Instructions for use and assembly LIB006R05 Edition: 05-2005
Chapter 4/5 Child’s bicycle seat OKBABY SIRIUS Page 66 Chapter 6 Child’s bicycle seat OKBABY SIRIUS Page 67
Instructions for use and assembly LIB006R05 Edition: 05-2005
4 Product description
The seat is suitable for cycles with 26”/28” wheels and frames with a round section
diameter of 28-40 mm. It cannot be mounted on frames of a different diameter or on
oval or square section frames.
It cannot be mounted if the carrier is wider than 15 centimetres. In this case,
dismount and replace the carrier with a narrower model before mounting the seat.
The child’s seat is fitted with an “A.B.S.” system adjusting the inclination.
We invented and patented this system (Automatic Barycentre System) in order to
automatically keep the centre of gravity in the right position on the bike wheel axis,
making it even safer for you to transport your child. We have combined comfort with
easy steering.
Contact the manufacturer if you are not sure whether the seat is suitable for your
bicycle.
5 Signs and symbols
Chapter 6 describes the assembly and chapter 7 the fundamental use of the bicycle
seat.
Read these chapters carefully to understand and put the possibilities and functions
into practice.
The following terms and symbols are used:
Symbol Term Meaning
DANGER Warning of possible serious or
fatal injury to people
WARNING Warning of possible slight injury to people
or damage to things
ATTENTION Warning of possible defects and/or destruction
of the product
IIMPORTANT/NOTE An important or useful note is provided
WARNING! Follow the safety
warnings (see Chapter 1) to avoid injury
or damage due to assembly mounting
errors!
Do not use the seat if it is damaged!
IMPORTANT/NOTE: The numbers in
brackets refer to chapter 3 “Product
overview”.
IMPORTANT/NOTE: Whilst fixing the seat
to the bicycle, take care not to damage or
trap any brake wires or wires of the
bicycle’s electrical system.
Illustration 1:
Fix the backrest to the metal support.
Step 1: open the fastening cover (14).
Step 2: Lift the seat back until it rests on
the metal support (15).
Step 3: Close the fixing cover (14) and
slide it upwards to hook on the safety lever
24.
DANGER! Check that the fixing
cover is blocked by its safety lever.
If the cover opens, the child may be
moved forward and unbalance the person
riding the bicycle.
Illustration 2:
Tilt the backrest as far as it will go
pressing downwards and at the same
time rotating the knob (16).
ENGLISH
ENGLISH
6 Mounting and assembling the seat
14
24
16
15
24
