665231
143
Verklein
Vergroot
Pagina terug
1/150
Pagina verder
- 143 -
6
6. Troubleshooting
6. Troubleshooting
This chapter explains initializing, deleting and updating drivers.
Initializing
This section explains how to initialize an SD memory card and ash memory and how to reset the
equipment settings to their defaults.
You can delete data or settings stored on the printer to restore the settings to how they were at the
time of purchase.
Note
In the default settings, [Initialize] cannot be selected because [No] is selected for [Enable Initialization] of
[Storage Setup] in [Boot Menu]. Set [Enable Initialization] of [Storage Setup] in [Boot Menu] to [Yes].
Memo
In order to access the [Admin Setup] menu, an administrator password is required. The default password is “aaaaaa”.
Initializing an SD memory
card
Carry out initialization of an SD card when
inserting a card that has been used in other
equipment or when the SD Card is not properly
recognized.
An SD memory card is used as storage for
spooling when making multiple copies, for saving
secure print/ encrypted print data, and for form
data and macros. Initialization deletes stored
data.
An SD memory card has three partitions. They
are PS, Common, and PCL. When an SD memory
card is initialized, each partition is respectively
divided into the percentage specied (in the
factory default setting, PS: 30%, Common:
50%, PCL: 20%). You can also format particular
partitions individually.
If an SD memory card that has been installed to
another device is installed to the printer, or if the
SD memory card installed to the printer cannot
be detected anymore, [Initialize Yes/No] may
appear on the display when the printer is turned
on. In such a case, select [Yes]. (Data stored in
the SD memory card is deleted.)
If [No] is selected and [Service call 067:Error]
appears on the display, turn off the printer and
detach the SD memory card, or turn off the
printer and turn it back on with the SD memory
card left installed, then select [Yes].
Formatting the Entire Area
You can format the entire area of the SD
memory card installed in the printer.
Note
When you initialize the entire area of an SD memory card,
the following data is deleted.
- Stored job data subject for [Secure Print],
[Encrypted Secure Print] or [Store to SD Card].
- Custom demo data
- Form data
1 Press the <ENTER> button
2 Press to select [Admin Setup] and
then press the <ENTER> button.
3 Enter the administrator password using
the ten-key pad.
The default password is “aaaaaa”.
4 Press the <ENTER> button.
5 Press to select [SD Card Setup] and
then press the <ENTER> button.
6 Make sure that [Initialize] is selected
and then press the <ENTER> button.
7 Make sure that [Execute] is selected
and then press the <ENTER> button.
A message appears notifying you that continuing
will automatically restart the system. Select
[Yes] to continue.
143

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Oki ES8441 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Oki ES8441 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Oki ES8441

Oki ES8441 Gebruiksaanwijzing - Nederlands - 164 pagina's

Oki ES8441 Gebruiksaanwijzing - Deutsch - 167 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info