492990
160
Verklein
Vergroot
Pagina terug
1/182
Pagina verder
Changing Network Settings From the Web Page
- 160 -
47 Click [Finish].
48 On the IP security policy properties
window, click [OK].
49 On the [Local Security Policy] window,
select the new IP security policy.
50 From the [Action] menu, select
[Assign].
51 Check that for the new IP security policy,
[Policy Assigned] is displayed as
[Yes].
52 Click [X] on the [Local Security Policy]
screen.
Controlling Access Using IP
Address (IP Filtering)
You can control access to the machine using the
IP address. You can set whether to allow
configuration or printing from the IP addresses
specified. By factory default, IP filtering is
disabled.
Note
Be sure to specify the correct IP address. If you specify a
wrong IP address, you cannot access the machine using
the IP protocol.
When you enable IP filtering, the access to and from a host
that is not specified in these steps is rejected.
Memo
You can use only IPv4 for IP filtering.
1 Access the machine's web page and log
in as the administrator.
2 Select [Admin Setup].
3 Select [Network Manager]>
[Security]>[IP Filtering].
4 Follow the on-screen instructions to
specify detailed settings.
Note
If nothing is registered in[Administrator's IP
Address to Register], you may not be able to access
the machine depending on the specified IP address
range.
If you use a proxy server, [Your Current Local
Host/Proxy IP Address] and the IP address of your
host may not match.
5 Click [Send].
The network card reboots to enable the new
settings.
Control Access Using MAC
Address (MAC Address
Filtering)
You can control access to the machine using the
MAC address. You can allow or reject the access
from the specified MAC addresses.
Note
Be sure to specify the correct MAC address. If you specify
the wrong MAC address, you cannot access the machine
via a network.
Memo
You cannot specify to accept or to reject for each address
individually.
1 Access the machine's web page and log
in as the administrator.
2 Select [Admin Setup].
3 Select [Network Manager]>
[Security]>[MAC Address Filtering].
4 Follow the on-screen instructions to
specify detailed settings.
Note
If nothing is registered in [Administrator's MAC
Address to Register], you may not be able to access
the machine depending on the specified MAC address.
If you use a proxy server, [Your Current Local
Host/Proxy MAC Address] and the MAC address of
your host may not match.
5 Click [Send].
The network card reboots to enable the new
settings.
Error Notification by E-mail
(E-mail Alert)
You can set the machine to send an error
notification e-mail when an error occurs. You can
set when to be notified:
On a periodical basis
Only when an error occurs
Configuring Your Machine
You can configure the settings for e-mail alert
using the web page.
Memo
If you have configured the settings for Scan To Mail / Scan
To Internet Fax that are described in the "User's Manual
Basic", the server configuration is complete.
When you specify a domain name in [SMTP Server],
configure the DNS server in the [TCP/IP] setting.
160

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Oki ES4161 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Oki ES4161 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Oki ES4161

Oki ES4161 Gebruiksaanwijzing - Nederlands - 222 pagina's

Oki ES4161 Gebruiksaanwijzing - Nederlands - 200 pagina's

Oki ES4161 Gebruiksaanwijzing - Deutsch - 229 pagina's

Oki ES4161 Gebruiksaanwijzing - Deutsch - 210 pagina's

Oki ES4161 Gebruiksaanwijzing - English - 203 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info