Appendix B – menu system > 83
M
ENUS
EXAMPLE
1 –
TRAY
1
TRANSPARENCIES
To print on transparencies (accommodated in Tray1):
1. Ensure that the LCD panel indicates that the printer is ready to print.
2. Enter menu mode by pressing either the Up-arrow or Down-arrow button and
press them repeatedly as required until the MENUS MENU is highlighted.
3. Press the Enter button to select this menu.
4. Press the Up-arrow or Down-arrow buttons repeatedly until TRAY CONFIGURATION
is highlighted.
5. Press the Enter button to select this Item.
6. Press the Up-arrow or Down-arrow buttons repeatedly until TRAY1 CONFIG is
highlighted.
7. Press the Enter button to select this Item.
8. Press the Up-arrow or Down-arrow buttons repeatedly until MEDIATYPE is
highlighted.
9. Press the Enter button to select this Item.
10. Press the Up-arrow or Down-arrow buttons repeatedly to move through the range
of media types until TRANSPARENCY is highlighted.
11. Press the Enter button to select this value.
12. Check that an asterisk (*) appears beside TRANSPARENCY.
13. Press the Online button to exit menu mode and return to the ready to print status.
M
ENUS
EXAMPLE
2 – MP
TRAY
PAPER
SIZE
To set paper size in the MP Tray:
1. Ensure that the LCD panel indicates that the printer is ready to print.
2. Enter menu mode by pressing either the Up-arrow or Down-arrow button and
press them repeatedly as required until the MENUS MENU is highlighted.
3. Press the Enter button to select this menu.
4. Press the Up-arrow or Down-arrow buttons repeatedly until TRAY CONFIGURATION
is highlighted.
5. Press the Enter button to select this Item.
6. Press the Up-arrow or Down-arrow buttons repeatedly until MP TRAY CONFIG is
highlighted.
7. Press the Enter button to select this Item.
8. Press the Up-arrow or Down-arrow buttons repeatedly until PAPER SIZE is
highlighted.
9. Press the Enter button to select this Item.
10. Press the Up-arrow or Down-arrow buttons repeatedly to move through the range
of paper sizes until the required size is highlighted.
11. Press the Enter button to select this value.
12. Check that an asterisk (*) appears beside the chosen size.
13. Press the Online button to exit menu mode and return to the ready to print status.