24
Using the Cash Register in a Password Protected
Mode
Using the Password to Access the Program Mode
If a manager password was defined to protect unauthorized access to
the PRG mode, proceed as follows to enter the specific password so that
you can work normally in this mode:
1. Slide the control switch to the PRG position.
2. Type the specific 4-digit password.
3. Press the [Charge] key.
Using the Password to Access the Z Management
Mode
If a manager password was defined to protect unauthorized access to
the Z mode, proceed as follows to enter the specific password so that you
can work normally in this mode:
1. Slide the control switch to the Z position.
2. Type the specific 4-digit password.
3. Press the [Amt Tend/TOTAL] key.
Calculator Mode
The calculator mode is a non-print mode that allows the use of the
numeric keys with the plus, minus, multiply, division and equal keys. The
[C] key can also be used in this mode. The calculator mode puts the
convenience of a calculator right at your fingertips and is useful when a
quick calculation is needed.
The calculator mode can only be accessed in the R1 or R2 position. It
cannot be accessed in the X or Z position nor in the middle of a sales
transaction.
If desired, you can assign a calculator mode password to restrict access
to this mode. If a password is assigned, an error tone will sound if an
attempt is made to enter the calculator mode without entering the
password.
In the calculator mode, the operational keys are limited to the following:
[C] Clear
[Amt Tend/TOTAL] =
[Department 1/7] +
[Department 4/10] -
[Department 2/8] x
[Department 5/11] +
[Numeric keys 0-9]
Entering the Calculator Mode
Proceed as follows to enter into the calculator mode:
1. Slide the control switch to the R1 or R2 position.
2. Hold down the [C] key and press the [Amt Tend/TOTAL] key.
3. The decimal point will appear on the display indicating that the
calculator mode is in operation.
