812264
73
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
Installation instructions
for the specialist company
LEVANA 2.0 6 kW
LEVANA 2.0 8 kW
LEVANA AQUA 2.0
ARINA 2.0
INARA 2.0
EN
2.10 Checking the installation and function
Check the fully completed installation (visual inspection)!
Switch the pellet replace on and check all of the functions, and
check the chimney ue for leaks! Carry out initial commissioning!
2.11 Initial commissioning by the specialist company
Please ensure that no objects made from ammable materials
are located or placed in the radiation range of the replace (min-
imum distance 800 mm, measured from the viewing window in
the combustion chamber door)!
Before heating for the rst time, check that all accessories have
been removed from the ash pan and combustion chamber! To do
this, release the ash pan lock, which is located behind the inspec-
tion door, and pull the ash pan out to the front! The combustion
chamber door lock is located underneath the combustion cham-
ber door.
Remove the protective lm from the touch control panel!
Convection air openings may not be covered!
The precautions for the combustion air supply may not be mod-
ied. In particular, care must be taken to ensure that the nec-
essary combustion air lines are open during operation of the
replace!
Plug the white and blue connector supplied into the socket on
the rear of the appliance. If the pellet replace should be operated
with accessories (e.g. room thermostat)! Connect the connection
cables to the connector rst!
Note: the connector must be plugged in even without acces-
sories, otherwise the pellet replace is not ready for operation.
Plug the shockproof plug into a 230 V/50 Hz shockproof socket.
Fill the pellet reservoir with pellets (see chap. 3.2)!
During initial commissioning, or if the pellet duct is empty, or
if the reservoir runs empty, a handful of pellets must be poured
into the burner trough towards the igniter. Otherwise, only the
pellet duct will be lled within the lling period in the start phase
and only an insucient 2-5 pellets will fall into the burner trough.
Fig. 2.41 Pour pellets in manually if the pellet duct is empty
Set the master switch to “I” (back right of the appliance)!
ū The touch control panel display is activated automatically.
Note: the smell which may occur as a result of curing of the
protective coating will disappear once the pellet replace has
been burning with good room ventilation for several hours.
Attention! Property damage! The pellet fireplace is coated
with a high-quality temperature-resistant coating which only
reaches its final strength after being heated for the first time.
You therefore should not place anything on the tiled pellet
fireplace or touch the surfaces as this may damage the
coating.
2.12 Handover of the system to the user
After installation, instruct the user of the system with regard to:
ū Use,
ū Operation,
ū Functioning,
ū Care and cleaning (user),
ū Necessary annual maintenance (specialist company)!
In particular, instruct the user of the system in the risks associated
with the pellet replace, as well as in the safety information and
safety precautions!
Fill out the handover certicate (blank form attached)!
Hand the product/the system over to the user together with this
manual and all other documents!
Commissioning certicate
The proper installation, commissioning and handover of the pellet
replace is documented by the commissioning certicate (sepa-
rate document). Instruction of the system user by the specialist
company, in particular in the risks associated with the pellet re-
place and in the safety information and safety precautions is also
certied by the specialist company and user’s signatures.
2.13 Disassembly and disposal
The applicable international, national and region-specic laws and
regulations at the time of disposal of the pellet replace must be
observed.
Take care to ensure that the recyclability of materials, and the pos-
sibility of disassembly and separation of materials and assem-
blies is taken into consideration as well as the environmental and
health risks of recycling and disposal. Material groups such as
plastics and metals of dierent types should be sorted before be-
ing sent for recycling or disposal!
The disposal and recycling of electrical and electronic compo-
nents must be done in accordance with the appropriate laws and
country-specic regulations!
We reserve the right to make technical changes
73
78-4643-2481_R6_LEVANA 2.0_ARINA 2.0_INARA 2.0_DE-EN-FR.indd 7378-4643-2481_R6_LEVANA 2.0_ARINA 2.0_INARA 2.0_DE-EN-FR.indd 73 11.04.2023 14:41:5211.04.2023 14:41:52
73

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Olsberg ARINA 2.0 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Olsberg ARINA 2.0 in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 34.97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info