424156
68
Verklein
Vergroot
Pagina terug
1/150
Pagina verder
61
TRANSMISSION
1. Call the correspondent in one of the three ways listed below.
a. by typing the correspondent’s facsimile number on the numeric keypad and pressing START to
confirm.
To delete an entire setting, press CLEAR.
If you want to make a correction, move the cursor to the digit to be changed (using < or >) and
overwrite it with the new digit. If you want to insert a blank between one digit and another, press the
> key to move the cursor one position forward.
One or more pauses can also be inserted in dialling, by pressing PAUSE/REDIAL, between the digits
that form the number. The pause is identified on the display by the character “p”. It is a good idea
to insert a pause between the code and the number. In some countries, an answering tone has to
be heard before the rest of the number can be dialled. If this is the case, press EXT/2nd D. TONE.
The display shows the symbol “:”.
If the facsimile machine is connected to an exchange and the correspondent is an external user,
press EXT./2nd D.TONE before entering the number. In this case, the display shows the letter “E”
before the numeric sequence.
If you want to switch from pulse to tone dialling, press
while entering the number.
b. by lowering the mask and pressing the one-touch dialling key under which the correspondent’s
number has been programmed (keys 01-24).
If, when you press a one-touch dialling key, the message “KEY NOT STORED” appears on the
display for a few seconds, this means that no number has been stored under that key. If this is the
case, refer to the “Programming one-touch keys” section of the “PROGRAMMING” chapter and
program the key.
c. by pressing SPEED DIAL followed by the speed dialling code under which the correspondent’s
facsimile number has been stored (codes 01-60).
If, when you set a speed dialling code, the message “CODE NOT STORED” appears on the display
for a few seconds, this means that no number has been stored under that code. If this is the case,
refer to the “Programming speed dialling codes - normal and extended” section of the
“PROGRAMMING” chapter and program the code.
If the correspondent’s number was dialled using a one-touch dialling key or a coded dialling code, it will
be displayed for a few seconds.
While the document is being stored, the message “STORING” appears on the display. Once it has been
stored, the message “STORING COMPLETE” on the first line of the display for a few seconds and the
message “PAG. No.: XX DOC. R.: XXXX” on the second line. The latter message provides you with
reference data you may require for document deletion or transmission cancellation operations, i.e. the
number of pages and the document reference number.
2. The facsimile machine starts to send the document. The TX/RX LED comes on.
If the correspondent does not answer or the line is busy, the facsimile machine, after a few seconds,
automatically retries transmission (automatic redial feature).
If the “LAST TX REPORT” was enabled in the operating configuration, the facsimile machine will print
the report at the end of transmission.
68

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Olivetti ofx 3100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Olivetti ofx 3100 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info