1.19
Getting started
7
The
LCD
now asks you to enter your fax number as you want it to appear on
other fax machines’ displays or printouts. The fax industry term for this
number is Subscriber
ID
.
8
Use the numeric keypad to enter the fax number. To insert a dash, as shown
here, press
DIALING OPTIONS
once. The number may contain up to 20
characters (numbers and dashes).
Note: If you make a mistake, press
CANCEL
to erase to the left.
To change just one number, press to move left, or to move right.
Press
CANCEL
to erase the number. Then re-enter the fax number cor-
rectly.
9
Press
ENTER
to save the number.
10
The
LCD
now asks you to enter the name you want to appear at the top of
faxes you send. The name may be up to 22 characters in length.
Use the one-touch keys to enter letters and other non-numeric characters.
(Refer to “Entering characters” on page 1.12.)
11
Press
ENTER
to save the setting and continue.
12
The
LCD
now shows the type of dialling:
13
Press
ENTER
and continue.
14
The
LCD
now shows the machine’s current reception mode.
15
For now, press or until the setting Fax Ready appears. (This setting can
always be changed. We’ll discuss reception modes further on pages 2.10–2.11.)
16
Press
ENTER
to save the setting. Your machine will return to standby mode.
Fax Ready
/
/Enter
Phone Type :Tone
/
/Enter
Your Name ;Upper
_
Your Fax Number
972-555-5525_
Your Fax Number
