18429

Olympus DS2 Handleiding

9
Verklein
Vergroot
Pagina terug
1/120
Pagina verder
DIGITAL VOICE
RECORDER
DS-2
ONLINE
INSTRUCTIONS
Thank you for purchasing an Olympus
Digital Voice Recorder.
Please read these instructions for information
about using the product correctly and safely.
Keep the instructions handy for future reference.
To ensure successful recordings, we
recommend that you test the record function
and volume before use.
E
N
2
Table of Contents
Table of Contents ...................................... 2
Safe and Proper Usage ............................. 4
General Precautions .................................. 4
1 Getting Started
Main Features............................................ 6
Identification of Parts ................................. 9
Inserting Batteries ................................... 11
Power Supply .......................................... 12
Hold.......................................................... 13
Setting Time/Date (TIME&DATE) ............ 14
2 Menu Setting
Menu Setting Method .............................. 16
Menu List ................................................. 18
3 About Recording
Recording ................................................ 20
Recording Modes (REC MODE) ............. 22
Using the Variable Control
Voice Actuator (VCVA) ...................... 23
Microphone Sensitivity (MIC SENSE) ..... 25
Recording from External Microphone
or Other Devices ............................... 26
Timer Recording (TIMER REC) .............. 28
Listening While Audio is Recorded
(Recording Monitor) .......................... 32
4 About Playback
Playing ..................................................... 33
Changing the Playback Speed
(PLAY SPEED) ................................... 39
Continuous Playback (ALL PLAY) ........... 41
Repeat Playback ..................................... 42
Auto Backspace Review
(BACK SPACE) ................................. 44
Skip Interval Setting (SKIP SPACE) ....... 45
Noise Cancel Function ............................ 47
Alarm Playback Function (ALARM) ........ 48
5 Other functions
Erasing ..................................................... 51
Locking Files (LOCK) .............................. 55
Index Marks ............................................. 56
LCD Contrast Adjustment
(CONTRAST) .................................... 58
Backlight (BACKLIGHT) .......................... 59
System Sounds (BEEP) .......................... 60
Assigning Folder Names
(FOLDER NAME) .............................. 61
Assigning File Comments
(COMMENT) ..................................... 64
Moving Files Across Folders ................... 65
LCD Display Information ......................... 66
Formatting the Recorder (FORMAT)....... 68
3
1
2
3
4
5
6
7
8
9
10
11
6 Preparation Before Using
DSS Player
Using DSS Player Software .................... 70
Operating Environment ........................... 71
Installing Software ................................... 72
Uninstalling Software ............................... 75
Using Online Help ................................... 77
Connecting to Your PC ............................ 78
Running DSS Player ............................... 83
Window Names (DSS Player) ................. 85
7 Managing Files on Your PC
Download Voice Files
from the Recorder ............................. 86
Play a Voice File ...................................... 88
Upload Voice Files to the Recorder ........ 89
Send Voice Files with E-mail................... 91
Changing User ID .................................... 91
Changing a Folder Name ........................ 92
Editing File Comments ............................ 92
Editing a Template ................................... 93
USB Microphone/USB Speaker .............. 94
8 DSS Player Expanded
Functions
Upgrade Function .................................... 96
Using Voice Recognition Software .......... 98
Joining Files ........................................... 106
Splitting Files .......................................... 108
Menu Setting of this Recorder .............. 110
9 Setting of the USB Class
Changing the USB Class
(USB CLASS) .................................. 111
10 Other Practical Use Methods
Using as External Memory
of the Computer .............................. 112
11 Other Information
Alarm Message List ............................... 113
Troubleshooting ..................................... 115
Accessories (optional) ........................... 117
Specifications ........................................ 118
Technical Assistance and Support ........ 119
4
Safe and Proper
Usage
Before using your new recorder, read this
manual carefully to ensure that you know
how to operate it safely and correctly.
Keep this manual in an easily accessible
location for future reference.
• The warning symbols indicate important safety
related information. To protect yourself and
others from personal injury or damage to
property, it is essential that you always read the
warnings and information provided.
General Precautions
● Do not leave the recorder in hot,
humid locations such as inside a
closed automobile under direct
sunlight or on the beach in the
summer.
● Do not store the recorder in places
exposed to excessive moisture or
dust.
● Do not use organic solvents such as
alcohol and lacquer thinner to clean
the unit.
● Do not place the recorder on top of
or near electric appliances such as
TVs or refrigerators.
● Avoid recording or playing back near
cellular phones or other wireless
equipment, as they may cause
interference and noise. If you
experience noise, move to another
place, or move the recorder further
away from such equipment.
● Avoid sand or dirt. These can cause
irreparable damage.
● Avoid strong vibrations or shocks.
● Do not disassemble, repair or modify
the unit yourself.
5
Batteries
Warning
• Batteries should never be exposed to
flame, heated, short-circuited or
disassembled.
• Do not attempt to recharge alkaline,
lithium or any other non-rechargeable
batteries.
• Never use any battery with a torn or
cracked outer cover.
• Keep batteries out of the reach of
children.
• If you notice anything unusual when
using this product such as abnormal
noise, heat, smoke, or a burning odor:
1 remove the batteries immediately
while being careful not to burn
yourself, and;
2 call your dealer or local Olympus
representative for service.
● Do not operate the unit while
operating a vehicle (such as a
bicycle, motorcycle, or go-cart).
● Keep the unit out of the reach of
children.
<Warning regarding data loss>
Recorded content in memory may be
destroyed or erased by operating
mistakes, unit malfunction, or during
repair work.
It is recommended to back up and save
important content to other media such as
a computer hard disk.
6
1
● By using the built-in stereo microphone, 2
types of stereo recording modes, which
are Stereo HQ (stereo high quality sound
recording) and Stereo SP (stereo standard
recording) and 3 types of monaural
recording modes, which are HQ (high
quality sound recording), SP (standard
recording), and LP (long-term recording)
can be selected.*
1
(☞ P.22)
Recording time
STEREO HQ mode : 1 hours 5 minutes
STEREO SP mode : 2 hours 10 minutes
HQ mode : 4 hours 20 minutes
SP mode : 10 hours 25 minutes
LP mode : 22 hours 20 minutes
• Available recording time for one continuous
file. Available recording time may be shorter if
many short recordings are made. (The
displayed available recording time and
recorded time are approximate indications.)
● You may assign your own names to
folders. (☞ P.61)
This product is equipped with the following
features.
● Connect the cradle and the USB
connection cable to this recorder, and high
speed data transfer to a computer can be
performed. (☞ P.78)
● This recorder can also be utilized as
external memory of a computer. (☞ P.112)
• By connecting the computer with the USB,
pictures, text data, etc. can be saved, and
utilized to carry data.
● It has a large backlight full-dot display
(LCD display screen). (☞ P.60)
• The screen displays information about
recorded voice files and easily understood
operational messages.
● The recorder stores highly compressed
DSS and WMA format voice messages in
internal flash memory.*
1
1 Getting Started
Main Features
Main Features
7
1
Main Features
● The five folders can hold 199 files each,
for the maximum of 995 recordings.
(☞ P.20)
● It has a built-in Variable Control Voice
Actuator (VCVA) function. (☞ P.23)
● A timer recording function is built-in, which
can record at a set time. (☞ P.28)
● You can input file comments.*
2
(☞ P.64)
• You can add comments of up to 100 characters
to each recorded file.
• This recorder has 10 pre-set comment
templates.
● The recorder has a Noise Cancel Function.*
2
(☞ P.47)
• Ruwisch & Kollegen GmbH Noise Suppression
Technology reduces noise in files and enables
clear sound playback.
● Recorded files may be moved from one
folder to another. (☞ P.65)
● You can insert or delete index marks. *
2
(☞ P.56)
• If you insert index marks during recording or
playback, you will later be able to quickly find
the recording you want to hear.
● The playback speed can be controlled as
preferred. (☞ P.39)
● Fast forward and rewind are possible at a
set interval. (☞ P.45)
● Comes with DSS Player software. (☞ P.70)
• If you transfer voice files recorded with the
recorder to a PC, you can easily play back,
organize, and edit the files.
• If you connect the recorder to a computer, you
can use it as a USB microphone or USB
speaker. (☞ P.94)
● The “DSS Player” can be upgraded to a
“DSS Player Plus”, which is equipped with
a enhanced functionality (Option). (☞ P.96)
• If a commercial voice recognition software is
utilized, the recorded voice file can be converted
to characters automatically.*
3
(☞ P.106)
• In addition to the “DSS Player” functions,
joining and splitting of the files and configuring
the menu settings of this recorder, etc. can be
performed.
The “DSS Player” can be upgraded
to “DSS Player Plus”, which is
equipped with enhanced functionality
(paid option). (☞P.96)
Plus
8
1
*1: DSS format in SP and LP mode recording, and
WMA format in stereo HQ and stereo SP and
HQ mode recording.
*2: For WMA files, these functions are only
available for files recorded with this recorder
or the IC recorders from Olympus.
*3: In a quiet environment, it is necessary to set
this recorder to stereo HQ, stereo SP, HQ mode
or SP mode, and that the person whose voice
is registered in the speech recognition software
speak with the constant tone of voice when
recording.
The voice file recorded under the following
conditions is not suitable for character
conversion, since the software may have
difficulty in recognizing the voice.
— Meetings, discussions where voices of more
than one person can be recorded
— Conferences, lectures where the
surrounding noise can be recorded
Main Features
IBM, PC/AT, and ViaVoice are the trademarks or
registered trademarks of International Business
Machines Corporation.
Microsoft, Windows and Windows Media are
registered trademarks of Microsoft Corporation.
Apple, Macintosh, iMac, Mac, and PowerMac are
trademarks or registered trademarks of Apple
Computer, Inc.
Intel and Pentium are registered trademarks of Intel
Corporation.
CORTOLOGIC is a registered trademark of
Ruwisch & Kollegen GmbH.
Other product and brand names mentioned herein
may be the trademarks or registered trademarks
of their respective owners.
ScanSoft and Dragon NaturallySpeaking are the
trademarkes or registerd trademarks of ScanSoft, Inc
Main Features
9
1
1
2
3
4
5
6
7
8
9
0
!
@
#
$
%
-
)
(
*
&
^
2
1 MIC (Microphone) jack
2 Built-in stereo microphone
3 INDEX/2 button
4 DISPLAY/MENU/SET button
5 FOLDER/REPEAT/3 button
6 ERASE button
7 VOL (+) button
8 VOL (–) button
9 FF (Fast Forward) button
0 PLAY button
! REW (Rewind) button
@ STOP button
# REC (Record) button
$ Display (LCD panel)
% Record/Play indicator lamp
^ Built-in speaker
& HOLD switch
* EAR (Earphone) jack
( Strap Hole
) Battery cover
- Cradle attachment point/PC (USB)
terminal
Identification of Parts
Identification of Parts
10
1
0
1
2
3
4
5
6 7
!
9
8
@
1 Battery indicator
2 VCVA (Variable Control Voice Actuator)
indicator
3 Timer recording display
4 Alarm indicator
5 Microphone sensitivity display
6 Stereo display
7 Record mode indicator
8 Current file number
9 Total number of recorded files in the folder
0 Erase lock indicator
! Repeat play indicator
@ Character Information display
Identification of Parts
Identification of Parts
Display (LCD Panel)
11
1
3
1
2
Inserting Batteries
Inserting Batteries
1
Lightly press down on the arrow and slide the
battery cover open.
2
Insert two AAA alkaline batteries, observing the
correct polarity.
3
Close the battery cover completely.
Replacing batteries
The battery indicator on the display changes as the batteries
lose power.
➜ ➜ ➜
When appears on the display, replace the batteries as
soon as possible.
When the batteries are too weak, the recorder shuts down
and “BATTERY LOW” appears on the display. AAA alkaline
batteries are recommended.
An optional Ni-MH Rechargeable Battery from Olympus
can be used for the recorder (☞ P.117).
....................................................................................................................................................
Notes
• Be sure to stop the recorder before replacing the batteries. Unloading the batteries while the recorder is
in use may corrupt the file. If you are recording into a file and the batteries run out, you will lose your
currently recorded file because the file header will not be able to close. It is crucial to change the batteries
once you see only one Hash mark in the battery icon.
• Be sure to replace both batteries at the same time.
• Never mix old and new batteries, or batteries of different types and/or brands.
• If it takes longer than 1 minute to replace dead batteries, you may have to reset the time when you load
fresh batteries (☞ P.14).
• Remove the batteries if you are not going to use the recorder for an extended period of time.
12
1
Power Supply
When the recorder is not used, setting it to HOLD turns off the recorder, suppressing the
consumption of the battery to a minimum. Even if the power is turned off, the existing data,
settings of each mode, and clock setting will be maintained. To turn the power on, cancel the
hold switch.
Turning Off the Power
Move the HOLD switch to the HOLD
position while the recorder is not in
operation.
After “HOLD” is displayed, flashing for 2
seconds, the display will turn off.
Turning On the Power
Release the HOLD switch of the recorder.
Power Supply
13
1
Hold
Hold
Setting the HOLD switch to the HOLD position.
If you set the recorder to HOLD status by sliding the
HOLD switch in the direction of the arrow, the current
conditions will be preserved, and all buttons and switches
except the HOLD switch will be disabled. This feature is
useful when the recorder has to be carried in a bag or
pocket.
Remember to reset the HOLD switch when
using the recorder.
....................................................................................................................................................
Notes
• The display will flash if the switch is moved to hold in the stop status. At this time, if any button is pressed
the clock display will flash for about 2 seconds, but will not operate.
• If the switch is moved to hold during playback (or recording), the playback (recording) status will stay and
cannot be operated.
(When playback has ended and the recording has ended due the remaining memory being used up, it will
be in the stop state.)
• The alarm will sound at the scheduled time even if the recorder is set to hold. The recorder begins to play
the file associated with the alarm when you press any button.
• Recording will start when the set time of the timer recording comes even while in hold.
14
1
If you have set the time and date, information as to when an audio file is recorded is stored
automatically with that file. The time and date should be set to ease file management tasks.
Also, it is required when performing timer recording (☞ P.28) and alarm playback (☞ P.48).
The hour indicator will flash automatically when you load batteries before using the
recorder for the first time, or after the recorder hasn’t been used for a long time.
Proceed from step 1.
Setting Time/Date (TIME&DATE)
Setting Time/Date (TIME&DATE)
STOP button
(Exits the menu)
MENU/SET
button
(Accepts a choice
and moves on to
the next item)
2 button
(Alters a choice)
3 button
(Alters a choice)
PLAY button
(Switching the
data displayed.)
1
Set the hour.
1 Press the 3 button or 2 button to set
the hour.
2 Press the MENU/SET button to accept
the hour.
• You can choose between 12 and 24 hour
display by pressing the PLAY button while
setting the hour and minute.
Example: 5:45 P.M.
5:45 PM ←→ 17:45
(Initial setting)
2
Set the minute.
1 Press the 3 button or 2 button to set
the minute.
2 Press the MENU/SET button to accept
the minute.
3
Set the year.
1 Press the 3 button or 2 button to set
the year.
2 Press the MENU/SET button to accept
the year.
• You can choose the order of the year,
month, day by pressing the PLAY button
while setting them.
15
1
1
2
Setting Time/Date (TIME&DATE)
Changing the Time/Date
6
Press the STOP button to close the
menu.
When the date is confirmed, the recorder’s
clock will start to move. Set the time
according to the time signal and press the
MENU/SET button.
........................................................................
Note
If you press the STOP button during the setup
operation, the recorder will save the items that
were set to that point.
Example: January 14, 2005
1M 14D 2005Y
(Initial setting)
↓
14D 1M 2005Y
↓
2005Y 1M 14D
4
Set the month.
1 Press the 3 button or 2 button to set
the month.
2 Press the MENU/SET button to accept
the month.
5
Set the date.
1 Press the 3 button or 2 button to set
the date.
2 Press the MENU/SET button to accept
the date.
1
Press the 3 or 2 button in the sub
menu screen, and select the
“TIME&DATE”.
See ☞ P.17 and 19 regarding the sub menu.
2
Press the MENU/SET button.
Time/Date screen appears. The hour
indicator flashes, indicating the start of the
Time/Date setup process.
Follow the same steps starting at step 1 in “Setting Time/Date”
(☞ P.14).
2
16
Menu Setting Method
Each item of the menu list (☞ P.18, 19) can be set by the following method.
2,4
1,3,5
6
Menu Setting Method
2 Menu Setting
Main Menu Setting
1
Press and hold the MENU/SET
button for 1 second or longer.
The main menu opens.
2
Press the 3 or 2 button to
move to the item to be set.
3
Press the MENU/SET button.
Moves to the setting of the selected
item. When
◊
SUB MENU is selected,
move to the item of the sub menu.
4
Press the 3 or 2 button to
change the setting.
5
Press the MENU/SET button to
complete the setup screen.
6
Press the STOP button to close
the main menu.
2
17
2,4,
6
8
1,3,
5,7
Sub Menu Setting
1
Press and hold the MENU/SET
button for 1 second or longer.
The main menu opens.
2
Press the 3 or 2 button on the
setting screen of the main menu,
and select the “
◊
SUB MENU”.
3
Press the MENU/SET button.
The sub menu opens.
4
Press the 3 or 2 button to move
to the item to be set.
5
Press the MENU/SET button.
Moves to the setting of the selected
item. When ◆MAIN MENU is selected,
move to the item of the main menu.
6
Press the 3 or 2 button to
change the setting.
7
Press the MENU/SET button to
complete the setup screen.
8
Press the STOP button to close
the sub menu.
Menu Setting Method
2
18
Main Menu
Press and hold the MENU/SET button for 1secomd or longer.
Menu List
....................................................................................................................................................
Notes
• If you press the STOP button or the REC button, during a menu setup operation, the recorder will stop and
apply the items that were set to that point. The set contents of the timer recording will be set, and goes to OFF.
• The recorder will stop if you leave it idle for 3 minutes during a menu setup operation, when a selected
item is not applied.
P.22
P.25
P.55
P.45
P.44
P.39
P.41
P.48
P.28
P.17
P.23
Switches to the sub menu.
Playback Speed Setting Screen
Menu List
Press and hold the MENU/SET
button for 1 second or longer.
Press the 3 or 2 button.
Press the MENU/SET button.
Initial setting
2
19
P.16
P.14
P.59
P.58
P.60
P.61
P.64
P.68
P.
111
....................................................................................................................................................
Notes
• If you press the STOP button or the REC button, during a sub menu setup operation, the recorder will stop
and apply the items that were set to that point.
• The recorder will stop if you leave it idle for 3 minutes during a sub menu setup operation, when a
selected item is not applied.
Sub Menu
Time/Date setting.
In order of hour, minute, year, month and day.
Switches to the main menu.
LCD contrast adjustment
Folder naming.
Assigning file comments.
Menu List
Press the 3 or 2 button.
Press the MENU/SET button.
Initial setting
20
3
Recording
The recorder provides five folders, A, B, C, D and E, and each message recorded in a
folder is saved as a Digital Speech Standard (DSS) file or a Windows Media Audio (WMA) file.
These five folders can be selectively used to distinguish the kind of recording; for example,
Folder A might be used to store private information, while Folder B might be dedicated to
holding business information. Up to 199 messages can be recorded per folder (☞ P.61).
Stereo recording is possible, only when set to stereo HQ and stereo SP mode.
Recording
3 About Recording
1
Press the FOLDER button to
choose a folder.
The folder name is displayed.
a Total number of recorded files in the
folder
b Current file number
c Current folder
2
Press the REC button to start
recording.
The record/play indicator lamp glows red.
Turn the built-in stereo microphone in the
direction to be recorded. The display
changes depending on the recording
mode (☞ P.22).
d Current recording mode
e Recording time
f Remaining recording time
3
Press the STOP button to stop
recording.
Display in the
stereo recording
mode
Display in the
monaural
recording
1
2
3
Built-in stereo
microphone
21
3
Recording functions
Pause
Press the REC button while recording.
➥
“REC PAUSE” will flash on the display.
• The recorder will time out after 2 hours when left
in “REC PAUSE”.
Resume Recording
Press the REC button again.
➥
Recording will resume at the point of
interruption.
Notes
• To ensure recording from the beginning, start
speaking after you see the red record/play
indicator lamp on.
• A beep will sound when remaining recording time
reaches 60 seconds, 30 seconds, and 10
seconds while recording.
•“MEMORY FULL” or “FOLDER FULL” will be
displayed when the memory or folder capacity is
full. Delete any unnecessary files before
recording any further (☞ P.51) or transfer voice
files to your computer using DSS Player Software
(☞ P.86).
• DSS format in SP and LP mode recording, and
WMA format in stereo HQ and stereo SP and
HQ mode recording.
• While recording, pressing the PLAY button stops
recording and plays back the current file.
Recording
22
3
3
1,2,4
5
....................................................................................................................................................
Note
When a meeting and lecture is to be recorded clearly, set other than LP mode to record.
Recording Modes (REC MODE)
The recording mode can be chosen from Stereo HQ (stereo high quality sound recording) and
Stereo SP (stereo standard recording), HQ (high quality sound recording), SP (standard
recording), and LP (long-term recording).
Recording Modes (REC MODE)
1
Press and hold the MENU/SET
button for 1 second or longer.
“REC MODE” will be displayed on the
screen (☞ P.16,18).
2
Press the MENU/SET button.
The recording mode setup process
begins.
3
Press the 3 or 2 button to
choose from “STEREO HQ”,
“STEREO SP”, “HQ”, “SP” and
“LP”.
4
Press the MENU/SET button to
complete the setup screen.
5
Press the STOP button to close
the main menu.
23
3
1,3,5
6
2,4
Using the Variable Control Voice Actuator (VCVA)
When the microphone senses that sounds have reached a preset threshold volume level, the
built-in Variable Control Voice Actuator (VCVA) starts recording automatically, and stops when
the volume drops below the threshold level.
The VCVA feature extend recording time and conserve memory by turning off recording during
silent periods. This helps make the playback, with no lulls or dead space, more efficient and
convenient.
Using the Variable Control Voice Actuator (VCVA)
1
Press and hold the MENU/SET
button for 1 second or longer.
The main menu opens (☞ P.16,18).
2
Press the 3 or 2 button to choose
“VCVA”.
3
Press the MENU/SET button.
The VCVA setup process begins.
4
Press the 3 or 2 button to choose
between “ON” and “OFF”.
ON: Will start recording in VCVA
mode.
OFF: Will resume recording in normal
mode.
5
Press the MENU/SET button to
complete the setup screen.
6
Press the STOP button to close
the main menu.
When “ON” is selected, a VCVA
indication will be displayed on the
screen.
24
3
7
Using the Variable Control Voice Actuator (VCVA)
Using the Variable Control Voice Actuator (VCVA)
....................................................................................................................................................
Notes
• The start/stop actuation level also varies depending on the selected microphone sensitivity mode (☞ P.25).
• If the starting level is not adjusted within 5 seconds, the display will return to the previous.
• If the surrounding noise is loud, the starting sensitivity of the VCVA can be adjusted according to the
recording situation.
• To ensure successful recordings, prior testing and adjustment of the start/stop actuation level is
recommended.
7
Press the REC button to start
recording.
When the sound volume is lower than
the preset threshold sound level,
recording automatically stops after 1
sec approximately, and “STANDBY”
flashes on the display. The record/play
indicator lamp glows when recording
starts and flashes when recording
pauses.
Adjust the start/stop actuation level
Press the FF or REW button to
adjust the pause sound level during
recording.
The VCVA level can be set to any of 15
different values. The higher the value, the
more sensitive the recorder to sounds. At
the highest value, even the faintest sound
will activate recording.
The VCVA pause sound level can be
adjusted according to the ambient
(background) noise.
a Level meter (varies according to the
sound volume being recorded)
b Start level (moves to the right/left
according to the set level)
25
3
2,4
1,3,5
6
....................................................................................................................................................
Note
When the speakers voice is to be recorded clearly, set to dictation mode and move the built-in stereo
microphone close to the speaker’s mouth (5 to 10 cm) and record.
Microphone Sensitivity (MIC SENSE)
Microphone sensitivity is adjustable to meet recording needs.
Microphone Sensitivity (MIC SENSE)
1
Press and hold the MENU/SET
button for 1 second or longer.
The main menu opens (☞ P.16,18).
2
Press the 3 or 2 button to choose
“MIC SENSE”.
3
Press the MENU/SET button.
The microphone sensitivity setup
process begins.
4
Press the 3 or 2 button to choose
between “CONFERENCE” and
“DICTATION”.
CONFERENCE:
High-sensitivity mode that
records sounds in all directions.
DICTATION:
Low-sensitivity mode suited for
dictation.
5
Press the MENU/SET button to
complete the setup screen.
6
Press the STOP button to close
the main menu.
26
3
The external microphone and other devices can be connected and the sound can be recorded.
Connect as follows by the device to be used.
Recording with External Microphone
Connect the external microphone to the
microphone jack of the recorder.
When the external microphone is connected to the
microphone jack of the recorder, the built-in microphone will
not operate.
Applicable external microphones
● Noise-Cancellation monaural microphone: ME12
(optional)
(Dictation microphone)
This microphone is used to record your own voice while
minimizing surrounding noise and suits for voice recognition.
● Stereo microphone: ME51S (optional)
The high fidelity of the stereo recording, which only stereo can
perform. Furthermore, clear sound quality with less noise is
obtained with the WMA format. Stereo recording is possible only
when set at Stereo HQ and Stereo SP mode.
Recording the sound of other devices
with this recorder
The sound can be recorded when connecting to the audio
output terminal (stereo mini plug) of the other device, and
the microphone jack of the recorder with the connecting
cord (optional KA333) for dubbing.
Recording from External Microphone or Other Devices
V
O
L
U
M
E
EAR
M
E
EAR
To audio output
terminal of other
devices
To MIC
(microphone) jack
Recording from External Microphone or
Other Devices
27
3
....................................................................................................................................................
Notes
• The input level cannot be adjusted on this recorder. When you connect the recorder to an external device,
execute a test recording and adjust the output level of the external device.
• A microphone with plug-in power, which receives the power supply from this recorder, can be used.
• Please do not insert/remove the cord to/from the jack of this recorder while recording.
• When the external stereo microphone is inserted while set in HQ, SP, and LP modes, it enables recording
only with the L Channel microphone.
• When the monaural microphone is inserted into the microphone jack in Stereo HQ and Stereo SP mode,
the sound will be recorded only in the L Channel.
To audio input
terminal of other
devices
To EAR
(earphone) jack
Recording from External Microphone or Other Devices
Recording the sound of this recorder
with other devices
The sound of this recorder can be recorded to other devices
when connected to the audio input terminal (stereo mini plug)
of other devices and the earphone jack of this recorder, with
the connecting cord (optional KA333) for dubbing.
28
3
Timer Recording (TIMER REC)
Timer recording is the function to execute a recording at a set time.
Timer Recording (TIMER REC)
2,4
3,5
1
1
Press the FOLDER button to
select the folder in which the
recording will be saved.
2
Press and hold the MENU/SET
button for 1 second or longer.
The main menu opens (☞ P.16,18).
3
Press the 3 or 2 button to choose
“TIMER REC”.
4
Press the MENU/SET button.
The timer recording setup process
begins.
5
Press the 3 or 2 button to choose
“ON”.
Press the MENU/SET button to choose
“OFF”, the timer recording will be
canceled and the screen returns to the
main menu.
29
3
Timer Recording (TIMER REC)
6
6
Press the MENU/SET button.
Start time setting will begin.
7
Start time setting.
1 Press the 3 button or 2 button to
set the hour.
2 Press the MENU/SET button to
accept the hour.
3 Press the 3 button or 2 button to
set the minute.
4 Press the MENU/SET button to
apply the minute setting and it will
move to the end time setting.
8
Setting end time.
1 Press the 3 button or 2 button to
set the hour.
2 Press the MENU/SET button to
accept the hour.
3 Press the 3 button or 2 button to
set the minute.
4 Press the MENU/SET button to
apply the current minute setting and
move to the recording mode.
30
3
Timer Recording (TIMER REC)
9
Recording mode setting.
1 Press the 3 button or 2 button to
set the recording mode.
2 Press the MENU/SET button to
accept the recording mode.
When accepting the recording mode,
if the remaining memory is insufficient
for the reserved time, “MEMORY
FULL, CONTINUE?” will be displayed.
Press the 3 or 2 button to choose
“YES” or “NO”.
YES: If the setting is continued, the
remaining memory will be used
up while recording in timer, then
the recording will end.
NO: Returns to Procedure 5 (“ON”
flashes on the display).
10
Press the 3 or 2 button to
choose between “ONE TIME”
and “EVERY DAY”.
ONE TIME:
Records only once at the
specified time.
EVERY DAY:
Records every day at the
specified time.
11
Press the MENU/SET button to
complete the setup screen.
The duration, setting time, and timer
display, will be displayed in ( ) for 5
seconds.
10
11
Timer Recording (TIMER REC)
31
3
12
12
Press the STOP button to close the main menu.
................................................................................................
Notes
• If the recorder is in use at the preset start time, the timer recording
will start directly after stopping the recorder.
• Timer recording will start even the recorder is put to HOLD.
• Recording will start even though the alarm playback is set at the
time the timer recording was set.
• If start and end time of timer recording are set at the same time, the
recording will not be executed.
• If the batteries run out while recording based on the timer setting,
the recorder will stop recording. Check the battery power before
starting the timer recording.
Timer Recording (TIMER REC)
32
3
Connect the earphone to the EAR jack on the recorder.
After recording is started, you can hear the sound being recorded
through the earphone.
If the earphone is connected, no sound will come from the speaker.
.......................................................................................................
Notes
• Recording level cannot be controlled using the volume button.
• When using the earphones, do NOT set the volume too high. Listening at
very high volume may lead to hearing loss.
Listening While Audio is Recorded (Recording Monitor)
Listening While Audio is Recorded
(Recording Monitor)
If you start recording after inserting the earphone into the EAR jack on the recorder, you can
hear the sound being recorded. The sound volume on the recording monitor can be adjusted
by pressing the VOL (+) or VOL (–) button.
33
4
1
Press the FOLDER button to
choose folder.
2
Press the FF or REW button to
choose the file that you want to
play.
If you keep pressing the FF or REW
button in stop mode, the recorder
continuously skips to the beginnings of
files.
3
Press the PLAY button to start
playback.
The record/play indicator lamp glows
green.
a Current playback time
b Total recording time of the file being
played
4
Press the VOL (+) or VOL (–)
button to select the proper
sound volume.
The display shows the volume level.
You can choose between 0 to 30.
5
Press the STOP button at any
point you want to stop the
playback.
Resume playback by pressing PLAY
button again.
3
1
4
2
5
4 About Playback
Playing
Playing
34
4
Playing
Playing
Save Function of the Playback End Position
When the STOP button is pressed during playback and it stops in the middle
of the file, the stop position is memorized automatically. Even when it moves
to other files with the FF or REW button, playback can be resumed from the
place which was interrupted previously and returns to the memorized stop
position easily with the FF or REW button. When it returns to the stop position
with the FF or the REW button, “PREVIOUS STOP POINT” will be displayed
in the display.
And the file playback and stopping changes the end position and memorize
the stop position as new end position.
▲▲▲▲
End Position
File A Head
Position
File B Head
Position
File C Head
Position
Cuing
is
possible
Cuing
is
possible
Cuing
is
possible
Cuing
is
possible
File A File B File C
....................................................................................................................................................
Note
The playback ending position will be canceled, if recording, PC connection, changing folders, file deletion
and battery removal are executed.
35
4
Playing
Playback
functions
Fast
Playback
Slow
Playback
Cue
(CUE)
Review
Skipping to
beginning
of a file*
4
Fast
forward*
6
rewind*
6
*
7
within a set
time
Operation
Press the PLAY button once while playing a file.*
1
➥ The recorder plays at a set speed. The playback speed can be
set from 0.5 to 2 times (☞ P.39).
Hold the FF button while playing a file.*
2
➥ The recorder stops when it reaches the end of the file. Continue
pressing the FF button to proceed with the cue from the
beginning of the next file.*
3
Hold the REW button while playing a file.*
2
➥ The recorder stops when it reaches the beginning of the file.
Continue pressing the REW button to proceed with the review
from the end of the previous file.*
3
Press the FF button during playback, fast playback, or slow
playback.
➥ The next file is cued and playback starts at the original speed.*
5
Press the REW button during playback, fast playback, or slow
playback.
➥ The file being played is cued and playback starts at the original
speed.*
5
Press the REW button 2 times during playback, for fast playback or
slow playback.
➥ The previous file is cued, and playback starts at the original
speed.*
5
Press the FF button during playback, fast playback, or slow
playback.
➥ The file during playback fast forwards for the set time, and
playback starts at the original speed.*
8
Press the REW button during playback, fast playback, or slow
playback.
➥ The file during playback rewinds for the set time, and playback
starts at the original speed.*
8
*
9
How to Cancel
Press the PLAY
button.
➥ Playback
returns to
normal rate.
Release the FF
button.
➥ Replays at the
original speed.
Release the REW
button.
➥ Replays at the
original speed.
36
4
Playing
*
1 The above-mentioned playback functions and the insertion of index mark (
☞
P.56) are also enabled
during fast/slow playback as well as normal playback.
*
2 When pressing the FF or REW button continuously while stopped, the cue of the file start position and
previous file end position(☞ P.34) will be executed continuously (skip/reverse skip).
*
3
When the index mark is shown in the middle of a file, it will stop temporarily in the position of the index mark.
*
4
When the skip interval is set to file skip in the menu setting (☞ P.45) . It is set to file skip in the initial setting.
*
5 When the index mark is shown in the middle of a file, playback starts at the position of the index mark.
*
6 When the skip interval is set at other than file skip in the menu setting.
*
7 When playback was set to “OFF” previously in the menu setting (☞ P.44).
*
8
When the index mark is shown before the set time the playback will start in the position of the index mark.
*
9 If both of the skip interval and the previous playback are set, the time setting for previous playback
overrides the time setting for skip interval.
....................................................................................................................................................
Notes
• When the noise cancel function (☞ P.47) is set to “LOW” or “HIGH”, the playback speed cannot be set.
• When the previous playback is set, the FF button is disabled and will not skip to the cue of the file start
position or the index mark position.
Playing
37
4
Playing
Last File End
When the following operation is executed and it reaches to the end of the
last file during playback, “END” will be displayed and flashing for 5 seconds
in the display.
• Press the FF button (skip)
• Press the FF button continuously (CUE)
• Playback last file
Operating the FF or REW button while “END” is displayed and flashing, the following operation
can be executed.
Operation
Press the REW button continuously.
➥ Continuously rewind (REVIEW) from the last file end (☞ P.35).
Set other than file skip in the skip interval or, press the REW button when the previous playback is set to
ON.
➥ The nearest of the set time interval or index mark, or only the return time of the previous playback,
will start the playback in reverse skip.
Set the file skip in the skip interval or, press the REW button when the previous playback is set to OFF.
➥ The playback will start in reverse skip; either at the nearest last file start position or the index mark.
Press the FF button.
➥ Skips to the starting position of the head file, and stops.
Press the FF button continuously.
➥ It skips continuously from the starting position of the head file, and it will stop if the REW button is
released.
Note
After “END” is displayed for 5 seconds and flashing, it returns to the start position of the last file and stop.
38
4
An earphone can be connected to the
EAR jack of the recorder for listening.
When the earphone is used, the recorder
speaker will be switched-off.
Notes
• To avoid irritation to the ear, insert the earphone
after turn down the volume level.
• When you listen with the earphone during
playback, do not raise the volume too much. It
may cause hearing impairment and decrease in
hearing ability.
Playing
Playback through earphone
Playing
39
4
Changing the Playback Speed (PLAY SPEED)
The playback speed of the file can be changed from within 0.5 to 2 times speed. You have 2
options how to set the playback speed. Either during playback or through the menu.
1,3
2
Changing during playback
1
Press the PLAY button during
playback.
The current playback speed to be
changed will be flashing for 5 seconds.
2
Press the FF or REW button while
the flashing playback speed is
displayed, to change the playback
speed.
Playback speed can be changed by units
within 0.5 to 2 times speed for every 0.125
times. After that, the fast playback/slow
playback will be the set playback speed.
5 seconds after the setting, the playback
speed will be displayed and flashing. Also,
the playback speed in the menu setting will
be changed after the setting.
3
Press the PLAY button to return
to normal playback.
Changing the Playback Speed (PLAY SPEED)
....................................................................................................................................................
Notes
• When the noise cancel function (☞ P.47) is set to “LOW” or “HIGH”, the playback speed cannot be set.
• During fast playback/slow playback, it will be played back in monaural even though the file was recorded
in Stereo HQ or Stereo SP mode.
40
4
2,4
1,3,5
6
Changing the Playback Speed (PLAY SPEED)
Changing the Playback Speed (PLAY SPEED)
Changing from the menu
1
Press and hold the MENU/SET
button for 1 second or longer.
The main menu opens (☞ P.16,18).
2
Press the 3 or 2 button to
choose “PLAY SPEED”.
3
Press the MENU/SET button.
The playback speed setup process
begins.
4
Press the 3 or 2 button to set
the playback speed.
Playback speed can be changed by
units within 0.5 to 2 times speed for
every 0.125 times.
5
Press the MENU/SET button
to complete the setup screen.
After that, the fast playback/slow
playback will be the set playback
speed.
6
Press the STOP button to close
the main menu.
41
4
2,4
1,3,5
6
Continuous Playback (ALL PLAY)
This function allows you to listen to all your recordings of one folder in one go without any stop
between the files.
Continuous Playback (ALL PLAY)
1
Press and hold the MENU/SET
button for 1 second or longer.
The main menu opens (☞ P.16,18).
2
Press the 3 or 2 button to
choose “ALL PLAY”.
3
Press the MENU/SET button.
The continuous playback setup
process begins.
4
Press the 3 or 2 button to
choose between “ON” and
“OFF”.
ON: Continuous playback.
OFF: Returns to playback with stop
between single files.
5
Press the MENU/SET button
to complete the setup screen.
6
Press the STOP button to close
the main menu.
....................................................................................................................................................
Note
After playback of last file in the folder, “END” appears on the screen and playback stops automatically.
42
4
2
1
Repeat Playback
This function enables repeated playback of part of the file being played. If the continuous
playback function is used together, two or more files can be repeatedly replayed as long as
they are in the same folder.
Repeat Playback
1
Choose the file for Repeat
Playback, and press the PLAY
button.
File playback begins.
2
Press the REPEAT button
briefly at the point you want to
start Repeat Playback.
“REPEAT END?” flashes until you
designate the end point.
Even while “REPEAT END?” is
flashing, changing the playback
speed (☞ P.39), fast forward, rewind
and cue (☞P.35) can be executed the
same as during normal playback, and
it can be advanced quickly to the end
position. Also, when it reaches to the
end of the file, which will become the
end position, then repeat playback
will start.
43
4
3
Repeat Playback
3
Press the REPEAT button briefly
again at the position you want
Repeat Playback to end.
The recorder repeatedly plays back the
section between the start and the end
positions until you cancel Repeat
Playback.
If continuous playback is set to ON
(☞ P.41), the end position can be set
to the extent of the last file in the
folder.
The playback speed, index mark
insertion/removal, and noise cancellation
can be set during continuous playback
as well as normal playback.
4
Cancel the continuous playback
function.
• Pressing the REPEAT button briefly
will return to the normal playback.
• Pressing the STOP button will cancel
the continuous playback function and
stop the playback.
....................................................................................................................................................
Note
To use this function, briefly press the REPEAT button. If you hold it 1 second or longer, the Moving Files
screen appears (☞ P.65).
44
4
1
Press and hold the MENU/SET
button for 1 second or longer.
The main menu opens (☞ P.16,18).
2
Press the 3 or 2 button to choose
“BACK SPACE”.
3
Press the MENU/SET button.
The auto backspace review setup
process begins.
4
Press the 3 or 2 button to choose
from “OFF”, “1 SEC SKIP” and “2
SEC SKIP”.
OFF: Continuous playback.
1 SEC SKIP: Start playback from 1
second before.
2 SEC SKIP: Start playback from 2
second before.
5
Press the MENU/SET button to
complete the setup screen.
6
Press the STOP button to close
the main menu.
7
Press the REW button while the
file is being replayed.
Playback starts at the set point of
seconds before.
2,4
1,3,5
7
6
Auto Backspace Review (BACK SPACE)
To ease the reviewing of a voice file you can set an auto backspace for either 1 or 2 seconds,
so you will listen to the last phrase repeatedly.
Auto Backspace Review (BACK SPACE)
....................................................................................................................................................
Note
If “1 SEC SKIP” or “2 SEC SKIP” is set at the previous playback, and even though the fast forward button is
pressed, it does not reverse skip to the cue or the index mark position. Reverse skip is executed for only the
set time (1 or 2 seconds).
45
4
1
Press and hold the MENU/SET
button for 1 second or longer.
The main menu opens (☞ P.16,18).
2
Press the 3 or 2 button to
choose “SKIP SPACE”.
3
Press the MENU/SET button.
The skip interval setup process
begins.
4
Press the 3 or 2 button to set
the skip interval.
FILE SKIP:
Skips from file to file.
10SEC, 30SEC, 1MIN, 5MIN, 10MIN:
Skips with the set time interval
and playback will start.
Skip Interval Setting (SKIP SPACE)
This function allows you to define a certain time interval for skipping within a file while playback.
2,4
1,3
Skip Interval Setting (SKIP SPACE)
46
4
Skip Interval Setting (SKIP SPACE)
6
5
7
5
Press the MENU/SET button to complete the
setup screen.
6
Press the STOP button to close the main menu.
7
Press the FF or REW button while the file is
being replayed.
Skip or reverse skip is executed for the set time and
playback will start.
....................................................................................................................................................
Note
If both skip interval and auto backspace review are set, the previous playback setting will have priority for
the reverse skip when the REW button is pressed.
Skip Interval Setting (SKIP SPACE)
47
4
1,2
Noise Cancel Function
If recorded audio is difficult to understand because of noisy surroundings, adjust the Noise
Cancel setting level. Noise will be reduced in the file when its played back for better sound
quality.
Noise Cancel Function
1
Press and hold the MENU/SET
button for 1 second or longer
while the file is playing.
Displays currently set Noise Cancel
level.
2
Press the MENU/SET button
again to choose a noise cancel
level.
The levels switch in the following
rotation, “OFF” “LOW” “HIGH”.
If the Noise Cancel level is set to “LOW”
or “HIGH”, the level setting is displayed
for 5 seconds when a file is played back.
To change the Noise Cancel level setting,
press the MENU/SET button while the
level setting is displayed.
....................................................................................................................................................
Notes
• If you set it to “LOW” or “HIGH”, the display flashes the Noise Cancel level for about 5 seconds when a file
is played back.
• If you set Noise Cancel to “LOW” or “HIGH”, the setting remains valid until it’s set to “OFF”.
• Noise cancel cannot be used during fast playback/slow playback (☞ P.35).
• If the noise cancel is set to the file recorded in Stereo HQ or Stereo SP mode, it will be played back in
monaural.
48
4
3,5
2
4,6
1
Alarm Playback Function (ALARM)
The alarm playback function can be set to play a selected file at a pre-set time.
Alarm Playback Function (ALARM)
1
Press the FOLDER button to
choose a folder.
2
Press the FF or REW button to
choose the file to be played when
the alarm sounds.
3
Press and hold the MENU/SET
button for 1 second or longer.
The main menu opens (☞ P.16,18).
4
Press the 3 or 2 button to choose
“ALARM”.
5
Press the MENU/SET button.
The alarm playback setup process
begins.
6
Press the 3 or 2 button to choose
between “ON” and “OFF”.
ON: Enables alarm playback.
OFF: Disables alarm playback.
49
4
7,9,11
8,10
12
Alarm Playback Function (ALARM)
7
Press the MENU/SET button
to complete the setup screen.
When you choose ON, the hour
indicator flashes.
When you choose OFF, the alarm
indicator disappears and finishes
with step 12.
8
Press the 3 or 2 button to set
the hour.
9
Press the MENU/SET button
to accept the hour.
The minute indicator flashes.
10
Press the 3 or 2 button to set
the minute.
11
Press the MENU/SET button
to accept the minute.
12
Press the STOP button to
close the main menu.
An alarm tone will sound at the scheduled
time. Press any button while the alarm
sounds to play the file you associated with
the alarm.
50
4
To enable alarm sound only
To set an alarm without audio playback, set
the alarm while an empty folder is selected.
• Start setting from step 3 (☞ P.48) of “Alarm
Playback Function”.
• When alarm sound goes at the preset
time, pressing any button stops the sound.
Notes
• The alarm playback function can be set for only
one file at a time.
• The alarm will sound at the scheduled time every
day unless the alarm playback setting is cleared.
• If you wish to change the file for alarm play, first
turn the alarm settings “OFF”, then make any
desired new alarm settings.
• The alarm will sound for 5 minutes and then stop.
• If the recorder is in use at the scheduled time,
the alarm will sound after the operation is
finished.
• The alarm will sound at the scheduled time even
if the recorder is set to hold. The recorder begins
to play the file associated with the alarm when
you press any button.
• The alarm playback setting is cleared if the
selected file is erased.
• When the timer recording is set, the timer
recording setting has priority.
Alarm Playback Function (ALARM)
Alarm Playback Function (ALARM)
51
5
Erasing
1,4
2
3
Erasing
Erasing One File at a Time
A selected file can be erased from a folder.
5 Other functions
1
Press the FOLDER button to
choose a folder.
2
Press the FF or REW button to
choose the file you want to erase.
a File to be erased
3
Press the ERASE button.
“CANCEL” is flashing.
4
Press the 3 button to choose the
“START”.
“START” is flashing. When the 2 button
is pressed, it will return to the flashing
display of “CANCEL”.
52
5
Erasing
{
5
5
Press the MENU/SET button
while “START” flashing.
The display changes to “FILE ERASE!”
and erasing will start.
“ERASE DONE” is displayed when the file
is erased. File numbers will be reassigned
automatically.
Erasing
....................................................................................................................................................
Notes
• An erased file cannot be restored.
• The file set to erase lock will not be erased (☞ P.55).
• If operation is not executed for 8 seconds during the setting, it will return to the stop status.
• Completion of erasing may take 10 seconds. Never do anything during this period because data may be
corrupted. Removing or setting batteries is not permissible, whether or not the batteries are set in the
recorder.
53
5
1,3
2
Erasing
Erase All Files from a Folder
All files in a folder can be erased simultaneously, except for locked files (☞ P.55).
1
Press the FOLDER button to
choose the folder you want to
erase all files.
a Folder from which to erase files
2
Press the ERASE button for 3
seconds or longer.
“CANCEL” is flashing.
3
Press the 3 button to choose the
“START”.
“START” is flashing. When the 2 button
is pressed, it will return to the flashing
display of “CANCEL”.
54
5
4
Press the MENU/SET button
while “START” flashing.
The display changes to “ALL ERASE!”
and erasing will start.
“ERASE DONE” is displayed when the files
are erased. Locked files are reassigned file
numbers in ascending order.
{
4
Erasing
....................................................................................................................................................
Notes
• An erased file cannot be restored.
• The file set to erase lock will not be erased (☞ P.55).
• If operation is not executed for 8 seconds during the setting, it will return to the stop status.
• Completion of erasing may take 10 seconds. Never do anything during this period because data may be
corrupted. Battery removal setting/removal are not permissible, whether or not the battery is set in the
recorder.
Erasing
55
5
3,5,7
2
4,6
8
1
Locking Files (LOCK)
Locking a file keeps important data from being accidentally erased.
Locked files are not erased when you choose to erase all files from a folder (☞ P.53).
Locking Files (LOCK)
1
Press the FOLDER button to
choose a folder.
2
Press the FF or REW button to
choose the file you want to
lock.
3
Press and hold the MENU/SET
button for 1 second or longer.
The main menu opens (☞ P.16,18).
4
Press the 3 or 2 button to choose
“LOCK”.
5
Press the MENU/SET button.
The file locking setup process begins.
6
Press the 3 or 2 button to
choose between “ON” and
“OFF”.
ON: Locks the file and prevents it
from being erased.
OFF: Unlocks the file and allows it to
be erased.
7
Press the MENU/SET button
to complete the setup screen.
8
Press the STOP button to close
the main menu.
56
5
1
2
4
Index Marks
Index Marks
Setting an Index Mark
1
Press the INDEX button during
recording or playback to set an
index mark.
An index number appears on the
display.
Locating an Index Mark
2
Hold the FF or REW button
while playing a file.
The recorder stops for 1 second when
it reaches the index mark.
Clearing an Index Mark
3
Locate the index mark you
want to clear.
4
Press the ERASE button while
the index number appears for
approximately 2 seconds on
the display.
The index mark is erased.
Index marks can be placed in a file during recording or playback to provide and quick and easy
way of keeping track of important sections in the file.
57
5
Index Marks
Notes
• Up to 16 index marks can be set in a file. Attempting to set more index marks will cause “INDEX FULL” to
appear on the display.
• Index marks cannot be set or cleared in a locked file (☞ P.55).
• In case of WMA files, index marks can only be placed in files recorded with Olympus recorders.
• If the REW button is pressed in the set status of “1 SEC SKIP” or “2 SEC SKIP” in the previous playback,
it will reverse skip for only the set time.
58
5
1,3
2,4
5
LCD Contrast Adjustment (CONTRAST)
If you find it difficult to read the display information due to lighting, temperature, or other
conditions, you can adjust the contrast using this function to easily see the LCD display (display
contrast).
Display contrast can be adjusted in 12 levels.
LCD Contrast Adjustment (CONTRAST)
1
Press the 3 or 2 button in the
sub menu screen, and select
the “CONTRAST”.
See ☞ P.17 and 19 regarding the sub
menu.
2
Press the MENU/SET button.
The LCD display contrast setup
process begins.
3
Press the 3 or 2 button to set
the contrast level.
You can adjust the LCD display
contrast level from 1 to 12.
(Initial setting ......6)
4
Press the MENU/SET button
to complete the setup screen.
5
Press the STOP button to close
the sub menu.
59
5
1,3
2,4
5
Backlight (BACKLIGHT)
The recorder display backlight is ON by default. The display will lit for about 10 seconds when
a button on the recorder is pressed. The backlight feature can be turned off from the menu.
Backlight (BACKLIGHT)
1
Press the 3 or 2 button in the
sub menu screen, and select
the “BACKLIGHT”.
See ☞ P.17 and 19 regarding the sub
menu.
2
Press the MENU/SET button.
The backlight setup process begins.
3
Press the 3 or 2 button to
choose between “ON” and
“OFF”.
ON: Backlight is enabled.
OFF: Backlight is disabled.
4
Press the MENU/SET button
to complete the setup screen.
5
Press the STOP button to close
the sub menu.
60
5
1,3
2,4
5
System Sounds (BEEP)
The recorder beeps to alert you to button operations or warn you of errors. System sounds
may be turned off.
System Sounds (BEEP)
1
Press the 3 or 2 button in the
sub menu screen, and select
the “BEEP”.
See ☞ P.17 and 19 regarding the sub
menu.
2
Press the MENU/SET button.
The system sound setup process
begins.
3
Press the 3 or 2 button to
choose between “ON” and
“OFF”.
ON: System sounds are enabled.
OFF: System sounds are disabled.
4
Press the MENU/SET button
to complete the setup screen.
5
Press the STOP button to close
the sub menu.
....................................................................................................................................................
Note
If the alarm playback function has been set, the alarm will sound at the scheduled time even if system
sounds are turned off.
5
61
1
Press the 3 or 2 button in the
sub menu screen, and select
the “FOLDER NAME”.
See ☞ P.17 and 19 regarding the sub
menu.
2
Press the MENU/SET button.
The folder name setup process
begins.
3
Press the 3 or 2 button to
choose the folder you want to
name.
4
Press the MENU/SET button to
accept the chosen folder.
a Current character being entered (a
space is highlighted and blinks.)
5
Press the 3 or 2 button to
choose characters.
The recorder assigns the following
buttons to inputting procedures.
1,3
2,4
Assigning Folder Names (FOLDER NAME)
Assigning Folder Names (FOLDER NAME)
The 5 folders on the recorder (Folder A to Folder E) can be easily renamed. The folder
name is limited to 12 characters each. Frequently used names such as “dictation (DICT.)”,
“meeting (MEETING)”and “(SCHEDULE)” are pre-set in a template.
5
62
Recorder buttons that are used to input characters
Assigning Folder Names (FOLDER NAME)
Button
MENU/SET
▲
▼
REW
ERASE
FF
PLAY
Push
Press once
Press and hold
Press once
Press and hold
Press once
Press and hold
Press once
----------
Press once
Press and hold
Press once
Press and hold
Action
To input the selected character and advance the input position.
Confirms folder name or file comment.
Forward to next character in the character list.
Scroll forward through the character list.
Backward to previous character in the character list.
Scroll backward through the character list.
Returns to previous character.
To delete the flashing character.
Switches between character groups (type).
Quickly cycles through the character groups (types).
Selects character to be input: skips ahead by 5 characters.
Quickly skips ahead in increments of 5 characters.
6
Use the two following methods to quickly find characters.
1 When the FF button is pressed, the displayed character group (example: Uppercase,
lowercase, template, symbols) will change, and you can then press the 2 or 3 buttons
to select characters.
2 Every time the PLAY button is pressed, it will skip ahead by 5 characters, so you can
quickly move closer to the character you want.
(Currently displayed character) = (Space) = DICT. = TO DO = A = F = K = P = U =
Z = a = f = k = p = u = z = 1 = 6 = , = ( = # = ^ = (Space) = DICT. = TO DO...
If you press the PLAY button while a character other than one of the above appears, you will skip to the
closest forward character in the above cycle.
Pressing the PLAY button again will then cycle through every fifth character as shown above.
example:
If you press the PLAY button while “MEMO” is displayed, “TO DO” will appear.
If you press the PLAY button while “B” is displayed, “F” will appear.
Assigning Folder Names (FOLDER NAME)
5
63
Assigning Folder Names (FOLDER NAME)
Action
DICT. = MEETING = MEMO = NOTE = IDEA = TO DO = REMINDER
= LECTURE = SCHEDULE = ARCHIVE
TOP PRIORITY = PRIORITY = IMPORTANT = CONFIDENTIAL =
PRIVATE = DON’T FORGET =THINGS TO DO = MESSAGE =
CONVERSATION = REPORT
A = B = C = D = E = F = G = H = I = J = K = L = M = N = O
= P = Q = R = S = T = U = V = W = X = Y = Z
a = b = c = d = e = f = g = h = i = j = k = l = m = n = o = p =
q = r = s = t = u = v = w = x = y = z
1 = 2 = 3 = 4 = 5 = 6 = 7 = 8 = 9 = 0
, = . = ; = ! = _ = ( = ) = + = – = = = # = $ = % = & = ’ = ^ = @
Type of Characters
Template
Large caps
Small caps
Numeric
Symbols
Folder name
input
File comment
input
7
When you have finished setting the folder name, press and hold the MENU/
SET button for 1 second or longer.
This completes the folder naming procedure.
(If you wish to continue assigning names to folders, press the MENU/SET button and repeat
the procedure from step 3.)
8
Press the STOP button to close the sub menu.
....................................................................................................................................................
Notes
• The folder naming process ends automatically when the twelfth character is set.
• If you input more than 12 characters, “OVER-FLOW” appears on the display.
• You can use a PC to easily change the folder names on the recorder (☞ P.92).
Available characters
5
64
1
2
4
5
Assigning File Comments (COMMENT)
Comments of up to 100 characters can be added to each recorded file. Comments and other
file information such as date and time can help identify recordings without having to playback.
Assigning File Comments (COMMENT)
1
Press the 3 or 2 button in the
sub menu screen, and select
the “COMMENT”.
See ☞ P.17 and 19 regarding the sub
menu.
2
Press the MENU/SET button.
The file comment setup process
begins.
3
Input the character.
If you will input characters using the
recorder, see step 5 of “Assigning
Folder Names” (☞ P.61).
If you will input characters using a
computer, see “Editing File
Comments” (☞ P.92).
4
When you have finished
setting the file comments,
press and hold the PLAY
button for 1 second or longer.
This completes the file comment input
procedure.
5
Press the STOP button to close
the sub menu.
....................................................................................................................................................
Note
In case of WMA files, file comments can only be added to files recorded with Olympus recorders.
5
65
1
3
2
4
Moving Files Across Folders
A recorded file can be transferred from one folder to another.
The file is added at the end of existing files in the destination folder.
Moving Files Across Folders
1
Choose the file you want to move
and play it.
2
Press and hold the FOLDER
button for 1 second or longer
while the file is playing.
“MOVE?” appears on the display.
a File to transfer
b Current folder
c Destination folder
3
Press the 3 or 2 button to
choose a destination folder.
If you choose the current folder as the
destination folder, the selected file will
move to the end of the existing files in it.
4
Press the MENU/SET button to
accept the chosen destination
folder.
The file is moved.
Transfer is complete when “MOVE DONE”
appears.
{
....................................................................................................................................................
Notes
• If the destination folder is full (a maximum of 199 files), “FOLDER FULL” appears on the display and files
cannot be transferred to it.
• The file transfer process is aborted if you press the STOP button or leave the recorder idle for 8 seconds.
5
66
{
{
{
{
{
{
1
LCD Display Information
The LCD screen on the recorder can display 6 different format of information by pressing the
DISPLAY button. This help review and confirm different recorder settings and file information.
LCD Display Information
1 File length
Shows how long a file is.
2 Time stamp
Shows the year, month, and
date that the file was
recorded.
3 Time stamp
Shows the time that the file
was recorded.
6 Current time and date
Shows the current time and
date. (During playback, the
“TIME & DATE” or the
counter appears.)
5 Memory remaining
Shows remaining recording
time.
4 File comment*
Shows comment added to
a file. (If there is no
comment, “----” will appear.)
* If a comment contains many characters, it will
scroll horizontally to display the complete
comment.
1
Press the DISPLAY button.
The LCD display views will switch every time the DISPLAY
button is pressed.
While in stop or playback mode
When pressing Display, the recorder will cycle through 1 to
6. If there is no file, 5 and 6 will display alternately.
5
67
1 Recording level meter
Displays the audio input level
in graphics. The display of the
audio input level is different
depending on stereo recording
or monaural recording.
2
Remaining memory bars
Displays the remaining time
available for recording in bar
mode and count-down mode.
1 VCVA recording level
meter
Displays the audio input level
and start level in graphics.
(Displays in “Waiting” if it has
not reached to the VCVA start
level).
The display of the audio input
level is different depending on
stereo recording or monaural
recording.
2
Remaining memory bars
Displays the remaining time
available for recording in bar
mode and count-down mode.
LCD Display Information
Display in the
monaural
recording
Display in the
stereo recording
mode
Display in the
monaural
recording
Display in the
stereo recording
mode
While in record mode
Displays 1 and 2 alternately.
While recording in VCVA mode
Displays 1 and 2 alternately.
5
68
1
Press and hold the MENU/SET
button for 1 second or longer.
The main menu opens (☞ P.16, 18).
2
Press the 3 or 2 button to
choose “
◊
SUB MENU”.
3
Press the MENU/SET button.
The sub menu opens (☞ P.17, 19).
4
Press the 3 or 2 button to choose
“FORMAT”.
5
Press the MENU/SET button.
“CANCEL” is flashing.
6
Press the 3 button to choose
“START”.
“START” is flashing. When the 2 button
is pressed, it will return to the flashing
display of “CANCEL”.
7
Press the MENU/SET button.
After “DATA WILL BE CLEARED” turns
on for about 2 seconds, “CANCEL” will
flash.
1,3,
5,7
2,4
6
Formatting the Recorder (FORMAT)
Formatting the Recorder (FORMAT)
If you format the recorder, all function settings will return to their defaults*.
All files** stored in the recorder will be deleted.
If you have important files that you want to save, connect the recorder to a computer and
transfer those files from the recorder to the computer before formatting the device.
* Date and time settings will not be cleared, so you won’t need to set them again.
** Locked files will also be deleted.
5
69
8
9
Formatting the Recorder (FORMAT)
8
Press the 3 button again to
choose “START”.
“START” is flashing. When the 2button
is pressed, it will return to the flashing
display of “CANCEL”.
9
Press the MENU/SET button
again.
Formatting begins and an indicator
flashes on the display.
“FORMAT DONE” displays when formatting
ends.
{
....................................................................................................................................................
Notes
• Never format the recorder from a PC.
• When the recorder is formatted, all the stored data, including locked files, are erased.
• After formatting, the first file name is 0001.
• While formatting, do not remove the batteries. It may take 10 seconds or more for the erasing to end.
70
6
The DSS Player Software can be used to do the following:
• Playback voice files on your PC and on the recorder when connected via USB. Download
files from the recorder to the PC or upload files from the PC to the recorder.
• If an upgrade (Option) to DSS Player Plus is executed, various additional functions can be
utilized (☞P.96).
Precautions on using the recorder connected to a PC
6 Preparation Before Using DSS Player
Using DSS Player Software
● When you are downloading a file from
the recorder or uploading a file to the
recorder, do not remove the USB cable
even if the screen is indicating you can.
Data is still being transferred while the
record/play indicator lamp is blinking.
When removing the USB cable, be sure
to follow the description in ☞P.79. If the
USB cable is removed before the drive
is stopped, data may not be
successfully transferred.
● On a PC, do not format the drive of the
recorder. Initialization is not successfully
achieved on a PC. For initialization,
follow the instructions in the menu
screen of the recorder (☞ P.17,19).
● Folder (directory) names displayed by
file management tools such as Explorer
attached to Microsoft Windows and
Finder attached to Mac OS are different
from the folder names settable with the
recorder or DSS player.
● If folders or files stored on the recorder
are moved or renamed by using a file
management tool such as Explorer or
Finder, the order of files may be
changed or files may become
unrecognizable.
● Data can be written or uploaded to the
recorder even though the attribute of
the recorder drive is shown as Read-
only by the operating system of the PC.
● As the noise may cause adverse effects
on electronics devices nearby the
recorder, unplug the earphone when
you connect the recorder to a PC.
Using DSS Player Software
71
6
Windows
Macintosh
Operating Environment
Basic Operating Environment of DSS Player
Operating Environment
IBM PC/AT compatible PC
Microsoft Windows Me/ 2000
Professional/XP
Professional,Home Edition
Intel Pentium II class 333
MHz processor or more
(If recording to a hard disk
directly with the WMA format,
please use in the range of
500MHz or more)
128MB or more (256MB or
more is recommended)
50MB or more
2x or faster CD-ROM, CD-R,
CD-RW, DVD-ROM drive
Creative Labs Sound Blaster
16 or 100% compatible
sound card
Microsoft Internet Explorer
4.01 SP2 or later
800 x 600 pixels or more, 256
colors or more
One free port
Earphone output or speakers
• The mouse or similar to a
pointing device.
• Environment where the
Internet can be utilized.
PC:
Operating
System:
CPU:
RAM:
Hard drive
space:
Drive:
Sound card:
Browser:
Display:
USB port:
Audio I/O
terminals:
Others:
Power Mac G3 233 MHz
class processor or faster
iMac/ iBook/ eMac/ Power
Mac/ PowerBook
(The computer must support
a standard USB port)
(If recording to a hard disk
directly with the WMA format,
please use in the range of
500MHz or more)
Mac OS 10.1/10.2/10.3
128MB or more (256MB or
more is recommended)
50 MB or more
2x or faster CD-ROM, CD-R,
CD-RW, DVD-ROM drive
800 x 600 pixels or more, 256
colors or more
One free port
Earphone output or speakers
PC:
Operating
System:
RAM:
Hard drive
space:
Drive:
Display:
USB port:
Audio I/O
terminals:
72
6
Windows
1
Insert DSS Player into the CD-
ROM drive.
The installation program will start
automatically. Once the program starts,
jump to step 4. If it does not, follow the
procedures in steps 2 and 3.
2
Click the [start] button and select
[Run].
3
Enter “D:\setup.exe” in the [Open]
field and click [OK] .
This is assuming the CD-ROM drive is D.
Before you connect the recorder to your PC and use it, you must first install the DSS player
software from the included Software CD.
Applications included with “DSS Player”
• DSS Player: Recorded voice files can be downloaded to the PC for complete file management and playback
solution.
• Acrobat Reader is installed on your PC. It is required to view the accompanying manual in PDF format.
Be sure to confirm the following before installation:
• Exit all running applications.
• Eject the floppy disk if you are using one.
• If you are running Windows2000/XP or Mac OS X on the network, you need to log on as an Administrator.
Installing Software
Installing Software
4
The installation Language
Selection dialog box opens.
Click the desired language to select it.
73
6
Installing Software
Installing the Device Driver
11
Connect the recorder to your
PC, referring to “Connecting to
Your PC” (☞ P.78).
When you connect the recorder to your
PC for the first time after installing DSS
Player, the recorder’s driver will be
installed automatically. If the driver is
installed properly, DSS Player will start
automatically.
(For details about operation for DSS
Player see pages from P.83)
Installing DSS Player
5
Register user information.
Enter your name, company name and
serial number. For the serial number,
see the label attached to the CD-ROM
package provided with DSS Player.
When entered, click [Next]. When the
confirmation dialog appears, click
[Yes].
6
Confirm your acceptance of
the terms of the Licensing
Agreement.
You must accept the terms of the
Licensing Agreement to install DSS
Player. If you accept them, click [Yes].
7
Select where to install DSS
Player.
This lets you specify the folder in which
to install DSS Player. Click [Browse] to
find the desired installation folder. To
accept the default folder, click [Next].
Note
If the installation folder does not exist, a
confirmation dialog box opens to get your
permission to create a folder for this
purpose. Click [Yes].
8
Select a program menu folder.
You may change the program menu
folder to another one, such as [Start
Up]. To accept the default folder, click
[Next].
9
Authorizing the start of file
copying.
Confirm all “Current Settings”. To accept
them, click [Next].
Note
To change the program menu folder or
installation folder, click [Back].
10
Copy files.
Wait until DSS Player is installed on
your PC, then click [Finish].
The screen returns to the opening
screen automatically.
74
6
Macintosh
7
Completing setup.
Installation has finished. Click [Quit].
8
Register user information.
To use the DSS Player, it is necessary to
register the user information at the time
of initial startup.
Open the [DSS Player] folder created at
installation, and the user’s registration
screen will be displayed, if the is
double clicked. Please input your name,
company name, and serial number.
Please see the seal attached to the CD-
ROM package included with the DSS
Player, for the serial number. After the
input has ended, click [OK] to complete
the registration.
Installing Software
1
Insert DSS Player into the CD-ROM
drive.
2
Double-click CD icon.
Double-click the desired language to
select it.
3
Double-click the following icon.
4
Click [Continue] when the DSS
Player opening screen appears.
5
Confirm your acceptance of the
terms of the Licensing Agreement.
You must accept the terms of the
Licensing Agreement to install DSS
Player. If you accept them, click [Agree].
6
Select where to install DSS Player.
This lets you specify the folder in which
to install DSS Player. To accept the default
folder, click [Choose].
Installing DSS Player.
Installing Software
75
6
Uninstalling Software
1
Exit DSS Player.
2
Select [Control Panel] from [start] menu.
3
Click [Add/Remove programs] in the control panel window.
4
A list of applications that have been installed is displayed.
Select the software you would like to uninstall/remove.
5
Click [Change/Remove].
6
Confirmation of Deleting the File.
Click the [OK] button to start uninstalling.
An additional message may appear, if so, read it carefully and follow the instructions given.
7
When the [Maintenance Complete] screen is displayed, click [Finish] to
complete uninstalling.
Uninstalling Software
To uninstall any of the software component of the DSS player software installed on your PC,
follow the steps below.
Windows
....................................................................................................................................................
Note
The voice files you made are stored in the [MESSAGE] folder. If you don’t need them, delete them. You can
confirm the location of the [MESSAGE] folder by clicking [Options] in the [Tools] menu before uninstalling.
76
6
Macintosh
1
Exit DSS Player.
2
Delete the Preferences File.
Delete the [DSS Preference] file in the following location.
Macintosh HD : Users : Library : Preferences
3
Delete the Executable File.
Delete the [DSS Player] file in the location where you installed the file.
4
Delete the Help File.
Delete the [DSS Player Help] file in the following location.
System Folder : Help
Uninstalling Software
....................................................................................................................................................
Note
The voice files you made are stored in the [MESSAGE] folder. If you don’t need them, delete them. You can
confirm the location of the [MESSAGE] folder by clicking on [Options] in the [Tools] menu before uninstalling.
Uninstalling Software
77
6
....................................................................................................................................................
Note
For more information on menus and operations, refer to Online Help. You will be able to use Online Help
after DSS Player is installed.
Using Online Help
To open Online Help, you have the following options.
(Windows)
• Click the [start] button, select [All Programs], then [Olympus DSS Player], then click [Help].
• While DSS Player is running, choose [Contents] from the [Help] menu.
• While DSS Player is running, press [F1] on the keyboard.
(Macintosh)
• While DSS Player is running, choose [DSS Player Help] from the [Help] menu.
Search by Contents
1
Once the Online Help screen appears, click
the Contents tab.
2
Double-click the icon of the desired
topic heading.
The title of the topic is displayed.
3
Double-click the icon of the desired topic.
An explanation of the topic is displayed.
Search by Key word
1
Once the Online Help screen appears, click
the Index tab.
2
Enter text.
Matching keywords are located automatically.
3
Choose a topic, then click [Display].
An explanation of the topic is displayed.
Using Online Help
2
3
1
2
1
3
78
6
Connecting to Your PC
Connecting to your PC using the USB
cable
1
Release the HOLD switch.
2
Connect the USB connection
cable to the USB port or the
USB hub of the PC.
3
Confirm that the recorder has
stopped, and connect the USB
cable to the connection port
on the bottom of the recorder.
Please connect the USB connection
cable mark to match the mark
of the recorder connection port.
“STORAGE REMOTE” is displayed
on recorder if the USB cable is
connected.
Connecting to Your PC
Be sure to finish installing DSS Player before connecting the recorder.
Windows
Macintosh
When the recorder is connected and “My Computer” is
opened, a removable disk drive is displayed. If “Add New
Hardware Wizard” appears, cancel the wizard by pressing
the [Cancel] button and then install DSS Player.
If the recorder is connected to Mac OS, an icon with a drive
name of “Untitled” appears.
79
6
Windows
1
Notes
• When connecting this recorder with the PC and utilize DSS Player, in the menu setting of this recorder set
the USB class (☞ P.111) to the “MASS STORAGE” class. If connected by “AUDIO CLASS”, this recorder
will not be recognized as a removable disk drive.
• Be sure to use the attached dedicated cable for the USB connecting cable. If any other company’s cable
is used, it will be the cause trouble. Also, please do not connect this dedicated cable to any other company’s
product.
Disconnecting from Your PC
1
Click the on the task bar
located at the lower-right corner
of the screen. Click [Safely
Remove Hardware].
It will read [Stop USB Disk-Drive] for
Windows Me. The drive letter will differ
depending on the PC being used.
2
Disconnect the USB cable.
Connecting to Your PC
Macintosh
1
Move the icon of the recorder's drive displayed on desktop to trash box by
drag and drop.
2
Disconnect the USB cable.
80
6
Connecting to Your PC
Notes
• NEVER disconnect the USB cable while the record/play indicator lamp is flashing. If you do, the data will
be destroyed.
• When the recorder is connected to a PC, the power will be supplied from the USB cable.
• Refer to the user’s manual for your PC regarding the USB port or USB hub on your PC.
• Be sure that you connect the USB cable either directly to the USB port on your PC or the self-power (AC
adapter connection) USB hub.
• Be sure to push the cable connector all the way in. Otherwise, the recorder may not operate properly.
• Release the HOLD switch.
Connecting to Your PC
81
6
Place the recorder on the cradle
1
Connect the USB connection
cable to the USB port or the USB
hub of the PC.
2
Connect the USB connection
cable to the cradle.
Connect the mark of the USB
connection cable facing up to match the
mark of the cradle connection port.
3
Make sure that the recorder is in
the Stop mode, and place it in the
cradle.
“STORAGE REMOTE” is displayed on
recorder if the USB cable is connected.
PC I/F
Connecting to Your PC
Connecting to your PC using the cradle
82
6
Remove the recorder from the cradle
Follow step 1 in “Disconnecting from Your PC” (☞ P.79).
To prevent damage or loss of the data, confirm that the
recording/playback indicator lamp of this recorder is not on,
and remove this recorder and USB connection cable from
the cradle.
....................................................................................................................................................
Notes
• When connecting this recorder with the computer and utilize DSS Player, in the menu setting of this
recorder set the USB class (☞ P.111) to the “MASS STORAGE” class. If connected by “AUDIO CLASS”,
this recorder will not be recognized as a removable disk drive.
• Be sure that you connect the USB cable either directly to the USB port on your PC or the self-power (AC
adapter connection) USB hub.
Connecting to Your PC
Connecting to Your PC
83
6
By connecting the recorder to your PC, you can automatically start the application.
Disabling automatic start
1
Right click on the of the taskbar on the
lower right of the screen, and select
[Setting].
The application which enables setting will be displayed
by dialog.
2
Click the of the [DSS Player Version 6].
The check mark on [DSS Player Version 6]
disappears. For automatic start, select and click DSS
Player to reinstate again.
Windows
3
2
2
Running DSS Player
Running DSS Player
Manual start
1
Start Windows.
2
Click the [start] button, select [All
Programs], then [Olympus DSS
Player].
3
Click [Olympus DSS Player].
..............................................................................................................................................................
Note
You cannot run more than one DSS Player program or multiple copies of the same program simultaneously.
2
84
6
Macintosh
....................................................................................................................................................
Note
The Mac version DSS Player has no automatic start function.
To start, open the “DSS Player” folder created upon installation and double-click the icon.
When it starts for the first time after installation, user information needs to be registered.
Please see ☞P.74 for details.
Running DSS Player
Running DSS Player
85
6
3
2
1
3
4
4
2
1
Window Names (DSS Player)
Window Names (DSS Player)
1 Play Control Bar
Control buttons to play and stop voice files.
2 Dictation Folder Window
Will display the directory structure of the DSS,
WMA, WAVE (Windows only) and AIFF
(Macintosh only)-format files stored on your
PC’s hard disk.
3 Device Manager Window
Will display the directory structure of the folders
in the recorder.
4 Voice File List Box
Will display the voice files in the folder selected
in 2 and 3.
(Windows)
* Main screen displayed when
DSS Player is started
(Macintosh)
86
7
7 Managing Files on Your PC
1
2
Download Voice Files from the Recorder
There are 3 download options to transfer voice files from the recorder to the PC:
• Download Selected Files
Download one or several voice files to your PC.
• Download Folders
Download all the voice files in one folder.
• Download All
Click the icon and download all the voice files stored in the recorder to your PC.
The following is an explanation of “Download Selected Files”. For explanations of “Download
Folders” and “Download All”, refer to Online Help.
Download Selected Files
1
Select the folder.
From the Device Manager window, select the folder
that contains the voice file you would like to download.
The illustration shows that Folder A has been
selected.
2
Select the voice file.
Select the voice file you would like to download from
the Voice File List Box. To select more than one file,
hold either the [Ctrl] or [Shift] key and select files.
The illustration shows that one voice file is selected.
Download Voice Files from the Recorder
87
7
3
3
Download the voice file.
(Windows)
From the [Download] menu, click
[Download Selected Files].
(Macintosh)
From the [Tools] menu, click
[Download Selected Files].
4
Download complete.
Do not disconnect the USB cable while
the record/play indicator lamp on the
recorder is flashing. Disconnecting the
USB cable when the recorder lamp is
flashing will result in data loss or
corruption.
..............................................................................................................................................................
Notes
• NEVER disconnect the USB cable while the record/play indicator lamp is flashing. If you do, the data will
be destroyed.
• Depending on the size of the voice file and your PC, it may take some time to download the files.
• The downloaded files will be stored in the download tray folder that corresponds to the folder in the
recorder.
(Example: A voice file downloaded from Folder A will be stored in download tray A on your PC.)
• If a voice file already exists on your PC with the same name, date and time recorded, the new file will not
be downloaded.
Download Voice Files from the Recorder
88
7
Play a Voice File
1
Select the folder.
Select the folder that contains the voice
file you would like to play.
2
Select the voice file.
Select the voice file to play from the Voice
File List Box.
3
Play the voice file.
Click the (play) button of the Play
Control Bar.
Play a Voice File
Other playback control such as Rewind, Fast
Forward, Stop, Speed Control, Volume
Control, Time Axis and Index Skip are
available from the Play Control Bar.
Extension
File number ....... A serial number automatically assigned by a Digital Voice Recorder.
User ID ....... The name that has been set on the Digital Voice Recorder. The default name on the
Digital Voice Recorder is “DS-2”. The user ID can be modified with DSS Player (☞ P.91).
File name
File names are assigned in the following manner:
DS_2
0001.DSS
3
1 2
89
7
DSS Player has a feature to enable you to upload DSS-format voice files from your PC to the
recorder.
Upload Voice Files to the Recorder
1
Select the folder.
Select the folder that contains the voice
file to upload from the Dictation Folder
window.
2
Select the voice file.
Select the voice file to upload from the
Voice File List Box.
3
Select the folder to upload.
(Windows)
From the [Download] menu select
[Upload Files] or click the Upload icon.
Once the folder list box where the file is
to be uploaded is displayed, select the
folder from which the file is to be
uploaded.
(Macintosh)
From the [Tools] menu, click [Upload
Files]. Once the folder list box where the
file is to be uploaded is displayed, select
the folder from which the file is to be
uploaded.
4
Upload the voice file.
The voice file is uploaded to the recorder.
Upload Voice Files to the Recorder
1
2
90
7
5
Upload complete.
Once the transmission screen closes and the record/play indicator lamp on the recorder is
OFF, upload is completed.
You can also drag and drop files from the Voice File List Box to the Device Manager window.
Upload Voice Files to the Recorder
..............................................................................................................................................................
Notes
• NEVER disconnect the USB cable while the record/play indicator lamp is flashing. If you do, the data will
be destroyed.
• If a file with the same name exists in the folder of this recorder, it cannot be transferred.
Upload Voice Files to the Recorder
91
7
....................................................................................................................................................
Note
NEVER disconnect the USB cable while the record/play indicator lamp is flashing. If you do, the data will be
destroyed.
21
Audio files are stored in the Message folder on the hard disk. If you want to send a voice file by
attaching it to E-mail, select the file from the Message folder.
The Message folder location can be found from the [Tools] menu, [Options], and then “Download
folder” tab.
The file can be replayed with DSS Player-Lite even though the recipient does not have DSS
Player. Free DSS Player-Lite can be downloaded from Olympus homepage.
http://www.olympusamerica.com/cpg_section/cpg_downloads.asp
http://olympus-europa.com/consumer/2590_software.cfm
Send Voice Files with E-mail
The user ID is used in file names that are recorded on a Digital Voice Recorder.
Changing User ID
1
Enter the user ID in the [Transfer User ID]
window.
(Windows) From the [Download] menu.
(Macintosh) From the [Tools] menu.
2
Click [Transfer].
The new user ID will be transferred to the Digital Voice
Recorder.
Send Voice Files with E-mail/Changing User ID
92
7
Changing a folder name in the Voice Folder window
(Windows)
You can change a folder name using the [Rename Folder] command from the [Edit] menu.
A folder name can be up to 20 characters long and cannot use \ /:*?"<>|.
(Macintosh)
Choose the [Rename Folder] command from the [File] menu.
Changing a folder name in the Device window
(Windows)
Right-click the folder name to change, select the [Rename Folder] and input the new folder
name.
(Macintosh)
Choose the [Rename Folder] from the [File] menu and type a folder name.
The names of the folders on the Digital Voice Recorder is updated with the new folder
names.
Device Window folder names consist of a string of 12 or fewer single-byte alphanumeric
characters.
Changing a Folder Name
You can use a PC to create or edit file comments in DSS Player in the [Edit Comments] window,
and transfer them from the PC to the recorder. You can also edit file comments imported from
the recorder to a PC.
Choose the [Edit Comments] command from the [Tools] menu.
Files comments can use up to 100 alphanumerical characters and symbols.
Editing File Comments
..............................................................................................................................................................
Note
NEVER disconnect the USB cable while the record/play indicator lamp is flashing. If you do, the data will be
destroyed.
..............................................................................................................................................................
Note
NEVER disconnect the USB cable while the record/play indicator lamp is flashing. If you do, the data will be
destroyed.
Changing a Folder Name/Editing File Comments
93
7
....................................................................................................................................................
Note
NEVER disconnect the USB cable while the record/play indicator lamp is flashing. If you do, the data will be
destroyed.
Editing a Template
You can edit folder name and file comment templates in DSS Player in the [Edit and Upload
Template] window and transfer them to the recorder. Templates downloaded from the recorder
can also be edited.
(Windows)
Select [Edit & Upload Templates] from [Download] to open the [Edit and Upload Template]
window.
(Macintosh)
Select [Edit & Upload Templates] from [Tools] to open the [Edit and Upload Template] window.
The maximum number of characters that can be entered is 8 characters for a folder name,
and 20 characters for a comment.
Transfer edited
content to the
recorder
Save edited
content
Read saved
content
Delete edited
content
Close the dialog
box
Delete all changed
content
Transfer all comment
and folder information
to the recorder
Load templates
from the recorder
Editing a Template
94
7
Windows
Macintosh
If this recorder is connected by USB, it
can function as a USB speaker. If the
recorder is used as a USB speaker, audio
output can be done through the recorder,
without audio output from the speaker
attached to the computer.
Select the [Select Audio Output] from the
[Tools] in the menu bar, and change the
output destination.
Uses as a USB Speaker
In order to use this recorder as a USB speaker or a USB microphone in DSS Player, it is
necessary to change to “AUDIO CLASS” after connecting to the computer in the “MASS
STORAGE” class. When changed for the first time, the driver will be installed into the computer.
After connection, execute the following settings.
USB Microphone/USB Speaker
The recorder can be used as a USB speaker or microphone when connected to a PC. If you
use the recorder as a USB speaker, you can output voice through the recorder instead of using
the PC speaker. When used as a microphone, you can record voice on your PC using your
favorite application.
Audio set up
1
Click the icon in the toolbar to change the recorder to Audio device.
1
From the [Tools] menu, select [Change to audio device].
USB Microphone/USB Speaker
95
7
If this recorder is connected by USB, it can function as a USB microphone. Also, if an upgrade
(☞ P.96) is executed to the DSS Player Plus, voice recognition software or other applications
using this recorder as a microphone, voice can be input to a computer.
Windows 2000, Me
Select [Control Panel] = [(Sound and) Multimedia] = [Audio] tab, and select the [USB Audio
Device] from the recording device.
Windows XP
Select [Control Panel] = [Sound and Audio Device] = [Audio] tab, and select the [Microphone
Control (DVR)] from the recording device.
Uses as a USB microphone
....................................................................................................................................................
Notes
• If the USB class is set to “AUDIO CLASS” in the menu setting of this recorder, this recorder will not be
displayed as a removable disk drive. Reset to the “MASS STORAGE” class then connect to the computer.
• Changing the USB speaker can be executed from the [Control Panel] as well as the USB microphone.
• When using it as a USB microphone, regardless of the recording mode of this recorder, it becomes the
USB stereo microphone. When connecting this recorder and external microphone, use a stereo microphone.
USB Microphone/USB Speaker
96
8
Upgrade Function
The “DSS Player” enables upgrades (Options) to the “DSS Player Plus” which is equipped with
more functions. In addition to the DSS Player functions, voice recognition using voice recognition
software, joining of files, sharing of files and the menu setting of this recorder can be utilized.
Purchase and Upgrade
To purchase “DSS Player Plus” and upgrading from “DSS Player” is operated in the following
procedures.
Upgrade Function
Plus
Windows
Macintosh
1
Start the DSS Player.
Please see ☞ P.83 for the starting method.
2
Click the button or select [Purchase
a new license for DSS Player Plus] in
the [Help] menu.
The web browser will start and the purchase
site of the DSS Player Plus will be displayed.
Please operate according to guidance on the
screen.
When the purchase procedure is completed, the
license number will be issued by mail.
2
8 DSS Player Expanded Functions
97
8
3
Select [Upgrade to DSS Player Plus]
from the [Help] menu.
The “Upgrade to DSS Player Plus” dialog will
be displayed.
4
In the [Upgrade to DSS Player Plus]
dialog, enter the license number of your
purchase, and click the [OK] button.
When starting the application next time, DSS
Player will be upgraded to DSS Player Plus.
Upgrading to DSS Player Plus
When upgraded, the title of the main menu changes to [DSS Player Plus]. Also, you can confirm
the upgrade by selecting [About DSS Player] from the [Help] menu on the tool bar. In the
[About DSS Player] window, the [DSS Player Plus] should be displayed.
Upgrade Function
....................................................................................................................................................
Notes
• To purchase the license number, it requires an environment where the Internet can be utilized.
• Please see the details in the website regarding the purchase of the license number.
3
98
8
IBM Corp.
• IBM ViaVoice Pro USB Edition 10
ScanSoft, Inc
• Dragon NaturallySpeaking 8
Please inquire to the Olympus Service Center regarding the situation for software to be released
hereafter (☞ P.119).
Also, when you use such software in combination with this recorder, please confirm the software
operation with the user’s computer and the maker.
• Please contact IBM for support information on the voice recognition software, ViaVoice.
• Please contact ScanSoft for support information on ScanSoft Dragon NaturallySpeaking.
Plus
Using Voice Recognition Software
Using Voice Recognition Software
....................................................................................................................................................
Note
Voice recognition can only be used with Windows.
In conjunction with “ViaVoice” of IBM Corp. or “Dragon NaturallySpeaking” of ScanSoft Inc.
which are on the market, the files recorded in this recorder can be transferred to a computer
and converted to text. Please see the instruction manual for the voice recognition software for
details.
The voice recognition software which is confirmed for use with this recorder is as follows. (As
of September, 2004)
99
8
1
Connect the recorder to your PC, and start the DSS Player Plus.
2
Change the recorder to [AUDIO CLASS].
Follow the procedure in P.111 to change the recorder to AUDIO CLASS.
3
Click the [start] button, select [All Programs], then select [IBM ViaVoice
VoiceCenter].
When the DSS Player Plus and IBM’s voice recognition software “ViaVoice” are used together,
execute the setting in the following procedure to record the voice accurately, acquired from the
built-in microphone or speaker.
Voice Recognition in ViaVoice (Audio set up)
Using Voice Recognition Software
4
From the IBM [ViaVoice
VoiceCenter], select [ViaVoice],
[Tools], then [Analyze My Voice].
The ViaVoice User Wizard window
appears.
5
From the [Device] list box, select
[Olympus DSS File] or [Olympus
WMA File].
Select [Olympus DSS File] or [Olympus
WMA File] in the [Device] list box, then
click the [Next] button.
6
Click the [Next] button.
The [Audio Setup Wizard] window
appears.
100
8
Using Voice Recognition Software
7
Select a sound card.
When the [Selecting a Sound Card] window
appears, select [USB Audio Device] for [Input]
and follow the instructions on screen. (Select
[Microphone Control (DVR)] for Windows XP.)
8
Proceed with the AUDIO Setup
according to the instruction on screen.
During audio setup, enrollment, please input
voice data from the recorder.
It is recommended that you enroll while in your normal surrounding environment settings.
This will help improve the voice recognition by registering your voice characteristics and your
environment.
Using Voice Recognition Software
101
8
When the DSS Player Plus and ScanSoft’s “Dragon NaturallySpeaking 8” are used together,
create the user in “Dragon NaturallySpeaking 8” in advance. It is necessary to execute the
training. By executing the training, the features of your voice will be registered, and the rate of
recognition will improve. Please advance the setting according to the following procedures.
Voice Recognition in Dragon NaturallySpeaking (Training)
1
Startup Dragon NaturallySpeaking 8.
Click the [start] button, select in the order of [All Programs] = [Dragon NaturallySpeaking 8] =
[Dragon NaturallySpeaking 8].
* If the DSS Player Plus has started, please close it in advance.
2
[New User Wizard] will be displayed.
* If the user is already registered in Dragon
NaturallySpeaking 8, the [Open User] dialog will
be displayed. In this case, click the [New]
button and display [New User Wizard].
3
Creating a User.
Input a name into [Your name], and select
[Olympus IC Recorder DS-2/20] from the
[Dictation source] list box, then click the
[Next] button.
4
Description of Wizard.
Description of this wizard will be displayed.
Click the [Next] button.
Using Voice Recognition Software
102
8
Using Voice Recognition Software
5
Recording Training Text.
Follow the instructions on the screen, and record the training text to this recorder. At this
time, record with any one of, “STEREO HQ”, “STEREO SP”, “HQ” and “SP” for the recording
mode, and “DICTATION” for the microphone sensitivity. Please refer to “Notes on Recording
For Voice Recognition”(☞P.105) for recording tips. After the recording is finished, click the
[Next] button.
6
Transferring the Recorded Voice.
Click [Olympus DSS Player] button
displayed on the screen. The DSS Player
Plus will startup and then follow the
instructions displayed on the screen to
execute the transfer of the recorded voice.
After finishing, click the [Next] button.
7
Adding a User.
Click the button displayed on the screen.
After this operation is finished, follow the
instructions on the screen, then complete
the registration for a new user.
Using Voice Recognition Software
103
8
DSS Player Plus can easily access ViaVoice and Dragon NaturallySpeaking 8 from the menu,
and it enables text conversion of the file in the Voice File List Box.
1
Select the folder.
From the Dictation Folder Window, select
the folder in which the file to be converted
to text is stored.
2
Select the voice file.
From the Voice File List Box, select the
file to be converted to text.
3
Start of voice recognition.
Clicking the arrow at the right side of the
voice recognition icon displays the voice
recognition software. Select and click
ViaVoice or Dragon NaturallySpeaking as
the software to be used.
Executing Voice Recognition
Using Voice Recognition Software
3
21
104
8
Using Voice Recognition Software
When Dragon NaturallySpeaking is Selected
The [Open User] dialog will be displayed, and select
the user created in procedure 3 on P.101, then click
the [Open] button. The [Transcription Options]
dialog will be displayed, and select the option
according to the purpose, then click the [Transcribe]
button.
The text conversion will start. However, if the voice
recognition software is not installed, the voice
recognition software start icon becomes an
invalid display.
Noise Canceling Function
Check [Use Noise Cancellation] in the [Voice
Recognition] menu to output voice using the noise
canceling function to the voice recognition software.
Using Voice Recognition Software
....................................................................................................................................................
Note
The voice recognition of the file recorded in LP mode cannot be recognized.
105
8
Notes on Recording For Voice Recognition
When recording voice to be processed
with voice recognition, set up your
DSS recorder as follows to improve
recognition accuracy.
• Set the microphone sensitivity to
“DICTATION” (☞ P.25).
• Set the recording mode other than “LP”
mode (☞ P.22).
• Set the Variable Control Voice Actuator
(VCVA) to “OFF” (☞ P.23).
• Register/enroll your voice in the voice
recognition software using the recorder.
• Record in a relatively quiet environment.
• Have the recorder microphone 5 to 10
cm away from your chin.
The file recorded in the next condition,
will be a low rate of recognition, which
can not be used for voice recognition.
• A conference or meeting where many
voices are recorded.
• Seminar or lecture where high-level
ambient noise tends to be recorded.
• Speak normally.
• When your voice is to be recorded, and
reduce the influence of the surrounding
noise, set the recording mode to “HQ”
or “SP”, and use the ME12 microphone
for dictation recording.
Using Voice Recognition Software
106
8
Joining Files
In DSS Player Plus, designated multiple voice files can be joined and one voice file can be
created.
1
Select the folder.
From the Dictation Folder Window, select
the folder which contains the files to be
joined.
2
Select the voice files.
From the Voice File List Box, select more
than one file to be joined.
3
Select [Join] from the [Edit] menu
or press the
button.
The dialog to join files will be displayed,
listing the files selected in step 2.
Joining Files
Plus
3
21
107
8
4
Set the order of files.
After joined, the playback order of the files
can be changed. Select a file, and move
the file to its appropriate position in the order
using the [Up] and [Down] buttons.
5
Input File Names.
The file name is created automatically after
joining and also, it enables input optionally.
6
Press the [Join] button.
The resulting file is saved under the name
specified in step 5, and stored in the
selected folder.
....................................................................................................................................................
Note
If the files to be joined have different recording modes, the mode of the file listed at the top is selected.
Joining Files
546
108
8
Splitting Files
One designated voice file can be split into the two files in DSS Player Plus.
1
Select the folder.
Select the folder containing the file to be split
from the Dictation Folder Window.
2
Select the voice files.
Select one file to split from the Voice File List
Box.
3
Select [Split] from the [Edit] menu or
press the
button.
The setting dialog of the file to be split will be
displayed.
Splitting Files
Plus
3
2
1
115
11
Troubleshooting
Troubleshooting
Symptom
Nothing appears
on the display
Won’t start
Unable to
record
No playback
tone heard
Does not
reverse skip in
the set skip
interval
Unable to erase
Noise heard
during playback
Recording level
too low
Unable to set
index marks
Probable cause
The batteries are not loaded properly.
The batteries are dead.
The recorder is in HOLD mode.
The recorder is in HOLD mode.
The batteries are dead.
Low remaining internal memory.
The maximum number of files has been
reached.
The earphone is connected.
The VOL button is set to 0.
The auto backspace review is set to “1
SEC SKIP” or “2 SEC SKIP”.
The file is locked.
The recorder was shaken during
recording.
The recorder was placed near a cell
phone or fluorescent lamp while
recording or during playback.
The microphone sensitivity is too low.
The maximum number of index marks
(16) has been reached.
The file is locked.
Action
Verify polarity is correct.
Replace with new batteries (☞ P.11).
Release the recorder from HOLD
(☞ P.12,13).
Release the recorder from HOLD
(☞ P.12,13).
Replace with new batteries (☞ P.11).
Erase unnecessary files (☞ P.51).
Check another folder.
Unplug the earphones to use the internal
speaker.
Adjust the VOL button.
Set the auto backspace review to “OFF”
in the menu setting (☞ P.44).
Unlock the file (☞ P.55).
Move the recorder.
Set the microphone sensitivity to
CONFERENCE mode and try again
(☞ P.25).
Eras5e unnecessary index marks
(☞ P.56).
Unlock the file (☞ P.55).
116
11
Troubleshooting
Symptom
Cannot find the
recorded voice
The playback
speed does not
change
Can not connect
to the computer
using the cradle
Probable cause
Wrong folder.
The noise cancellation function is set at
“LOW” or “HIGH”.
The setting of the USB class is “AUDIO
CLASS”.
Action
Switch to the right folder.
Set the noise cancellation function to
“OFF” or return to normal playback
(☞ P.47).
Set the USB Class to “MASS
STORAGE” in the menu setting of this
recorder (☞ P.111).
Troubleshooting
117
11
Accessories (optional)
Accessories (optional)
Stereo microphone: ME51S
To create stereo recordings in WMA format with clear sound and reduced noise.
Noise-Cancellation monaural microphone: ME12
(Dictation microphone)
Used to get crisp recordings of your own voice by reducing the effects of ambient noise.
This is useful microphone and suits for voice recognition.
Ni-MH Rechargeable Battery Charger: BU-400 (Europe only)
Charger for AA batteries (1 to 4) or 1 to 2 AAA batteries.
Ni-MH Rechargeable Battery: BR401
High-efficiency rechargeable long life batteries.
Connecting cord: KA333
Use to connect the microphone jack of this unit to a radio or other sound source.
Plug adapter: PA3
A mini plug adapter to connect 2.5 mm mini-plug devices such as microphone to the recorder
3.5 mm mini-jack.
PC Transcription kit : AS-2300
The AS-2300 transcription kit provides you with a PC-footswitch, a headset and DSS Player
software for easy transcription of DSS/WMA recordings.
118
11
Specifications
Recording format
DSS (Digital Speech Standard)
WMA (Windows Media Audio)
Input level
–70 dBv
Sampling frequency
STEREO HQ mode: 44.1 kHz
STEREO SP mode: 44.1 kHz
HQ mode: 44.1 kHz
SP mode: 12 kHz
LP mode: 8 kHz
Overall frequency response
STEREO HQ mode: 100 to 17,000 Hz
STEREO SP mode: 100 to 8,000 Hz
HQ mode: 100 to 7,000 Hz
SP mode: 200 to 5,000 Hz
LP mode: 200 to 3,000 Hz
Recording time
STEREO HQ mode: 1 hours 5 minutes
STEREO SP mode: 2 hours 10 minutes
HQ mode: 4 hours 20 minutes
SP mode: 10 hours 25 minutes
LP mode: 22 hours 20 minutes
Alkaline battery life
Recording:
Approx.15 hours (Stereo)
Approx.18 hours (Monaural)
Playback:
Approx. 10 hours (Stereo)
Approx. 11 hours (Monaural)
Ni-MH Rechargeable Battery (BR-401) life
Recording:
Approx.12 hours (Stereo)
Approx.14 hours (Monaural)
Playback:
Approx. 8 hours (Stereo)
Approx. 9 hours (Monaural)
Recording medium
Internal memory: 64 MB
Speaker
Built-in ø23 mm round dynamic speaker
MIC jack
ø3.5 mm mini-jack, impedance 2kΩ or more
EAR jack
ø3.5 mm mini-jack, impedance 8Ω or
more
Maximum working output (3 V DC)
200 mW or more (8 Ω speaker)
Input power requirement
Rated voltage: 3 V
Batteries: Two AAA batteries (LR03 or
R03) or Two Ni-MH
rechargeable batteries
External dimensions
122.5 x 37.5 x 17.5 mm
(without protrusions)
Weight
80 g (including alkaline batteries)
* Specifications and design are subject to change
without notice.
* Battery life is measured by Olympus. It varies
greatly according to the type of batteries used
and the conditions of use.
Specifications
… 9 …

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Olympus-DS2

  • waarom is deze olympus niet in een nederlandse uitvoering
    IK heb deze gekocht en kan er niet mee overweg.
    hij doet het gewoon niet,
    als er een vertaling is dan graag.
    bij voorbaat dank,
    met vriendelijke groet,

    jasper van almenkerk
    j.v.almenkerk@planet.nl Gesteld op 21-6-2011 om 20:59

    Reageer op deze vraag Misbruik melden

    • Ik heb hetzelfde probleem. Engelse handleiding snap ik niet, waarom geen Nederlandse? Ik heb hem in Nederland gekocht, dus moet er een Nederl. handleiding bij.Vorige vraagstelling dateert uit 2011, ik zie geen antwoord. Kan aan mij liggen, ben digibeet. Geantwoord op 29-4-2014 om 14:55

      Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Olympus DS2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Olympus DS2 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info