773007
4
Verklein
Vergroot
Pagina terug
1/37
Pagina verder
6.Flat Flat.7




1. Fold away Flat supports making sure that they are blocked by the lock on the side under-
neath the changing area (fig. 1).
2. Place FLAT on the cot (fig. 8), taking care to ensure that the notch is positioned over the
top-rail of the cot (fig. 14).
3. FLAT must be fixed to the top-rails of the cot by the three Velcro straps supplied, one at
the back and two at the front of the changing table.
4. Thread the strap through the slot on the bottom edge of the changing table (fig. 9), pass it
under the top-rail of the cot and secure with Velcro (fig.10). Repeat for the other two an-
chor points.

Before proceeding to use the product on a home cot, make sure that it is perfectly sup-
ported by the two top rails and that it is fastened securely with the three straps provided.
Verify the stability of FLAT before resting your child there.
The straps provided should only be used for securing the changing table to the babys cot
and should be immediately removed afterwards to avoid risk of entangling or obstruction.
If the cot has adjustable top-rails, make sure that these are completely locked into place
before using FLAT.
Do not move FLAT with the baby on it.

Always be aware of the risks associated with open flames or other sources of high heat,
such as electric hot plates, gas flames, etc., close to the changing table.
FLAT is designed for babies with a max. weight of 15 kg.
Do not use FLAT if anything appears to be broken or missing.
Clean FLAT with a soft cloth and a neutral detergent. Do not use abrasive cleaners, sol-
vents or ammonia-based products.
Any optional or spare parts must be ordered from the manufacturer or distributor.









Product dimensions: 66.2 cm x 84.6 cm x 18.3 cm.


1. Fold away Flat supports making sure that they are blocked by the lock on the side under-
neath the changing area (fig. 1).
2. Place FLAT on a flat, stable surface (fig. 2).
3. Make sure that all the non-slip feet (fig. 3) are touching the table or work surface to ensu-
re maximum stability.

FLAT cannot be positioned on all types of table.
Do not use it on tables with sliding tops, fold-away tables, single-leg tables, games tables
or collapsible tables.
Do not place towels or other items on the supporting surface that may interfere with the
proper functioning of the non-slip feet. Make sure the structure and the surface of the ta-
ble are kept clean and dry.
Do not move FLAT with the baby on it.


1. Release the side lock underneath the changing area to free FLAT supports (fig. 4).
2. Open FLAT supports completely, making sure that the red clasps hook completely into
place on the sides of the changing table (fig. 5).
3. Adjust the feet of each Flat support to the minimum width (fig.11).
4. Position FLAT over the bathtub to rest on the side edges (fig. 6).
5. Adjust the feet of the supports so that the non-slip rubber pads rest against the inside
wall of the bathtub and the suction cups rest on the top of the bathtub edges (fig. 7).
6. To close FLAT supports, press the sides of each red hook (fig. 5) pushing the changing
table’s supports inward and hook them in place on the side lock underneath the changing
area (fig. 1).

Make sure that the internal width of the bathtub, as shown in fig.15, measures at least 56 cm.
Always check that the changing table is in the correct position on the bathtub and that
the fixing devices are correctly adjusted before placing the baby on the changing table.
Position FLAT over the bathtub so that the baby cannot reach the taps.
If the bathtub is not positioned against a wall, place FLAT centrally over it (fig. 13).
Other children must not be allowed in the bathtub while the changing table is in position
for use.
Do not move FLAT with the baby on it.

4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Okbaby Flat bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Okbaby Flat in de taal/talen: Alle talen als bijlage per email.

De handleiding is 1.14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info