492991
113
Verklein
Vergroot
Pagina terug
1/203
Pagina verder
Scanning Methods
-113-
Scanning
4
7 Press the to select [Select An
Application] and then press .
8 Press the to select where to send the
scanned document and then press .
9 Press or .
Memo
If you select [Application], the specified application starts
and the scanned image is displayed on the application.
If you select [Folder], the scanned image is saved in the
specified folder.
If you select [
PC-FAX
], the application for fax transmission
starts. After sending the scanned image, send your fax with
the fax transmission software on your computer.
WSD Scan connection
1 Press the <SCAN> key on the Operation
Panel.
2 Place the original on the automatic
document feeder or on the scanner glass.
3 Press the to select [Local PC] and
then press .
4 Check that the [Select A Connecting
PC] is selected, and press .
5 Press the to select [From WSD Scan]
and then press .
6 Press the to select the destination PC
and then press .
7 Press the to select [Duplex Scan]
and then press .
8 Press the or to select [ON] or
[OFF] and then press .
9 Press or .
Memo
To start the dual-sided scan, turn its setting On and place
the original on the automatic document feeder. If you turn
the dual-sided scan On but place the document on the
scanner glass, you cannot scan the dual sides of document.
When using the scanner application on PC, it will be
scanned by the scanner type of scan profile setup on PC,
regardless of where the document is set or the setting of
[
Duplex Scan
].
Scan to Remote PC
This will launch the Scanner driver from a utility
installed on the PC (ActKey, PaperPort, Image,
Adobe Photoshop CS3, etc.) and will begin scanning.
Connect the machine to a computer via USB or a
network.
TWAIN (USB connection and Network
connection) and WSD Scan are supported.
There are 3 Modes of Operation:
Simple Scan Mode, Manual Scan Mode, and
Secure Scan Mode.
In Simple Scan Mode, the scanning can be
started from all computers via USB, Network and
WSD Scan connection, without special operation
on the operator panel.
In Manual Scan Mode, the scanning can be
started from all computers via USB, Network and
WSD Scan connection.
In Secure Scan Mode, scanning can only be
performed by a machine among the already
registered computers in the network via USB,
Network and WSD Scan connection.
Only one computer can be connected at the
same time.
Memo
For the following procedure, ActKey will be used as an
example for Windows, and Adobe Photoshop CS3 for Mac
OS X. The items in this manual may differ depending on
the application you are using.
Note
Connect the machine to a computer via USB or a network.
Install an application (ActKey, PaperPort, etc.) and a
scanner driver before starting a scan job. This installation
is NOT required for WSD Scan connection.
If you connect the machine to network, follow these
instructions.
-Set [TCP/IP] setting to [Enable].
- Conform the IP version of the machine to that of your
computer.
- Set up the DNS server.
- Enable the network TWAIN setting.
When in Secure Scan Mode, the administrator needs to
register the computer information for carrying out security
scans from the control panel or the web site beforehand.
For Mac OS X, when carrying out a network scan for the
first time, you need to set the connection target when
using a driver. When you use the driver for the first time,
the connection target selection tool will launch.
You do not need to set the connection target after the first
time.
To operate the MFP in the WSD Scan connection, set the
followings.
-Set the [TCP/IP] setting of the MFP to [Enable].
- Match the IP version between the MFP and the PC.
- Enable the WSD Scan.
- Install the MFP on the PC.
Reference
For details on how to install a scanner driver, refer to
"Installing Scanner Drivers (TWAIN/WIA/ICA Driver)" P. 104.
OK
OK
MONO
COLO
R
OK
OK
OK
OK
OK
OK
MONO
COLO
R
113

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Oki ES4191 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Oki ES4191 in de taal/talen: Engels als bijlage per email.

De handleiding is 25,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Oki ES4191

Oki ES4191 Gebruiksaanwijzing - Nederlands - 222 pagina's

Oki ES4191 Gebruiksaanwijzing - Nederlands - 200 pagina's

Oki ES4191 Gebruiksaanwijzing - Deutsch - 229 pagina's

Oki ES4191 Gebruiksaanwijzing - Deutsch - 210 pagina's

Oki ES4191 Gebruiksaanwijzing - English - 182 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info