Movie Effect .........................................37
Movie+Photo Mode .............................38
Movie Tele-converter ...........................38
Multi Echo ............................................37
Multiple Exposure ................................81
My Clips ...............................................39
My OLYMPUS PENPAL .....................109
Myset ................................................... 74
N
Noise Filter ..........................................91
Noise Reduct. ......................................91
O
OLYMPUS PENPAL ..................107, 108
One Shot Echo ....................................37
P
P (Program mode) ..............................30
Panning ...............................................24
Panorama ............................................ 25
Peaking Settings..................................91
PHOTO STORY ...................................28
Picture Copy Size ..............................109
Picture Mode .................................61, 75
Picture Mode Settings .........................90
Pixel Count ..........................................93
Pixel Mapping ....................................133
Playback .............................................. 66
Movie Playback ...........................66, 69
Still Image Playback ...................66, 67
Playback Menu ....................................84
Preview ................................................ 98
Preview Lock .......................................91
Print ................................................... 119
Print reservation < ...........................121
Priority Set ...........................................94
Program shift (%) ...............................30
Pupil Detection AF ...............................47
Q
Quick Erase .........................................94
R
RAW ....................................................56
RAW Data Edit ....................................84
RAW+JPEG Erase ..............................94
RC Mode (# RC Mode) ....................127
Recording Volume ...............................95
Rec View .............................................87
Registration ....................................... 117
Release Lag-Time ...............................89
Reset ...................................................74
Reset Lens ..........................................88
Reset Protect ...............................86, 109
Rls Priority C/S ....................................89
Rotate .................................................. 67
S
S (shutter-priority mode) .....................32
S-AF ....................................................49
S-AF+MF .............................................49
Scene Mode ........................................24
SCN (Scene mode) .......................20, 24
SD card..............................................124
Format SD card ................................73
Self Timer ............................................54
Sequential shooting .............................54
Set Home (P Set Home)..................88
Setup Menu .........................................87
Shading Comp. ....................................93
Share Order .........................................70
Shooting ..............................................20
Movie Recording ...............................37
Shooting Photography ......................20
Shooting Menu ....................................73
160
EN
Single AF .............................................49
Sleep .............................................16, 91
Slideshow ............................................68
Slow Synchronization ..........................59
Small Target (Small AF target) .............46
Storage .............................................. 116
Super Spot AF (Zoom frame AF) .........48
T
Test Picture ..........................................98
Time Lapse Movie ...............................82
Time Lapse Shooting ...........................82
Time Photography ...............................33
Touch AF..............................................35
Touch Screen Settings.........................96
TV ...................................................... 100
U
USB Mode ...........................................91
V
Video Out .............................................90
Volume Adjustment ..............................68
W
WB ................................................. 52, 93
Wi-Fi settings ..................................... 114
Wind Noise Reduction .........................95
Wireless LAN ..................................... 114
Wireless Remote Control Flash .........127
Z
Zoom frame AF ....................................48
WD128702
date of issue 2016.02.
156

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Olympus E-PL8 - Pen bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Olympus E-PL8 - Pen in de taal/talen: Engels als bijlage per email.

De handleiding is 7,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Olympus E-PL8 - Pen

Olympus E-PL8 - Pen Gebruiksaanwijzing - Nederlands - 165 pagina's

Olympus E-PL8 - Pen Gebruiksaanwijzing - Deutsch - 168 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info