563100
65
Verklein
Vergroot
Pagina terug
1/81
Pagina verder
Troubleshooting > 65
Improper cut sheet feed
No paper feed.
Sheets are located off the
paper guide.
Load sheets with their left
edges against the paper
guide.
Sheets are not loaded to the
end.
Load sheets to the end.
Continuous forms instead of
cut sheets are fed.
The printer is in the
continuous forms mode.
Eject the continuous forms
and select cut sheet mode for
the printer.
Paper distortion.
Sheets are not loaded to the
end, or they are not inserted
straight.
Load sheets to the end.
Paper with wrinkles, folds or
other defects.
Change paper.
Paper not specified for the
printer.
Use paper types specified for
the printer.
Unable to eject.
The LF/FF
button is pressed.
Press the LOAD/EJECT
button.
Improper continuous forms feed.
No line feed, and no paper
feed.
Paper is off the Pin Tractors. Reload paper correctly.
The adjust lever position does
not match the paper type.
Set the adjust lever to the
correct position.
Paper distortion or jam. Forms are loaded with their
left holes out of line with the
right ones.
Load forms with their left
holes in line with the right
ones.
Inadequate distance between
the left and right Pin Tractors,
making for loose paper.
Relocate the Pin Tractors to
tighten the paper.
Skew paper feeding. Move the paper to make it
straight.
Paper movement is blocked. Remove the blockage.
Paper source is too far from
the printer.
Move the paper source nearer
to the printer.
Paper not specified for the
printer.
Use paper types specified for
this printer.
Several blank lines appear in
the printout.
Skip over perforation spacing
is selected.
Cancel the skip over
perforation spacing.
The selected skip over
perforation spacing does not
match the physical tear-off
perforation positions.
The paper length selected in
the application does not
match the physical paper
length.
Match the paper length
selected in the application
with the physical paper
length in use.
Select the paper length in
number of lines in the
application.
Abnormal switchover between cut sheet and continuous forms modes.
No cut sheet feed. The printer is in continuous
forms mode.
Set the Paper Type lever to
cut sheet mode.
No continuous forms feed. The printer is in cut sheet
mode.
Set the Paper Type lever to
continuous forms mode.
PROBLEM CAUSE ACTION
65

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Oki-ML5720

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Oki ML5720 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Oki ML5720 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info