Handleiding Oceanic OC1 (pagina 59 van 68) (Engels)

551838

Verklein

Vergroot

Pagina terug

1/68

Pagina verder

OC1 OPERATING MANUAL

CARE AND CLEANING

Protect your OC1 from shock, excessive temperatures, exposure to chemicals, and tampering. Protect the lens against scratches

with a Instrument Lens Protector. Small scratches will naturally disappear underwater.

• Soak and rinse the OC1 in fresh water at the end of each day of diving, and check to ensure that the areas around the

Low Pressure (Depth) Sensor (Fig. 160a), PC Interface Data Port (Fig. 160b), and Buttons are free of debris or obstructions.

Soak and rinse the Regulator with the Transmitter attached.

• To dissolve salt crystals, use lukewarm water or a slightly acidic bath (50% white vinegar/50% fresh water). After removal

from the bath, place the OC1 and the Regulator with Transmitter under gently running water and towel dry before storing.

• Transport your OC1 system cool, dry, and protected.

INSPECTIONS AND SERVICE

Your OC1 should be inspected annually by an Authorized Oceanic Dealer who will perform a factory prescribed function check

and inspection for damage or wear. To keep the 2 year limited warranty in effect, this inspection must be completed one year

after purchase (+/- 30 days).

Oceanic recommends that you continue to have an inspection performed every year to ensure it is working properly. The costs of

annual inspections, or inspections relating to water tight integrity, are not covered under the terms of the 2 year limited warranty.

To Obtain Service:

Take your OC1 system to an Authorized Oceanic Dealer or send it to the nearest Oceanic Regional Facility (page xx).

To return your OC1 system to Oceanic:

• Record all dive data in the Log and/or download the data stored in memory. All data will be erased during factory service.

• Package it using a protective cushioning material.

• Include a legible note stating the speciﬁc reason for return, your name, address, daytime phone number, serial number(s),

and a copy of your original sales receipt and Warranty Registration Card.

• Send freight prepaid and insured using a traceable method to the nearest Oceanic Regional Service Facility, or to Oceanic

USA.

• If shipping to Oceanic USA, obtain an RA (Return Authorization) number by contacting Oceanic at 510/562-0500 or send

an e-mail to service@oceanicusa.com.

• Non-warranty service must be prepaid. COD is not accepted.

• Additional information is available at the Oceanic web site OceanicWorldwide.com

BATTERY REPLACEMENT

CAUTION: The procedures that follow must be closely adhered to avoid entrance of water into the

unit. Damage due to improper Battery replacement (or subsequent leakage of moisture into the unit)

is not covered by the OC1's 2 year warranty.

NOTE: The OC1 can be sent to Oceanic Worldwide, Regional Distributor, or Authorized Dealer Service

for proper battery change service which includes pressure (depth) and leak testing to the max operat-

ing depth. Standard charges for service will apply

The Battery Compartment(s) should only be opened in a dry and clean environment with extreme care taken to prevent the

entrance of moisture or dust.

As an additional precautionary measure to prevent formation of moisture in the Battery Compartment(s), it is recommended that

the Battery(s) be changed in an environment equivalent to the local outdoor temperature and humidity (e.g., do not change the

Battery(s) in an air conditioned environment then take it outside during a hot sunny day).

Inspect the Buttons, Lens, and Housing(s) to ensure they are not cracked or damaged. If there is any sign of moisture in the OC1

or Transmitter(s), DO NOT attempt to use the OC1 for diving (NORM, GAUG, or FREE) until it receives proper service by the

Oceanic factory or an Authorized Regional Distributor.

Data Retention

When the OC1 battery is removed, settings and nitrogen/oxygen calculations for repetitive dives will be retained in volatile

memory until a new battery is installed. You will have the choice of saving or deleting the data (refer to page 60). The Compass

will need to be calibrated after the new battery is installed (refer to page 54).

All parts needed for the battery change that follows are provided in the OC1 Battery Kit available at your Authorized Oceanic

Dealer as Oceanic PN 04.6175.35.

OC1 Battery Removal

• There is no need to remove the straps.

• Remove the (4) retaining screws located on the back of the watch case (Fig. 161) by turning them counter clockwise with a

small ﬂat tip 3mm screw driver.

• Carefully separate the front and back sections (Fig. 162). The Battery may fall out. DO NOT pry apart with tools.

• Turn the case to one side to drop the Battery into your hand. If necessary, gently loosen it with the tip of your ﬁnger. DO

NOT use tools to pry it out, or short the positive (+) top of the Battery (Fig. 163a) to the negative ( - ) contact under it.

• Discard the Battery according to local regulations governing disposal of Lithium batteries.

Fig. 160 - OC1 FRONT

Fig. 161 - CASE BACK

Fig. 162 - SEPARATE FRONT

AND BACK

Fig. 163 - BATT INSTALLED

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Oceanic OC1 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Oceanic OC1

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info