Installing upgrades > 65
W
IRELESS
LAN M
ODULE
P
RECATIONS
WHEN
USING
WIRELESS
LAN
Carefully read the following precautions before using the machine in a wireless LAN
environment.
• In a wireless LAN environment, the machine enters sleep mode, but does not enter deep
sleep mode.
• D
o not place any devices (especially microwave ovens o
r digital cordless telephones) that
emit weak electromagnetic waves near the machine.
• Install the machine near a wireless LAN access point or wireless device with no obstacles
between them
(the distance should be within 30m).
• Wireless connections may be difficult if there is any
metal, aluminum framed windows, or
reinforced concrete walls between the machine and the wireless LAN access point.
• Wireless LAN connections may have slower transmission speeds, depending on the
environmen
t, than wired LAN or USB connections. We recommend using a wired LAN or
a USB connection to print large amounts of data, such as photographs.
1. Switch off the printer.
2. Open the Wireless LAN I/F Cover.
3. Connect the connector of the connection cable to the Wireless LAN module.
4. Install the module to the printer.
5. Close the Wireless LAN I/F Cover.
6. Press and hold the OK but
ton
on the operator panel while turning on the printer, and
release it once BOOT MENU appears on the display panel.
7. Press the OK button
.
8. Enter the Admin password, and then press the OK button.
9. Press up or dow
n on the operator panel to display WIRELESS MODULE.
10. Press the OK button
.
11. Press the up button,
select ENABLE, and press the OK button.
12. Press the ON LI
NE button.
C
ONNECTING
VIA
WIRELESS
LAN (I
NFRASTRUCTURE
MODE
)
To choose a valid default gateway.
1. Press up or dow
n on the operator panel to display ADMIN SETUP.
2. Press the OK button
.
3. Enter the Admin password, and then press the OK button.
4. Press up or dow
n on the operator panel to display NETWORK SETUP, and then
press the OK button.
5. Press up or dow
n on the operator panel to display ENABLING DEFAULT
GATEWAY, and then press the OK button.
6. Press down on
the operator panel to display WIRELESS (INFRASTRUCTURE),
and then press the OK button.
