538172
10
Verklein
Vergroot
Pagina terug
1/184
Pagina verder
10
EN CS DA DE ES FR NL PL RU SV
3 In the position you want to end
partial erase, press the
ERASE
button again.
The erase starting point (time)
set in step 2 and the ending
point (time) set in this step will
be displayed alternatively for 8
seconds.
If you let the playback continue
until the end of the file, or in
case of a Verbal comment before
it, that will be considered the
ending point of the partial erase.
Playback will continue until the
end of the file or until the partial
erase ending point is confirmed.
5 Press the
+
button to select
[
Start
], then press the
OK/MENU
button.
The display changes to [ Erase ! ]
and erasing will start.
4 Press the
OK/MENU
button.
Erasing
Erasing files:
1 Select the file you want to erase.
2 Press the
ERASE
button.
Fast Play (fast playback):
Playback speed becomes faster
(+50%), and “Fast play” will be
displayed.
Notes:
If you press the 9 button once
while fast-forwarding or twice while
in stop mode, the recorder will stop
at the end of the file (F.Skip).
If you press the 0 button once
while rewinding or twice while in
stop mode, the recorder will stop at
the beginning of the file (B.Skip). If
the 0 button is pressed within 2
seconds, the recorder skips to the
beginning of the previous file.
If you press and hold the 9
button while fast forwarding (FF),
the recorder will continue to skip
forward.
If you press and hold the 0
button while rewinding (REW),
the recorder will continue to skip
backward.
The Cue and Review speed can be
set from [ Speed1 ] to [ Speed5 ]. Cue
and Review playback sound can be
set to [ On ] or [ Off ].
3 Press the
+
button to select
[
Erase in Folder
] or [
File
Erase
].
[ Erase in Folder ]:
All files in a folder can be erased
simultaneously.
[ File Erase ]:
Erase one file.
[ Erase Done ] is displayed when
the file is erased. File numbers
will be reassigned automatically.
Notes:
An erased file cannot be restored.
The erasing process may take up to
10 seconds. Do not interrupt this
process or data may be damaged.
Files cannot be erased in the
following cases.
- Files are locked.
- Files stored on a locked SD card.
Partially erasing a file
Any unnecessary part of a file can
be erased.
1 Playback the file you would like to
partially erase.
2 Press the
ERASE
button at the
point you want to start erasing.
While playback continues, [ Erase
Start ] will appear on the display.
If you press the F2 (
) button,
playback will skip (F.Skip) to the
end of the file and then stop. That
will be set automatically as the
ending point of the partial erase.
If you press the F1 ( ) button,
playback will skip back (B. Skip)
and restart from the partial erase
starting point.
4 Press the
ERASE
button to confirm
the erasure.
The display changes to [ Partial
erasing ! ] and erasing will start.
When [ Partial erase completed. ]
appears on the display, partial
erase is complete.
Notes
If the ERASE button is not
pressed within 8 seconds after the
[ Start point ] and [ End point ] are
alternately displayed, the recorder
will revert to stop status.
An erased file cannot be restored.
The erasing process may take up to
10 seconds. Do not interrupt this
process or data may be damaged.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Olympus DS-7000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Olympus DS-7000 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans, Pools, Deens, Zweeds als bijlage per email.

De handleiding is 3,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info