21
í
Varying the Image Brightness (Exposure Compensation)
Operating Procedure
1. Check that the lens barrier is open.
2. Press the OK/menu button.
¼ The monitor shows the shooting mode
menu 1/3.
3. Select by pressing the or
arrow pad key.
4. Select a + value (to brighten image) or – value (to
darken image) by pressing the or arrow pad key.
5. Press the OK/menu button.
¼ The camera returns to the shooting mode and the
monitor shows the corrected exposure value.
6. Press the shutter button.
¼ Images can be shot successively while maintaining the
corrected exposure value.
7. Turn the camera off.
¼ The exposure value is reset to ±0 (no correction).
The exposure compensation value on the monitor goes
out.
Although the camera’s exposure is set automatically, you can vary it to change the
image brightness in the range of ±2 stops (to 4-times brighter or 1/4-times darker
image) in 0.5-stop steps.
Arrow pad
OK/menu button
Shooting mode menu 1/3 screen