694431
24
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
EN DE FR IT
ROMOTOP spol. s r.o.
Komenského 325
742 01 Suchdol nad Odrou
Czech Republic
tel.: +420 556 770 999
fax: +420 517 075 894
e-mail: info@romotop.cz
LUGO 01 Ceramics
Keramik
Céramique
Ceramica
LUGO 02 Stone
Stein
Pierre
Pietra
LUGO 03 Sheet steel
Blech stahl
Tôle d'acier
Lamiera d'acciaio
LUGO 04 Sandstone
Sandstein
Grès
Arenaria
EN DE FR IT
Product name Produktbezeichnung Nom du produit Nome prodotto
LUGO 01
Dimensions
HxWxD (mm)
Maße
HxBxT (mm)
Dimensions
HxLxP (mm)
Dimensioni
AxLxP (mm)
1213x560x470
Weight (kg) Gewicht (kg) Poids (kg) Peso (kg) 182
Product name Produktbezeichnung Nom du produit Nome prodotto
LUGO 02
Dimensions
HxWxD (mm)
Maße
HxBxT (mm)
Dimensions
HxLxP (mm)
Dimensioni
AxLxP (mm)
1213x560x470
Weight (kg) Gewicht (kg) Poids (kg) Peso (kg) 218
Product name Produktbezeichnung Nom du produit Nome prodotto
LUGO 03
Dimensions
HxWxD (mm)
Maße
HxBxT (mm)
Dimensions
HxLxP (mm)
Dimensioni
AxLxP (mm)
1180x560x470
Weight (kg) Gewicht (kg) Poids (kg) Peso (kg) 159
Product name Produktbezeichnung Nom du produit Nome prodotto
LUGO 04
Dimensions
HxWxD (mm)
Maße
HxBxT (mm)
Dimensions
HxLxP (mm)
Dimensioni
AxLxP (mm)
1213x560x470
Weight (kg) Gewicht (kg) Poids (kg) Peso (kg) 195
Flue pipe
diameter (mm)
Rauchabfuhrdurchmesser
(mm)
Diamètre du conduit
de fumée (mm)
Diametro del condotto
fumi (mm)
150
CAI diameter (mm) CPV-Durchmesser (mm Diamètre de l’AAC (mm) Diametro ACA (mm) 120
Air regulation
Primary=1 / Secondary=2
Luftregulierung
Primär=1 / Sekundär=2
Régulation de l’air
primaire=1 / secondaire=2
Regolazione aria
Primaria=1 /
Secondaria=2
1 / 2
Filling volume
(litres)
Füllungsgewicht
(Liter)
Volume du remplissage
(litres)
Volume del riempimento
(litri)
-
Nominal output
kW)
Nennleistung
(kW)
Rendement nominal
(kW)
Potenza nominale
(kW)
8
Total regulated output
(kW)
Reg. Gesamtleistung
(kW)
Rendement régulé total
(kW)
Potenza totale regolata
(kW)
4 – 11
Exchanger output
(kW)
Austauscherleistung
(kW)
Rendement de l’échangeur
(kW)
Potenza dello
scambiatore (kW)
-
Regulated output of the hot
water exchanger
(kW)
Reg. Leistung des
Warmwassertauschers
(kW)
Rendement régulé de
l’échangeur à eau chaude
(kW)
Potenza regolata dello
scambiatore ad acqua
calda (kW)
-
Max. operating overpressure
(kPa)
Max. Betriebsdruck
(kPa)
Surpression de
fonctionnement max. (kPa)
Pressione d’esercizio
massima (kPa)
-
Average heating capacity
(m
3
)
Mittlere Heizfähigkeit
(m3)
Capacité de chauffage
moyenne (m3)
Capacità termica media
(m3)
160
Average wood
consumption (kg/h)
Durchschnittlicher
Holzverbrauch (kg(h)
Consommation de bois
moyenne (kg/h)
Consumo medio di legna
(kg/ora)
2,6
Max. allowed wood batch
(kg/h)
Max. erlaubte
Holzzuladung (kg/h)
Dose de bois autorisée max.
(kg/h)
Dose massima di legna
consentita (kg/ora)
3,5
Prescribed fuel
Vorgeschriebener
Brennstoff
Combustible prescrit Combustibile prescritto
wood / Holz
bois / legno
Automatic doors
yes=1 / no=2
Schlagtür
ja=1 / nein=2
porte auto-refermable
oui=1 / non=2
Sportello con chiusura
automatica
sì=1 / no=2
1
Door design
Right=1 / Left=2
Türausführung
Rechts=1 / Links=2
Réalisation de la porte
Droite=1 / Gauche=2
Versione dello sportello
Destra=1 / Sinistra=2
2
Chimney draft
(Pa)
Kaminzug
(Pa)
Tirage de la cheminée
(Pa)
Tiraggio del camino
(Pa)
10
Smoke gases
(g/s)
Rauchgase
(g/s)
Gaz de fumée
(g/s)
Gas di scarico
(g/s)
7
Average temperature of
smoke gases (°C)
Durchschnittliche
Rauchgastemperatur (°C)
Température moyenne des
gaz de fumée (°C)
Temperatura media dei
gas (°C)
314,9
Efficiency (%) Wirksamkeit (%) Efficacité (%) Efficienza (%) 78
EN DE FR IT
Supplied accessories Mitgeliefertes Zubehör Accessoires fournis Accessori forniti
Automatic
ventilation valve
yes=1 / no=2
Automatisches
Entlüftungsventil
ja=1 / nein=2
Vanne d’aération
automatique
oui=1 / non=2
Valvola di scarico
automatica
sì=1 / no=2
2
Cooling valve
yes=1 / no=2
Abkühlventil
ja=1 / nein=2
Vanne de refroidissement
oui=1 / non=2
Valvola di raffreddamento
sì=1 / no=2
2
Temperature sensor tank
yes=1 / no=2
Temperaturfühlerschacht
ja=1 / nein=2
Bac de sonde thermique
oui=1 / non=2
Carter del sensore di
temperatura
sì=1 / no=2
2
Cover with insulation
yes=1 / no=2
Abdeckung mit
Isolierung ja=1 / nein=2
Couvert avec isolation
oui=1 / non=2
Copertura con isolamento
sì=1 / no=2
2
Chimney brush
yes=1 / no=2
Kaminbürste
ja=1 / nein=2
Brosse à cheminée
oui=1 / non=2
Spazzola camino
sì=1 / no=2
2
Holder with magnet
yes=1 / no=2
Handschuh mit Magnet
ja=1 / nein=2
Gant de protection avec
aimant oui=1 / non=2
Presina con calamita
sì=1 / no=2
1
Komenského 325, 742 01 Suchdol n. O.
Production number
Thermal output 8 kW
Efficiency 78
%
CO emissions at 13% O
2
1189
mg/m
3
Dust at 13% O
2
26
mg/m
3
Fuel
Wood; Pressed fuel
Waste air temperature 314,9 °C
Safe distance from flammable materials:
Front 80 cm
Side 10 cm
Back 10 cm
Before the first heating read the operation instructions and observe the operation
precautions contained in them! Only use the prescribed fuel! The appliance is not
designed for permanent heating operation! The equipment cannot be connected to a
common chimney!
EN 13 240
DIN 18 891
15a B-VG
Typ
LUGO
05
CE VKF
Komenského 325, 742 01 Suchdol n. O.
Numéro de fabrication
Puissance 8 kW
Efficacité 78
%
CO Emission au 13% O
2
1189
mg/m
3
Poussière au 13% O
2
26
mg/m
3
Carburant
Bois; Bois briquette
empérature des gaz d`évacuation 314,9 °C
Distance de sécurité matériaux inflammables:
Avant 80 cm
Latéralement 10 cm
Arrière 10 cm
Avant de chauffer pour la premičre fois, veuillez étudier le guide d’utilisation et
especter les principes de fonctionnement indiqués! N’utilisez que le combustible
prescrit! L’appareil n’est pas conçu pour une combustion continue! L’appareil ne peut
ętre raccordé ŕ à une cheminée commune!
EN 13 240
DIN 18 891
15a B-VG
Typ
LUGO
05
CE VKF
Komenského 325, 742 01 Suchdol n. O.
Numero di produzione
Performance 8 kW
Efficienza 78
%
Emissioni di CO 13% O
2
1189
mg/m
3
Polvere di 13% O
2
26
mg/m
3
Combustibili
Legno, Bricchette di legno
Temperatura del gas di scarico 314,9 °C
Distanze di sicurezza da eventuali materiali infiammabili:
Avanti 80 cm
Indietro 10 cm
Dietro 10 cm
Leggere attentamente il Libretto d’uso prima della prima accensione ed osservare i
principi di funzionamento! Utilizzare solo combustibile prescritto! Il prodotto non è
indicato per essere acceso in continuazione! Il prodotto non può essere collegato alla
canna fumaria comune!
EN 13 240
DIN 18 891
15a B-VG
Typ
LUGO
05
CE VKF
Komenského 325, 742 01 Suchdol n. O.
Fertigunsnummer
Leistung 8 kW
Wirkungsgrad 78
%
CO Emission bez.auf 13% O
2
1189
mg/m
3
Staub bez.auf 13% O
2
26
mg/m
3
Brennstoffe
Holz, Baunkohlenbriketts
Abgastemperatur 314,9 °C
Sicherheitsabstand von brennbaren Werkstoffen:
Vorne 80 cm
Seitlich 10 cm
Hinten 10 cm
Lesen Sie vor dem ersten Einheizen die Bedienungsanleitung und halten Sie sich an die
angeführten Betriebsgrundsätze! Verwenden Sie nur vorgeschriebene Brennstoffe! Das
Verbrauchsgerät ist nicht für einen Dauerheizbetrieb geeignet! Das Verbrauchsgerät darf
nicht an einen gemeinsamen Rauchfang angeschlossen werden!
EN 13 240
DIN 18 891
15a B
-
VG
Typ
LUGO
05
CE VKF
Technical sheet, Technisches Datenblatt, Fiche technique, Scheda tecnica
LUGO 01 - Dimensionsketch,Maßzeichnung,
Croquisdesdimensions,Dimensioni ingombro
Description EN: Beschreibung DE: Description FR : Descrizione IT:
A 150 mm
Flue throat Flue Hals Flue la gorge Fumi gola
B
φ120mm
CAI inlet CPV-Eingang Entrée AAC Ingresso ACA
C 1 + 2
Air regulation Luftregulierung Régulation d’air Regolazione aria
D
Ashtray Aschenbecher Cendrier Posacenere
LUGODesign
Description EN: Beschreibung DE: Description FR : Descrizione IT:
E Design
Ceramics Keramik Céramique Ceramica
F Design
Stone Stein Pierre Pietra
G Design
Sheet steel Blech stahl Tôle d'acier Lamiera d'acciaio
H Design
Sandstone Sandstein Grès Arenaria
Air regulation, Luftregulierung,
Régulation d’air, Regolazione aria
0 2 2 + 1
Chamottechamber,Schamottkammer, Âtreenchamotte,Camera chamotte
EN – Procedure for exchange of chamottes:
1). Incline and remove the ceiling chamotte - 1
2). Incline and remove the side chamottes – 2
3). Incline and remove the back chamottes – 3
4). Incline and remove the ceiling chamotte - 4
5). Use the reverse order for re-assembly
Note: Cracks in the chamotte do not have any effect on the
combustion and service life of the stove. The chamottes
should not remain crumbled to the metal for prolonged
periods of time.
Warning: When stoking logs, make sure they do not hit the
chamottes hard to prevent damage!
DE - Vorgang beim Austausch der Schamottblöcke:
1). Deckenschamottblock neigen und herausziehen - 1
2). Seteinschamottblöcke neigen und herausziehen - 2
3). Rückwandschamottblöcke neigen und herausziehen – 3
4). Deckenschamottblock neigen und herausziehen - 4
5). Wiedereinbau in umgekehrter Reihenfolge
Bemerkung: Ein einzelner Sprung hat keinen Einfluss auf das
Brennverhalten sowie die Haltbarkeit des Ofens Die
Schamottblöcke sollten nicht langzeitig bis auf das Blech
herausgebröckelt bleiben
Hinweis:
Beim Zulegen mit den Holzscheiten nicht
heftig an den Schamott stoßen und diesem hiermit
beschädigen!
FR‐Procédé pour changer les chamottes :
1). Basculer et retirer les chamottes de plafond - 1
2). Basculer les chamottes latérales et les retirer
-2
3). Basculer les chamottes arrière et les retirer
3
4). Basculer et retirer les chamottes de plafond - 4
5). Montage à l’envers dans l’ordre inverse
Remarque : Une fissure isolée sur la chamotte n’influe pas sur la
combustion ni la durée de vie du poêle.
Les chamottes ne devraient pas rester à long terme égrenées
jusqu’à la tôle
Avertissement : Rajoutez les bûches de façon à ce qu’elles ne
frappent pas brusquement les chamottes, cela les abimerait !
IT – Procedimento per la sostituzione dello chamotte
1). Inclinare ed estrarre lo chamotte superiore - 1
2). Inclinare ed estrarre gli chamotte laterali – 2
3). Inclinare ed estrarre gli chamotte posteriori – 3
4). Inclinare ed estrarre lo chamotte superiore - 4
5). Il rimontaggio si effettua nell’ordine inverso
Nota: Le eventuali screpolature dello chamotte non hanno alcuna
influenza né sulla combustione né sulla vita utile della stufa. Si
consiglia di non lasciare gli chamotte a lungo sgretolati fino alla
lamiera.
Avvertimento: I pezzi di legno vanno applicati in modo tale da
non farli urtare bruscamente contro lo chamotte, per evitare
conseguenti danneggiamenti!
EN General installation and operation manual
for Romotop fireplace stoves
- valid in general for all types of fireplace stoves manufactured by Romotop spol. s.r.o.
The attached technical sheet lists detailed technical data for each type of fireplace stove.
The fireplace stoves may only be operated in accordance with this manual!
No unauthorized changes may be performed on the fireplace stoves!
1. Introduction
2. Technical description
3. Safety regulations
3.1 Safe distances
3.1.1 Safe distance of fireplace stoves from flammable materials
3.1.2 Safe distance of flue pipes from flammable materials and building constructions
3.2 Floor protection
3.3 Chimney fire prevention measures
4. Assembly regulations
4.1 General
4.2 Chimney connection
4.3 Connection of fireplace stoves with exchanger to the heating system
5. Operation manual
5.1 Fuel
5.2 Starting the fireplace stove for the first time
5.3 Kindling and firing
5.4 Stoking fuel
5.5 Operation during the transition period
5.6 Ash removal
5.7 Cleaning the glass
6. Cleaning and maintenance
6.1 Cleaning the fireplace stoves / disassembly of chamotte
6.2 Cleaning the warm water exchanger
6.3 Cleaning the chimney
7. Disposal of covers and the discarded product
8. Repairs and warranty claims
9. Warranty certificate
10. Transfer protocol
1. Introduction
Thank you for purchasing our fireplace stove and congratulations for becoming the owners of top-notch
fireplace stoves by Romotop spol. s.r.o., one of the forefront European manufacturers of fireplace heaters.
Our fireplace stoves can function as additional heating to augment the atmosphere of your home or
recreational building or as the main source of environmentally-friendly heating with high heat output, dust-free
operation and perfect combustion. All fireplace heaters produced by our company are tested in accordance with
ČSN EN 13 240/2002 or ČSN EN 13 229/2002.
Please read through the manual and technical sheet thoroughly. The user is obliged to get properly acquainted
with proper installation and operation of this device with regards to its safe operation. Please keep the manual
and technical sheet so that you can brush up all the information necessary for the correct operation of your
fireplace stove before each heating season.
We only provide a warranty on our products if all the instructions listed in this operation manual are adhered to.
2. Technical description
Fireplace stoves are intended for installation into various interiors (apartments, recreation buildings,
restaurants). Romotop fireplace stoves are manufactured from quality construction materials – cast metal,
CORTEN steel and quality construction and fittings steel, with stressed parts made of HARDOX steel. The
surface of steel constructions is protected by a refractory opaque paint. Refractory paints are not anti-corrosive.
The combustion chamber of full-plate fireplace stoves is padded by removable chamotte desks, which are not
connected by any paste material to prevent damage by heat dilatation. The combustion chamber can be firmly
closed by doors with special heat-resistant glass. The glass not only increases the aesthetics of the flickering
flames, but also facilitates pleasant heat radiation. The glass also prevents the sparks from the burning wood and
smoke from entering the room. The floor of the combustion chamber is usually equipped with a removable cast-
iron grate. Usually, a barrier, or alternatively a sheet metal or ceramic mould, is placed in front of the grate to
prevent the fuel falling and sliding onto the doors (front window). Grate fireplaces include room for an ashpan
under the grate. Some types allow custom-configuration of the flue pipe throat for top- or back-side exhaustion.
The fireplace stoves are manufactured with dual coating. The area between the coatings is used for air heating.
The upper part of the outer coating includes vents for the heated air. The outer coating may include ceramics or
stone to highlight the design and improve the heat accumulation properties of the fireplace stove. Some types of
fireplace stoves have adapted the double-coating construction to heat warm service water with an optional
connection to the standard heating system. These fireplace stoves may be equipped with a cooling loop to avoid
overheating in case of power outages.
Fireplace stoves equipped with a separate intake of primary and secondary combustion air include the
appropriate control elements. The primary air is taken to the burning fuel (usually through the ashpan and grate)
and is used for primary combustion. The secondary air supports combustion of residual combustible gases in the
exhaust, increasing the output of the heater and significantly reduces the amount of pollutants escaping into the
atmosphere. The secondary air is mostly taken to the area above the burning fuel. Its presence causes the cold
air to roll around the inner side of the front glass. This process simultaneously prevents the blackening of the
front glass. The secondary air also participates in the primary combustion process when the primary air intake is
partially or completely sealed. Keep the primary air intake fully open at the beginning of the combustion
process, when the chimney draft is still weak. After the chimney heats up, you can partially or even completely
close the primary air intake, based on the target output of the fireplace stove. It is also possible to reduce the
fueling or limit the chimney draft by attaching a smoke shutter (a manual shutter in the flue pipe limiting the air
intake to at most 75%) to reduce the output of the fireplace stove. This is recommended especially for chimney
draft around and above 20Pa. The secondary damper is intended to fully close the stove when it is not in
operation. The fireplace and ashpan covers must always be closed except for starting operation, adding fuel and
removing solid combustion remnants to prevent exhausts entering the room.
Some fireplace stoves are equipped with a heat accumulation exchanger, improving the efficiency of the
fireplace stoves and maximally utilizing the fuel energy.
Some fireplace stoves are manufactured with a central air intake (CAI). This allows air to flow into the
combustion chamber in the fireplace stove from the exterior, halls, technical rooms etc. Fireplace stoves with a
CAI are not dependant on the amount of air in the heated area. Thus, they not only contribute to a pleasant
atmosphere in your home, but also reduce energy expenses (since heated air already in the room is not
consumed).
Fireplace stoves with CAI are very suitable for installation into low-energy houses. It is also possible to
equip the heating system of some fireplace stoves with CAI with electronic combustion regulation to increase
comfort. This can additionally increase the combustion process and stoking intervals, increase operation safety
and prevent uneconomic heating and over-heating of fireplace stoves (the shutter of the central air intake is
controlled by a control unit and servomotor in relation to the current combustion phase and output exhaust
temperature).
Warning: The fireplace stoves are not manufactured to provide continual heating and are intended for
periodic interrupted operation, mostly due to the need to empty the ashpan when the ash has cooled down.
3. Safety regulations
The fireplace stoves may be used in normal environments in accordance with ČSN 33 2000-3/1995. In case
of change of environment that could cause a temporary danger of fire or explosion (e.g. gluing linoleum, PVC,
working with paints, etc), the fireplace stove must be put out of operation in time, i.e. before the occurrence of
the dangerous situation. Furthermore, the fireplace stoves can be used only after the room is thoroughly aired,
preferably by wind draft.
A supply of sufficient amount of combustion air and room ventilation air must be ensured when the fireplace
stoves are in operation, especially with another heat device running simultaneously (approx. 8 to 15 m
3
for
burning 1 kg of fuel)! When doors and windows are tightly sealed, this might not be the case! This is solved by
a CAI connected into a separate room. The regulation grate for combustion, ventilation and heating air must not
be obstructed. When stoking fuel, always open the door very slowly. You will prevent smoke and ash from
escaping into the room. The fireplace stoves require casual attendance and inspection.
Flammable fuels must not be used for stoking or heating! In addition, burning plastic material of any kind,
wood materials with various chemical bonding agents (chipboards, etc) or unsorted domestic waste with
remaining plastics is prohibited by law no. 201/2012.
Make sure to prevent children from handling the fireplace stoves during heating. The fireplace stove
may only be operated by an adult person!
During heating all handles and knobs must be operated using a pair of tongs, hook or by a hand protected by
a glove (pot-holder) - there's a danger of burns! Objects made from flammable materials that could be set on fire
must not be stored on the fireplace stoves during operation and while hot. Please pay special attention when
handling the ashpan and when removing hot ash due to danger of burns! The hot ash must not get in contact
with flammable objects - e.g. when throwing in communal waste containers.
When the fireplace stove is used only seasonally and with unfavorable draft or weather conditions, special
attention must be paid when putting the stove into operation. When the fireplace stove is not in operation for a
longer period of time, the flue ways must be checked for obstructions before further operation.
The appropriate safety regulations for fireplace stove operation and installation must be adhered to in
accordance with ČSN 06 1008/1997, especially:
3.1 Safe distance:
3.1.1 Safe distance of fireplace stoves from flammable materials
When installing the fireplace stove in a place containing flammable materials belonging to class B, C1 and
C2, the required safe distance in accordance with ČSN 06 1008/1997 is 80cm from doors and 20cm in other
directions.
When installing the fireplace stove in a place containing flammable materials belonging to class C3, the
distance must be doubled. Information on the degree of flammability of certain building materials is listed in
ČSN 73 0823/1983. When the prescribed safe distance of the heater from the flammable materials cannot be
kept, it is necessary to use a protective screen according to 4.4.1 ČSN 06 1008/1997.
Building materials sorted by grade of flammability
A non-flammable granite, sandstone, concrete, bricks, ceramic tiles, special plasters
B not easily flammable Akumin, Heraklith, Lignos, Itaver
C1 hardly flammable hardwood, plywood, Sirkolit, hardened paper, Umakart
C2 medium flammable chipboards, Solodur, cork boards, rubber, flooring
C3 easily flammable fibreboards, polysterene, polyurethane
Figure 1
3.1.2 Safe distance of chimneys from flammable materials and building constructions
The safe distance from door case covers and similarly located building constructions from flammable
materials and from pipeline installation including its insulation is at least 20cm. The safe distance from other
flammable parts of the building construction at least 40cm (see fig.2) according to ČSN 06 1008/1997. This
includes building materials belonging to classes B, C1 and C2 as defined in ČSN EN 13501-1/2010 (see table
no.1) The same applies for walls and especially ceilings with plaster on a flammable surface, e.g. crates, planks,
etc.! When the prescribed safe distances cannot be kept, the danger of fire must be prevented through
construction solutions, non-flammable applications, heat-resistant insulations or protection screens.
3.2 Floor protection
Unless the fireplace stove is installed on a 100% non-flammable floor, it is necessary to place the stove on a
non-flammable insulation mat, e.g. metal plate (at least 2mm thick), ceramics, hardened glass, stone, in order to
prevent the flammable floor to exceed a temperature of 50°C during operation in accordance with ČSN 73
4230/2004.
According to 5.1.3.3 of ČSN 06 1008/1997, the insulation mat must exceed the fireplace by at least
- 30cm in the vertical direction from the stove stoking door.
- 10cm in the horizontal direction from the stove stoking door.
Wall
Stove heater
Minimaldistances:
A>80cm
B>20cm
Items made of flammable materials may not be placed on top of or at a less-than-safe distance from the
fireplace stoves.
3.3 Chimney fire prevention measures:
Ordinary operation, especially with humid fuel, leads to the settling of ash and tar in the chimney. Neglecting
regular checking and cleaning of the chimney in accordance with the government regulation no. 91/2010
from 1
st
March 2010 supplying regulation no. 111/1998 Coll. increases the danger of fire.
In case of ash or tar catching fire in the chimney, please follow this procedure:
- do not under any circumstances extinguish the fire with water as it would create an abnormal amount of
steam and subsequently rip the chimney open
- if possible, the combustion chamber should be covered with dry sand, which will extinguish the fire
- close all intakes of air for combustion; if possible, cover the chimney. However, the smoke must not
accumulate back in the house
- contact your nearest fire fighting brigade to assess the situation and the necessity to report it as a fire
fighting emergency
- do not leave the house until the chimney is burned up; regularly check the chimney temperature and the
course of combustion
- contact a chimney service before starting a new fire in the stove to assess the state of the chimney and also
contact the manufacturer of the fireplace stove for inspection.
4. Assembly regulations
Warning: All local regulations, including regulations concerning national and European standards for
this type of appliances, must be adhered to:
ČSN 73 4230/2004 - Fireplaces with open and closable furnace
ČSN EN 13229/2002+A1/2003+A2/2005 - Built-in heating appliances and open fire inserts for solid fuel
ČSN EN 13240/2002+A2/2005 - Room heaters fired by solid fuel
ČSN 73 4201/2010 - Chimneys and connecting flue pipes - Design, construction and installation of heating
appliances
ČSN EN 1443/2004 - Chimneys – General requirements
ČSN EN 13501/2010 - Fire classification of construction products and building elements
ČSN 06 1008/1997 - Fire protection of heating appliances
4.1 General
The fireplace stoves must be installed on a floor with an adequate bearing capacity. If the existing
arrangement does not meet this basic requirement, necessary steps must be taken (e.g. using a mat for
distributing the load). Make sure that there is enough space for cleaning the fireplace stove, connecting flue
pipes and the chimney unless the chimney can be cleaned from other place, e.g. a roof or through doors
designed for this purpose.
4.2 Chimney connection
Before assembling the closed fireplace stove it is necessary to calculate that the chimney construction will be
suitable for the installed fireplace stove nominal output as far as design, vent size and effective height are
concerned.
A suitable chimney (minimum profile, chimney draft, tightness, etc.) is a basic condition for the proper
functioning of the fireplace stoves. You should therefore contact a chimney sweeper before installing the
fireplace stove. Chimney values are included in the attached technical sheet. A smoke shutter or a draft regulator
should be installed for chimneys with too strong a draft. Such a draft can cause problems during operation, e.g.
intensive burning, high fuel consumption and can also lead to permanent damage of the fireplace stove.
The minimum effective height of the chimney for exhaust gas from the stove is 5m (measured from the hoop
to the chimney mouth). The chimney entry must be equipped with a chimney hoop. Consult the vent connection
with the vent manufacturer. The vents must lead at least 5cm below the lower ceiling. Connect the flue mouth
with the chimney in the shortest possible way so that the flue length is at most 1/4 of the effective height of the
chimney (i.e. 1.5m). Connect the flue tube and the knee together with an overlap in such a way that the
connections always agree with the exhaust gas flow, or abut using the connection rings. If the connecting piece
passes through construction elements with flammable materials, it is necessary to use protective measures in
accordance with ČSN 06 1008/1997. The norm states that the flue pipe needs to rise to the vents in the direction
of exhaust flow with a degree of at least . The tightness and firmness of the joints is crucial. The chimney and
stove connection must adhere to ČSN 73 4201/2010. The casing of the chimney must not exceed a temperature
of 52°C during the highest operation temperature of the stove. The cross section of the flue pipe vents must not
be larger than the cross section of the chimney vent and it must not narrow down in the direction of the
chimney. If calculations show that the cross section of the flue pipe and chimney vent could be smaller than the
cross section of the exhaust throat of the fireplace stove, the cross section of the flue pipes will be lowered
immediately behind the exhaust throat of the fireplace stove, either gradually or at a discrete point. The flexible
flue pipe from the materials in accordance with table A.1. may only used in places where it may be checked in
accordance with 7.2.1 ČSN 73 4201/2002, and unless the flue pipe leads through an open air its checkability
must be ensured in accordance with 7.2.5 ČSN 73 4230/2002. A vertical flue pipe may only be used in the cases
listed in 8.3.4 and 8.3.5 ČSN 73 4230/2002.
The fireplace stove may be connected to a shared vent with a gas appliance for multi-layer chimneys in
accordance with ČSN 73 4201/2002.
4.3 Connection of fireplace stoves with exchanger to the heating system
Warning: Always have a specialist company take care of the project and assembly of your warm water
system and warm service water container
When installing the warm water system, it is necessary to adhere to the appropriate regulations listed in the
following norms and to respect the requirements on heat systems in buildings:
ČSN 06 0830/2006 Safety devices for central heating and heating of service water
ČSN 06 0310/2006 Project and assembly
ČSN 06 0320/2006 – Preparation of warm water – design and project
ČSN EN 12 828/2005 Designing warm water heat systems
ČSN EN 13 240/2002+A2/2005 - Room heaters fired by solid fuel
ČSN EN 13 229/2002+A2/2005 - Built-in heating appliances and fireplace stoves for solid fuel
Warning: Article 3 par. 2.3 council regulation no. 97/23/EC "Pressure equipment" (corresponds to
government regulation no. 26/2003 - previously government regulation no. 182/1999) adjusts the need to equip
fireplace stoves and fireplace inserts with exchangers (with manual stoking of solid fuel for the production of
warm water with temperatures below 110°C) with a safety fuse against overheating. If the fireplace stove with
exchanger or fireplace insert with exchanger is not equipped with this fuse, then it is not required on the
product!
The fireplace stove exchanger needs to be connected with the warm water system via a screwed joint. To this
end the fireplace stove exchanger is equipped with screwed outlets. If you require off-season infrequent heating
only in the room containing the fireplace stove, it is necessary to “redirect” the exchanger output so that other
heat appliances do not overheat (e.g. water container). We always recommend connection with an
accumulation tank to ensure comfortable heating and a maximal utilization of the heat energy. Heating systems
with forced circulation can be secured against overheating e.g. via an open expansion tank or cooling loop. In
case of electricity outage it is recommended to use a backup supply for the circulation pump. We recommend
equipping heaters with thermostatic heads (especially in the area where the fireplace stove is located).
Heating systems with forced circulation are susceptible to overheating, most often due to power outages. If
the circulation pump stops, the water temperature in the exchanger will start to raise rapidly, since the heat is not
being drained anymore. Romotop strongly recommends installing one of the systems for preventing the
overheating of heating systems.
Recommended systems for preventing the overheating of heating systems:
Cooling loop – in case of a power outage and if the exchanger heats up above a safe bound, the
cooling vent will release cold water from the water supply into the loop located in the exchanger. The
cold water will drain the heat from the exchanger into waste water (see Connection chart with
cooling loop).
DBV cooling valve – in case of power outage and if the exchanger heats up above a safe bound, the
overheated water is drained as waste water and cold water is released simultaneously into the heating
system (see Connection chart with DBV cooling valve).
Backup generator – allows the pump to operate for a short while during power outages to let the
fireplace insert to cool off.
Warning: The cooling exchanger (loop) and the DBV cooling valve are designed to fully protect the
exchanger against overheating. Its proper operation and connection is conditioned by a cold water intake with a
permanent minimal pressure of 2 bars and temperature of up to 15°C, i.e. the water supply must not depend on
power outages (preferably the water system). Cooling water from the cooling exchanger is drained as waste
water.
Securing the heating system against high pressure
We recommend using a safety valve for securing the heating system against high pressure. It is placed on the
hot water outlet from the exchanger. No closable piping may be installed between the exchanger and the safety
valve. The maximal distance of the safety valve from the source is 20xDN. The safety valve should be easily
accessible to allow regular inspection of functionality.
Installation of this safety valve is a required condition for the warranty of fireplace stoves with a warm
water exchanger.
Protecting the exchanger from low-temperature corrosion
To prevent the creation of condensate on the walls of the exchanger, it is necessary to always equip the
heating system of warm water fireplace stoves with a thermostat mixing valve, which keeps the water
temperature at the inlet to the exchanger at a minimal value of 65°C. Protection from low-temperature corrosion
will increase the service life of the exchanger. To improve the heat-up and combustion phases in forced systems,
we recommend installing a switchable thermostat for the pump.
Installation of thermostat exchanger valve is a required condition for the warranty of fireplace stoves
with a warm water exchanger.
Warning:
The outlet vent must be installed in the lowest part of the heating system.
Warning:
The fireplace stove with exchanger may not be used without connection to the warm water system
and when not filled with the heat carrying medium, i.e. water or frost-resistant filling recommended for this
purpose. These fillings must adhere to norm ČSN 07 7401/1992 (Water and steam for thermal energy
equipment) to keep a long service life.
For more information please see the information sheet available for download at www.romotop.cz:
Construction readiness for Romotop fireplace stoves, or contact us directly on our Romotop service line (see
www.romotop.cz).
5. Operation manual
5.1 Fuel
It is only allowed to burn wood and wood briquettes in fireplace stoves in accordance with law 201/2012. To
reach the nominal parameters of the heater, we recommend using dry logs with a diameter of 5-8 cm and length
of 20-30 cm and with a humidity below 20% (ideally 10%), or compressed wood briquettes. Oven wood and
chopped pieces of wood should be used only when starting the fire. Recommended humidity can be obtained by
storing the chopped logs for at least two years in a ventilated shelter. Wood briquettes must be stored in a dry
place, otherwise they might fall apart.
The fireplace stove should be heated to a nominal output stated in the technical sheet, i.e. the burning of a
given amount of allowed fuel per 1 hour. Long-term excessive output could damage the fireplace stove.
Never use flammable fluids, coke, coal or any of the following types of waste as fuel: chipboards,
plastics, plastic bags, soaked wood or wood-shavings, saw-dust or pellets!
!!!Burning of the abovementioned material not only highly pollutes our environment but also damages
the fireplace stove and the chimney!!!
5.2 Starting the fireplace stove for the first time
Before the first use all remaining stickers must be removed, all accessories must be taken out of the ashpan or
fireplace and the same applies for the transport safety pins. Check that bulk shutters for directing the draft,
chamotte tiles and the barrier are set correctly (as they might have slipped from their correct positions during
transport or installation). Repair any defects you might find in setting, otherwise the proper functioning of the
heater is endangered. After setting the fireplace stove, connecting it to the chimney and, if need be, connecting
the exchanger to the warm-water set and filling it with a heat-carrying medium, start heating slowly and
continue for at least one hour. Leave the stoves and ashpan doors open (approx 1-2mm) before and during the
first heating in order to prevent the sealing material to mix with the paint. The fireplace surface is covered with
heat-resistant paint. During the first heating, after becoming temporarily soft, the paint will eventually become
hardened. During the soft phase the paint surface is more vulnerable to being damaged by a hand or other object.
During the first heating the fireplace stove should be “heated up” with a small flame, burning only a small
amount of fuel with a lower temperature. All materials must get used to the heat load. You will prevent cracks in
chamotte bricks, damage of the paint or deformation of the insert materials by a careful first heating. Hardening
of the paint on the fireplace stove might be accompanied by a temporary smell, which will disappear after a
while.
Make sure the room is properly aired when burning the paint. Furthermore, ensure that no small
animals or birds are present in the room containing paint exhausts. We also recommend turning off
aquariums air intakes during the first heating.
5.3 Kindling and firing
1. Fireplace stoves with grate - first put crumpled paper into the chamber and then lay chopped wood on it.
You can also used the solid fire-lighter PE-PO to start the fire. After starting fire, let it burn freely with all air
regulation elements open. It is forbidden to use flammable liquid (oil, petroleum, etc.) for starting fire!
After the fire begins to burn and the draft is strong enough, bigger logs or wood briquettes might be added
without the danger of smoke. Continue stoking the amount of fuel determined based on the nominal output of
the fireplace stove.
2. Fireplace stoves without grate - only secondary air is used for burning; therefore wood logs need to be
stoked first, then chopped wood and finally small cuttings and paper. After starting fire, let it burn freely with all
air regulation elements open. It is forbidden to use flammable liquid (oil, petroleum, etc.) for starting fire!
After the fire begins to burn and the draft is strong enough, bigger logs or wood briquettes might be added
without the danger of smoke. Stoke no more than the amount of fuel determined based on the nominal output of
the fireplace stove.
Fuel consumption is always stated in the technical sheet. Burning intensity is regulated by air intake controls
or, if a smoke shutter is installed, by limiting the draft in the chimney. Larger amount of fuel or a strong draft
and air take might cause overheating and damage of the fireplace stove. Too weak draft leads to glass
blackening or to a smoke escaping into the room when opening the door and stoking fuel.
Warning: Fireplace doors must always be closed, with the exception of the first heating, stoking fuel and
removing ash. When the fireplace stove is not in operation for a longer period of time, it is necessary to check
that the flue pipes, chimney and combustion chamber are clear. In general, the heating up and cooling of the
fireplace insert is accompanied by a specific sound; this is intended.
5.4 Stoking fuel
In order to prevent smoke escaping into the room when stoking fuel, please follow the following procedure:
Approximately 5 or 10 seconds before opening the fireplace doors open the air intake regulators and then only
slightly open the stoking doors, wait for few seconds for the exhaust gas to get sucked into the chimney and only
then fully open the door. When opening the stoking door, a special attention must be paid to the danger of hot
fire-brands falling out. After stocking fuel, close the door again. After the fuel starts burning (with clear fire),
return the regulator back to its original position. The amount of stoked fuel should correspond to an hourly
consumption value for the concrete fireplace stove (see the technical sheet). Overheating can permanently
damage the fireplace stove construction.
Warning: To prevent exhaust gas escaping into the room during stoking add fuel after its burning down on
the glowing base.
5.5 Operation during the transition period
The chimney draft (sucking exhaust gas from the fireplace stove) might be weaker during the transition
period, i.e. when the outside temperature is higher than 15°C, during rainy and humid days or during gust airs.
During this period the fireplace stove should be operated with the minimum possible fuel so that the fire, as well
as the chimney draft could be improved by opening the air intakes.
Tip: During this period a so-called atmospheric plug can be created in the chimney mouth due to the draft
conditions. The plug can caused smoke escaping into the room when lighting fuel. We recommend letting a
piece of paper burn down preferably in the upper part of the combustion chamber before lighting the kindling.
This seemingly negligible smoke is enough to break through the atmospheric plug. Afterwards you can freely
light paper (or solid fire-lighter PE-PO) and be sure that even a humid chimney is clear.
In this period it is also possible to use the same lighting method as for the fireplace stoves without grate (with
no ashpan).
5.6 Ash removal
Make sure that the ashpan is cleaned when being half full in order to prevent the ash reaching too close to the
grate and thus damaging it. At the same time the ash would block the intake of air required for burning.
Removing ash from the ashpan should be carried out when the fireplace stove is cold and preferably ready for
the next heating. A vacuum cleaner designed for cleaning ash with a filter for small filth can be also used for
cleaning the cold ashpans or heater without ashpans. Ash from burnt wood can be used for composts or
fertilizing. Store the ash in closed non-flammable containers.
Warning: Make sure that the ash does not contain any glowing remains of wood that could cause fire in the
waste container.
Warning: For some fireplace stove types the ashpan is located in a basin under the grate and cannot be
removed from the side. The ashpan can be removed only when the heater is cold and not in operation. The
ashpan is accessible after lifting the grate.
Be careful when removing hot ash!
5.7 Cleaning the glass
The cleanliness of the window is influenced not only by the using of suitable fuel, providing sufficient air
intake and chimney draft but also by the method of operating the fireplace stove. In this respect we recommend
stoking only one layer of fuel and distributing the fuel as evenly as possible and as far from the glass as
possible. This also applies for briquettes (the distance between them should be 5 to 10 mm). If the glass
becomes dirty, try increasing the burning intensity by opening the air intake and the glass will clean itself.
Sooty windows can be cleaned in cold state using newspapers or wet cloth dipped in wood ash,
alternatively using a special cleaning agent designed for fireplace stoves. While cleaning the glass with chemical
detergents, prevent them from soaking into the insulation cord between the glass and the door frame. Do not use
cleaners that could scratch the window!
6. Cleaning and maintenance
Your fireplace stove is a high-quality product and no significant defects will appear during normal operation.
The fireplace stove and exhaust pipes should be checked thoroughly before and after the heating season.
Clean the fireplace stove only after it cools off!
6.1 Cleaning the fireplace stoves / disassembly of chamotte
All sediments in flue pipes and combustion space must be removed during cleaning. Repair, ideally by
removing, all fallen-off parts of the chamotte lining. The integrity of the chamotte lining must be monitored also
during the heating season. Spaces between individual chamotte fittings serve as a heat dilatation preventing
cracking of the fittings and must not be filled by filling material as was usual with older types of solid fuel
heaters. Cracked chamotte fittings are still functional until they fall out! Bulk shutter for directing the draft,
if used, should be removed during cleaning (this enables easier access to the space above them). The fireplace
stove cleaning (with the exception of glass) should be done without water cleaner, i.e. using only vacuum
cleaner or steel brushes. Any modifications of the fireplace stove are unacceptable. Use only spare parts
approved by the manufacturer. Disassembly of chamotte (see the Chamotte chamber). From time to time the
friction areas of the door hinge and the closing mechanism should be oiled using carbonic fat or grease designed
for high temperatures. Close the fireplace stove with corresponding slide valves when not in operation.
6.2 Cleaning the warm water exchanger
The exchanger vents should be cleaned as required, at least once in 3 week by attached steel brush. The
degree of fouling is influenced by the fuel humidity, methods of operating (e.g. economic operation - closing air
intakes regulators) and by the connection to the heating system, see chapter 4.3. Access to the exchanger vents is
located above the combustion chamber.
Shutters for regulating the draft, if used, must be removed.
6.3 Cleaning the chimney
Each user of a solid fuel heater is obliged to ensure regular checkups and cleaning of the chimney in
accordance with the government regulation no. 91/2010 from 1
st
March 2010 supplying regulation no.
111/1998 Coll.
7. Disposal of covers and the discarded product
Packaging and the discarded product should be liquidated in accordance with law no. 125/1997 Coll. and
related regulations.
Packaging:
a) wooden parts can be used for heating
b) plastic package is to be placed into a container for sorted waste
c) screws and handles are to be taken to a waste collection station
d) bag with the separator of air humidity is to be placed to separated waste
Discarded product:
b) dismantled glass is to be placed into a container for sorted waste
b) sealing and chamotte boards are to be placed into communal waste
c) metal parts are to be taken to a waste collection station
8. Repairs and warranty claims
Service and warranty repairs are provided directly by the manufacturer or through the sales representative.
Warranty certificate, fireplace stove purchase receipt and transfer protocol must be presented when filing a
claim. It is in the purchaser’s interest to demand a legibly filled-in warranty certificate and transfer protocol
upon purchase. The service department will decide about the method and place of repair after inspecting the
defect; furthermore, proposed measures will be consulted with the fireplace stove owner. Relevant provisions of
the Civil Code and the warranty regulations apply for the fireplace stove replacement or termination of the
contract of purchase.
WARRANTY CERTIFICATE
ROMOTOP spol. s r.o. WARRANTY AND CLAIMS CONDITIONS VALID FOR THE
PURCHASER (CONSUMER)
1. The following warranty and claims conditions are processed in accordance with relevant provision of the
Civil code and the Consumer protection act.
2. The seller is obliged, if requested by the consumer, to issue a purchase receipt or service receipt including
date or purchase or service, type of product or service, price of product or service, together with identification
information of the seller, i.e. the name and surname, company name, alternatively their identification number,
address or place of business, unless determined otherwise by a special legal regulation.
3. Warranty period granted for this product is 24 months. The warranty period begins upon accepting the
product by the consumer. For products that need to be put into operation by an authorized or professional
company the warranty period begins only after the product is put into operation, provided the purchaser
ordered the given company to put the product into operation within 3 weeks from accepting the product and
provided all necessary cooperation.
4. Warranty applies to all manufacturing defects and material defects originating provably during the warranty
period.
5. Warranty does not apply to wear and tear and further to:
-defects caused by unsuitable or unprofessional service or modifications, connecting to insufficiently sized
chimney or chimney with low draft, inadequate handling or use, failure to adhere to conditions of use and
maintenance (see Operation manual).
- defects caused by mechanical damage
- when the product is stored in humid and unsheltered place, or is used an environment other than the home
environment.
- defects caused by natural disaster, weather conditions or violent damage.
- when warranty seals or plagues with serial numbers are damaged.
-damage during transport (in case of transport at your own risk). When transported via an external
transportation service - any damage must be dealt with on the spot.
- if the information on the warranty certificate or purchase receipt differs from the data on the manufacturer
plague.
6. Extended warranty period does not apply to expendable material used for the repair or exchange of the stove
part.
7. Warranty must be claimed at the seller, where the product was purchased. However, if the warranty certificate
states a different business for the repair, which is closer to the seller or to the purchaser, the purchaser is to
claim the warranty at the business designated for the repair. The business designated for the repair is obliged
to perform the repair within a time limit arranged between the seller and purchaser.
8. The seller is obliged to issue a confirmation including the date of claim, subject of the warranty and the
required method of settling. Furthermore, another written confirmation must be issued within 30 days on
performing the repair, date and method of settling, including confirmation on performing the repair and its
duration, alternatively a written explanation of warranty refusal. This obligation applies other subject
designed for the repair.
9. Within the first 6 months from the purchase the warranty claim will be treated as a contradiction with the
contract of purchase in accordance with t 616 of the Civil code. In months following afterwards the warranty
claims will be regulated by t 622 of the Civil code, depending on whether the defect is removable or not.
10. Warranty claims are only accepted and processed for the purchaser.
11. When transferring items for warranty, the purchaser is obliged to inform and eventually document the type
label of the product and a detailed description of the defect (e.g. in which mode and how the defect manifests,
how long after combustion, description of operation of the item before the defect etc.).
12. When applying the warranty, the purchaser is obliged to prove that the product is being warranted at its
seller and that the warranty period has not expired. The most suitable documents in this regard are:
- sales document
- confirmed warranty certificate
- confirmed transfer protocol
13. Other procedures not adjusted in these warranty and claims conditions follow the appropriate provisions of
the Civil Law and Consumer Protection Law.
TRANSFER PROTOCOL
Purchaser: .....................................................................................................................
Realization address: .....................................................................................................
.........................................................................................................
Contractor (person responsible for construction): ...................................................
.........................................................................................................
List of documents: ........................................................................................................
.........................................................................................................
.........................................................................................................
List of defects and outstanding work: ........................................................................
.........................................................................................................
List of variations from the project (the approved documentation): .......................
.........................................................................................................
.........................................................................................................
Construction permit no.: .............................................................................................
Date: ......................................... Issued by: .........................................................
Technical supervision of the investor: ........................................................................
Date of commencement of transfer: ...........................................................................
Date of termination of transfer: ..................................................................................
Date of complete clearing of the workplace: .............................................................
Warranty begins on: ....................................................................................................
First combustion allowed on: ......................................................................................
The purchaser confirms by signature that he will be responsible for ensuring
the security of the received building from third persons!!!
Contractor (signature): ............................. Date: .............. In ......................
Purchaser (signature): ............................... Date: .............. In ......................
DE Allgemeine Einbau- und Bedienungsanleitung für Kaminöfen
der Firma Romotop spol. s r.o.
- gilt allgemein für alle, von der Firma Romotop spol. s r.o. hergestellten Kaminöfen.
Im anliegenden technischen Datenblatt sind ausführlich technische Daten des jeweiligen Kaminofentyps
angeführt.
Die Kaminöfen dürfen nur nach dieser Anleitung betrieben werden!
Es ist nicht zulässig, bei den Kaminöfen beliebige Anpassungen vorzunehmen!
1. Einleitung
2. Technische Beschreibung
3. Sicherheitsvorschriften
3.1 Sicherheitsabstände
3.1.1 Sicherheitsabstand eines Kaminofens im Raum von brennbaren Werkstoffen
3.1.2 Sichere Abstände der Rauchgasleitungen von brennbaren Werkstoffen und Baukonstruktionen
3.2 Fußbodenschutz
3.3 Maßnahmen bei Kaminbrand
4. Montagevorschriften
4.1 Allgemein
4.2 Anschluss an den Kamin (Schornstein)
5. Bedienungsanleitung
5.1 Brennstoff
5.2 Erste Inbetriebnahme des Kaminofens
5.3 Einheizung und Heizung
5.4 Brennstoffzulegung
5.5 Betrieb im Laufe des Übergangszeitraum
5.6 Beseitigung der Asche
5.7 Reinigung der Glasscheibe
6. Reinigung und Instandhaltung
6.1 Reinigung des Kaminofens / Ausbau der Schamottblöcke
6.2 Reinigung des Kamins
7. Entsorgung der Verpackung und des ausgesondertes Produkts
8. Reparaturen und Reklamationen
9. Garantieurkunde
10. Übergabeprotokoll
1. Einleitung
Wir bedanken uns bei Ihnen, dass Sie eben unseren Kaminofen beschafft haben und gratulieren Ihnen
zugleich herzlich, denn Sie sind zum Inhaber eines Qualitätskaminofens der Firma Romotop spol. s r.o., eines
führenden europäischen Kaminofenherstellers geworden.
Unser Kaminofen kann nicht nur als eine zusätzliche Heizung dienen, welche die Atmosphäre Ihres Heims
bzw. Ihres Erholungsobjekts steigert, sondern auch als Hauptwärmequelle mit hoher Heizleistung, staublosem
Betrieb und vollkommener, umweltfreundlicher Verbrennung. Alle von unserer Firma hergestellten Kaminöfen
werden gemäß ČSN EN 13 240/2002 bzw. ČSN EN 13 229/2002 geprüft.
Lesen Sie die Anleitung und das technische Datenblatt im eigenen Interesse sorgfältig durch. Bezüglich des
sicheren Betriebs hat sich der Benutzer ordnungsmäßig über den richtigen Einbau und Betrieb dieser
Einrichtung zu informieren. Bewahren Sie die Anleitung und das technische Datenblatt auf, um zu Beginn jeder
Heizsaison wieder die erforderlichen Kenntnisse für die richtige Bedienung Ihres Kaminofens auffrischen zu
können.
Garantie für unsere Produkte gewähren wir nur im Falle, dass Sie die in dieser Bedienungsanleitung des
Kaminofens angeführten Anweisungen einhalten.
2. Technische Beschreibung
Der Kaminofen ist für den Einbau in unterschiedliche Innenräume (Wohnungen, Wochenendhäuser,
Restaurants) bestimmt. Die Kaminöfen Romotop werden aus hochwertigen Werkstoffen hergestellt -
Gusseisen, CORTEN-Stahl und aus Qualitätsbaustahl und Kesselstahl, die hoch belasteten Bauteile werden aus
HARDOX-Stahl produziert. Die Stahlkonstruktionsoberflächen sind mit feuerfestem Mattlack geschützt. Der
feuerfeste Lack ist nicht korrosionsbeständig. Der Brennraum des Vollblech-Kaminofens ist mit
herausnehmbaren Schamottplatten ausgekleidet, die nicht mit Füllmasse verbunden sind, um deren
Beschädigung infolge von Wärmedehnungen vorzubeugen. Der Brennraum ist mit einer Tür mit speziellem
feuerfestem Glas versehen. Das Glas erhöht nicht nur das ästhetische Erlebnis beim Anblick des lodernden
Feuers, sondern ermöglicht auch eine angenehme Übertragung der Wärmestrahlung. Das Glas verhindert
zugleich das Herausfallen von Teilen des brennenden Holzes und Austritt von Rauch in den Raum. Der
Feuerraumboden ist in der Regel mit einem herausnehmbaren Eisengussrost versehen. Vor dem Rost ist in der
Regel eine Sperre gegen das Herausfallen und Abrutschen des Brennstoffs auf die Tür (Türscheibe) ggf. eine
Blech- bzw. Keramikmulde angebracht. Bei Feuerräumen mit Rost befindet sich unter dem Rost ein Raum für
den Aschekasten. Bei bestimmten Kaminofentypen kann der Abgasrohrstutzen nach Bedarf für obere sowie
untere Rauchabführung eingestellt werden. Die Kaminöfen werden in Doppelmantelausführung hergestellt. Der
Raum zwischen den Mänteln wird zur Lufterwärmung genutzt. Der Außenmantel ist im oberen Bereich mit
Warmluftausströmern versehen. Der Außenmantel kann mit Keramik bzw. Stein verkleidet werden, um den
Design zu prägen und die Wärmespeichereigenschaften des Kaminofens zu verbessern. Bei bestimmten
Kaminofentypen ist die Doppelmantelkonstruktion der Erwärmung von warmem Brauchwasser angepasst, mit
der Anschlussmöglichkeit an ein standardmäßiges Heizsystem. Diese Kaminöfen können mit einer
Abkühlschleife gegen Überhitzung bei einem Stromausfall bestückt werden.
Kaminöfen, die mit getrennter Primär- und Sekundärverbrennungsluft versehen sind, sind mit
entsprechenden Bedienungselementen ausgestattet. Die Primärluft wird direkt zum brennenden Brennstoff
geführt (in der Regel durch den Aschekasten und Rost) und diese Dient der primären Verbrennung. Die
Sekundärluft unterstützt die Verbrennung der restlichen brennbaren Gase im Rauchgas, infolgedessen die
Heizleistung des Kaminofens erhöht wird, was grundsätzlich den Austritt von Rauchgasemissionen in die
Atmosphäre reduziert. Die Sekundärluft wird vor allem in den Raum über dem brennenden Brennstoff geführt.
Durch die Sekundärluft wird die kalte Luft auf der Innenseite der Frontscheibe mitgerissen. Dieser Prozess
verhindert zugleich das Verrußen der Glasscheibe. Die Sekundärluft beteiligt sich beim Sperren der Primärluft
ebenfalls an der primären Verbrennung. Lassen Sie die Primärluftzufuhr beim Anheizen, bei dem noch niedriger
Kaminzug vorhanden ist, ganz offen. Nach dem Erwärmen des Kamins können Sie die Primärluftzufuhr zum
Teil bzw. ganz sperren, je nach der erforderlichen Leistung des Kaminofens. Für die Leistungsreduzierung des
Kaminofens kann auch eine niedrigere Brennstoffmenge gewählt bzw. der Kaminzug durch den Einbau einer
Mindestabstand
A > 80cm
B > 20cm
Rauchklappe (manuelle Sperrklappe in der Rauchabfuhr, die den Luftkanal max. zu 75% versperrt) reduziert
werden. Das ist vor allem bei einem Kaminzug um und über 20 Pa empfehlenswert. Der Sekundärluftschieber
ist für vollständiges Sperren des Kaminofens außer Betrieb bestimmt. Der Feuerraum und die
Aschekastenabdeckung müssen stets geschlossen sein, mit Ausnahme der Inbetriebnahme, Brennstoffzulegung
und Beseitigung fester Verbrennungsreste, um den Rauchgasaustritt in den Raum zu verhindern.
Bestimmte Kaminofentypen sind mit einem Wärmespeichertauscher versehen, was anschließend deren
Leistung erhöht und der zur maximalen Nutzung der Brennstoffenergie beiträgt.
Bestimmte Kaminofentypen werden mit zentraler Luftzufuhr (CPV) hergestellt. Diese ermöglicht die Zufuhr
von Verbrennungsluft in den Feuerraum vom Außenbereich, aus Fluren und Technikerräumen. Ein Kaminofen
mit CPV ist nicht von der Luftmenge im beheizten Raum abhängig. Sie leisten somit nicht nur einen Beitrag zur
Erhaltung eines angenehmen Klimas in Ihrem Heim, sondern reduzieren auch die Energiekosten (im Haus wird
die bereits einmal erwärmte Luft nicht verbraucht).
Kaminöfen mit CPV sind für den Einbau in energiearme Häuser äußerst geeignet. Für Erhöhung des
Komforts kann das Heizsystem bestimmter Kaminöfen mit CPV mit elektrischer Verbrennungsregelung
versehen werden. Diese ermöglicht, zusätzlich den Verbrennungsprozess und Zulegungsintervall zu verlängern
und die Betriebssicherheit zu erhöhen und somit unwirtschaftliche Heizung und Überheizung des Kaminofens
zu verhindern (die Klappe der zentralen Luftzufuhr wird mit einer Steuerungseinheit mit Servomotor in
Abhängigkeit von der augenblicklichen Verbrennungsphase und Austrittstemperatur der Rauchgase gesteuert).
Hinweis: Kaminofen haben nicht den Charakter einer Dauerbrandheizung und sind für periodische
Betriebsunterbrechung bestimmt, vorwiegend wegen Entleerung des Aschekastens, die bei ausgekühlter Asche
vorzunehmen ist.
3. Sicherheitsvorschriften
Die Kaminöfen dürfen in normaler Umgebung gemäß ČSN 33 2000-3/1995 benutzt werden. Bei einer
Änderung dieser Umgebung, bei der auch vorübergehende Brand-, bzw. Explosionsgefahr entstehen könnte (z.
B. bei Verlegung von Linoleum, PVC, bei der Arbeit mit Anstrichmitteln, u. ä.) ist der Kaminofen rechtzeitig,
vor der Entstehung der Gefahr, außer Betrieb zu setzen. Der Kaminofen darf danach erst nach gründlicher
Lüftung des Raums, am besten mit Zugluft, wieder in Betrieb gesetzt werden.
Beim Betrieb ist die Zufuhr einer ausreichenden Verbrennungsluftmenge und Luft zum Lüften des Raums
sicherzustellen, vor allem bei parallelem Betrieb mit einer anderen Wärmeeinrichtung) (ca. 8 bis 15 m
3
für das
Verbrennen von 1 kg Brennstoff)! Bei gut abgedichteten Fenstern und Türen muss es nicht der Fall sein! Dieses
Problem wird mittels der aus einem getrennten Raum angeschlossenen CPV geregelt. Ebenfalls das Gitter der
Verbrennungs-, Lüftungs- und Heizluft darf nicht verstopft werden. Öffnen Sie die Tür beim Zulegen des
Brennstoffs stets langsam. Sie verhindern somit den Austritt von Rauch und Asche in den Raum. Der
Kaminofen erfordert zeitweilige Bedienung und Beaufsichtigung.
Für das Einheizen und Heizen dürfen keine brennbaren Flüssigkeiten benutzt werden! Es ist weiter verboten,
beliebige Kunststoffteile, Holzwerkstoffe mit chemischen Bindemitteln (Holzspanwerkstoffe, usw.) und
ebenfalls unsortierten Kommunalabfall mit Kunststoffresten u. ä. gemäß Gesetz 201/2012 zu verbrennen.
Achten Sie beim Heizen darauf, dass mit dem Kaminofen keine Kinder manipulieren. Der Kaminofen
darf nur von Erwachsenen bedient werden!
Bedienen Sie beim Betrieb alle Handgriffe und Knöpfe mit Hilfe einer Zange, eines Hakens bzw. mit der
behandschuhten Hand - Verbrennungsgefahr! Es ist verboten, auf den Kaminofen während des Betriebs und
solange er warm ist, beliebige brennbare Gegenstände abzulegen, die einen Brand verursachen könnten. Lassen
Sie bei dem Umgang mit dem Aschekasten und bei der Beseitigung heißer Asche erhöhte Vorsicht walten, es
besteht Verbrennungsgefahr. Heiße Asche darf nicht in Kontakt mit brennbaren Gegenständen kommen - z. B.
bei Schütten der Asche in Gefäße für den Kommunalabfall.
Bei saisonbedingter Benutzung und bei schlechten Zug- bzw. Witterungsbedingungen ist erhöhte
Aufmerksamkeit der Inbetriebnahme des Kaminofens zu widmen. Bei einer längeren Betriebsunterbrechung vor
erneutem Einheizen ist zu überprüfen, ob die Rauchwege nicht verstopft sind.
Beim Betrieb und Einbau des Kaminofens sind Sicherheitsvorschriften lt. ČSN 06 1008/1997
einzuhalten, vor allem:
3.1 Sicherheitsabstände:
3.1.1 Sicherheitsabstand eines Kaminofens im Raum von brennbaren Werkstoffen
Beim Einbau des Kaminofens im Raum mit brennbaren Gegenständen der Brennbarkeitsklasse B, C1 und C2
ist der Sicherheitsabstand gemäß ČSN 06 1008/1997 von der Kaminofentür 80 cm und in sonstigen
Richtungen 20 cm einzuhalten.
Beim Einbau des Kaminofens im Raum mit brennbaren Gegenständen der Klasse C3 sind diese Abstände zu
verdoppeln. Informationen über die Brennbarkeitsstufen bestimmter Baumateriale sind der ČSN 73 0823/1983
zu entnehmen. Ist es nicht möglich, den von der Norm vorgeschriebenen Sicherheitsabstand des Kaminofens
von brennbaren Stoffen einzuhalten, ist eine Schutzblende lt. 4.4.1 ČSN 06 1008/1997 zu verwenden.
Einstufung von Baustoffen nach der Brennbarkeitsstufe.
A unbrennbar Granit, Sandstein, Beton, Ziegelsteine, keramische Fliesen, spez. Putz
B schwierig brennbar Akumin, Heraklit, Lihnos, Itaver
C1 schwer brennbar Laubholz, Sperrholz, Sirkoklit, Hartpapier, Umakart
C2 mittelschwer brennbar Holzspanplatten, Solodur, Korkplatten, Gummi, Fußbodenbelag
C3 leicht brennbar Holzfaserplatten, Styropor, Polyurethan
Abb.1
3.1.2 Sichere Abstände der Rauchgasleitungen von brennbaren Werkstoffen und
Baukonstruktionen
Sicherer Abstand von Türzargenverkleidungen u. ä. angeordneten Baukonstruktionen aus brennbaren
Werkstoffen und von Rohrleitungsinstallationen, einschl. deren Dämmungen ist mind. 20 cm. Von sonstigen
Konstruktionsteilen aus brennbaren Werkstoffen mind. 40 cm (siehe Abb. 2) gemäß ČSN 06 1008/1997. Es
handelt sich um Baustoffe der Brennbarkeitsklasse B, C1 und C2 laut ČSN EN 13501-1/2010 (siehe Tabelle Nr.
1). Das gilt auch für Wände und hauptsächlich für Decken mit Putz auf brennbarem Untergrund, z. B. auf
Latten bzw. auf Schilf u. ä. Können diese Abstände nicht eingehalten werden, ist mit Hilfe von bautechnischen
Maßnahmen, unbrennbaren Verkleidungen, wärmebeständigen Dämmungen und Schutzblenden die
Brandgefahr vorzubeugen.
Wand
Kamieinsatz
3.2 Fußbodenschutz
Ist der Kaminofen nicht auf 100% unbrennbarem Fußboden eingebaut, ist er auf eine unbrennbare Unterlage
zu stellen, z. B. Blech (Dicke mind. 2 mm), Keramik, Hartglas, Stein, so dass die Temperatur des brennbaren
Fußbodens lt. ČSN 73 4230/2004 beim Betrieb nicht 50°C überschreitet.
Gemäß 5.1.3.3 ČSN 06 1008/1997 muss die Dämmungsunterlage den Feuerraum mind. um
- 30 cm in senkrechter Richtung zur Kaminofentür,
- 10 cm in paralleler Richtung zur Kaminofentür überstehen.
Auf den Kaminofen und in kleineren Abständen, als der Sicherheitsabstand dürfen keine Gegenstände aus
brennbaren Stoffen gestellt/gelegt werden.
3.3 Maßnahmen bei einem Feuer im Kamin (Schornstein):
Währen des laufenden Betriebs, vor allem bei der Benutzung von feuchtem Brennstoff setzen sich im Kamin
Ruß und Teer an. Bei Vernachlässigung der regelmäßigen Kontrolle und Reinigung des Kamins gemäß
Regierungsverordnung Nr. 91/2010 Slg. vom 1.3.2010, ersetzt die Verordnung Nr. 111/1981 Slg., erhöht
sich die Wahrscheinlichkeit eines Brands im Kamin.
Beim Entflammen von Ruß und Teer im Kamin ist wie folgt vorzugehen:
- auf keinen Fall mit Wasser löschen, das würde zur Bildung einer übermäßigen Menge von Dampf und zum
anschließenden Zerreißen des Kamins führen,
- falls es möglich ist, ist in die Feuerstätte trockener Sand zu schütten und somit das Feuer zu löschen,
- alle Verbrennungsluftzufuhrquellen löschen, falls es möglich ist, den Kamin zudecken, es darf jedoch die
Ansammlung von Raum im Haus nicht zur Folge haben,
- die lokale Feuerwehr informieren, um zu beurteilen, ob das Ereignis der Feuerwehrbereitschaft zu melden
ist,
- bis zum Ausbrennen des Kamins das Haus nicht verlassen, die Kamintemperatur und den
Verbrennungsverlauf ständig kontrollieren,
- nach dem Ausbrennen vor erneutem Einheizen mit dem Kaminfegerdienst Kontakt aufnehmen und den
Kaminzustand beurteilen lassen, mit dem Kaminofenhersteller Kontakt aufnehmen und den Kaminofen
untersuchen lassen.
4. Montagevorschriften
Hinweis: Bei der Montage des Kaminofens sind alle örtlichen Vorschriften einzuhalten, einschl.
Vorschriften, die nationale Normen und EU-Normen für diese Art von Verbrauchern betreffen, vor
allem:
ČSN 73 4230/2004 - Kamine mit offener und geschlossener Feuerstätte
ČSN EN 13229/2002+A1/2003+A2/2005 - Einbauheizverbraucher und Kamineinsätze für feste Brennstoffe
ČSN EN 13240/2002+A2/2005 - Verbraucher für feste Brennstoffe zum Beheizen von Wohnräumen.
ČSN 73 4201/2010 - Kamine und Rauchabzüge - Planung, Ausführung und Anschließung von
Brennstoffverbrauchern
ČSN EN 1443/2004 - Kamine - Allgemeine Anforderungen
ČSN EN 13501/2010 - Brandschutzklassifikation von Bauprodukten und Baukonstruktionen
ČSN 06 1008/1997 - Brandsicherheitseinrichtungen
4.1 Allgemein
Kaminöfen müssen auf Fußböden mit entsprechender Tragfähigkeit aufgestellt werden. Erfüllt der
vorhandene Zusammenbau nicht diese unerlässliche Bedingung, sind für die Erfüllung dieser Anforderung
geeignete Maßnahmen zu treffen (z. B. Benutzung einer Unterlage zur Verteilung der Belastung). Beim Einbau
ist angemessener Zugang für die Reinigung des Kaminofens, des Rauchabzugs und des Kamins (Schornsteins),
falls dieser nicht von einer anderen Stelle, z. B. vom Dach bzw. mit Hilfe einer zu diesem Zweck vorgesehenen
Tür gereinigt werden kann, vorzusehen.
4.2 Anschluss an den Kamin (Schornstein)
Vor der Montage eines geschlossenen Kaminofens ist anhand einer Berechnung nachzuweisen, dass die
Kaminkonstruktion mit ihrer Ausführung, Größe der Luftkanäle und wirksamen Höhe der Nennleistung des
einzubauenden Kaminofens entspricht.
Voraussetzung für die ordnungsmäßige Funktion des Kaminofens ist ein geeigneter Kamin (Schornstein) -
Mindestquerschnitt, Kaminzug, Dichtigkeit, u. ä. Holen Sie sich daher vor der Anordnung Ihres Kaminofens
einen Rat bei Ihrem Kaminfeger. Die erforderlichen Kaminwerte sind dem anliegenden technischen Datenblatt
zu entnehmen. Bei zu starkem Kaminzug ist es angebracht, eine geeignete Kaminklappe bzw. einen
Kaminzugregler einzubauen. Zu starker Kaminzug kann eine Ursache von Betriebsstörungen sein, z. B. der zu
intensiven Verbrennung, des zu hohen Brennstoffverbrauchs und kann eine dauerhafte Beschädigung des
Kaminofens zur Folge haben.
Die niedrigste wirksame Höhe des Kamins für den Rauchgasabzug vom Kaminofen ist 5 m (gemessen vom
Kaminanschluss bis zur Kaminmündung). Der Kaminanschluss ist mit einem Kaminring zu versehen. Der
Anschluss an den Rauchgaskanal ist mit dem Rauchgaskanalhersteller abzustimmen. Der Rauchgaskanal ist
mindestens 5 cm unter der Deckenuntersicht herauszuführen. Der Abzugsstutzen ist mit dem Kamin auf dem
kürzesten möglichen Weg zu verbinden, so dass die Rauchgasstrecke max. 1/4 der wirksamen Kaminhöhe
darstellt (d. h. 1,5 m). Die Abzugsrohre sind gegenseitig dicht mit Überlappung zu verbinden u. zw. in dem
Sinne, dass die Verbindungen jeweils der Rauchgasströmung entspricht bzw. mit Stumpfstoß mit Hilfe von
Verbindungsringen. Verläuft das Verbindungsstück durch Bauteile mit brennbaren Baustoffen, sind
Schutzmaßnahmen gemäß ČSN 06 1008/1997 zu treffen. Normgemäß soll die Rauchgasleitung in Richtung
des Rauchgaskanals in Richtung der Rauchgasströmung mind. unter dem Winkel steigen. Äußerst wichtig ist
die Dichtigkeit und Festigkeit der Verbindungsstellen. Der Kamin und der Kaminofenanschluss müssen der
ČSN 73 4201/2010 entsprechen. Der Kaminmantel darf bei der höchsten Kaminofentemperatur keine höhere
Temperatur, als 52°C aufweisen. Der Querschnitt der Rauchabzugskanäle darf nicht größer, als der Querschnitt
des Kaminluftkanals sein und darf sich nicht in Richtung der Kaminmündung verengen. Wird anhand einer
Berechnung nachgewiesen, dass der Querschnitt des Rauchabzugkanals und des Kamins kleiner sein kann, als
der Querschnitt des Rauchabzugstutzens des Kaminofens, ist der Querschnitt des Rauchabzugs unmittelbar
hinter dem Rauchabzugsstutzen des Kaminofens mit Hilfe eines kurzen Anlaufs bzw. eines Sprungs zu
reduzieren. Ein flexibler Rauchabzug aus dem Werkstoff gemäß Tab. A.1. darf nur an Stellen benutzt werden,
an denen dessen Kontrolle gemäß 7.2.1 der ČSN 73 4201/2002 gewährleistet werden kann, falls der
Rauchabzug nicht durch freien Raum geführt wird, ist dessen Kontrolle durch eine Anpassung gemäß 7.2.5
ČSN 73 4230/2002 sicherzustellen. Ein senkrechter Rauchabzug darf nur in den in 8.3.4 und 8.3.5 ČSN 73
4230/2002 angeführten Fällen benutzt werden.
Ein Kaminofen kann an einen gemeinsamen Luftkanal mit einem Gasverbraucher bei mehrschichtigen
Kaminen gemäß ČSN 73 4201/2002 angeschlossen werden.
5. Bedienungsanleitung
5.1 Brennstoff
In Kaminöfen darf nur Holz bzw. Holzbriketts in Übereinstimmung mit dem Gesetz 201/2012 verbrannt
werden. Zum Erreichen der Nennwerte des Kaminofens ist es empfehlenswert, trockene Holzscheite mit dem
Durchmesser 5-8 cm und in der Länge 20-30 cm und mit niedrigerer Feuchtigkeit, als 20% (optimal sind 10%)
bzw. Briketts aus gepresstem Holz zu benutzen. Reisig und klein gespaltenes Holz ist lediglich beim Anheizen
zu verwenden. Um das Holz richtig zu trocknen, sind die gespaltenen Holzscheite mindestens über 2 Jahre unter
einem gelüfteten Vordach zu lagern. Holzbriketts sind trocken zu lagern, andernfalls besteht die Gefahr, dass sie
zerfallen.
In dem Kaminofen ist bis zu der im technischen Datenblatt angeführten Nennleistung zu heizen, d. h.
Verbrennung der gegebenen Menge des erlaubten Brennholzes in 1 Stunde. Bei langzeitiger übermäßiger
Überlastung droht Beschädigung des Kaminofens.
Als Brennstoff dürfen nie brennbare Flüssigkeiten, Koks, Kohle bzw. Abfälle vom Typ:
Holzspanplatten, Kunststoff, Tüten, behandeltes Holz bzw. selbstständige Holzspäne, Sägemehl bzw.
Pellets benutzt werden!
!!! Verbrennung derartiger Werkstoffe verschmutzt nicht nur unsere Umwelt, sondern beschädigt
auch den Kaminofen und den Kamin!!!
5.2 Erste Inbetriebnahme des Kaminofens
Vor der ersten Inbetriebnahme sind etwaige Aufkleber vom Glas, Zubehörteile aus dem Aschekasten ggf.
Feuerraum zu beseitigen, dasselbe gilt auch für etwaige Transportsicherungen. Überprüfen Sie nach der
Abbildung aus dem technischen Datenblatt, ob die lose gelagerten Zugumlenkungsblenden, Schamottblöcke
ggf. die Sperren richtig angeordnet sind (es besteht die Möglichkeit, dass sie beim Transport bzw. bei der
Installation in die falsche Position gerutscht sind). Falls Sie deren fehlerhafte Anordnung feststellen, bringen Sie
die Bauteile in die richtige Position, andernfalls ist die richtige Funktion der Heizvorrichtung gefährdet. Nach
der Aufstellung des Kaminofens, Anschließung an den Kamin, ggf. Anschließung des Austauschers an das
Warmwassersystem und dessen Befüllung mit dem Wärmeträgermedium heizen Sie ein und heizen sie
mindestens eine Stunde "mit kleiner Flamme". Lassen Sie vor sowie im Laufe des ersten Einheizens die Tür des
Ofens sowie des Aschekastens ein wenig offen (ca. 1-2 cm), damit das Dichtungsmaterial nicht am Lack
anhaftet. Für die Oberflächenbehandlung des Kaminofens wurde feuerfeste Farbe benutzt, die nach dem ersten
Einheizen nach vorübergehendem Weicherden ausbrennt. Im Laufe der Phase des Weicherdens besteht erhöhte
Gefahr der Lackoberflächenbeschädigung mit der Hand bzw. einem Gegenstand. Beim ersten Einheizen ist der
Kaminofen mit kleiner Flamme, mit einer kleineren Brennstoffmenge und bei niedriger Temperatur zu beheizen.
Alle Materiale müssen sich an die Wärmebelastung gewöhnen. Durch vorsichtiges Anheizen verhindern Sie
Entstehung von Rissen in den Schamottblöcken, Beschädigung des Lacks und Deformation von Materialen der
Einsatzkonstruktion. Das Ausbrennen des Kaminofenlacks wird durch vorübergehenden üblen Geruch
begleitet, der mit der Zeit verschwindet.
Beim Ausbrennen des Lacks ist ordnungsmäßige Lüftung des Raums zu gewährleisten, ggf.
sicherzustellen, dass keine kleinen Haustiere ggf. Vögel im Raum anwesend sind, es ist auch
empfehlenswert, die Luftversorgung von Aquarien auszuschalten.
5.3 Einheizung und Heizung
1. Bei einem Kaminofen mit Rost - geben Sie in den Feuerraum zuerst zerknittertes Papier und schichten
Sie auf das Papier Holzsplitter. Zum Anheizen kann auch fester Feuerzünder benutzt werden. Lassen Sie nach
dem Einheizen das Feuer bei offenen Luftregulierungselementen frei aufbrennen. Es ist verboten, zum
Einheizen flüssige Brennstoffe (Benzin, Petroleum, u. ä.) zu benutzen! Sobald das Feuer aufbrennt und
genügend Zug vorhanden ist, können größere Holzscheite bzw. Holzbriketts zugelegt werden, ohne dass der
Rauch in den Raum austritt. Legen Sie stets die festgelegte Brennstoffmenge nach der Nennleistung des
Kaminofens zu.
2. Bei einem Kaminofen ohne Rost - wird zum Brennen lediglich die Sekundärluft genutzt, legen Sie daher
in den Feuerraum größere Holzscheite, anschließend kleinere Holzscheite und zuletzt Holzsplitter und Papier.
Lassen Sie nach dem Einheizen das Feuer bei offenen Luftregulierungselementen frei aufbrennen. Es ist
verboten, zum Einheizen flüssige Brennstoffe (Benzin, Petroleum, u. ä.) zu benutzen! Sobald das Feuer
aufbrennt und genügend Zug vorhanden ist, können größere Holzscheite bzw. Holzbriketts zugelegt werden,
ohne dass der Rauch in den Raum austritt. Legen Sie stets die festgelegte Brennstoffmenge nach der
Nennleistung des Kaminofens zu.
Der Brennstoffverbrauch ist stets im technischen Datenblatt angeführt. Regulieren Sie die
Verbrennungsintensität mit den Bedienungselementen der Luftzufuhr, ggf. durch Reduzierung des Kaminzugs,
falls in Ihrem Ofen eine Rauchklappe eingebaut ist. Eine größere Brennstoffmenge bzw. zu großer Zug und zu
große Luftzufuhr kann Überheizung und Beschädigung des Kaminofens zur Folge haben. Zu kleiner Zug
verursacht Schwärzung der Türscheibe bzw. Austritt von Rauch in den Raum bei der Öffnung der Ofentür und
beim Zulegen in den Kaminofen.
Hinweis: Die Feuerraumtür muss stets geschlossen sein, mit Ausnahme der Inbetriebnahme,
Brennstoffzulegung und Beseitigung der Asche. Bei jeder längeren Unterbrechung des Kaminofenbetriebs ist
vor dem Einheizen die Durchgängigkeit und Sauberkeit der Rauchzüge, des Kamins und des Feuerraums zu
kontrollieren. Das Erhitzen und Auskühlen des Kamineinsatzes wird durch Geräusche begleitet, es handelt sich
um keinen Mangel
5.4 Brennstoffzulegung
Zur Verhinderung des Austritts von Rauchgas in den Raum beim Zulegen empfehlen wir: Etwa 5 bis 10
Sekunden vor dem Öffnen der Feuerraumtür die Luftregler voll öffnen, anschließend die Tür zuerst ein wenig
öffnen, einige Sekunden warten, solange das Rauchgas nicht in den Kamin abgezogen wird und erst danach die
Tür voll öffnen. Nach dem Öffnen der Tür ist stets aufmerksam vorzugehen, es besteht Gefahr des Herausfallens
von heißer Asche. Nach dem Brennstoffzulegen die Feuerraumtür erneut schließen. Nach dem Aufbrennen des
Brennstoffs (ohne qualmige Flamme) den Regler wieder in die ursprüngliche Position stellen. Die Menge des
zugelegten Brennstoffs soll dem informativen Stundenverbrauch des jeweiligen Kaminofens entsprechen (siehe
technisches Datenblatt). Beim Überheizen kann die Ofenkonstruktion dauerhaft beschädigt werden.
Hinweis: Übermäßiger Austritt der Rauchgase in den Raum beim Zulegen kann durch Nachfüllung des
Brennstoffs nach dessen Abbrennen bis auf glühende Asche verhindert werden.
5.5 Betrieb im Lauf des Übergangszeitraum
Im Laufe des Übergangszeitraums ggf. bei höheren Außentemperaturen als 15°C, an regnerischen und
feuchten Tagen, bei starkem böigem Wind kann sich unter Umständen der Kaminzug (Abzug des Rauchgases
aus dem Kaminofen) verschlechtern. Es ist empfehlenswert, den Kaminofen in diesem Zeitraum mit der
kleinstmöglichen Brennstoffmenge zu betreiben, um durch Öffnung der Luftzufuhr die Verbrennung und somit
auch den Kaminzug verbessern zu können.
Tipp: In diesem Zeitraum kann sich durch Zugeigenschaften des Kamins in der Kaminmündung ein sog.
atmosphärischer Stöpsel bilden. Dieser Stöpsel kann das Eindringen von Rauch in den Raum beim Einheizen
verursachen. Es ist daher empfehlenswert, vor dem Einheizen zuerst ein Stück zerknittertes Papier - am besten
im oberen Feuerraumbereich verbrennen zu lassen. Dieser scheinbar geringe Rauch genügt zum "Durchstoßen"
des atmosphärischen Stöpsels. Anschließend kann man ohne Bedenken das Papier (bzw. den Feuerzünder)
anzünden, wobei auch ein feuchter Kamin entsprechend durchgängig ist.
In diesem Zeitraum kann beim Einheizen auch erfolgreich der Vorgang für den Kaminofen ohne Rost (ohne
Aschekasten) benutzt werden.
5.6 Beseitigung der Asche
Achten Sei darauf, dass Sie den Aschekasten entleeren, nachdem er bis in die Hälfte voll ist, damit der
Aschekegel nicht zu nah zu dem Rost anwächst und der Rost nicht durch Überhitzung beschädigt wird. Die
Asche würde zugleich die Zufuhr der erforderlichen Verbrennungsluft behindern. Der Aschekasten ist am
besten in kaltem Zustand zu entleeren, am besten bei der Vorbereitung der nächsten Einheizung. Für die
Reinigung des Aschekastens in kaltem Zustand ist ebenfalls ein Aschesauger mit Kleinpartikelfilter geeignet.
Holzasche kann für Kompost bzw. als Dünger benutzt werden. Die Asche ist in geschlossenen unbrennbaren
Behältern aufzubewahren.
Hinweis: Vor der Entleerung des Aschekastens ist zu überprüfen, ob er keine glühenden Aschereste enthält,
die Feuer im Abfallbehälter verursachen könnten.
Hinweis: Bei bestimmten Kaminofentypen befindet sich der Aschekasten im Raum unter dem Rost, ohne
dass er seitlich heraus genommen werden kann. Der Aschekasten ist nur bei ausgekühltem Ofen
herauszunehmen. Der Zugang zum Aschekasten ist nach dem Abklappen des Rosts frei.
Bei der Beseitigung von heißer Asche ist mit erhöhter Vorsicht vorzugehen.
5.7 Reinigung der Glasscheibe
Auf Erhaltung der Glasscheibensauberkeit hat außer der Benutzung des geeigneten Brennstoffs, der
ausreichenden Verbrennungsluftzufuhr und des entsprechenden Kaminzugs auch die Art, wie der Kaminofen
bedient wird, Einfluss. Wir empfehlen in diesem Zusammenhang nur eine Brennstoffschicht zuzulegen, so dass
der Brennstoff womöglich gleichmäßig im Feuerraum verteilt und weit vom Glas ist. Das gilt auch für Briketts
(Abstand zwischen einzelnen Briketts 5 bis 10 mm). Bei Verschmutzung des Glases beim Heizen empfehlen
wir, durch das Öffnen des Luftreglers die Verbrennungsintensität zu erhöhen, die Glasscheibe wird meistens
selbsttätig gereinigt.
Das verrußte Türglas kann in kühlem Zustand mit Zeitungspapier bzw. mit feuchtem Stoff mit Holzasche
ggf. mit einem speziellen Reinigungsmittel für Kaminöfen gereinigt werden. Verhindern Sie beim Reinigen des
Glases mit chemischen Mitteln deren Herunterlaufen auf die Dichtungsschnur zwischen dem Glas und dem
Türrahmen. Benutzen Sie für die Reinigung keine Scheuermittel!
6. Reinigung und Instandhaltung
Ihr Kaminofen ist ein Qualitätsprodukt und bei normalem Betrieb entstehen keine grundsätzlichen Störungen.
Wir empfehlen, den Kaminofen und die Rauchzüge vor sowie nach der Heizsaison gründlich zu überprüfen und
zu reinigen.
Nehmen Sie die Reinigung stets bei ausgekühltem Kaminofen vor!
6.1 Reinigung des Kaminofens / Ausbau der Schamottblöcke
Bei der Reinigung sind die Ablagerungen aus den Rauchzügen und aus dem Feuerraum zu beseitigen.
Herausgefallene Teile der Schamottausmauerung sind zu reparieren, am besten auszutauschen. Vollständigkeit
der Schamottausmauerung ist ebenfalls im Laufe der Heizsaison zu überwachen. Die Zwischenräume zwischen
einzelnen Schamottblöcken dienen zur Wärmedehnung und Verhinderung der Entstehung von Sprüngen in den
Blöcken und dürfen nicht z. B. durch Füllmasse ausgefüllt werden, wie es zum Beispiel bei älteren Heizgeräten
für feste Brennstoffe üblich war. Rissige Schamottblöcke verlieren nicht ihre Funktion, sofern sie nicht
ganz herausfallen! Wir empfehlen, bei der Kaminofenreinigung die losen Zugumlenkungsblenden
herauszunehmen, falls sie bei dem Kaminofen vorhanden sind (zur Erleichterung des Zugangs zu dem Raum
hinter den Blenden). Reinigung des Kaminofens (außer dem Glas) wird ohne Wasserzubereitungen
vorgenommen, z. B. mit Hilfe eines Staubsaugers bzw. von Stahlbürsten. Beliebige Modifizierungen des
Kaminofens sind unzulässig. Es sind ausschließlich vom Hersteller freigegebene Ersatzteile zu benutzen.
Ausbau der Schamottblöcke (siehe Schamottkammer). Schmieren Sie die Reibungsflächen der Tür und des
Schließmechanismus von Zeit zu Zeit mit kohlenstoffhaltigem Fett bzw. mit Schmierstoff für hohe
Temperaturen. Ist der Kaminofen außer Betrieb, schließen Sie ihn mit Hilfe der entsprechenden Schieber.
6.2 Reinigung des Warmwassertauschers
Die Luftkanäle des Austauschers sind nach Bedarf, mindestens 1x in 3 Wochen mit Hilfe der mitgelieferten
Bürste zu reinigen. Die Verschmutzungsstufe wird vor allem durch die Brennstofffeuchtigkeit, Bedienungsart
(z. Betrieb im Sparmodus - gesperrte Luftregler) und ebenfalls durch die Art der Anschließung an das
Heizsystem beeinflusst, siehe Kap. 4.3. Die Luftkanäle des Austauschers sind vom Bereich der
Verbrennungskammer zugänglich.
Sind bei dem Kaminofen Zugumlenkungsblenden vorhanden, sind diese zu entfernen..
6.3 Reinigung des Kamins
Jeder Benutzer eines Heizgeräts für feste Brennstoffe hat regelmäßige Kontrollen und Reinigung des Kamins
gemäß Regierungsverordnung Nr. 91/2010 vom 1.2.2010 (ersetzt die Verordnung Nr. 111/1981 Slg.)
sicherzustellen.
7. Entsorgung der Verpackung und des ausgesondertes Produkts
Wir empfehlen im Sinne des Gesetzes Nr. 125/1997 Slg. und der zusammenhängenden Vorschriften folgende
Art der Entsorgung der Verpackung und des unbrauchbaren, ausgesonderten Produkts.
Verpackung
a) Holzteile der Verpackung zum Heizen benutzen
b) die Kunststoffverpackung in einen Container für getrennten Abfall geben
c) Schrauben und Halter beim Altstoffhandel abliefern
d) die Tüte mit dem Luftfeuchtigkeitsseparator als getrennten Abfall entsorgen
Ausgesondertes Produkt:
a) das Glas ausbauen und in einen Container mit getrenntem Abfall geben
b) Dichtung und Schamottblöcke als Kommunalabfall entsorgen
c) Metallteile beim Altstoffhandel abliefern
8. Reparaturen und Reklamationen
Etwaige Service- und Garantiereparaturen werden direkt vom Produktionswerk bzw. mittels Ihres Händlers
sichergestellt. Bei einer Reklamation ist die Garantieurkunde, der Einkaufsbeleg des Kaminofens, das
Übergabeprotokoll vorzulegen, es ist Ihre genaue Adresse, Telefonnummer anzuführen und es ist der Mangel zu
beschreiben. Verlangen Sie beim Einkauf im eigenen Interesse vom Händler die lesbar ausgefüllte
Garantieurkunde und das Übergabeprotokoll. Von der Art und vom Ort der Reparatur wird nach Beurteilung des
Mangels von der Serviceabteilung beschlossen und die vorgeschlagenen Maßnahmen werden mit dem Inhaber
des Kaminofens abgestimmt. Für den Austausch des Kaminofens bzw. für die Aufhebung des Kaufvertrags
gelten entsprechende Bestimmungen des Bürgergesetzbuchs und der Reklamationsordnung.
GARANTIEURKUNDE
REKLAMATIONS- UND GARANTIEBEDINGUNGEN DER FIRMA ROMOTOP spol. s r.o.,
GÜLTIGE FÜR DEN KÄUFER (VERBRAUCHER)
1. Diese Reklamations- und Garantiebedingungen wurden gemäß entsprechenden Paragraphen des Bürgergesetzbuchs und des
Kundenschutzgesetzes erstellt.
2. Der Anbieter hat auf Antrag des Verbrauchers einen Beleg über den Einkauf des Produkts bzw. über die Leistung eines
Dienstes unter Anführung des Verkaufsdatums des Produkts bzw. Leistung des Dienstes, um was für ein Produkt bzw. eine
Dienstleistung es sich handelt und zu welchem Preis das Produkt bzw. die Dienstleistung gewährt wurden, zusammen mit
den Identifikationsangaben des Anbieters, mit dem Namen und Familiennamen bzw. der Bezeichnung bzw. der
Handelsfirma, ggf. Bezeichnung des Anbieters, seiner Identifikationsnummer, seinem Sitz bzw. seiner Geschäftsadresse,
auszustellen, falls durch eine andere Rechtsvorschrift nicht etwas anderes festgelegt. wird.
3. Auf das Produkt wird Garantie in der Dauer von 24 Monaten gewährt. Die Garantie beginnt bei der Abnahme der Sache
durch der Verbraucher zu laufen. Bei Bedarf der Inbetriebnahme durch eine autorisierte Firma ggf. Fachfirma beginnt die
Garantiefrist erst vom Tag der Inbetriebnahme der Sache zu laufen, falls der Käufer die Inbetriebnahme spätestens innerhalb
von drei Wochen nach Übernahme der Sache bestellt hat und rechtzeitig und ordnungsmäßig zur Leistung des Dienstes seine
erforderliche Mitwirkung geleistet hat.
4. Die Garantie bezieht sich auf sämtliche, nachweisbar im Laufe der gültigen Garantiezeit entstandenen Produktions- und
Materialmängel.
5. Die Garantie bezieht sich nicht auf den durch übliche Nutzung entstandenen Verschleiß und weiter:
- auf Mängel, entstandene durch fehlerhafte und unsachgemäße Bedienung und Eingriffe, Anschluss an einen ungenügend
ausgelegten Kamin bzw. Kamin mit ungenügendem Zug, durch unangemessenen Umgang ggf. unangemessene Benutzung
und Nichteinhaltung der Nutzungs- und Instandhaltungsbedingungen (siehe Bedienungsanleitung).
- auf Mängel, verursachte durch mechanische Beschädigung
- falls die Sache in feuchten und ungeschützten Räumen gelagert wird ggf. in Räumen benutzt wird, die dem
Wohnungsumfeld nicht entsprechen.
- auf Schäden, entstandene infolge einer Naturkatastrophe Witterungsbedingungen, gewaltsamer Beschädigung.
- bei Beschädigung der Garantieaufkleber und Fabriknummernschilder.
- Beschädigung der Ware beim Transport (im Falle des eigenen Transports). Im Falle des Transports mit einer externen
Spedition - ist vor Ort zu regeln.
- falls sich die Angaben der Garantieurkunde bzw. des Kaufbeleges von den Angaben am Typenschild unterscheiden.
6. Auf das bei einer Reparatur bzw. einem Austausch eines Ofenteils verwendete Verbrauchsmaterial bezieht sich Verlängerung
der Garantiezeit nicht.
7. Reklamationen sind bei demjenigen Anbieter geltend zu machen, bei dem die Sache gekauft wurde. Ist jedoch in der
Garantieurkunde ein anderes, für die Reparatur zuständiges Subjekt festgelegt, mit dem Sitz am Standort des Anbieters bzw.
in einem für den Käufer näheren Ort, ist der Käufer berechtigt, die Reparatur bei dem für die Ausführung der
Garantiereparatur festgelegten Subjekt vornehmen zu lassen. Das für die Reparatur festgelegte Subjekt hat die Reparatur in
der beim Verkauf der Sache zwischen dem Händler und Käufer vereinbarten Frist vorzunehmen.
8. De Anbieter hat dem Verbraucher eine schriftliche Bestätigung auszustellen, mit der Angabe, wann der Verbraucher das
Recht geltend gemacht hat, über den Inhalt der Reklamation und was für eine Art der Erledigung der Reklamation vom
Verbraucher angefordert wird, weiter eine schriftliche Bestätigung in der Frist von 30 Tagen über die Ausführung der
Reparatur und über das Datum und die Art der Erledigung der Reklamation, einschl. Bestätigung über die Ausführung der
Reparatur und deren Dauer, ggf. eine schriftliche Begründung der Ablehnung der Reklamation. Diese Pflicht bezieht sich
auch auf Personen, die mit der Ausführung der Reparatur betraut sind.
9. In den ersten 6 Monaten nach dem Einkauf wird die Reklamation als Verletzung des Kaufvertrags gemäß Bestimmung
t 616
des Handelsgesetzbuchs erledigt. In den folgenden Monaten wird gemäß
t 622 des Bürgergesetzbuchs verfahren, je nach
dem, ob es sich um einen behebbaren bzw. unbehebbaren Mangel handelt.
10. Reklamationen werden ausschließlich vom Käufer angenommen und mit ihm erledigt.
11. Bei der Übergabe der reklamierten Sache hat der Käufer Typenbezeichnung des Produkts und ausführliche Beschreibung des
Mangels (z. B. bei welcher Betriebsart und wie sich der Mangel bemerkbar macht, wie lange nach dem Einheizen,
Beschreibung der Handhabung der Sache vor Entstehung des Mangels u. ä.) mitzuteilen ggf. nachzuweisen.
12. Bei der Geltendmachung der Reklamation hat der Käufer nachzuweisen, dass das Produkt beim Anbieter reklamiert wird,
der das Produkt verkauft hat und dass die Reklamation innerhalb der Garantiezeit erhoben wird. Um diese Tatsachen
nachzuweisen, ist am besten vorzulegen:
- Verkaufsbeleg
- bestätigte Garantieurkunde
- bestätigtes Übergabeprotokoll
13. Sonstige, in diesen Reklamations- und Garantiebedingungen nicht geregelte Verfahren richten sich nach den einschlägigen
Bestimmungen des Bürgergesetzbuchs und des Verbraucherschutzgesetzes.
ÜBERGPABEPROTOKOLL
Auftraggeber: ...............................................................................................................
Verkaufsort: .................................................................................................................
.........................................................................................................
Hersteller (die für den Bau verantwortliche Person): ..............................................
.........................................................................................................
Verzeichnis der Urkundenbelege: ..............................................................................
.........................................................................................................
.........................................................................................................
Verzeichnis der Mängel und Nacharbeiten: ..............................................................
.........................................................................................................
Verzeichnis der Projektabweichungen (genehmigte Dokumentation): ..................
.........................................................................................................
.........................................................................................................
Baugenehmigung Aktz.: ..............................................................................................
Vom: ......................................... Herausgegeben von: .......................................
Technische Aufsicht des Bauherrn: ...........................................................................
Aufnahmedatum des Übergabeverfahrens: ..............................................................
Abschlussdatum des Übergabeverfahrens: ...............................................................
Datum der vollständigen Räumung der Arbeitsstelle: .............................................
Beginn der Garantiezeit ab: ........................................................................................
Erste Einheizung genehmigt am: ................................................................................
Der Abnehmer übernimmt mit seiner Unterschrift Sicherstellung des
Schutzes des übernommenen Baus vor der Beschädigung durch Dritte!!!
Hersteller (Unterschrift): .......................... den: ............... in .......................
Auftraggeber (Unterschrift): .................... den: ............... in .......................
FR Mode d’emploi général pour l’installation et l’entretien du
poêle de l’entreprise Romotop spol. s r.o.
- valable d’une façon générale pour tous les types de poêle fabriqués par l’entreprise Romotop spol. s r.o.
La fiche technique jointe comprend toutes les données techniques détaillées pour le type de poêle donné.
Le poêle ne peut être utilisé que conformément au présent mode d’emploi !
Aucune modification non autorisée ne peut être effectuée sur le poêle !
1. Introduction
2. Description technique
3. Consignes de sécurité
3.1 Distances de sécurité
3.1.1 Distance de sécurité entre le poêle et les matériaux inflammables
3.1.2 Distance de sécurité entre les conduits de fumée et les matériaux inflammables et les pièces de
construction
3.2 Protection du plancher
3.3 Mesures en cas d’incendie dans la cheminée
4. Règles de montage
4.1 Consignes générales
4.2 Raccordement à la cheminée
5. Guide d’entretien
5.1 Combustible
5.2 Première mise en service du poêle
5.3 Allumage et chauffage
5.4 Chargement de combustible
5.5 Utilisation pendant la période de transition
5.6 Récupération des cendres
5.7 Nettoyage de la vitre
6. Nettoyage et entretien
6.1 Nettoyage du poêle / démontage des chamottes
6.2 Nettoyage de la cheminée
7. Mode de liquidation des emballages et du produit hors d’usage
8. Réparations et réclamation
9. Certificat de garantie
10. Bordereau de remise
1. Introduction
Nous vous remercions d’avoir opté pour notre poêle et nous vous félicitons chaleureusement car vous venez
de devenir le propriétaire d’un poêle de qualité exceptionnelle de l’entreprise Romotop spol. s r.o. faisant partie
des meilleurs fabricants européens d’appareils de cheminée.
Notre poêle peut servir non seulement comme chauffage d’appoint renforçant l’atmosphère de votre foyer ou
de votre bâtiment récréatif, mais également comme source de chauffage principale avec un rendement thermique
élevé, un fonctionnement sans poussière et une combustion parfaite respectant au maximum l’environnement.
Tous les appareils de cheminée fabriqués par notre entreprise sont testés conformément aux normes ČSN EN
13 240/2002 ou ČSN EN 13 229/2002.
Dans votre propre intérêt, veuillez lire soigneusement le mode d’emploi et la fiche technique. Pour un
fonctionnement en toute sécurité, l’utilisateur est tenu de s’informer dûment sur l’installation et l’utilisation
correctes de ce dispositif. Veuillez conserver le mode d’emploi et la fiche technique de façon à ce que, au début
de chaque saison de chauffe, vous puissiez rafraîchir vos connaissances nécessaires à la bonne utilisation de
votre poêle.
Nous ne fournissons une garantie pour nos produits que si vous respectez les consignes indiquées dans le
présent mode d’emploi relatif à l’utilisation du poêle.
2. Description technique
Le poêle est destiné à être installé dans différents espaces intérieurs (appartements, bâtiments récréatifs,
restaurants). Le poêle Romotop est fabriqué à partir de matériaux de construction de qualité - fonte, acier
CORTEN et aciers de construction et à chaudière de qualité, les pièces soumises à une charge sont en acier de
type HARDOX. La surface des constructions en acier est protégée par un vernis mat réfractaire. Les vernis
réfractaires ne sont pas anticorrosifs. L’intérieur de la chambre à combustion du poêle tout en tôle est pavé de
plaques en chamotte qui ne sont liées entre elles par aucune matière graisseuse afin de prévenir leur
endommagement par les dilatations thermiques. La chambre à combustion peut être fermée solidement à l’aide
de la porte équipée d’un vitrage spécial thermorésistant. Non seulement la vitre augmente les sensations
esthétiques amenées par le spectacle des flammes dansantes, mais elle permet également la transmission de
l’agréable chaleur rayonnante. En outre, le vitrage empêche la projection d’étincelles venant du bois brûlant
ainsi que l’arrivée de fumée dans la pièce. Le fond du foyer comprend généralement une grille en fonte
amovible. Devant la grille, on place généralement une barrière pour empêcher que le combustible ne tombe ou
ne glisse sur la porte (vitre de devant) ou encore une bosse en tôle ou en céramique. Dans le cas des foyers à
grille, un espace pour le cendrier se trouve sous la grille. Pour certains types, la bouche du conduit de fumée
peut être ajustée en fonction des besoins à la sortie de fumée supérieure ou arrière. Le poêle est fabriqué avec
deux revêtements. L’espace entre les revêtements est utilisé pour réchauffer l’air. La partie supérieure du
revêtement extérieur est dotée de bouches d’évacuation de l’air réchauffé. Le revêtement extérieur peut être
orné de céramique ou de pierre enfin d’accentuer le design et d’améliorer les propriétés d’accumulation
thermique du poêle. Pour certains types de poêle, la construction à deux revêtements est adaptée pour le
réchauffement de l’eau chaude utile avec possibilité de raccord au système de chauffage standard. Ce poêle peut
être équipé d’une courbe de refroidissement empêchant la surchauffe en cas de panne de courant électrique.
Le poêle doté d’une arrivée d’air de combustion primaire et secondaire est équipé des éléments de commande
correspondants. L’air primaire est acheminé directement dans le combustible brûlant (généralement par le
cendrier et la grille) et sert à la réaction de combustion primaire. L’air secondaire soutient la combustion des gaz
combustibles résiduels dans les produits de combustion et augmente ainsi le rendement thermique du dispositif
chauffant tout en prenant part de façon significative à la réduction de la quantité des matières nocives rejetées
dans l’air ambiant. L’air secondaire est amené avant tout dans l’espace au-dessus du combustible brûlant. Sa
présence entraîne le laminage (primage) de l’air froid sur la paroi intérieure de la vitre frontale. En même temps,
ce processus empêche la vitre de noircir. En renfermant partiellement ou complètement l’air primaire, l’air
secondaire prend également part à la combustion primaire. Lors de l’allumage, quand le tirage de la cheminée
est encore faible, laissez l’air primaire complètement ouvert. Lorsque la cheminée commence à chauffer, vous
pouvez refermer partiellement voire complètement l’arrivée d’air primaire en fonction du rendement désiré du
poêle. Afin de réduire le rendement du poêle, vous pouvez également opter pour une dose de combustible
inférieure ou encore limiter le tirage de la cheminée en montant une trappe à fumée (fermeture manuelle dans le
conduit à fumée refermant le passage max. à 75 %). Nous recommandons cela notamment pour un tirage de
cheminée environ égal ou supérieur à 20Pa. La vanne secondaire est destiné à la fermeture complète du poêle
pour arrêter complètement son fonctionnement. Le foyer et le couvercle du cendrier doivent toujours être fermés
sauf au moment de la mise en marche, du chargement de combustible et du retrait des résidus solides de la
combustion afin d’empêcher que les produits de la combustion s’échappent dans la pièce.
Certains poêles à cheminée sont dotés d’un échangeur d’accumulation thermique ce qui permet d’augmenter
l’efficacité d’un tel poêle, permettant une utilisation maximale de l’énergie du combustible.
Certains poêles à cheminée sont fabriqués avec une arrivée d’air centrale (AAC). Cette dernière permet
d’amener, dans la chambre à combustion du poêle, de l’air pour la combustion à partir des espaces extérieurs,
des entrées, des salles techniques etc. Les poêles à cheminée avec AAC ne sont pas dépendants de la quantité
d’air se trouvant dans l’espace chauffé. Ainsi, ils contribuent non seulement à maintenir un climat agréable dans
votre demeure, mais réduisent également les frais d’énergie (l’air réchauffé déjà une fois dans la maison n’est
pas consommé).
Les poêles à cheminée avec AAC se prêtent tout particulièrement à une installation dans des maisons à faible
consommation d’énergie. Afin d’augmenter le confort, le système de chauffage de certains poêles à
cheminée avec AAC peut être équipé d’une régulation électronique de la combustion. Cette dernière
apporte en outre la possibilité de prolonger le processus de combustion ainsi que l’intervalle de chargement de
combustible, d’augmenter la sécurité du fonctionnement et de limiter le chauffage non-économique et la
surchauffe du poêle (la vanne de l’arrivée d’air centrale est contrôlée par l’unité de contrôle et le servomoteur en
fonction de la phase actuelle de combustion et de la température de sortie des produits de la combustion).
Avertissement : Le poêle n’a pas un caractère de dispositif chauffant permanent et il est conçu pour une
utilisation périodique interrompue, notamment en raison du vidage du cendrier qui est effectué lorsque les
cendres ont refroidi.
3. Consignes de sécurité
Le poêle peut être utilisé dans son environnement normal conforme à la norme ČSN 33 2000-3/1995. Dans le
cadre d’un changement d’environnement pouvant entraîner un danger transitionnel d’incendie ou d’explosion
(par exemple lors du collage de linoléum, PVC, pendant l’utilisation de produits de revêtement etc.), le poêle
doit être mis hors d’usage avant que le risque ne survienne. En outre, le poêle ne peut être utilisée qu’après une
aération soigneuse, si possible par courant d’air.
Lors de l’utilisation, il faut assurer qu’une quantité suffisante d’air de combustion et d’air pour l’aération de
la pièce soit acheminée, notamment lorsqu’on utilise en même temps un autre dispositif de chauffage (environ 8
à 15m
3
pour brûler 1 kg de combustible) ! Cela n’est pas forcément le cas si les fenêtres et les portes sont bien
étanches ! On obtient cela lorsqu’on branche l’AAC dans une pièce séparée. Par ailleurs, la grille de régulation
de l’air de combustion, d’aération et de chauffage ne doit pas être bouchée. Ouvrez toujours la porte pour le
chargement du combustible lentement. Ainsi, vous empêcherez la fumée et les cendres de s’échapper dans la
pièce. Le poêle demande de temps à autre à être entretenu et surveillé.
Aucun liquide inflammable ne doit être utilisé pour l’allumage et le chauffage ! En outre, il est interdit de
brûler des plastiques, des matériaux en bois avec divers agglomérats chimiques (agglomérés etc.), quels qu’ils
soient, ainsi que des déchets ménagers non triés issus des résidus de plastique et autres conformément à la loi
201/2012.
Pendant le chauffage, assurez-vous que le poêle n’est pas manipulé par des enfants. Le poêle ne peut
être utilisé que par des personnes adultes !
Pendant le fonctionnement, maniez tous les manches et les boutons à l’aide de pinces, de crochets, voire
votre main protégée par un gant (isolant) - risque de brûlure ! Pendant son utilisation et lorsqu’il est encore
chaud, il est interdit de déposer sur le poêle des objets en matériaux inflammables, quels qu’ils soient,
susceptibles de causer un incendie. Veuillez être très prudent en manipulant le cendrier et en retirant les cendres
brûlantes car vous risquez de vous brûler. Les cendres brûlantes ne doivent pas entrer en contact avec des objets
inflammables - par exemple pendant le versement dans les récipients destinés aux déchets communaux.
En cas d’utilisation saisonnière et en cas de mauvaises conditions de tirage ou climatiques, il est nécessaire
de porter une attention accrue lorsqu’on met le poêle en fonction. Après une longue période d’interruption de
fonctionnement, il est nécessaire de contrôler si les voies de combustion n’ont pas été bouchées avant de
rallumer le poêle.
Pendant l’utilisation et l’installation du poêle, il est nécessaire de respecter les consignes de sécurité
conformes à la norme ČSN 06 1008/1997, notamment :
3.1 Distances de sécurité :
3.1.1 Distance de sécurité entre le poêle et les matériaux inflammables
Pendant l’installation du poêle dans un espace contenant des objets inflammables de classe d’inflammabilité
B, C1 et C2, la distance de sécurité d’après la norme ČSN 06 1008/1997, à savoir 80cm de la porte et 20cm des
autres objets, doit être respectée.
Si le poêle est installé dans un espace contenant des objets inflammables de classe C3, ces distances doivent
être multipliées par deux. Les informations sur le degré d’inflammabilité de certains matériaux de construction
sont évoquées par la norme ČSN 73 0823/1983. S’il est impossible de respecter la distance de sécurité du
dispositif chauffant par rapport aux substances inflammables tel que prévu par la norme, il est nécessaire
d’utiliser une cloison de protection conformément à 4.4.1 ČSN 06 1008/1997.
Matériaux de construction classés par degré d’inflammabilité
A non inflammables granit, grès, bétons, briques, carreaux de céramique, plâtres spéciaux
B peu inflammable acuminé, fibrociment, lihnos, Itaver
C1 difficilement inflammables bois feuillu, contre-plaqué, formica, papier durci, Umakart
C2 inflammabilité moyenne aggloméré, solodur, liège, caoutchouc, revêtements
C3 inflammabilité facile planches de fibre de bois, polystyrène, polyuréthane
3.1.2 Distance de sécurité entre les conduits de fumée et les matériaux inflammables et les pièces de
construction
La distance de sécurité avec la garniture du cadre de porte et autres constructions placées de cette sorte en
matériaux inflammables d’une part et l’installation de tuyaux y compris les isolations est d’au moins 20cm. Les
autres parties des constructions en matériaux inflammables doivent être à une distance minimale de 40cm (voir
image 2) selon ČSN 06 1008/1997. Il s’agit des matériaux de construction de classe d’inflammabilité B, C1 et
C2 selon ČSN EN 13501-1/2010 (voir tableau n° 1). Ceci s’applique également aux murs et notamment aux
Obr.1
Distances minimales :
A > 80cm
B > 20cm
plafonds avec enduit sur fond inflammable, par exemple les voliges etc. ! Si ces distances ne peuvent être
respectées, il faut pallier le risque d’incendie à l’aide de mesures techniques de construction, de revêtements
ignifuges, d’isolations et de cloisons résistantes à la chaleur.
3.2 Protection du plancher
Si le poêle n’est pas installé sur un plancher non inflammable à 100 %, il est nécessaire de le placer sur un
tapis non inflammable isolant, par exemple sur de la tôle (épaisse d’au moins 2 mm), de la céramique, du verre
durci, de la pierre, de façon à ce que la température du plancher inflammable d’après ČSN 73 4230/2004
pendant le fonctionnement ne dépasse pas 50 °C.
D’après 5.1.3.3 ČSN 06 1008/1997, le tapis isolant doit dépasser le foyer d’au moins
- 30cm verticalement par rapport à la porte de chargement du poêle.
- 10cm horizontalement par rapport à la porte de chargement du poêle.
Aucun objet en matière inflammable ne doit être déposé sur le poêle ni à une distance inférieure à la distance
de sécurité.
3.3 Mesures en cas d’incendie dans la cheminée :
À la suite d’un fonctionnement courant, notamment à cause de combustible humide, des cendres et du
goudron sont déposés dans la cheminée. Lorsqu’on néglige les contrôles réguliers et le nettoyage de la cheminée
conformément au règlement du gouvernement n° 91/2010 du J.O. daté du 1
er
mars 2010 remplaçant l’avis
n° 111/1981 du J.O., la probabilité d’un incendie dans cette dernière augmente.
En cas d’ignition des cendres et du goudron dans la cheminée, procédez de la façon suivante :
- n’éteignez avec de l’eau dans aucun cas, cela provoquerait l’apparition d’une trop grande quantité de vapeur
ce qui mènerait à la déchirure de la cheminée
- si possible, versez du sable sec sur le foyer pour éteindre le feu
- fermez toutes les arrivées d’air pour la combustion, si possible recouvrez la cheminée, cependant, il ne faut
pas que la fumée s’amasse dans l’espace de la maison
- contactez l’équipe des sapeurs-pompiers locale afin d’évaluer la nécessité d’informer les services de
pompiers d’urgence
- ne quittez pas la maison jusqu’à ce que la cheminée s’éteigne, contrôlez la température de la cheminée et le
déroulement de la combustion au fur et à mesure
- après la fin de la combustion et avant de rallumer le poêle, veuillez contacter le service de ramonage afin
que celui-ci évalue l’état de la cheminée, ainsi que le fabricant du poêle pour un contrôle.
4. Règles de montage
Avertissement : Pendant le montage du poêle, toutes les règles locales doivent être respectées, y
compris les règles relatives aux normes nationales et européennes pour ce type d’appareils, notamment :
ČSN 73 4230/2004 - Cheminées avec foyer ouvert et fermé
ČSN EN 13229/2002+A1/2003+A2/2005 - Appareils de chauffage encastrables et inserts de cheminée pour
combustible solide
ČSN EN 13240/2002+A2/2005 - Appareils à combustible solide servant au chauffage des espaces
d’habitation
ČSN 73 4201/2010 - Cheminées et conduits de fumée - conception, réalisation et branchement des appareils
à combustion
ČSN EN 1443/2004 - Cheminées – Exigences générales
ČSN EN 13501/2010 - Classification des produits de construction et des constructions des bâtiments relative
aux incendies
ČSN 06 1008/1997 - Dispositifs de sécurité anti-incendie
4.1 Consignes générales
Le poêle doit être installé sur des planchers supportant la charge correspondante. Si l’installation existante ne
remplit pas cette condition essentielle, des mesures adéquates doivent être prises pour remplir cette exigence
(par exemple l’utilisation d’un tapis répartissant la charge). Lors de l’installation, il est nécessaire d’assurer un
accès adéquat pour le nettoyage du poêle, du conduit de fumée et de la cheminée s’il n’est pas possible de
nettoyer cette dernière à partir d’un autre endroit, par exemple le toit ou la petite porte destinée à cet effet.
4.2 Raccordement à la cheminée
Avant le montage du poêle fermé, il faut calculer si la construction de la cheminée correspondra par sa
réalisation, la dimension des conduits d’aération et la hauteur utile au rendement nominal du poêle installé.
La condition d’un bon fonctionnement du poêle est une cheminée adéquate (section minimale, tirage de la
cheminée, étanchéité etc.). Ainsi, avant de mettre en place le poêle, veuillez consulter un ramoneur qualifié.
Vous trouverez les valeurs pour la cheminée dans la fiche technique jointe. Dans les cas où le tirage de la
cheminée est trop élevé, il convient d’installer une trappe à cheminée adéquate ou un régulateur de tirage de la
cheminée. Un tirage trop élevé peut causer des problèmes pendant le fonctionnement, par exemple une
combustion trop intense, une consommation de combustible élevée, et peut également entraîner un
endommagement irréversible du poêle.
La hauteur utile la plus basse de la cheminée pour l’évacuation des produits de la combustion provenant du
poêle est de 5 m (mesuré à partir de la frette après la bouche de la cheminée). L’entrée dans la cheminée doit
être équipée d’une frette. Le raccordement au carneau doit être consulté avec le fabricant du carneau. Le carneau
doit déboucher au moins à 5 cm du plafond. Reliez la bouche de tirage avec la cheminée par le chemin le plus
court possible de manière à ce que la longueur des voies de fumée ne dépasse pas 1/4 de la hauteur utile de la
cheminée (à savoir 1,5m). Les tuyaux à fumée et le coude doivent être reliés étanchement en se chevauchant de
façon à ce que les joints soient assemblés en fonction du sens du courant des produits de la combustion, ou
encore assemblés bout à bout à l’aide d’anneaux de liaison. Si la pièce de liaison traverse des pièces de
construction avec des matériaux de construction inflammables, il est nécessaire de respecter les mesures de
protection d’après la norme ČSN 06 1008/1997. D’après celle-ci, le conduit de fumée doit s’élever en direction
du carneau dans le sens du courant des produits de la combustion sous un angle d’au moins . L’étanchéité et la
solidité des joints sont capitales. La cheminée et le raccordement du poêle doivent correspondre à ČSN 73
4201/2010. Lors de la température de fonctionnement la plus élevé de la cheminée, la chaleur du revêtement de
la cheminée ne doit pas dépasser 52 °C. La section des bouches d’aération du conduit de fumée ne doit pas être
supérieure à la section de l’aération de la cheminée et ne doit pas rétrécir en direction de la cheminée. Si les
calculs démontrent que la section de l’aération du conduit de cheminée et de la cheminée peut être inférieure à la
section de la bouche de combustion du poêle, la section du conduit de fumée diminuera juste après la bouche de
combustion du poêle par entrée courte ou par saut. Un conduit de fumée flexible, matériau d’après le tableau
A.1. peut être utilisé dans les endroits où on peut garantir son contrôle d’après la norme 7.2.1 ČSN 73
4201/2002, si le conduit de fumée ne passe pas par un espace dégagé, la possibilité de pouvoir le contrôler doit
être garantie par modification d’après 7.2.5 ČSN 73 4230/2002. Un conduit de fumée vertical ne peut être utilisé
que dans les cas indiqués dans 8.3.4 et 8.3.5 ČSN 73 4230/2002.
Le poêle peut être raccordé à une aération commune avec un appareil à gaz dans le cas de cheminées à
plusieurs couches d’après ČSN 73 4201/2002.
5. Guide d’entretien
5.1 Combustible
Dans le poêle, il est autorisé de brûler uniquement du bois ou des briquettes en bois conformément à la loi
201/2012. Afin d’atteindre les paramètres nominaux du dispositif chauffant, il est recommandé d’utiliser des
bûches sèches d’un diamètre de 5-8cm,, de longueur 20-30cm, d’une humidité inférieure à 20% (idéalement
10%
), ou encore des briquettes de bois comprimé. N’utilisez du petit bois ou du bois coupé finement
uniquement pour l’allumage. La siccité recommandée du bois est atteinte en entreposant les bûches pendant au
moins deux ans dans un abri aéré. Les briquettes en bois doivent être entreposées dans un environnement sec,
autrement elles risquent de s’effriter.
Il est nécessaire de chauffer le poêle au rendement nominal indiqué dans la fiche technique ce qui signifie la
combustion du combustible donné à la quantité autorisée en 1 heure. En cas de surcharge excessive pendant
longtemps, l’appareil de chauffage à cheminée risque d’être endommagé.
N’utilisez jamais des liquides inflammables, du coke, du charbon en tant que combustible, ni des
déchets des types suivants : plaques en aggloméré, matières plastiques, sacs en plastique, bois enduit ou
copeaux de bois séparés, sciure de bois ou pellets !
!!! Non seulement la combustion de tels matériaux est très nocive pour l’environnement et pour nous
tous, mais elle endommage également le poêle ainsi que la cheminée !!!
5.2 Première mise en service du poêle
Avant la première mise en service, il faut veiller à retirer les éventuels autocollants de la vitre, les pièces
d’accessoires du cendrier, voire les retirer du foyer, ce qui est valable également pour les éventuelles sécurités
utilisées pendant le transport. D’après l’image de la fiche technique, contrôlez si les cloisons librement insérées
destinées à diriger le tirage, les blocs de chamotte ou encore le dispositif de blocage sont correctement placés (il
est possible qu’ils se soient déplacés pendant le transport ou l’installation). Si vous constatez un défaut de
placement, rectifiez-le, sinon le fonctionnement correct de l’appareil de chauffage risque d’être empêché. Après
le placement du poêle, le raccord à la cheminée, voire le raccord de l’échangeur à la distribution d’eau chaude et
son remplissage par le médium chauffant, chauffez le poêle et laissez chauffer tranquillement pendant au moins
1 heure. Avant et pendant le premier chauffage, laissez la porte du poêle et du cendrier légèrement ouverte (env.
1-2mm) de façon à ce que le matériau d’étanchéité ne se lie pas avec le vernis. Le revêtement de surface du
poêle est formé par une couleur réfractaire qui se renforce pendant le premier chauffage, suite à une phase
intermédiaire de ramollissement. Pendant la phase de ramollissement, il existe un danger accru
d’endommagement de la surface du vernis par la main ou par un objet. Pendant le premier chauffage, le poêle
doit être « allumé » avec une petite flamme, en brûlant une petite quantité de combustible, à température plutôt
basse. Tous les matériaux doivent s’habituer à la charge thermique. En effectuant le premier chauffage avec
précaution, vous empêchez la création de déchirures dans les briques en chamotte, l’endommagement du vernis
et la déformation des matériaux de la construction de l’insert. Le durcissement du vernis du poêle est
accompagné d’une odeur temporaire disparaissant complètement au bout d’un moment.
C’est pour cela que pendant que la substance pulvérisée brûle, il est nécessaire d’assurer l’aération
correcte de la pièce, voire d’évacuer les petits animaux ou les oiseaux de l’espace comprenant les vapeurs
de vernis, il est également recommandé d’éteindre l’oxygénation des aquariums pendant ce temps.
5.3 Allumage et chauffage
1. Pour les poêles à cheminée avec grille - insérez tout d’abord du papier chiffonné dans l’espace du foyer
puis posez du petit bois dessus. Pour l’allumage, vous pouvez utiliser l’allume-feu fixe PE-PO. Après
l’allumage, laissez le feu brûler librement tout en gardant les éléments de régulation d’air ouverts. Il est interdit
d’utiliser des liquides inflammables (essence, pétrole, etc.) pour le chauffage ! Dès que le feu commence à
brûler et que le tirage est suffisant, vous pouvez ajouter des bûches plus grandes ou encore les briquettes en bois
sans avoir peur d’être enfumé. Chargez la quantité prescrite de combustible d’après le rendement nominal du
poêle.
2. Pour les poêles à cheminée sans grille - seul l’air secondaire est utilisé pour la combustion, ainsi, insérez
d’abord des bûches en bois dans l’espace du foyer, puis du petit bois et enfin des copeaux de bois et du papier.
Après l’allumage, laissez le feu brûler librement tout en gardant les éléments de régulation d’air ouverts. Il est
interdit d’utiliser des liquides inflammables (essence, pétrole, etc.) pour le chauffage ! Dès que le feu
commence à brûler et que le tirage est suffisant, vous pouvez ajouter des bûches plus grandes ou encore les
briquettes en bois sans avoir peur d’être enfumé. Chargez maximalement la quantité prescrite de combustible
d’après le rendement nominal du poêle.
La consommation de combustible est toujours indiquée dans la fiche technique. Vous pouvez régler
l’intensité de la combustion à l’aide des éléments de contrôle pour l’arrivée d’air, voire en limitant le tirage dans
la cheminée, si une trappe à fumée a été installée. Une trop grande quantité de combustible ou un tirage ou une
arrivée d’air importants peuvent mener à la surchauffe et à l’endommagement du poêle. Un tirage trop faible
entraîne le noircissement des vitres, voire l’échappement de la fumée dans la pièce lorsqu’on ouvre la porte et
que l’on charge le combustible dans le poêle.
Avertissement : La porte du foyer doit toujours être fermée sauf lors de la mise en service du poêle, lors du
chargement de combustible et lors du retrait des cendres. Après chaque interruption prolongée du
fonctionnement du poêle, il est nécessaire, avant de le rallumer, d’effectuer le contrôle de la non-obstruction et
de la propreté des circuits de fumée, de la cheminée et de l’espace de combustion. Généralement, le
réchauffement et le refroidissement de l’insert de cheminée s’accompagne d’effets acoustiques, cela ne constitue
pas un défaut.
5.4 Chargement de combustible
Afin d’empêcher l’échappement de gaz de fumée dans la pièce pendant le chargement de combustible, nous
recommandons : Environ 5 à 10 secondes avant l’ouverture de la porte du foyer, ouvrez complètement les
régulateurs d’air, puis ouvrez tout d’abord légèrement la porte du foyer, attendez quelques secondes que les
émanations de fumée soient aspirées dans la cheminée, et après seulement ouvrez la porte complètement. Après
l’ouverture de la porte de chargement, il faut surveiller la possible chute de tisons brûlants. Après le chargement
de combustible, refermez la porte du foyer. Lorsque le combustible commence à brûler (sans flamme fumeuse),
réglez à nouveau le régulateur dans sa position d’origine. La quantité de combustible chargé doit correspondre à
la consommation horaire indicative pour le poêle donné (cf. fiche technique). En cas de surchauffe, la
construction du poêle peut être endommagée de façon irréversible.
Avertissement : Un échappement trop important de produits de la combustion dans la pièce pendant le
chargement peut être évité en rajoutant le combustible après brûlement complet sur la base incandescente.
5.5 Utilisation pendant la période de transition
Pendant la période de transition, à savoir lorsque les températures extérieures dépassent 15 °C, pendant les
journées pluvieuses et humides, ou encore en cas de fortes rafales de vent, le tirage de la cheminée (aspiration
des produits de la combustion à partir du poêle) peut se détériorer en fonction des conditions. Pendant cette
période, il convient d’utiliser le poêle avec la plus petite quantité de combustible possible, afin qu’il soit
possible, en ouvrant les arrivées d’air, d’améliorer la combustion et par conséquent le tirage de la cheminée.
Astuce : Pendant cette période, à cause des propriétés du tirage de la cheminée, ce que l’on appelle « un
bouchon atmosphérique » peut survenir dans la bouche de la cheminée. Ce dernier peut causer l’infiltration de
fumée dans la pièce pendant l’allumage du combustible. C’est pour cela que nous recommandons, avant
l’allumage en tant que tel, de laisser tout d’abord brûler un morceau de papier chiffonné, si possible dans la
partie supérieure du foyer. Cette fumée qui semble pourtant minime suffit à percer le bouchon atmosphérique
créé. Ensuite, nous pouvons allumer le papier (ou PE-PO) sans crainte et le passage sera garanti même si la
cheminée est humide.
Pendant cette période, on peut également chauffer le combustible comme pour les poêles à cheminée sans
grille (sans cendrier).
5.6 Récupération des cendres
Veillez à ce que le cendrier soit vidé dès qu’il est rempli environ à moitié, de façon à ce que le tas de cendres
ne s’amoncelle pas trop près de la grille et que cette dernière ne s’abîme pas pour cause de surchauffe. En même
temps, les centres empêcheraient l’arrivée d’air nécessaire à la combustion. Le vidage du cendrier devrait être
effectué lorsque celui-ci est froid, idéalement lorsqu’on se prépare à rallumer le poêle. Afin de nettoyer le
cendrier ou encore les foyers sans cendrier lorsqu’ils sont refroidis, il est pratique d’utiliser un aspirateur destiné
à l’aspiration des cendres avec filtre pour les petites impuretés. Les cendres issues du bois brûlé peuvent être
utilisées pour le compost ou comme engrais. Conservez les cendres dans des récipients fermés non
inflammables.
Avertissement : Avant de vider le cendrier, vérifiez s’il ne comprend pas des restes de combustible brûlant
qui pourraient provoquer un incendie dans le récipient à déchets.
Avertissement : Pour certains types de poêles à cheminée, le cendrier est placé dans le bac sous la grille sans
possibilité d’extraction latérale. Le cendrier ne peut être extrait que lorsque le dispositif chauffant ne fonctionne
pas et lorsqu’il est refroidi. L’accès au cendrier est permis après soulèvement de la grille.
Soyez très prudent lorsque vous ôtez les cendres brûlantes !
5.7 Nettoyage de la vitre
Afin de conserver la propreté de la vitre, il faut veiller à utiliser un combustible adapté, permettre une arrivée
d’air de combustion suffisamment importante ainsi qu’un tirage de cheminée correspondant, mais il faut
également prendre en compte la façon dont le poêle est manipulé. Dans cet ordre d’idées, nous recommandons
de ne charger qu’une seule couche de combustible et ce de façon à ce que ce dernier soit réparti le plus
équitablement possible dans le foyer et à ce qu’il soit le plus loin possible de la vitre. Ceci est également valable
pour les briquettes (distance entre 5 et 10 mm). Si la vitre est salie pendant le processus de chauffage, nous
recommandons d’augmenter l’intensité de la combustion en ouvrant le régulateur d’air, ce qui entraîne
généralement le nettoyage automatique de la vitre.
Si la vitre de la porte est enfumée, on peut la nettoyer, lorsque celle-ci est refroidie, à l’aide de papier
journal ou d’un chiffon humide trempé dans des cendres de bois, voire à l’aide d’une solution nettoyante
spéciale conçue pour les poêles à cheminée. Lors du nettoyage de la vitre à l’aide de produits chimiques, veillez
à ce que ceux-ci ne coulent pas sur le fil d’étanchéité entre la vitre et le cadre de la porte. N’utilisez pas d’agents
nettoyants qui pourraient rayer la vitre !
6. Nettoyage et entretien
Votre poêle est un produit de qualité et dans le cadre d’une utilisation normale, aucune panne majeure ne
survient. Nous recommandons de contrôler et de nettoyer soigneusement le poêle ainsi que les voies de
combustion avant et après la saison.
N’effectuez le nettoyage du poêle que lorsque celui-ci est froid !
6.1 Nettoyage du poêle / démontage des chamottes
Pendant le nettoyage, il est nécessaire d’éliminer les résidus dans les conduits de fumée et dans l’espace de
combustion. Réparer, si possible en les échangeant, les parties du garnissage en chamotte qui sont tombées. Il
faut veiller à ce que le garnissage en chamotte soit complet même pendant la saison de chauffage. Les espaces
entre les différents raccords en chamotte servent de dilatation thermique afin d’empêcher que les raccords
n’éclatent et ces espaces ne doivent pas être remplis par quoi que ce soit, par exemple une substance pour
graisser comme c’était le cas pour les dispositifs chauffants à combustible solide plus anciens. Les raccords en
chamotte fissurés restent fonctionnels s’ils ne tombent pas complètement ! Pendant le nettoyage, nous
recommandons d’enlever du poêle les parois librement placées servant à diriger le tirage, si ces dernières sont
utilisées pour le poêle (ainsi, l’accès à l’espace situé au-dessus est facilité). Le nettoyage du poêle (en dehors de
la vitre) est effectué sans agents aqueux, par exemple par aspiration ou avec une brosse en acier. Toute
modification du poêle est inadmissible. N’utilisez que des pièces de rechange approuvées par le fabricant.
Démontage de la chamotte (cf. Âtre en chamotte). Les parties de frottement des suspensions de la porte et du
mécanisme de fermeture doivent être graissées de temps en temps avec de la graisse de charbon ou de la graisse
conçue pour des températures élevées. Fermez le poêle avec les vannes adaptées lorsqu’il est hors d’usage.
6.2 Nettoyage de la cheminée
Chaque utilisateur d’un dispositif de chauffage à combustible solide est tenu d’assurer des contrôles et un
nettoyage réguliers de la cheminée conformément au règlement du gouvernement n° 91/2010 du J.O. daté du
1.3.2010 remplaçant l’avis n°111/1981 du J.O.
7. Mode de liquidation des emballages et du produit hors d’usage
Dans le sens de la loi n° 125/1997 du J.O. et des règlements connexes, nous recommandons le procédé
suivant de liquidation de l’emballage ainsi que du produit prêt à être liquidé.
L’emballage :
a) utiliser les parties en bois de l’emballage pour chauffer
b) placer l’emballage en plastique dans un container pour déchets triés
c) déposer les vis et les manches dans les matériaux triés.
d) placer le sachet avec le séparateur d’humidité de l’air dans un récipient à déchets séparé
Le produit prêt à être liquidé :
a) démonter la vitre et la placer dans un container pour déchets triés
b) déposer les joints et les plaques en chamotte dans les déchets communaux
c) déposer les parties en métal dans les matériaux triés
8. Réparations et réclamation
Les réparations liées au service après-vente et à la garantie sont assurées directement par l’entreprise de
fabrication ou encore par l’intermédiaire du vendeur. Dans le cadre de la réclamation, il est nécessaire de
présenter le certificat de garantie, le justificatif d’achat du poêle, le bordereau de remise, ainsi que de fournir
votre adresse précise, votre numéro de téléphone et décrire le défaut. Dans votre propre intérêt, lors de l’achat,
demandez au vendeur un certificat de garantie et un bordereau de remise remplis de façon lisible. Après
évaluation du défaut, le mode et l’endroit de la réparation seront déterminés par le département de service après-
vente et les mesures proposées seront consultées avec le propriétaire du poêle. Pour échanger le poêle ou
annuler le contrat d’achat, les dispositions correspondantes du Code civil et du règlement des réclamations
s’appliquent.
CERTIFICAT DE GARANTIE
CONDITIONS DE RECLAMATION ET DE GARANTIE DE L’ENTREPRISE ROMOTOP spol.
s r.o. VALABLES POUR L’ACHETEUR (CONSOMMATEUR)
1. Les présentes conditions de réclamation et de garantie sont élaborées conformément aux articles correspondants du Code civil
et du Code de protection du consommateur.
2. À la demande du consommateur, le vendeur est tenu d’établir un justificatif d’achat du produit ou de prestation du service en
indiquant la date de vente du produit ou de la prestation du service, ainsi qu’en indiquant de quel produit ou de quel service il
s’agit et à quel prix le produit a été vendu ou le service a été fourni, de même que les données d’identification du vendeur
comportant son nom et son prénom ou la raison sociale ou le nom de l’entreprise, voire le nom du vendeur, son numéro
d’identification, son siège ou son lieu d’exercice, sauf mention contraire dans la législation spéciale.
3. Le produit fait l’objet d’une garantie de 24 mois. La garantie commence le jour de la remise du produit au consommateur. En
cas de besoin d’une mise en service par une entreprise autorisée, voire spécialisée, la période de garantie est entamée
seulement à compter du jour de la mise en service du produit, si l’acheteur a commandé la mise en service au plus tard dans
un délai de trois semaines à compter de la remise du produit et qu’il a fait preuve dûment et à temps de la synergie nécessaire
à la mise en service.
4. La garantie s’applique à tous les défauts de construction et les défauts matériels apparus sans équivoque au cours de la
période de garantie valide.
5. La garantie ne s’applique pas à l’usure du produit causée par son utilisation normale ni aux défauts suivants :
- les défauts dus à une utilisation et des interventions inappropriées et non professionnelles, au raccordement à une cheminée
aux dimensions insuffisantes ou une cheminée avec un tirage trop faible, à une manipulation ou une utilisation excessives et
au non respect des conditions d’utilisation et d’entretien (voir Guide d’entretien).
- défauts causés par endommagement mécanique
- si le produit est entreposé dans des espaces humides et non couverts, voire est utilisé dans des espaces qui ne correspondent
pas à des espaces d’habitation.
- les dommages causés par des catastrophes naturelles, les conditions climatiques, un endommagement violent.
- en cas d’endommagement des étiquettes et des plaquettes de garantie avec les numéros de fabrication.
- en cas d’endommagement du produit pendant le transport (lorsque l’acheteur assure le transport). En cas de transport par le
biais d’un service d’expédition externe - doit être réglé par contrôle sur place.
- si les données figurant sur le certificat de garantie ou le justificatif d’achat diffèrent des données sur la plaquette de
fabrication.
6. La prolongation de la période de garantie ne s’applique pas au matériel de consommation utilisé dans le cadre de la réparation
ou de l’échange des pièces du poêle.
7. Le client fait valoir sa réclamation auprès du vendeur lui ayant vendu le produit. Cependant, si un autre entrepreneur figure
sur le certificat de garantie en ce qui concerne la réparation et que celui-ci se trouve à l’endroit du vendeur ou dans un endroit
plus proche pour l’acheteur, l’acheteur fait valoir le droit de faire réparer son produit auprès de l’entrepreneur désigné pour la
réalisation de la réparation dans le cadre de la garantie. L’entrepreneur désigné pour la réparation est tenu d’effectuer la
réparation dans les délais convenus entre le vendeur et l’acheteur lors de la vente du produit.
8. Le vendeur est tenu de dresser, pour le consommateur, un certificat écrit précisant la date à laquelle le consommateur a fait
valoir son droit, le contenu de la réclamation et le mode de règlement de la réclamation demandée par le consommateur ; en
outre, il doit fournir un certificat écrit dans un délai de 30 jours concernant la réalisation de la réparation en précisant la date
et le mode de règlement de la réclamation, y compris le justificatif de réalisation de la réparation et la durée de la réparation,
voire le cas échéant une justification écrite du refus de la réclamation. Cette obligation concerne également les autres
personnes désignées dans le cadre de la réalisation de la réparation.
9. Au courant des premiers six mois à compter de l’achat, la réclamation sera réglée en tant que contradiction avec le contrat
d’achat conformément à la disposition
t 616 du Code civil. Dans les mois suivant la période de garantie, il sera procédé
conformément à la disposition
t 622 du Code civil en fonction du fait s’il s’agit d’un défaut réparable ou non réparable.
10. Les réclamations sont réceptionnées et traitées uniquement avec l’acheteur.
11. Lors de la transmission du produit pour la réclamation, l’acheteur est tenu de renseigner, voire de prouver la désignation du
type du produit ainsi que la description détaillée du défaut (par exemple dans quel mode et de quelle manière le défaut se
manifeste, combien de temps après l’allumage, la description de la manipulation avec le produit avant l’apparition du défaut,
etc.).
12. Lorsque l’acheteur fait valoir la réclamation, l’acheteur est tenu de prouver que le produit réclamé a été acheté auprès du
vendeur ayant vendu le produit et que la période de garantie est en cours. Pour prouver ces faits, il convient de présenter :
- le justificatif de vente
- le certificat de garantie validé
- le bordereau de remise validé
13. Les autres procédés non régis par les présentes conditions de réclamation et de garantie sont régis par les dispositions
correspondantes du Code civil et du Code de protection du consommateur.
BORDEREAU DE REMISE
Auteur de la commande : ............................................................................................
Adresse de réalisation : ................................................................................................
.........................................................................................................
Réalisateur (personne responsable de la construction) : ..........................................
.........................................................................................................
Liste des justificatifs sur papier : ...............................................................................
.........................................................................................................
.........................................................................................................
Liste des défauts et des manquements : .....................................................................
.........................................................................................................
Liste des écarts par rapport au projet (documentation approuvée) : .....................
.........................................................................................................
.........................................................................................................
Permis de construction n° réf. : ..................................................................................
Date : ........................................ Émis : ...............................................................
Surveillance technique de l’investisseur : ..................................................................
Date de commencement de la procédure de transmission : .....................................
Date d’achèvement de la procédure de transmission : .............................................
Date de la libération totale du chantier : ...................................................................
La période de garantie commence le : ........................................................................
Le premier allumage et autorisé le : ...........................................................................
Par sa signature, l’acheteur accepte d’assurer la sécurité du produit remis
avant son endommagement par des tiers !!!
Réalisateur (signature) : ............................ le : .................. à ........................
Auteur de la commande (signature) : ....... le : .................. à ........................
IT Manuale generale per l'installazione e l’uso dei termocamini della
ditta Romotop spol. s r.o.
- valido in generale per tutti i tipi di termocamini prodotti dalla ditta Romotop spol. s r.o.
Nella scheda tecnica allegata sono riportati i dati tecnici dettagliati del singolo tipo di termocamino.
I termocamini possono essere utilizzati esclusivamente in conformità con il presente manuale!
Non è consentito realizzare modifiche non autorizzate dei termocamini!
1. Introduzione
2. Descrizione tecnica
3. Norme di sicurezza
3.1 Distanze di sicurezza
3.1.1 Distanze di sicurezza tra il termocamino ed eventuali materiali infiammabili
3.1.2 Distanza di sicurezza tra condotto di evacuazione dei fumi e materiali infiammabili o strutture edilizie
3.2 Protezione della pavimentazione
3.3 Misure in caso di incendio nel camino
4. Istruzioni per l’assemblaggio
4.1 In generale
4.2 Collegamento al camino
5. Manuale d’uso
5.1 Combustibile
5.2 Prima messa in funzione del termocamino
5.3 Accensione del fuoco e riscaldamento
5.4 Aggiunta del combustibile
5.5 Impiego nel corso dei periodi di transizione
5.6 Estrazione della cenere
5.7 Pulizia del vetro
6. Pulizia e manutenzione
6.1 Pulizia del termocamino / smontaggio chamotte
6.2 Pulizia del camino
7. Modalità di smaltimento della confezione e del prodotto dismesso
8. Riparazioni e reclami
9. Certificato di garanzia
10. Protocollo di vendita
1. Introduzione
Grazie per aver acquistato uno dei nostri termocamini. Le porgiamo al tempo stesso le nostre congratulazioni
poiché Lei è divenuto/a proprietario/a di un termocamino di altissimo livello realizzato dalla ditta Romotop spol.
s r.o., uno dei maggiori produttori europei di termocamini.
I nostri termocamini possono servire non soltanto come riscaldamento complementare volto a rafforzare
l’atmosfera della vostra casa o altro locale, ma anche come fonte di riscaldamento principale con elevata
prestazione termica, utilizzo privo di polvere e combustione perfetta, con il massimo rispetto per l’ambiente.
Tutti i termocamini prodotti dalla nostra ditta sono testati secondo la norma ČSN EN 13 240/2002 o ČSN EN
13 229/2002.
Il manuale e la scheda tecnica vanno studiati attentamente nel proprio interesse. Ai fini di un utilizzo sicuro
l’utente ha l’obbligo di informarsi regolarmente circa la corretta integrazione e funzionamento del presente
dispositivo. Il manuale e la scheda tecnica vanno ben conservati in modo tale da essere riletti all’inizio di
ciascuna stagione invernale per assicurare il regolare funzionamento del vostro termocamino.
La garanzia per i nostri prodotti è assicurata soltanto nel caso in cui siano ben rispettate le istruzioni
contenute nel presente manuale d’uso del termocamino.
2. Descrizione tecnica
Il termocamino è progettato per l'installazione in ambienti interni (appartamenti, edifici di comune utilità,
ristoranti). I termocamini Romotop sono prodotti in materiale di qualità – materiale edilizio, ghise, acciaio
COR-TEN ed altri tipi di acciaio di alta qualità per fini edilizi e per caldaia. I pezzi sottoposti a stress sono in
acciaio HARDOX. La superficie delle parti in acciaio è protetta da una vernice opaca resistente al calore. Le
vernici resistenti al calore non sono anticorrosive. La camera di combustione dei termocamini interamente in
lamiera è riempita con lastre in chamotte estraibili che – al fine di evitare loro possibili danneggiamenti causati
dalla dilatazione termica – non sono unite da nessun materiale di riempimento. La camera di combustione è
chiudibile in maniera ben stabile grazie a uno speciale sportello in vetro resistente al calore. Il vetro non soltanto
aumenta il valore estetico del focolare, ma consente anche un piacevole effetto creato dal passaggio del calore
per irradiazione. La vetrata impedisce allo stesso tempo la caduta di scintille dal legno che brucia e la fuoriuscita
di fumi nel locale. Il fondo della fornace è generalmente costituito da una griglia estraibile in ghisa. Davanti alla
griglia è di solito collocata una barriera che impedisce la caduta e lo spostamento di combustibile verso lo
sportello (vetrata anteriore) oppure un elemento in lamiera o ceramica. Nelle fornaci con griglia al di sotto della
griglia stessa si trova un apposito spazio per il cassetto della cenere. In alcuni tipi è possibile impostare il
bocchettone del condotto fumi sia per la canna superiore che posteriore. I termocamini sono realizzati con
versione a doppio strato di copertura. Lo spazio tra gli strati di copertura è impiegato per il riscaldamento
dell’aria. Lo strato interno è munito nella sua parte superiore di sfiati per l’aria riscaldata. Lo strato esterno può
essere caratterizzato da ceramica o pietra per mettere in risalto il design e per migliorare le proprietà di
accumulo di calore dei termocamini. In alcuni tipi di termocamini la struttura a doppio strato di copertura è
adattata al riscaldamento TUV con la possibilità di collegamento ad impianti di riscaldamento standard. Questi
termocamini possono essere dotati di un sistema di raffreddamento a loop contro il surriscaldamento in caso di
black-out di corrente.
I termocamini dotati di immissione separata di aria di combustione primaria e secondaria sono muniti di
appositi elementi di comando. L’aria primaria è immessa direttamente nel combustibile che arde (solitamente
attraverso il cassetto della cenere e la griglia); quest’aria serve per la reazione di combustione primaria. L’aria
secondaria sostiene la combustione dei gas infiammabili residui nei fumi, in modo da aumentare la potenza
termica del dispositivo, con inoltre un contributo significativo alla riduzione della quantità di sostanze inquinanti
che si sprigionano nell’atmosfera. L’aria secondaria affluisce principalmente nello spazio al di sopra del
combustibile che arde. Grazie alla presenza dell’aria secondaria si verifica il fenomeno del cosiddetto
“rotolamento” (trascinamento) dell’aria fredda lungo la parte interna del vetro frontale. Questo processo
impedisce anche l’annerimento del vetro. Allorché l’aria primaria è socchiusa o completamente chiusa, l’aria
secondaria partecipa anche alla combustione primaria. L’aria primaria non va lasciata completamente aperta
durante la fase di riscaldamento, quando il tiraggio del camino è ancora basso. Una volta riscaldato il camino è
possibile socchiudere l’immissione dell’aria primaria fino a chiuderla completamente (in base alla prestazione
richiesta dalla stufa). Per ridurre la potenza del termocamino è possibile limitare anche la dose di combustibile
oppure il tiraggio del camino mediante l'installazione di valvole di tiraggio (rubinetto d'arresto manuale nel
condotto fumi che chiude il passaggio dell'aria fino a un massimo del 75%). Questo accorgimento è consigliato
soprattutto in caso di tiraggio del camino intorno o al di sopra di 20Pa. L’arresto secondario serve per chiudere
completamente la stufa quando non è utilizzata. Il focolare e il coperchio del cassetto della cenere devono essere
sempre chiusi, tranne che nelle fasi di messa in servizio, riempimento del combustibile ed eliminazione dei
residui solidi della combustione (al fine di evitare lo sprigionarsi di fumi nell'ambiente).
Alcuni termocamini sono dotati di uno scambiatore ad accumulo termico, un dispositivo volto ad
incrementare l'efficienza della stufa e quindi a sfruttare al massimo l'energia del combustibile.
Alcuni termocamini sono realizzati già con afflusso centralizzato di aria (ACA). Ciò permette che l’aria
destinata alla combustione affluisca nella camera di combustione dall’esterno, dall’anticamera, dai locali tecnici,
ecc. I termocamini con ACA non sono dipendenti dalla quantità di aria nell’ambiente riscaldato. Contribuiscono
pertanto al mantenimento di un clima gradevole nella vostra casa e riducono anche le spese energetiche (in casa
non si consuma l’aria già una volta riscaldata).
I termocamini con CPV sono assolutamente indicati per l’installazione in case a basso consumo energetico.
Per aumentare il confort è possibile aggiungere la regolazione elettronica della combustione al sistema di
riscaldamento di alcune stufe con ACA. Questo sistema permette inoltre di prolungare il processo di
combustione e la frequenza delle ricariche di legna, aumentando la sicurezza dell’impiego e limitando le perdite
economiche nella fase di riscaldamento e surriscaldamento della stufa (la valvola dell’afflusso centralizzato
dell'aria è comandata da un'unità di comando e da un servomotore a seconda delle date fasi di combustione e
temperatura di uscita dei fumi).
Avvertimento: I termocamini non sono delle stufe ad irradiazione continua e prevedono interruzioni
periodiche dell'impiego, specie a causa dello svuotamento del cassetto della cenere (che va effettuato solo a
ceneri fredde).
3. Norme di sicurezza
I termocamini possono essere utilizzati in ambienti normali ai sensi della norma ČSN 33 2000-3/1995. In
caso di modifica all’ambiente con possibilità di incendi anche temporanei o di esplosioni (per esempio in caso di
applicazione di linoleum, PVC, durante lavori in cui si utilizzano materiali di rivestimento ecc.) è necessario
provvedere puntualmente a mettere fuori servizio il termocamino prima ancora che si possano creare condizioni
di pericolo. Il termocamino può essere impiegato soltanto dopo aver ben aerato l’ambiente (il modo migliore è
creando correnti d'aria).
Durante l'impiego è necessario assicurare l'afflusso di una quantità sufficiente di aria di combustione nonché
di aria destinata all'aerazione dell'ambiente, soprattutto quando il termocamino è impiegato simultaneamente ad
altri dispositivi termici (da 8 a 15m
3
circa per bruciare 1 kg di combustibile)! Se le porte e le finestre sono ben
chiuse senza perdite d'aria, le suddette condizioni non vengono comunque ad essere così indispensabili! Questo
problema è risolto dal sistema ACA, collegato ad un locale separato. Allo stesso tempo bisogna stare attenti a
non far intasare la griglia di regolazione dell'aria di combustione, aerazione e riscaldamento. Quando si effettua
la ricarica di combustibile lo sportello va aperto sempre delicatamente. In questo modo si eviterà la fuoriuscita
di fumo e cenere nell’ambiente. I termocamini richiedono interventi e monitoraggio occasionali.
Per l’accensione e per la fase di riscaldamento non è consentito utilizzare liquidi infiammabili! Si fa inoltre
divieto di bruciare qualsiasi tipo di materiale plastico, legna ricoperta o intrisa di leganti chimici (compensato,
ecc.) o rifiuti domestici non separati contenenti residui plastici ecc. (ai sensi della legge 201/2012).
Durante la fase di riscaldamento fare attenzione a non lasciare che i bambini manipolino o siano troppo vicini
al termocamino. Le operazioni sui termocamini possono essere eseguite solo da una persona adulta!
Mentre il termocamino è in funzione tutte le varie manopole e pulsanti vanno manipolati attraverso tenaglie,
gancetti o guantone termoresistente (presina) – v’è infatti pericolo di ustione! Durante il funzionamento e per
tutto il tempo in cui il termocamino è ancora caldo è vietato appoggiare sul termocamino eventuali oggetti in
materiale infiammabile che potrebbero causare incendi. È necessario essere particolarmente attenti durante la
fase di manipolazione del cassetto della cenere ed eliminazione della cenere calda, dato che si rischia di
rimanere ustionati. La cenere calda non può essere a contatto con oggetti infiammabili - per esempio non va mai
scaricata in contenitori di rifiuti urbani.
Nell’utilizzo stagionale e in caso di cattivo tiraggio o condizioni climatiche avverse, è necessario dedicare
particolare attenzione alla fase di messa in servizio del termocamino. Dopo il periodo di interruzione, prima di
riaccendere, è necessario controllare che non si siano intasate le vie dei fumi.
Nella fase di utilizzo ed installazione dei termocamini è necessario rispettare le norme di sicurezza
secondo ČSN 06 1008/1997, soprattutto:
3.1 Distanze di sicurezza:
3.1.1 Distanze di sicurezza tra il termocamino ed eventuali materiali infiammabili
In fase di installazione del termocamino in ambienti con presenza di oggetti infiammabili appartenenti alla
classe di infiammabilità B, C1 a C2 è necessario rispettare la distanza di sicurezza prevista nella norma ČSN 06
1008/1997 (dallo sportello 80cm e nelle altre direzioni 20cm).
Nel caso in cui il termocamino sia installata in ambienti con presenza di oggetti infiammabili appartenenti
alla classe C3 è necessario raddoppiare le suddetta distanze. Per informazioni sul livello di infiammabilità di
alcuni materiali edili si rimanda alla norma 73 0823/1983. Qualora non fosse possibile rispettare la distanza di
sicurezza tra la stufa e le sostanze infiammabili come previsto dalla norma, è necessario utilizzare una barriera
di protezione come da 4.4.1 ČSN 06 1008/1997.
Classificazione dei livelli di infiammabilità dei materiali edili
A non infiammabili granito, gres, cementi, mattoni, piastrelle in ceramica, intonaci spec.
B molto difficilmente infiammabili akumin, heraklit, lihnos, itaver
C1 difficilmente infiammabili legno di latifoglie, compensato, sirkoklit, formica carta, umakart
C2 moderatamente infiammabili pannelli di particelle, solodur, lastre in sughero, gomma, materiali da
pavimentazione
C3 altamente infiammabili tavole in fibra di vetro, polistirolo, poliuretano
Fig. 1
3.1.2 Distanza di sicurezza tra condotto di evacuazione dei fumi e materiali infiammabili o strutture
edilizie
La distanza di sicurezza minima tra il rivestimento degli stipiti delle porte o altre strutture architettoniche con
simili funzioni in materiale infiammabile e l’installazione del condotto (compreso isolamento) è pari a 20cm. La
distanza minima dagli altri componenti strutturali in materiale infiammabile è pari a 40cm (vedi fig. 2) ai sensi
Distanze minime:
A > 80cm
B > 20cm
della norma ČSN 06 1008/1997. Trattasi di materiale edile di classe di infiammabilità B, C1 e C2 ai sensi della
norma ČSN EN 13501-1/2010 (vedi tabella n.1). Questa regola vale anche per le pareti e soprattutto per i
soffitti con intonaco con base infiammabile - per esempio assi, pannelli ecc.! Qualora non fosse possibile
rispettare le suddette distanze, è necessario comunque prevenire il pericolo d'incendio ricorrendo ad apposite
misure tecnico-strutturali, rivestimenti non infiammabili, isolamenti e barriere resistenti al calore.
3.2 Protezione della pavimentazione
Se il termocamino non è installato su una superficie che non sia al 100% non-infiammabile, è necessario
collocarla su una base isolante non-infiammabile, per esempio in lamiera (spessore min. 2 mm), ceramica, vetro,
pietra, in modo che la temperatura della superficie infiammabile (ai sensi della norma ČSN 73 4230/2004) non
superi i 50°C durante il funzionamento.
In base a 5.1.3.3 ČSN 06 1008/1997 la base isolante deve superare in dimensioni il focolare di almeno
- 30cm in direzione perpendicolare allo sportello del termocamino.
- 10cm in direzione parallela allo sportello del termocamino.
È vietato collocare oggetti in materiale infiammabile sul termocamino o a distanza inferiore alla distanza di
sicurezza dal termocamino.
3.3 Misure in caso di incendio nel camino:
Con il normale funzionamento (e soprattutto se si utilizza combustibile umido) si creano dei depositi di
fuliggine e catrame nel camino. Se si trascurano i controlli regolari e la pulizia del camino (come da decreto
governativo n. 91/2010 Racc. del 1.3.2010 che sostituisce il decreto n. 111/1981 Racc.) aumenteranno i rischi
di incendio.
Nel caso in cui la fuliggine e il catrame nel camino prendano fuoco, procedere come segue:
- non estinguere mai con acqua poiché si formerebbe una gran quantità di vapore con conseguente rottura del
camino
- se possibile, si consiglia di cospargere sabbia asciutta nel focolare e quindi estinguere il fuoco
- chiudere tutte le entrate di aria per la combustione; se possibile coprire il camino, senza che però il fumo di
ritorno si accumuli nell'ambiente domestico
- contattare il corpo dei vigili del fuoco locale per valutare se è necessario o meno chiamare il pronto
intervento dei pompieri
- finché le fiamme nel camino non si sono estinte, non lasciate la casa, ma controllare continuamente la
temperatura del camino e il comportamento del fuoco che brucia
- una volta cessato l'incidente, prima di riaccendere il caminetto, contattare il servizio spazzacamini per
valutare lo stato del camino nonché il produttore del termocamino per un'ispezione allo stesso.
4. Istruzioni per l’assemblaggio
Avvertimento: Durante l’assemblaggio del termocamino è necessario rispettare tutte le prescrizioni
locali, comprese quelle relative alle norme nazionali ed europee per questo tipo di dispositivi, e in
particolare:
ČSN 73 4230/2004 – Caminetti con apertura/chiusura del focolare
ČSN EN 13229/2002+A1/2003+A2/2005 – Dispositivi integrati per il riscaldamento e inserti camino a
combustibile solido
ČSN EN 13240/2002+A2/2005 – Dispositivi a combustibile solido per il riscaldamento di ambienti abitati
ČSN 73 4201/2010 – Camini e canne fumarie – Progettazione, esercizio e collegamento dei dispositivi a
combustibile
ČSN EN 1443/2004 - Camini – Requisiti generali
ČSN EN 13501/2010 – Classificazione antincendio dei prodotti per l’edilizia e delle strutture dei fabbricati
ČSN 06 1008/1997 – Dispositivi di sicurezza antincendio
4.1 In generale
I termocamini devono essere installati su superfici aventi capacità di carico adeguata. Se le condizioni
strutturali non soddisfano questa condizione indispensabile, è necessario prendere opportune misure per
rispettare tale requisito (per esempio utilizzo di una base di distribuzione del carico). In fase di installazione è
necessario assicurare un adeguato spazio di accesso per la pulizia del termocamino, del condotto fumi e del
camino, a meno che non sia possibile effettuare la pulizia da un’altra zona (per esempio dal tetto oppure da
apposito sportello).
4.2 Collegamento al camino
Prima di assemblare il termocamino chiuso è necessario eseguire opportuni calcoli volti ad assicurare che la
struttura del camino (per la sua fattura, dimensioni degli sfiati e altezza utile) sia conforme alla potenza
nominale del termocamino.
Un presupposto essenziale per il corretto funzionamento del termocamino è un buon camino (sezione
minima, tiraggio del camino, guarnizioni, ecc.). Pertanto è necessario consultare il servizio spazzacamino prima
ancora di installare il termocamino. I valori relativi al camino sono riportati nella scheda tecnica allegata. Se il
tiraggio del camino è troppo alto, è opportuno installare un’adeguata valvola o un regolatore di tiraggio del
camino. Un tiraggio troppo elevato può causare problemi durante il funzionamento, per esempio combustione
troppo intensa ed elevato consumo di combustibile, con possibili conseguenti danni permanenti al termocamino.
L’altezza utile minima del camino per lo scarico dei fumi dal termocamino è 5m (con misurazione dall’anello
fino all’uscita del camino). L’ingresso del camino deve essere munito di apposito anello di rinforzo. Per il
collegamento alla canna fumaria consultare il produttore della canna fumaria. La canna fumaria deve essere fatta
passare ad almeno 5cm al di sotto del soffitto. Il bocchettone di scarico va collegato al camino secondo il
percorso più corto possibile, in modo che la lunghezza delle vie dei fumi sia pari a massimo 1/4 dell’altezza
utile del camino (ovvero 1,5m). I tubi del condotto fumi e il tubo a gomito vanno collegati in maniera ben
serrata tra di loro (con sovrapposizione), in maniera tale che i giunti siano sempre posizionati in conformità con
il flusso dei fumi – o altrimenti con collegamento testa a testa mediante anelli di giunzione. Se il pezzo di
giunzione passa attraverso elementi edilizi realizzati in materiale infiammabile è necessario adottare misure di
protezione ai sensi della norma ČSN 06 1008/1997. Secondo la norma il condotto fumi deve salire in direzione
della canna fumaria seguendo il flusso dei fumi, con un angolatura minima di . Fattori molto importanti sono
il serraggio e la robustezza dei giunti. Il camino e il collegamento della stufa devono essere conformi alla norma
ČSN 73 4201/2010. Il rivestimento del camino (alla più alta temperatura di esercizio del caminetto) non può
avere una temperatura superiore a 52°C. La sezione degli sfiati del condotto fumi non può essere superiore alla
sezione dello sfiato del camino e non può neanche restringersi in direzione del camino. Se dai calcoli risulta che
la sezione dello sfiato del condotto fumi e del camino può essere inferiore alla sezione del bocchettone di
scarico fumi del termocamino, si ridurrà la sezione del condotto fumi immediatamente dietro al bocchettone
fumi del termocamino (con una leggera inclinazione o scarto). Il condotto fumi flessibile in mat. come da tab.
A.1. può essere utilizzato soltanto in locali dove è possibile assicurare un controllo come da 7.2.1 ČSN 73
4201/2002; se il condotto fumi non passa attraverso spazi liberi, è necessario garantire il relativo controllo ai
sensi di 7.2.5 ČSN 73 4230/2002. I condotti fumi verticali possono essere utilizzati soltanto nei casi riportati in
8.3.4 e 8.3.5 ČSN 73 4230/2002.
Il termocamino può essere collegato ad uno sfiato comune con eventuali apparecchi a gas in camini a più strati
secondo la norma ČSN 73 4201/2002.
5. Manuale d’uso
5.1 Combustibile
Nei termocamini è possibile bruciare soltanto legna o bricchetti in legno che siano conformi alla legge
201/2012. Ai fini del raggiungimento dei parametri nominali della stufa si consiglia di utilizzare legna secca di
diametro 5-8cm, lunghezza 20-30cm e umidità inferiore al 20% (valore ottimale 10%) oppure bricchetti di
legno pressato. Eventuali scaglie e pezzetti minuti di legno possono essere impiegati solo in fase di accensione.
Il grado di secchezza consigliato per il legno viene raggiunto immagazzinando la legna per almeno due anni in
un ambiente coperto e ventilato. I bricchetti in legno vanno immagazzinati in ambienti asciutti per evitare il
rischio di degradazione.
Utilizzando i termocamini come fonte di riscaldamento è necessario rispettare la potenza nominale riportata
nella scheda tecnica, ovvero combustione della data quantità di combustibile nell'arco di 1 ora. In caso di
sovraccarico eccessivo e di lunga durata si rischia di danneggiare il termocamino.
Come combustibile non utilizzare mai liquidi infiammabili, coke, carbone o rifiuti come: pannelli in
compensato, materiale plastico, sacchetti, legna bagnata oppure solo trucioli di legno segatura o pellet!
!!! La combustione di questi materiali non solo inquina l’ambiente arrecando danni a noi tutti, ma
rovina anche la stufa e il camino !!!
5.2 Prima messa in funzione del termocamino
Precedentemente alla prima messa in funzione è necessario eliminare eventuali etichette dal vetro ed
eventuali accessori nel cassetto della cenere o nel focolare, compresi ovviamente elementi di fissaggio per il
trasporto. Seguendo la figura nella scheda tecnica verificare che i pannellini per il direzionamento del tiraggio, i
mattoni in chamotte e la sbarra siano ben posizionati (è possibile infatti che durante il trasporto o in fase di
installazione si siano spostati e non siano più nella posizione corretta). Se si riscontra un determinato difetto di
posizione, provvedere a correggerlo; altrimenti sarà messo a repentaglio il corretto funzionamento della stufa.
Una volta installata la stufa ed effettuato il collegamento al camino (eventualmente anche il collegamento dello
scambiatore alle condutture dell’acqua calda e il suo riempimento con vettore termico) procedere con
l’accensione e far bruciare lentamente per almeno un'ora. Prima e durante la prima accensione lasciare lo
sportello della stufa e il cassetto della cenere leggermente aperti (circa 1-2mm) per evitare che il materiale
isolante non si attacchi alla vernice. Per il trattamento di superficie del termocamino è impiegata vernice a prova
di calore che alla prima accensione (dopo un temporaneo ammorbidimento) finisce per indurirsi. Durante la
fase di ammorbidimento attenzione all’aumentato rischio di danni alla superficie verniciata se vi si appoggiano
le mani o altri oggetti. Durante la fase della prima accensione il termocamino deve “bruciare” con piccole
fiamme, con quantità minori di combustibile e a temperature più basse del solito. Tutti i materiali devono
abituarsi al carico termico. Se questa fase è eseguita con la dovuta cautela si impedirà la comparsa di
screpolature nei mattoni in chamotte, danni alla vernice e deformazioni dei materiali di costruzione dell'inserto.
La fase di indurimento della vernice del termocamino è caratterizzata da un cattivo odore temporaneo, che dopo
un po’ scomparirà del tutto.
Pertanto durante questa fase è necessario assicurare una buona aerazione del locale ed eventualmente
evitare la presenza di animali domestici di piccola taglia o uccelli nei locali contaminati dai vapori della
vernice; durante questa fase si consiglia anche di spegnere il dispositivo di rigenerazione dell’aria degli
acquari.
5.3 Accensione del fuoco e riscaldamento
1. Nei termocamini con griglianell’alloggiamento del focolare collocare dapprima la carta e su di essa i
pezzetti di legno. Per accendere il fuoco si possono utilizzare prodotti accendifuoco tipo diavolina. Una volta
acceso il fuoco lasciar bruciare ricordandosi di tenere aperti gli elementi di regolazione dell’aria. Si fa divieto di
utilizzare sostanze infiammabili liquide per accendere il fuoco (benzina, petrolio ecc.)! Non appena il fuoco
comincia ad ardere bene e il tiraggio è sufficiente, si possono inserire i pezzi di legno più grandi oppure i
bricchetti senza temere di far troppo fumo. Inserire la quantità stabilita di combustibile a seconda della potenza
nominale del termocamino.
2. Nei termocamini senza griglia – per la combustione si utilizza soltanto l’aria secondaria; pertanto
bisogna dapprima inserire la legna nel focolare, poi i legnetti piccoli e infine i ceppi e la carta. Una volta acceso
il fuoco lasciar bruciare ricordandosi di tenere aperti gli elementi di regolazione dell’aria. Si fa divieto di
utilizzare sostanze infiammabili liquide per accendere il fuoco (benzina, petrolio ecc.)! Non appena il fuoco
comincia ad ardere bene e il tiraggio è sufficiente, si possono inserire i pezzi di legno più grandi oppure i
bricchetti senza temere di far troppo fumo. Inserire la quantità stabilita di combustibile a seconda della potenza
nominale del termocamino.
Il consumo di combustibile è sempre indicato nella scheda tecnica. L’intensità della combustione va regolata
mediante gli appositi elementi di comando dell'immissione d'aria o eventualmente limitando il tiraggio nel
camino, se v'è una valvola fumi installata. Un'ingente quantità di combustibile o un forte tiraggio e immissione
d'aria può causare surriscaldamento e danni al termocamino. Un tiraggio troppo basso causa l’annerimento del
vetro e l’eventuale fuoriuscita di fumo nel locale quando si va ad aprire lo sportello per reinserire legna nel
termocamino.
Avvertimento: Lo sportello del focolare deve essere sempre chiuso, fatta eccezione per la fase di messa in
funzione, ricarica del combustibile ed eliminazione delle ceneri. Dopo l'interruzione dell'uso, prima di ripetere
l’accensione è necessario controllare la viabilità e la pulizia del condotto fumi, camino e luogo di combustione.
In generale il riscaldamento e il raffreddamento dell’inserto camino è accompagnato da un effetto acustico che
non è assolutamente da considerare un difetto
5.4 Aggiunta del combustibile
Al fine di evitare la fuoriuscita dei gas dei fumi nel locale durante la fase di ricarica della legna, si consiglia:
circa 5-10 secondi prima di aprire lo sportello del focolare aprire completamente i regolatori d’aria, quindi aprire
di poco lo sportello con molta cautela, attendere alcuni secondi affinché i fumi vengano aspirati nel camino e
infine aprire completamente lo sportello. Dopo aver aperto lo sportello è sempre necessario prestare molta
attenzione poiché possono cadere tizzoni ardenti. Dopo l’inserimento del combustibile richiudere lo sportello
del focolare. Una volta che il fuoco arde bene (senza fiamma che fa fumo), riposizionare il regolatore nella
posizione originaria. La quantità di combustibile inserito deve corrispondere al consumo orario indicativo per il
dato termocamino (vedi scheda tecnica). In caso di surriscaldamento si possono registrare danni permanenti alla
struttura della stufa.
Avvertimento: Per evitare l’eccessiva fuoriuscita di gas nel locale durante la fase di ricarica della legna
riaggiungere combustibile dopo la sua totale combustione sulla brace ancora ardente.
5.5 Impiego nel corso dei periodi di transizione
Durante i periodi di transizione (ovvero a temperature esterne superiori a 15°C, in giornate di pioggia e
umide, con forti ventilate) si possono verificare problemi con il tiraggio del camino (estrazione dei fumi dal
termocamino). Durante questo periodo è opportuno far funzionare il termocamino con la quantità più esigua
possibile di combustibile, in modo tale che – aprendo l’immissione d'aria – sia possibile migliorare la
combustione e quindi anche il tiraggio del camino.
Consiglio: Durante questi periodi, per effetto delle caratteristiche del tiraggio del camino, si può creare un
intasamento atmosferico a livello della bocca del camino. Questo fenomeno può provocare fumo nel locale al
momento dell’accensione del combustibile. Si consiglia pertanto - prima di accendere il fuoco - di lasciar prima
ardere completamente un po' di carta, preferibilmente nella parte alta del focolare. Il fumo che ne fuoriesce, pur
apparentemente trascurabile, è comunque sufficiente per perforare e quindi eliminare l’intasamento atmosferico.
Quindi si può tranquillamente accendere la carta (o la diavolina) poiché ora è garantito il giusto passaggio d'aria
anche con camino umido.
Durante questi periodi è anche possibile riscaldare come nei termocamini senza griglia (senza cassetto della
cenere).
5.6 Estrazione della cenere
Il cassetto della cenere deve essere svuotato già quando è metà pieno, in modo che il monte di cenere non si
avvicini troppo alla griglia provocando danni a causa del surriscaldamento. Allo stesso tempo la cenere
ostacolerebbe l’afflusso d’aria necessaria per la combustione. Il cassetto della cenere va svuotato quando è
freddo, preferibilmente durante la fase di preparazione di un'altra accensione. Per la pulizia del cassetto della
cenere o del focolare senza cassetto della cenere – sempre a freddo – si può benissimo utilizzare un
aspirapolvere idoneo per l’aspirazione di cenere con filtro per impurità fini. La cenere prodotta dalla legna
bruciata può essere compostata oppure usata come fertilizzante. La cenere va collocata in contenitori chiusi di
materiale non infiammabile.
Avvertimento: Prima di svuotare il cassetto della cenere verificare che non vi siano residui di carburante
ardenti che potrebbero incendiare il contenitore dei rifiuti.
Avvertimento: Per alcuni tipi di termocamini il cassetto della cenere è collocato in un carter sotto la griglia e
non è possibile estrarlo lateralmente. In questo caso il cassetto può essere estratto solo quando la stufa è spenta e
fredda. Per accedere al cassetto della cenere bisogna alzare la griglia.
Prestare particolare attenzione alla fase di rimozione della cenere calda!
5.7 Pulizia del vetro
I fattori importanti per mantenere pulito il vetro sono combustibile adeguato, afflusso sufficiente di aria di
combustione, buon tiraggio del camino e infine la modalità di utilizzo e funzionamento del termocamino. A
riguardo consigliamo di applicare solo uno strato di combustibile in modo che la legna sia posizionata nel
focolare nella maniera più omogenea possibile e in modo che essa sia il più lontano possibile dal vetro. Lo
stesso principio vale anche per i bricchetti (distanza tra loro da 5 a 10 mm). Nel caso in cui il vetro si sporchi
durante il riscaldamento consigliamo di aumentare l'intensità della combustione aprendo il regolatore dell'aria;
in questa maniera gran parte del vetro si pulirà da sola.
Se il vetro è appannato e sporco per via del fumo, lo si può pulire (a freddo) con fogli di giornale o panno
umido intriso nella cenere del legno, o eventualmente con un prodotto specifico per termocamini. Pulendo i vetri
con prodotti chimici evitare il loro contatto con la guarnizione di tenuta inserita tra il vetro ed il telaio della
porta. Non impiegare prodotti che potrebbero graffiare il vetro!
6. Pulizia e manutenzione
I termocamini sono un prodotto di qualità e in condizioni di normale impiego non si verifica nessun danno
rilevante. Consigliamo di controllare con attenzione e pulire i termocamini e i condotti dei fumi prima e dopo la
stagione invernale.
La pulizia va sempre effettuata a termocamino freddo!
6.1 Pulizia del termocamino / smontaggio chamotte
In fase di pulizia è necessario rimuovere i residui rimasti nel condotto fumi e nel vano della combustione. Le
parti rovinate o non correttamente sistemate del rivestimento in chamotte vanno riparate, preferibilmente
sostituite. La completezza del rivestimento in chamotte va monitorata anche durante la stagione di utilizzo della
stufa. Gli spazi tra i singoli mattoni in chamotte rispondono a criteri di dilatazione termica al fine di impedire la
formazione di cricche nei mattoni; pertanto questi spazi non possono essere assolutamente colmati per esempio
con materiale di riempimento (come si era soliti fare nelle vecchie stufe a combustibile solido). I mattoni in
chamotte che presentano screpolature non perdono la propria funzione, purché non siano completamente
sgretolati! In fase di pulizia consigliamo di estrarre dal termocamino le barriere di direzionamento del tiraggio –
se presenti. In questo modo si accede più facilmente allo spazio al di sopra di esse. La pulizia del termocamino
(eccetto il vetro) si effettua senza preparati a base di acqua, per esempio mediante aspirazione oppure con
spazzole d'acciaio. Non è consentito nessun tipo di modifica al termocamino. Utilizzare solo pezzi di ricambio
approvati dal produttore. Smontaggio degli chamotte (vedi Camera chamotte). Le superfici di attrito delle
cerniere dello sportello e del meccanismo di chiusura vanno di tanto in tanto lubrificate con grasso al carbonio o
altro lubrificante per alte temperature. Chiudere il termocamino con i rispettivi arresti, se fuori servizio.
6.2 Pulizia del camino
Ciascun utente di stufe a combustibile solido ha l'obbligo di controllare regolarmente e pulire il camino ai
sensi del decreto governativo n. 91/2010 Racc. del 1.3.2010 che sostituisce il decreto n. 111/1981 Racc.
7. Modalità di smaltimento della confezione e del prodotto dismesso
Ai sensi della legge n. 125/1997 Racc. e normative collegate, si consiglia la seguente modalità di
smaltimento della confezione e del prodotto dismesso che ormai non è più utilizzabile.
Confezione:
a) le parti in legno della confezione vanno bruciate come combustibile per il riscaldamento
b) la confezione in plastica va gettata in un contenitore per la raccolta differenziata
c) le viti e i supporti vanno consegnati al deposito rottami
d) il sacchetto con separatore dell’umidità dell’aria va gettato nel rispetto della raccolta differenziata
Prodotto dismesso non più utilizzabile:
a) smontare il vetro e gettarlo in un contenitore per la raccolta differenziata
b) le guarnizioni e i pannelli in chamotte vanno gettati tra i rifiuti solidi urbani
c) le parti metalliche vanno consegnate al deposito rottami
8. Riparazioni e reclami
Le eventuali riparazioni di assistenza e in garanzia sono direttamente a cura dell’azienda produttrice o
assicurate attraverso il rivenditore. In caso di reclamo è obbligatorio presentare il certificato di garanzia, un
documento che attesti l'acquisto del termocamino e il protocollo di consegna; inoltre bisogna specificare il
proprio indirizzo, numero di telefono e una descrizione del guasto. All’atto dell’acquisto è proprio interesse
richiedere al rivenditore un certificato di garanzia compilato in maniera ben leggibile e il protocollo di consegna.
La modalità e il luogo di riparazione saranno decisi (dopo valutazione del guasto) presso il reparto assistenza;
quindi saranno proposte adeguate misure soggette però a consultazione con il proprietario del termocamino. In
caso di sostituzione del termocamino o annullamento del contratto di compravendita si applicano le rispettive
disposizioni del Codice Civile e del regolamento reclami.
CERTIFICATO DI GARANZIA
CONDIZIONI DI RECLAMO E GARANZIA DELLA DITTA ROMOTOP spol. s r.o. VALIDE PER
L’ACQUIRENTE (CONSUMATORE)
1. Le presenti condizioni di reclamo e garanzia sono elaborate ai sensi dei rispettivi paragrafi del Codice Civile e del
Codice di Tutela del Consumatore.
2. Su richiesta del consumatore il rivenditore ha l’obbligo di rilasciare un documento che attesti l’acquisto del prodotto o
la fornitura del servizio, con specifica della data della vendita del prodotto o fornitura del servizio, tipo di prodotto o
servizio, prezzo del prodotto o servizio e dati identificativi del rivenditore – nome e cognome o ragione sociale, o
eventualmente nome commerciale del rivenditore, numero di identificazione, sede legale o luogo dell'esercizio – salvo
differenti disposizioni impartite da normative specifiche.
3. I prodotto ha una garanzia di 24 mesi. La garanzia inizia a decorrere dal momento del ritiro dell'oggetto da parte del
consumatore. Laddove sia necessaria la messa in servizio da parte di una ditta autorizzata o specializzata il periodo di
garanzia inizia a decorrere dalla data della messa in servizio, purché l'acquirente abbia provveduto ad ordinare la messa
in servizio entro tre settimane dal ritiro della merce ed abbia prestato regolare e puntuale collaborazione nel servizio
fornito.
4. La garanzia si applica a tutti i difetti di produzione e i difetti del materiale che sono venuti alla luce in maniera ben
dimostrabile nel corso del valido periodo di garanzia.
5. La garanzia non si applica in caso di usura della merce causata dal suo normale utilizzo - e inoltre:
- per i guasti originatisi per via di impiego o interventi scorretti o non idonei, per via di collegamento a un camino con
dimensioni non sufficienti o con cattivo tiraggio, per via di utilizzo non consono o mancata osservanza delle condizioni
d'uso e manutenzione (vedi Manuale d’uso).
- per i difetti causati da danni meccanici.
- se il prodotto è immagazzinato in locali umidi e non coperti o se è utilizzato in ambienti le cui condizioni non
corrispondono a quelle di un appartamento.
- per i danni conseguenti a catastrofi naturali, eventi meteorologici, danneggiamenti violenti.
- in caso di danneggiamento delle etichette di garanzia e della targhetta con i numeri di matricola.
- in caso di danni alla merce verificatisi durante il trasporto (in caso di trasporto a propria cura). In caso di trasporto a
cura di servizio esterno la questione viene risolta con un controllo sul posto.
- se i dati sul certificato di garanzia o sul documento d’acquisto sono diversi rispetto ai dati sulla targhetta di
produzione.
6. Per il materiale di consumo utilizzato in fase di riparazione o sostituzione di parte della stufa non si applica il periodo di
garanzia.
7. I reclami vanno presentati presso il rivenditore dove è stata acquistata la merce. Se però nel certificato di garanzia è
riportato un altro soggetto incaricato delle riparazioni più vicino al rivenditore o all'acquirente, l'acquirente ha diritto a
far eseguire la riparazione presso il soggetto incaricato dell’esecuzione della riparazione in garanzia. Il soggetto
incaricato della riparazione ha l’obbligo di eseguire la riparazione entro la scadenza concordata all’atto della vendita
della merce tra il rivenditore e l'acquirente.
8. Il rivenditore ha l’obbligo di rilasciare al consumatore una dichiarazione scritta attestante la data in cui il consumatore
ha esercitato il proprio diritto, il contenuto del reclamo e la modalità di evasione del reclamo richiesta dal consumatore;
inoltre deve richiedere sempre una certificazione scritta (entro 30 giorni) in merito all’esecuzione della riparazione e
alla data e modalità di evasione del reclamo, compreso attestato di esecuzione della riparazione e relativa durata, o
eventualmente dichiarazione scritta di reiezione del reclamo. Il suddetto obbligo si applica anche ad altri soggetti
incaricati dell’esecuzione della riparazione.
9. Durante i primi 6 mesi a partire dall’acquisto il reclamo sarà evaso come incongruenza con il contratto di
compravendita ai sensi della disposizione
t 616 del Codice Civile. Nei mesi successivi del periodo di garanzia si
procederà come da
t 622 del Codice Civile a seconda del fatto se si tratta di un guasto riparabile o irreparabile.
10. I reclami vengono accolti ed evasi solo e soltanto con l'acquirente.
11. Nel consegnare la merce in reclamo l'acquirente ha l'obbligo di comunicare o esibire la designazione del tipo di
prodotto e una descrizione dettagliata del difetto (indicando per esempio in quale modalità e come si manifesta il
guasto, quanto tempo dopo l'accensione, descrizione dell'impiego della merce prima della comparsa del guasto ecc.).
12. Quando esercita il diritto di reclamo l'acquirente ha l'obbligo di dimostrare che il reclamo viene presentato presso il
rivenditore che ha venduto il prodotto e che lo stesso è in garanzia. Ai fini dell’attestazione delle suddette circostanze si
consiglia vivamente di presentare:
- documento attestante la vendita
- certificato di garanzia controfirmato
- protocollo di consegna controfirmato
13. Per le altre procedure e circostanze non espressamente menzionate nelle presenti condizioni di reclamo e garanzia si
applicheranno le rispettive disposizioni del Codice Civile e del Codice per la Tutela del Consumatore.
PROTOCOLLO DI CONSEGNA
Committente: ................................................................................................................
Indirizzo di realizzazione: ...........................................................................................
.........................................................................................................
Realizzatore (soggetto responsabile della realizzazione): ........................................
.........................................................................................................
Elenco dei documenti: ..................................................................................................
.........................................................................................................
.........................................................................................................
Elenco dei difetti e delle incompletezze: .....................................................................
.........................................................................................................
Elenco delle divergenze rispetto al progetto (documentazione approvata): ...........
.........................................................................................................
.........................................................................................................
Concessione edilizia n.: ................................................................................................
Del giorno: ............................... Rilasciata da: ...................................................
Supervisione tecnica dell’investitore: .........................................................................
Data di inizio della procedura di consegna: ..............................................................
Data di termine della procedura di consegna: ..........................................................
Data di sgombero completo del cantiere: ...................................................................
Periodo di garanzia con decorrenza dal: ...................................................................
Prima accensione consentita in data: .........................................................................
In virtù della propria firma il cliente si assume l’obbligo di provvedere alla
sicurezza dell’opera presa in consegna contro possibili danni causati da persone
terze!!!
Il realizzatore (firma): ............................... lì: ................... località .............
Il committente (firma): .............................. lì: ................... località .............
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Olympia Fires Lugo bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Olympia Fires Lugo in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 0,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info