665628
35
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
MULTIFUNCTIONAL DIGITAL COLOR SYSTEMS
Quick Start Guide
ES9460 MFP
ES9470 MFP
CX3535 MFP
CX4545 MFP
Lineup of Our Manuals
Some of these manuals are printouts and others are PDF les recorded in the User Documentation CD-ROM.
In the printouts, precautions and basic operations are described. Be sure to read “Safety Information” before using the
equipment. In the PDF les, detailed copying functions and other settings are described. Select and read those best suited to
your needs.
Printouts
ES9160 MFP/ES9170 MFP
ES9460 MFP/ES9470 MFP
CX3535 MFP/CX4545 MFP
Safety Information
This Safety Information describes the necessary precautions for use. For your added security, be
sure to read this booklet rst.
ES9460 MFP
ES9470 MFP
CX3535 MFP
CX4545 MFP
Quick Start Guide (This manual)
This Quick Start Guide describes the preparations, basic and advanced usage, maintenance and
regular cleaning of the equipment.
How to use the User Documentation CD
1. Set the User Documentation CD in the CD-ROM drive on your computer.
2. Open the [OKI MFP Manual] folder in the User Documentation CD and the [PDF] folder.
3. Double-click the le of the operators manual to be viewed. Its PDF le is displayed.
PDF les
Copying Guide
This Copying Guide describes the operations and settings
enabled with the [COPY] button on the control panel.
Scanning Guide
This Scanning Guide describes the operations and settings
enabled with the [SCAN] button on the control panel and
those of Internet Fax.
e-Filing Guide
This e-Filing Guide describes the operations and settings
enabled with the [e-FILING] button on the control panel
and the e-Filing web utility.
This e-Filing web utility enables you to operate e-Filing
using the browser on your computer.
MFP Management Guide
This MFP Management Guide describes the operations and
settings enabled with the [USER FUNCTIONS] button and
the [COUNTER] button on the control panel.
Software Installation Guide
This Software Installation Guide describes the installation
procedures for printer drivers and utilities.
Printing Guide
This Printing Guide describes the settings of printer drivers
required for printing and the various procedures.
TopAccess Guide
This TopAccess Guide describes procedures for remote
setup and management from a web-based utility,
TopAccess.
This TopAccess web utility enables you to manage the
equipment using the browser on your computer.
Troubleshooting Guide
This Troubleshooting Guide describes how to deal with
problems, such as paper jams, as well as how to react to
messages displayed on the touch panel.
Network Fax Guide
This Network Fax Guide describes the operations of the Fax
Driver.
The Fax driver enables you to send electronic documents as
faxes or Internet faxes from your computer.
GD-1250/GD-1260 Operators Manual for
FAX Unit
This Operator’s Manual describes how to use the fax
functions.
High Security Mode Management Guide
This High Security Mode Management Guide describes the
conditions and settings to use the equipment in the high
security mode.
Operator’s manuals of options
In the following options sold separately, the corresponding
operator’s manuals are co-packed.
GN-1060 Operator’s Manual for Wireless LAN Module
GN-2010 Operator’s Manual for Bluetooth Module
GP-1070 Operator’s Manual for Data Overwrite Enabler
KP-2004 Operator’s Manual for e-BRIDGE ID Gate
KP-2005 Operator’s Manual for e-BRIDGE ID Gate
To read manuals in PDF (Portable Document Format) les
Viewing and printing manuals in PDF les require that you install Adobe Reader or Adobe Acrobat Reader on your PC. If
Adobe Reader or Adobe Acrobat Reader is not installed on your PC, download and install it from the website of Adobe
Systems Incorporated.
2
How to Read This Manual
Symbols in this manual
In this manual, some important items are described with the symbols shown below. Be sure to read these items before
using this equipment.
Indicates a potentially hazardous situation which, if not avoided, could result in death, serious injury, or
serious damage, or re in the equipment or surrounding objects.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury,
partial damage to the equipment or surrounding objects, or loss of data.
Indicates information to which you should pay attention when operating the equipment.
Read the following description as required.
Describes handy information that is useful to know when operating the equipment.
Indicates the pages describing items related to what you are currently doing.
Description of original/paper direction
Paper or originals of A4 or B5 / LT size can be placed either in a portrait direction or in a landscape direction. In this
manual, “-R” is added to this paper size when this size of paper or original is placed in a landscape direction.
Example: A4 / LT size original on the original glass
Placed in a portrait direction: A4 / LT
Placed in a landscape direction: A4-R / LT-R
Paper or originals of A3 or B4 / LD or LG size can only be placed in a landscape direction, therefore “-R is not added to
these sizes.
Screens and Operation Procedures
In this manual, the screens and the operation procedures in Windows are described for Windows 7.
The details on the screens may dier depending on how the equipment is used, such as the status of the installed
options, the OS version and the applications.
The illustration screens used in this manual are for paper in the A/B format. If you use paper in the LT format, the display
or the order of buttons in the illustrations may dier from that of your equipment.
3
CONTENTS
How to Read This Manual .......................................................................2
Recommended toner cartridges ................................................................4
Chapter 1 PREPARATIONS
Description of Each Component .................................................6
Turning Power ON/OFF .........................................................13
Placing Paper and Originals ....................................................16
Installing Client Software .......................................................18
Chapter 2 BASIC OPERATION
Basic Copying Operation .......................................................22
Basic Fax Operation ............................................................26
Basic Scanning Operation ......................................................30
Basic e-Filing Operation ........................................................32
Basic Printing Operation ........................................................34
Basic Menu Operation ..........................................................36
Chapter 3 MAINTENANCE / TROUBLESHOOTING
Replacing Toner Cartridge ......................................................38
Replacing Waste Toner Box .....................................................39
Replacing Staple Cartridge .....................................................40
Regular Cleaning ...............................................................44
Troubleshooting ...............................................................45
Chapter 4 ADVANCED FUNCTIONS
Advanced Functions ...........................................................50
Chapter 5 INFORMATION ABOUT EQUIPMENT
Items Included in This Product ..................................................60
Client Utilities CD-ROM .........................................................61
Client Software ................................................................62
Options ........................................................................64
Logging in .....................................................................66
Specications of Equipment ....................................................69
Specications of Options .......................................................72
INDEX .........................................................................................77
4
Trademarks
The ocial name of Windows XP is Microsoft Windows XP Operating System.
The ocial name of Windows Vista is Microsoft Windows Vista Operating System.
The ocial name of Windows 7 is Microsoft Windows 7 Operating System.
The ocial name of Windows Server 2003 is Microsoft Windows Server 2003 Operating System.
The ocial name of Windows Server 2008 is Microsoft Windows Server 2008 Operating System.
Microsoft, Windows, Windows NT, and the brand names and product names of other Microsoft products are
trademarks of Microsoft Corporation in the US and other countries.
Apple, AppleTalk, Macintosh, Mac, Mac OS, Safari, and TrueType are trademarks of Apple Inc. in the US and other
countries.
Adobe, Acrobat, Reader, and PostScript are either registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
Mozilla, Firefox and the Firefox logo are trademarks or registered trademarks of Mozilla Foundation in the U.S. and
other countries.
IBM, AT and AIX are trademarks of International Business Machines Corporation.
NOVELL, NetWare and NDS are trademarks of Novell, Inc. in the US.
Other company and product names given in this manual or displayed in this software may be the trademarks of
their respective companies.
To assure optimal printing performance, we recommend that you use only genuine OKI toner cartridges. If you use an
OKI-recommended toner cartridge, you can utilize the following three functions of this equipment:
Cartridge detecting function:
This function checks if the toner cartridge is correctly installed and noties you if it is not.
Toner remaining check function:
This function noties you when there is little toner remaining in the cartridge, as well as notifying it to your authorized
service representative automatically by the remote service.
Image quality optimization function:
This function controls image quality according to the characteristics of the toner to be used and enables you to print
images of an optimal quality.
If you are using a toner cartridge other than the one we recommend, the equipment may not be able to detect whether
it is installed or not. Therefore, even if the toner cartridge is correctly installed, the error message TONER NOT
RECOGNIZED” appears on the touch panel and printing may not be performed. You may also not be able to utilize the
image quality optimization function, the toner remaining check function and the remote service function notifying your
authorized service representative automatically.
If you are using a toner cartridge other than the one we recommend, toner is not recognized. If this is a problem for you,
please contact your service representative. Remember you will not be able to utilize the Toner remaining check function
and Image quality optimization function as we mentioned.
Recommended toner cartridges
Description of Each Component ..........................6
Turning Power ON/OFF ..................................13
Placing Paper and Originals .............................16
Installing Client Software ................................18
Chapter 1
PREPARATIONS
Chapter 1 PREPARATIONS
Description of Each Component
This section describes the names and operations of the equipment, control panel and touch panel.
6
1.
Reversing Automatic Document Feeder
(optional, MR-3022)
The stack of originals is scanned one sheet at a time. Both
sides of the originals can be scanned. A maximum of 100
sheets (80 g/m
2
or 20 lb. Bond) can be placed in one go.
(The maximum number of sheets that can be set may vary
depending on the media type of the originals.)
2. Operator’s Manual Pocket (back side, optional,
KK-1660)
Keep the manual in this pocket.
3. Main power switch
Use this switch to turn the power of the equipment ON or
OFF.
P.13 Turning Power ON/OFF
4. USB port
Use this connector when printing les stored in a USB
device or storing scanned data into the USB device.
5. USB terminal (4-pin)
Use this terminal when connecting this equipment to a PC
with a commercially available USB cable.
6. Network interface connector
Use this connector when connecting this equipment to a
network.
7. Automatic duplexing unit
This unit makes copies on both sides of the paper. Open it
when paper jams occur.
8. Bypass tray
Use this to perform printing on special media types such
as OHP lm, waterproof paper, etc.
P.25 “Bypass copying” in this manual
9. Paper feed cover
Open this cover when releasing paper misfed in the
drawer feeding area.
10. Paper Feed Cover (optional)
Open this cover when releasing paper misfed in the Paper
Feed Pedestal (optional) or Large Capacity Feeder
(optional).
11. Paper size indicator
The size of the paper set in the drawer can be checked.
12. Paper Feed Pedestal (optional, KD-1027) and
Additional Drawer Module (optional, MY-1035)
or Large Capacity Feeder (optional, KD-1028)
Use the Paper Feed Pedestal (optional) to add one drawer.
The Additional Drawer Module (optional) can be installed
in this device.
A maximum of 2500 sheets (80 g/m
2
or 20 lb. Bond) of
plain paper can be placed in the Large Capacity Feeder
(optional).
13. Drawer
A maximum of 550 sheets (80 g/m
2
or 20 lb. Bond) or 500
sheets (105 g/m
2
or 28 lb. Bond) of plain paper can be
placed in one go.
P.16 “Placing paper in this manual
14. Front cover
Open this cover when you replace the toner cartridge and
clean the charger.
Front / Right side
14
13
12
11
1
7
8
9
10
Back side
2
3
4
5
6
Back side
1
Description of Each Component
7
Left / Inner side
1. Platen sheet
Use this to hold the original on the original glass to scan it.
P.44 “Regular Cleaning” in this manual
2. Original glass
Use this to copy three-dimensional originals, book-type
originals and special paper such as OHP lm or tracing
paper, as well as plain paper.
3. Touch panel
Use this to set and operate various types of functions such
as copying, scanning and fax. This also displays messages,
such as when paper runs out or paper jams occur.
P.11 Touch panel” in this manual
4. Control panel
Use this to set and operate various types of functions such
as copying and fax.
P.8 “Control panel” in this manual
5. Toner cartridge
When toner runs out, the message appears on the touch
panel. Replace the cartridge following the procedure
below.
P.38 “Replacing Toner Cartridge” in this manual
6. Charger cleaner
Use this if unevenness occurs on the copied or printed
paper.
Troubleshooting Guide (PDF): “Chapter 1:
TROUBLESHOOTING FOR THE HARDWARE”
7. Slit glass cleaner
Use this if white streaks occur on the copied or printed
paper.
Troubleshooting Guide (PDF): “Chapter 1:
TROUBLESHOOTING FOR THE HARDWARE”
8. Waste toner box
When “Dispose of used toner appears on the touch panel,
replace the waste toner box according to the following
procedures.
P.39 “Replacing Waste Toner Box” in this manual
9. Paper exit stopper
Use this to prevent the exiting paper from falling. Open
this when you make many copies or prints on a larger size
of paper such as A3, B4, LD and LG.
10. Receiving tray
Printed paper exits into this tray. The loading capacity is
approx. 550 sheets (90 g/m
2
28 lb. Bond). This may vary
depending on the paper conditions such as the degree of
paper curling.
11. Scanning area
The data of originals transported from the Reversing
Automatic Document Feeder (optional) are scanned here.
P.44 “Regular Cleaning” in this manual
12. Original scale
Use this to check the size of an original placed on the
original glass.
Yellow Magenta Cyan Black
10
12
11
9
5
8
7
6
3
4
2
1
Items marked (optional) are sold separately. In addition to those on P.6 and
P.7, you will nd more on other pages.
P.64 “Options” in this manual.
Chapter 1 PREPARATIONS
8
Control panel
Use the buttons on the control panel for various operations and settings in the equipment.
1. [e-FILING] button
Use this button to access stored image data.
2. [COPY] button
Use this button to access the copying function.
3. [MENU] button
Use this button to display frequently used templates.
4. [USER FUNCTIONS] button
Use this button for paper size or media type setting of
drawers, and registration of the copy, scan and FAX
settings including a default setting change.
MFP Management Guide (PDF): “Chapter 1: SETTING
ITEMS (USER)”
MFP Management Guide (PDF): “Chapter 2: SETTING
ITEMS (ADMIN)”
5. [INTERRUPT] button
Use this button to interrupt print processing and perform
a copy job. The interrupted job is resumed through your
pressing this button again.
6. [COUNTER] button
Use this button to display the counter.
MFP Management Guide (PDF): “Chapter 3: MANAGING
COUNTERS (COUNTER MENU)”
7. [ENERGY SAVER] button
Use this button for the equipment to enter the energy
saving mode.
8. ON/OFF lamp
This green lamp lights when the [POWER] button is ON.
9. MAIN POWER lamp
This red lamp lights when the main power switch is ON.
10. [POWER] button
Use this button to turn the power of the equipment ON or
OFF (shutdown).
11. Digital keys
Use these keys to enter any numbers such as the number
of copies, telephone numbers or passwords.
12. [FUNCTION CLEAR] button
When this button is pressed, all selected functions are
cleared and returned to the default settings. If the default
setting is changed on the control panel, and then copying,
scanning, Fax or similar is performed, this button blinks.
13. [STOP] button
Use this button to stop any scanning and copying
operations in progress.
14. [START] button
Use this button to start copying, scanning and Fax
operations.
15. [CLEAR] button
Use this button to correct the numbers keyed in, such as
the number of copy sets.
16. Alarm lamp
This red lamp lights when an error occurs and some action
needs to be taken.
17. PRINT DATA lamp
This green lamp lights during reception of data such as
print data.
18. [ACCESS] button
Use this button when the department code or user
information has been set. If this button is pressed after
copying, etc., the next user needs to enter the department
code or user information.
P.66 “Logging in in this manual
19. MEMORY RX / LINE lamps
These lamps light in the status of the fax data reception
and fax communication. The equipment can be operated
even while these lamps are lighting.
8 9
10
11
12
13
14
7654
321
22 21 20 19
23
15161718
1
Description of Each ComponentDescription of Each Component
9
20. [FAX] button
Use this button to access the Fax / Internet Fax function.
21. [PRINT] button
Use this button to access the printing functions such as
private printing, in this equipment.
22. [SCAN] button
Use this button to access the scanning function.
23. Touch panel
Use this panel for the various settings of the copying,
scanning and Fax functions. This also displays messages,
such as when paper runs out or paper jams occur.
Chapter 1 PREPARATIONS
10
Adjustment of the angle of the control panel
Adjusting the angle of the control panel
The angle of the control panel is adjustable between 7 and 52
degrees.
When changing the angle of the control panel, be careful not to catch your hands in the gap between the equipment and
the control panel.
This could injure you.
1
Description of Each Component
11
Touch panel
When the power is turned ON, the basic menu for copying functions is displayed on this touch panel. The status of the
equipment is also displayed on the touch panel with messages and illustrations.
The menu shown at the time of turning the power ON can be changed to one for functions other than copying, for
example, Fax function. Contact your service technician or representative for details.
1. Function display
The function being used, such as copying or fax, is
displayed.
2. [?] (HELP) button
Use this button to view the explanation of each function
or the buttons on the touch panel.
P.47 “Using the Help functions” in this manual
3. [JOB STATUS] button
This indicates the processing status of copy, fax, scan or
print jobs, and also allows you to view their performance
history.
4. Date and time
The present date and time are displayed.
5. Alert message indication area
This shows alert messages such as when the toner
cartridges must be replaced.
6. Message indication area
The explanation of each operation or the current status is
displayed in message form.
Message displayed
The following information appears on the touch panel:
Equipment status
Operational instructions
Cautionary messages
Reproduction ratios
Number of copy sets
Paper size and amount of paper remaining in a selected drawer
Date and time
Touch buttons
Press these buttons on the touch panel lightly to set various functions.
Adjusting the contrast of the touch panel
You can set the contrast of the touch panel in the USER FUNCTIONS menu entered by pressing the [USER FUNCTIONS]
button on the control panel.
MFP Management Guide (PDF): “Chapter 1: SETTING ITEMS (USER)” - “Setting General Functions”
5
6
3
4
1
2
Chapter 1 PREPARATIONS
12
Setting letters
The following menu is displayed when the entry of any letter is required for scanning or e-Filing, etc.
Use the buttons on the touch panel for letter entry.
After entering the letters, press [OK]. The menu will be changed.
The following buttons are used for letter entry.
[Basic]: Press this to access the basic keys.
[Symbol]: Press this to access the symbol keys.
[Other]: Press this to access the special keys.
[Caps Lock]: Press this to switch capital letters and small letters.
[Shift]: Press this to enter capital letters.
[Space]: Press this to enter a space.
: Press these to move the cursor.
[Back Space]: Press this to delete the letter before the cursor.
[Clear]: Press this to delete all letters entered.
[CANCEL]: Press this to cancel the entry of letters.
[OK]: Press this to x all entered letters.
1
Turning Power ON/OFF
This section explains how to turn the power ON and OFF as well as the energy saving mode. How to turn the power ON diers
between when the MAIN POWER lamp (red) on the control panel is lit and when it is not.
Turning Power ON/OFF
13
When the equipment is controlled under the department or user management function, enter the department code or user
information rst. For details, see the following page:
P.66 “Logging in in this manual
Turning the power ON
When the MAIN POWER lamp (red) on the control panel does not light:
Open the main power switch cover and turn the power ON
there.
When the MAIN POWER lamp (red) on the control panel lights:
The equipment will be ready for copying after about 89 seconds for 230 V ES9460 MFP, about 99 seconds for 115 V
CX3535 MFP, and about 160 seconds for ES9470 MFP/CX4545 MFP, and “READY” appears.
When you turn the power of the equipment OFF, be sure also to shut it down by pressing the [POWER] button on the
control panel. Do not simply turn the main power switch OFF. For details, see the following page:
P.14 Turning the power OFF (Shutdown)” in this manual
When “ERASING DATA appears
This message appears when the Data Overwrite Enabler (optional) has been installed. It appears immediately after the
power is turned ON or after the equipment has been operated. You can operate the equipment even if it is displayed.
Press the [POWER] button.
The equipment starts warming-up. “Wait Warming Up” appears
during warming-up.
While the equipment is warming up, you can use the auto job
start function. For details, refer to the following guide:
Copying Guide (PDF): “Chapter 2: HOW TO MAKE COPIES -
“Making Copies”
Chapter 1 PREPARATIONS
14
Turning the power OFF (Shutdown)
When turning the power of the equipment OFF, be sure to shut it down according to the procedure below. Check the
following three points before shutdown.
No jobs should be left in the print job list.
None of the PRINT DATA lamp (green) or the MEMORY RX / LINE lamps (green) should be blinking.
(If the equipment is shut down while any of the above lamps is blinking, jobs in progress such as FAX reception will be
aborted.)
No computer should access the equipment via the network, such as TopAccess.
When the ON/OFF lamp (green) lights on the control panel, do not simply press the main power switch to turn the power OFF. The
stored data may be lost or the hard disk may be damaged.
If a job in process exists when the [POWER] button of the control panel is pressed, “Processing job will be deleted. Are you sure you
want to shutdown?” appears.
The power of this equipment is automatically turned ON when print data or fax data are received or when the time set for “Scheduled
Print” has come during the Super Sleep mode.
When the equipment is not used for a long period of time:
Press the [POWER] button on the control panel to
shut down the equipment, check that the ON/OFF
lamp (green) is not lit and then turn the power OFF
with the main power switch.
When the power is turned OFF with the main power switch, the
MAIN POWER lamp (red) will go out.
Press the [POWER] button until a “pip” sound is
heard.
“Shutdown is in progress. appears for a while, and then the
power is turned OFF.
1
Description of Each Component
15
Saving energy when not in use – energy saving modes –
This equipment supports three energy saving modes; the Automatic Energy Save mode, Sleep mode and Super Sleep
mode. The table below shows the procedures to switch modes manually and the conditions under which the equipment
enters into or recovers from each mode.
Energy saving
modes
Procedure to switch
modes
Conditions to enter into
the mode
Status of equipment
Conditions to recover
from the mode
Automatic
Energy Save
mode
When a specied period of
time
*1
has passed since the
last use of the equipment.
“Saving energy - press
START button. appears on
the touch panel.
When a button on the
control panel
*2
is pressed
or when print data or fax
data are received.
Sleep mode
When the [ENERGY SAVER]
button
*3
is pressed or
when a specied period of
time
*4
has passed since the
last use of the equipment.
When a particular option
*5
is installed or when a
particular protocol
*6
is
enabled.
The touch panel display
goes o and the [ENERGY
SAVER] button lights in
green.
Same as the Automatic
Energy Save mode.
Super Sleep
mode
When the [ENERGY SAVER]
button
*3
or the [POWER]
button
*7
is pressed or
when a specied period of
time
*4
has passed since the
last use of the equipment.
When a particular option
*5
is not installed and also
when a particular protocol
*6
is disabled.
Only the MAIN POWER
lamp (red) lights.
When the [POWER] button
is pressed, when print or
fax data are received
through a wired LAN or
when the time set for
Scheduled Print has come.
*1 The default value set at the factory shipment is 1 minute.
*2 Any of the [START], [ENERGY SAVER], [COPY], [e-FILING], [SCAN], [PRINT] and [FAX] buttons.
*3 [ENERGY SAVER] button on the control panel.
*4 The default value set at the factory shipment is 1 minute (The default value set at the factory shipment of the European version is 10 minutes).
*5 Any of the Wireless LAN Module, Bluetooth Module and e-BRIDGE ID Gate.
*6 Any of IPX, AppleTalk and other protocols. When the IPsec function is enabled, the equipment enters into the Sleep mode. For details, refer to the
following guide:
TopAccess Guide (PDF): “Chapter 8: [Administration] Tab Page - “[Setup] Item list
*7 Even if you press the [Power] button, the equipment may not enter into the Super Sleep mode and the power may be turned OFF, depending on the
state of the equipment. For the conditions under which the equipment enters into the Super Sleep mode, refer to the following guide:
TopAccess Guide (PDF): “Chapter 8: [Administration] Tab Page - “[Setup] Item list
For changing the set period of time for entering into each mode, refer to the following guide:
MFP Management Guide (PDF): “Chapter 2: SETTING ITEMS (ADMIN)” - “Setting General Functions”
When the set period of time for switching to the Automatic Energy Save mode is the same as that for the Sleep mode or
the Super Sleep mode, the equipment enters into the Sleep mode or the Super Sleep mode after the set period of time.
For the European version
Contact your service representative to change the default settings noted above.
Chapter 1 PREPARATIONS
Placing Paper and Originals
This section explains how to set paper and originals. Incorrect setting causes image skews or paper jams. Follow the
procedure below.
16
2
1
1
Pull out the drawer and set the end guide so that
it matches the paper size.
1
2
3
3
2
Release the lock and set the side guides so that
they match the paper size.
2
1
3
Place paper in the drawer, and lock the side
guides.
4
Push in the drawer.
Be sure that the height of the stacked paper does not exceed
the MAX line indicated on the side guides.
Placing paper
Be careful not to catch your ngers when pushing the
drawer back.
This could injure you.
For paper available for the equipment, see the following
page:
P.69 “Specications of Equipment in this manual
Paper can be placed in the Paper Feed Pedestal (optional)
and the Additional Drawer Module (optional) following the
above procedure. For placing paper in the Large Capacity
Feeder (optional), refer to the following guide:
Copying Guide (PDF): “Chapter 1: BEFORE USING
EQUIPMENT - “Placing Paper
1
Description of Each Component
17
Placing originals
Original glass
1
Raise the Original Cover (optional) or the
Reversing Automatic Document Feeder (optional).
2
Place the original with its face down on the
original glass and align it against the left rear
corner.
3
Lower the Original Cover (optional) or the
Reversing Automatic Document Feeder (optional)
carefully.
Reversing Automatic Document
Feeder (optional)
1
Place the originals face up on the original feeder
tray.
2
Align the side guides to the original length.
Do not place any heavy objects (4 kg (9 lb.) or over) on
the original glass and do not press on it with force.
Breaking the glass could injure you.
A4-R
(
LT-R
)
B4
(
LD
)
When placing mixed-size originals on the Reversing
Automatic Document Feeder (optional), adjust its side guides
to the widest original, and then align the originals against the
guide on the front side.
Chapter 1 PREPARATIONS
Installing Client Software
How to install the client software such as the printer driver from the Client Utilities CD-ROM co-packed with the equipment is
described as follows.
18
Recommended installation
The recommended client software such as the printer driver can be installed all in one go.
Turn the power ON and conrm that “READY” appears on the touch panel.
P.13 Turning Power ON/OFF” in this manual
11
Insert the Client Utilities CD-ROM in the CD-ROM drive of a Windows computer.
22
To install the client software, log onto Windows with a user account which enables the installation such as
Administrators”.
For using Firewall software, refer to the following Guide.
Software Installation Guide (PDF): “1.OVERVIEW Precautions for Using Firewall Software”
Select [I agree to the terms of the License Agreement.] and click [Next].
33
Click [Recommended].
44
Click [Install].
55
A list for the discovered printers is displayed. Then
1
select this equipment on the list and
2
click [OK].
66
2
1
1
Description of Each Component
19
When the installation is completed, click [Finish].
77
Click [Exit] and then [Yes] to nish the installation.
88
For details of the Client Utilities CD-ROM, see the following
page.
P.61 “Client Utilities CD-ROM“ in this manual
For details of the recommended installation, refer to the
following guide.
Software Installation Guide (PDF): “Chapter 2:
RECOMMENDED INSTALLATION”
Setting the printer driver
Before using the printer driver, you must congure the options installed in the equipment.
Select [Devices and Printers] in the [Start] menu.
11
Select OKI PCL Printer, right-click and then click [Printer Properties].
22
The conguration data of the options can be obtained automatically by opening the
[Device Settings] tab menu.
33
Click [OK]. The setting is completed.
44
Chapter 1 PREPARATIONS
20
Chapter 2
BASIC OPERATION
Basic Copying Operation ................................22
Basic Fax Operation .....................................26
Basic Scanning Operation ...............................30
Basic e-Filing Operation .................................32
Basic Printing Operation ................................34
Basic Menu Operation ...................................36
Chapter 2 BASIC OPERATION
22
Basic Copying Operation
The basic copying procedures, such as enlargement/reduction copying and duplex copying as well as bypass copying, are as
follows.
Place the original(s).
P.17 “Placing originals” in this manual
Making copies
1
Key in the desired number of copies, and then
2
press the [START] button on the
control panel. Copying starts.
To stop copying, press the [STOP] button on the control
panel and then [MEMORY CLEAR] on the touch panel.
Printed paper exits to the exit tray of the equipment or the
Finisher (optional). The tray to which the paper exits is
indicated by the arrow on the touch panel.
Select the copy modes as required.
Press the [COPY] button on the control panel.
2
1
You can switch the color mode. There are 3 color modes as
shown below.
FULL COLOR: All originals are copied in full color. (Default)
BLACK: All originals are copied in black and white.
AUTO COLOR: The equipment automatically judges the
type of each color on originals. Colored
originals are copied in full color and black-
and-white originals are copied in black and
white.
2
Basic Copying Operation
23
Enlargement and reduction
copying
Press [ZOOM].
1
Select the desired paper size,
2
press [AMS], and then
3
[OK].
Align the originals according to the desired paper
size and direction. The size of the originals will be
automatically determined.
When copying a set of originals whose sizes and
directions are dierent, press [MIXED SIZE].
Selecting nishing mode
(sorting)
Press [FINISHING].
1
Press [SORT] and then
2
[OK].
To set the staple and the hole punch mode, the
optional nishing devices are needed. For the
necessary options, see the following page.
P.64 “Options” in this manual
For example, when “Original 1”, “Original 2” and
“Original 3” are copied in 2 sets, they can be made
as follows.
When you use the Reversing Automatic Document
Feeder (optional), the sorting mode is automatically
set.
2
3
1
2
1
2
3
3
1
2
3
1
2
3
1
2
3
1
2
3
1
1
2


Chapter 2 BASIC OPERATION
24
Setting duplex copy
Press [2-SIDED].
1
Select the desired duplex mode and
then
2
press [OK].
You can choose from 5 types.
For example, the following settings can be made.
1-sided original to 2-sided copy:
2-sided original to 2-sided copy:
Setting original mode
Press [ORIGINAL MODE].
1
Select the desired original mode
and then
2
press [OK].
The selectable original mode diers depending on
the color mode. In the full color mode, you can
choose from 5 types.
For example, the following settings can be made.
Originals with text and
photographs mixed:
1
2
1
2
2
Basic Copying Operation
25
Density adjustment
To lighten the density, press , to darken it, press
.
You can manually adjust the density by
pressing either
or .
The automatic density adjustment is set by default.
Press [AUTO] to adjust the density
automatically.
Bypass copying
Place paper face down on the bypass
tray.
Press [PAPER TYPE] if the type of the paper you
placed on the bypass tray is other than plain paper.
1
Press the button corresponding to
the size of paper set on the bypass tray
and then
2
[OK].
Press the [START] button. Bypass
copying starts.
2
1
Chapter 2 BASIC OPERATION
Basic Fax Operation
The basic procedures for sending a fax (the FAX Unit is optional), such as specifying fax numbers in the address book or setting
the transmission conditions, are as follows.
26
Press the [FAX] button on the control panel.
Sending a fax
If you make a mistake when entering a fax number,
press [BACK SPACE] on the touch panel to delete them
one by one.
Or press the [CLEAR] button on the control panel or
[CLEAR] on the touch panel to delete all the numbers
you entered.
Alternatively, you can press the [START] button on the
control panel to send a fax.
Key in the fax number of the recipient by pressing [INPUT FAX No.] on the touch panel or
the digital keys on the control panel.
Press [SEND] on the touch panel. The fax starts being sent.
Place the original(s).
P.17 “Placing originals” in this manual
2
Basic Fax Operation
27
Specifying recipients in the
address book
Specifying recipients one by one
1
Press the [SINGLE] tab to display the list of
addresses, and then
2
the recipient’s fax
icon.
Conrming recipients
Press [DESTINATION].
The recipient list screen is displayed.
Select the recipient you want to delete, and then
press [DELETE].
2
1
Specifying recipients in groups
1
Press [GROUP] tab to display the list of the
groups, and then
2
the group name.
You can specify up to a total of 400 recipients (single
and group).
To cancel a selected recipient, press it again.
2
1
Chapter 2 BASIC OPERATION
28
Setting the transmission
conditions
Canceling reserved
transmissions
Press [OPTION].
The transmission condition setting
screen is displayed. Press
or to
switch the pages.
Press [JOB STATUS].
RESOLUTION: Set the resolution based on the
neness of the original.
ORIGINAL SIZE: Set the scan size of the original.
After each item is set, press [OK].
1
Press [FAX],
2
select the reserved
transmission you want to delete, and
then
3
press [DELETE].
2
3
1
Press [DELETE] on the conrmation
screen. The reserved transmission is
deleted.
2
Basic Fax Operation
29
Checking communication
status (log)
Press [JOB STATUS].
1
Select the [LOG] tab and then
2
press [SEND].
The communication status list is
displayed. If [OK] is indicated in the
“Status”, the transmission succeeded.
To register recipients in the address book from the
send/receive log screen, select the record in the
send or receive log, and then press [ENTRY].
Press [RECEIVE] to check the fax reception log.
Registering recipients
Press the [USER FUNCTIONS] button on
the control panel and then [ADDRESS]
on the touch panel.
1
Press an open button to create a
new recipient and then
2
[ENTRY].
1
Press each button on the touch
panel to enter the following recipient
information, and then
2
[OK] to
register it.
1
2
1
2
2
1
Chapter 2 BASIC OPERATION
30
Basic Scanning Operation
How to store the scanned data in a shared folder and store these data in a Windows computer is described as follows.
Press the [SCAN] button on the control
panel.
Press [FILE] on the touch panel.
Storing the scanned data in a shared folder
Press [SCAN] on the touch panel.
Scanning starts.
66
1
Set [FILE NAME],
2
FILE FORMAT,
etc. and then
3
press [OK].
3
1
2
Place the original(s).
P.17 “Placing originals” in this manual
Change the scan settings as required.
55
2
Basic Scanning Operation
31
To store the scanned data of a shared folder in a Windows
computer
Start up Windows Explorer.
Enter the name of the shared folder, in which the IP address of the equipment and the
scanned data are stored, in the address bar with the following format, and then press the
[Enter] button.
Format: \\[IP address of the equipment] \le_share
e.g.) When the IP address of the equipment is 172.16.16.110, enter
\\172.16.16.110\le_share in the address bar of Windows Explorer.
Store the scanned data in a Windows computer.
For the IP address of the equipment, ask your network administrator.
It is convenient to make a shortcut of the “le_share folder, since step 2 can be
omitted.
The scanned data stored in the shared folder will be automatically deleted in 30 days by default.
Be sure to store them in a Windows computer before that.
Chapter 2 BASIC OPERATION
32
Basic e-Filing Operation
e-Filing is a function to store documents in the hard disk of the equipment, they can then be printed as required.
Press the [COPY] button on the control
panel.
Storing documents
The originals are stored as e-Filing documents in the equipment.
1
Press [STORAGE] and then
2
[STORE TO E-FILING] on the touch
panel.
1
Specify the box to be stored and the
document name, and then
2
press
[OK].
Press the [START] button on the control
panel to store the documents.
55
When “Print this document?” appears, press [YES] if
you want to do this as well as store it.
You can store documents not only by copying them but also by scanning them or using the printer driver. For details, refer to the
following guides:
Scanning Guide (PDF): “Chapter 2: BASIC OPERATION” - “Scan to e-Filing
Printing Guide (PDF): “Chapter 2: PRINTING FROM WINDOWS” - “Printing with the Best Functions for Your Needs”
1
2
2
1
Place the original(s).
P.17 “Placing originals” in this manual
2
33
Basic e-Filing Operation
Press the [e-FILING] button on the control panel.
Printing Documents
The procedure for printing documents stored in e-Filing is as follows.
Selected documents can be previewed in thumbnailed form.
Selected documents can be deleted from e-Filing.
This enables you to make print settings, such as selecting the duplex printing mode or adding page
numbers.
Specied pages of the document can be printed for conrmation.
1
Select the document you want to print, and then
2
press [PRINT]. Printing starts.
2
1
Select the box on the touch panel that contains the document you want to print.
35

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Oki CX4545 MFP bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Oki CX4545 MFP in de taal/talen: Engels als bijlage per email.

De handleiding is 4,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info